Re: [vdr] Wakeup On LAN
Have you tried ethtool to setup WoL options? I run ethtool -s eth0 wol pg. - Kimmo _ Alkuperäinen viesti _ Aihe: [vdr] Wakeup On LAN Tekijä: Bernd Juraschek [EMAIL PROTECTED] Päivämäärä: 3. maaliskuuta 2007 1:18:32 Hello, I'm trying to wakeup my Siemens Scaleo-T using WOL - but without success :-( The PC to wakeup: - Siemens Scaleo-T AMD64 with Onboard LAN (Tulip chip) - Linux 2.6.20 with ACPI enabled - Gentoo amd64 The router: - ASUS WL-500g Deluxe - OpenWrt White Russian - With X-Wrt Extensions RC6 - WOL-Software: wol What I've done: - BIOS: Wakeup controlled by BIOS and WOL enabled - Gentoo: echo -n PCI0 /proc/acpi/wakeup ; halt - Router: wol -h PC-IP-Addr PC-MAC-Addr I've configured the router to start wol periodically. On the PC wireshark is now showing incoming UDP packets to the UDP port 4. The packet contains the ethernet frame, the IP header, the UDP header and the magic data (6x 0xff and 16x MAC-Addr). It seems all ok - but the PC will not be started. What's going wrong? Should I use some ACPI sleep mode? Is this supported by the DVB drivers? Is the Siemens PC not usable for WOL? Thanks for help, Bernd -- Obwohl das Weltall expandiert, findet man nirgendwo Parkplätze. -- BR Space night ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Xineliboutput and G550
My G550's DVI port is connected TV's HDMI. On software side have tried xineliboutput's remote frontends. Otherwise everything is fine but I have small issues with both X and DirectFB. 1. With vdr-sxfe I seem to have some tearing effect. Does XV support sync-to-vblank? 2. With DirectFB the output seems to be limited to 16 bit colors. The pixelformat and depth values should be OK in /etc/directfbrc. Both setups are using 720p50. Any advice which one is easier to solve? And how? - Kimmo ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Xineliboutput and G550
Thanks for the answers. I also got personal mail with patch for the DirectFB color problem. With DirectFB I could not get good enough deinterlace setup. And I could not solve the tearing problem with XV. But fortunately I got very good result with vidixfb video driver. /usr/bin/vdr-fbfe --video vidixfb --fullscreen --aspect=auto --post tvtime:method=Greedy2Frame,cheap_mode=0,pulldown=0,framerate_mode=full,use_progressive_frame_flag=1 --reconnect mode 1280x720-50 # D: 74.250 MHz, H: 37.500 kHz, V: 50.000 Hz geometry 1280 720 1280 720 32 timings 13468 212 448 20 5 40 5 hsync high vsync high accel true rgba 8/16,8/8,8/0,8/24 endmode CPU load is about 35% with Athlon 2500+ XP-M. - Kimmo Petri Helin wrote: On Nov 29, 2007 6:07 PM, Kimmo Taskinen [EMAIL PROTECTED] wrote: My G550's DVI port is connected TV's HDMI. On software side have tried xineliboutput's remote frontends. Otherwise everything is fine but I have small issues with both X and DirectFB. 1. With vdr-sxfe I seem to have some tearing effect. Does XV support sync-to-vblank? Yes its does. You can use xvinfo and xvattr to see the current settings, and xvattr to set them. -Petri ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Hearing-impaired DVB subtitles
On 04 Mar 2008, at 21:17, Klaus Schmidinger wrote: On 03/04/08 19:55, Kimmo Taskinen wrote: Hi, I switched recently to vdr 1.5 series and noticed an annoying feature/ bug with DVB subtitles that was not present in vdr 1.4 series using subtitles plugin. The problem is that the subtitles for hearing impaired people are shown when watching recorded show. They are not shown if I watch the same program as direct broadcast. Isn't there any way (except completely disable subtitles) disable hearing impaired subtitles? I find it strange that it would behave differently in live and replay mode. I'm curently using 1.5.17 version with ttxtsubs and liemikuutio patches. My language selection in DVB setup menu is suomi (finnish) for both Audio and Subtitle language. Does it also happen without these patches (and any other patches, for that matter)? I tested 1.5.17 without any patches and only plugin I used was xineliboutput. I was lucky to get REALLY suitable program for testing from finnish YLE FST channel. There was a talk show where they talked in finnish and swedish. The difference between live mode and replay mode was interesting: Live mode: - talk in finnish: no subtitles - talk in swedish: finnish subtitles Replay mode: case 1 (when start from a moment there is finnish talk) - talk in finnish: swedish subtiles - talk in swedish: no subtitles OR case 2 (when start from a moment there is swedish talk) - talk in swedish: finnish subtitles - talk in finnish: swedish subtiles - talk in swedish: no subtiles anymore after finnish dialog I hope you understand. Another program (danish speaking series) from same channel. In live mode I got finnish subtitle and in replay mode subtitles were in swedish. So t seems that live mode is OK but replay mode behaves really strange. Language setup in DVB menu was still the same, suomi (finnish) for Audio and Subtitle (only one language). I can send you a sort clip if it would help you. - Kimmo Klaus ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Hearing-impaired DVB subtitles
On 04 Mar 2008, at 22:21, Kimmo Taskinen wrote: Another program (danish speaking series) from same channel. In live mode I got finnish subtitle and in replay mode subtitles were in swedish. This case is not repeatable. As I now checked this recording the subtitles were in finnish. Problem occurred twice yesterday during recording. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Hearing-impaired DVB subtitles
Klaus, I have sample for the problem explained below. Do you want/need it? It is unfortunately 68M and I don't know where to put it. Cheers, Kimmo On 04 Mar 2008, at 22:21, Kimmo Taskinen wrote: I tested 1.5.17 without any patches and only plugin I used was xineliboutput. I was lucky to get REALLY suitable program for testing from finnish YLE FST channel. There was a talk show where they talked in finnish and swedish. The difference between live mode and replay mode was interesting: Live mode: - talk in finnish: no subtitles - talk in swedish: finnish subtitles Replay mode: case 1 (replay started from a moment there is finnish talk) - talk in finnish: swedish subtiles - talk in swedish: no subtitles OR case 2 (replay started from a moment there is swedish talk) - talk in swedish: finnish subtitles - talk in finnish: swedish subtiles - talk in swedish: no subtiles anymore after finnish dialog, if replay is started from this dialog there is finnish subtitles ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Hearing-impaired DVB subtitles
info.vdr is below. _ Alkuperäinen viesti _ Aihe: Re: [vdr] Hearing-impaired DVB subtitles Tekijä: Klaus Schmidinger [EMAIL PROTECTED] Päivämäärä: 7. maaliskuuta 2008 0:39:48 On 03/06/08 06:58, Kimmo Taskinen wrote: Klaus, I have sample for the problem explained below. Do you want/need it? It is unfortunately 68M and I don't know where to put it. For starters, can you please just post the info.vdr file of this recording? C C-0-1-5 YLE FST5 E 196 1204659000 1800 4E 16 T Tuhat järveä ja yksi ankkalammikko S Osa 9/10. Vaihtoparit. Entä jos kielivähemmistön ja valtaväestön asema olisikin nurinkuri nen ja maassamme olisi kuuden prosentin suomenkielinen kielivähemmistö? Kuka olisi silloin etuoikeutettu ja miten enemmistöas X 1 04 fin X 3 11 fin X 3 11 sve X 2 03 sve Klaus On 04 Mar 2008, at 22:21, Kimmo Taskinen wrote: I tested 1.5.17 without any patches and only plugin I used was xineliboutput. I was lucky to get REALLY suitable program for testing from finnish YLE FST channel. There was a talk show where they talked in finnish and swedish. The difference between live mode and replay mode was interesting: Live mode: - talk in finnish: no subtitles - talk in swedish: finnish subtitles Replay mode: case 1 (replay started from a moment there is finnish talk) - talk in finnish: swedish subtiles - talk in swedish: no subtitles OR case 2 (replay started from a moment there is swedish talk) - talk in swedish: finnish subtitles - talk in finnish: swedish subtiles - talk in swedish: no subtiles anymore after finnish dialog, if replay is started from this dialog there is finnish subtitles ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Hearing-impaired DVB subtitles
Hi, Your patch didn't fix this problem although it changed behaviour. Subtitle language selection is now kind of inversed in replay mode. I mean that when I select finnish subtitles (suomi) I'll get swedish ones (during finnish talk and nothing during swedish talk) and the other way around if I select swedish subtitles, I'll get finnish subtitles (during swedish talk and nothing during finnish talk). Well first I suspected that the subtitle language ids were mixed in broadcast but then I tested it with new broadcast. It's info.vdr is here: C C-0-1-5 YLE FST5 E 469 1205088615 3609 4E E T Dokumentti: Tangoa, riitoja ja reumasärkyä S Hans ja Kerstin ovat olleet 50 vuotta naimisissa. Nyt on ikä alkanut painaa mutta Kerstin on kuitenkin valmis kokeilemaan jotakin uutta joka piristäisi heitä kumpaakin. Toimittaja Jerzy Sladkowski, SVT/Ruot X 1 04 fin X 3 11 fin X 3 11 sve X 2 03 sve Everything was OK in live mode (I got finnish subtitles as I had selected them) but during replay I got swedish subtitles. If I selected swedish subtitles from DVB setup then I got finnish subtitles during replay but nothing during live mode (it was swedish spoken document). - Kimmo Klaus Schmidinger wrote: On 03/07/08 18:46, Kimmo Taskinen wrote: info.vdr is below. Your problem most likely has the same cause as the other one. Please try the patch I posted earlier today. Klaus _ Alkuperäinen viesti _ Aihe: Re: [vdr] Hearing-impaired DVB subtitles Tekijä: Klaus Schmidinger [EMAIL PROTECTED] Päivämäärä: 7. maaliskuuta 2008 0:39:48 On 03/06/08 06:58, Kimmo Taskinen wrote: Klaus, I have sample for the problem explained below. Do you want/need it? It is unfortunately 68M and I don't know where to put it. For starters, can you please just post the info.vdr file of this recording? C C-0-1-5 YLE FST5 E 196 1204659000 1800 4E 16 T Tuhat järveä ja yksi ankkalammikko S Osa 9/10. Vaihtoparit. Entä jos kielivähemmistön ja valtaväestön asema olisikin nurinkuri nen ja maassamme olisi kuuden prosentin suomenkielinen kielivähemmistö? Kuka olisi silloin etuoikeutettu ja miten enemmistöas X 1 04 fin X 3 11 fin X 3 11 sve X 2 03 sve Klaus On 04 Mar 2008, at 22:21, Kimmo Taskinen wrote: I tested 1.5.17 without any patches and only plugin I used was xineliboutput. I was lucky to get REALLY suitable program for testing from finnish YLE FST channel. There was a talk show where they talked in finnish and swedish. The difference between live mode and replay mode was interesting: Live mode: - talk in finnish: no subtitles - talk in swedish: finnish subtitles Replay mode: case 1 (replay started from a moment there is finnish talk) - talk in finnish: swedish subtiles - talk in swedish: no subtitles OR case 2 (replay started from a moment there is swedish talk) - talk in swedish: finnish subtitles - talk in finnish: swedish subtiles - talk in swedish: no subtiles anymore after finnish dialog, if replay is started from this dialog there is finnish subtitles ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Hearing-impaired DVB subtitles
On 09 Mar 2008, at 23:54, Petri Helin wrote: Klaus Schmidinger wrote: On 03/09/08 22:09, Kimmo Taskinen wrote: On 09 Mar 2008, at 21:32, Klaus Schmidinger wrote: On 03/09/08 20:17, Kimmo Taskinen wrote: ... Everything was OK in live mode (I got finnish subtitles as I had selected them) but during replay I got swedish subtitles. If I selected swedish subtitles from DVB setup then I got finnish subtitles during replay but nothing during live mode (it was swedish spoken document). Can you please post the PID settings during that broadcast? There should be a line like changing pids of channel 6 from 201+201:202=deu,203=2ch:0:204 to 201+201:202=deu,203=2ch;206=dd:0:204 in your syslog somewhere before the recording started. Klaus Unfortunately I had log level set to 0 and there wasn't PID settings in /var/log/messages. So here is info from new test. changing pids of channel 8 from 514+514:670=eng:0:2321 to 514+514:670=eng:3028=sve,3027=fin:2321 and info.vdr: C C-0-1-5 YLE FST5 E 471 1205093700 3419 4E 10 T Jools Holland show S Brittiläistä musiikkiviihdettä. Illan vieraat: Arctic Monkeys, CSS, Bryan Ferry, Tinariwen, Henri Salvadore, The Hold Steady. Tuotanto: BBC, 3DD ja Baker Street. X 1 04 fin X 3 11 fin X 3 11 sve X 2 03 eng Test result: live mode: finnish subs replay mode: swedish subs - Kimmo In the PID settings they have the first audio PID set to sve and the second one to fin, while in the EPG data it's the other way round. In live mode the PID data is used when selecting the audio track, while in replay mode the EPG data takes precedence. I just wonder why Petri Helin (see his recent posting in this thread) gets correct behavior. @Petri: can you please also post the PID and info data you get? Here are the contents of the info.vdr: C C-0-1-81 FST5 E 469 1205088615 3609 4E E T Dokumentti: Tangoa, riitoja ja reumasärkyä D Hans ja Kerstin ovat olleet 50 vuotta naimisissa. Nyt on ikä alkanut painaa mutta Kerstin on kuitenkin valmis kokeilemaan jotakin uutta joka piristäisi heitä kumpaakin. Toimittaja Jerzy Sladkowski, SVT/Ruot X 1 04 fin X 3 11 fin X 3 11 sve X 2 03 sve And here are the entries in the vdr log regarding the channel and programme in question: Mar 9 18:15:30 vdrkone2 vdr: [4379] changing pids of channel 8 from 514+514:670=sve:0:2321 to 514+514:670=sve:3027=fin,3028=sve:2321 Mar 9 21:35:11 vdrkone2 vdr: [4299] Title: 'Dokumentti: Tangoa, riitoja ja reumasärkyä' Subtitle: '(null)' Mar 9 21:35:11 vdrkone2 vdr: [4299] record /video/@Dokumentti:_Tangoa,_riitoja_ja_reumasärkyä/ 2008-03-09.21.35.50.99.rec Mar 9 21:35:11 vdrkone2 vdr: [4299] creating directory /video/@Dokumentti:_Tangoa,_riitoja_ja_reumasärkyä Mar 9 21:35:11 vdrkone2 vdr: [4299] creating directory /video/@Dokumentti:_Tangoa,_riitoja_ja_reumasärkyä/ 2008-03-09.21.35.50.99.rec Mar 9 21:35:12 vdrkone2 vdr: [4299] recording to '/video/@Dokumentti:_Tangoa,_riitoja_ja_reumasärkyä/ 2008-03-09.21.35.50.99.rec/001.vdr' Mar 9 21:35:17 vdrkone2 vdr: [4299] timer 6 (8 2135-0035 '@Dokumentti: Tangoa, riitoja ja reumasärkyä') set to event Su 09.03.2008 22:15-23:11 'Jools Holland show' Mar 9 21:35:58 vdrkone2 vdr: [4299] timer 6 (8 2135-0035 '@Dokumentti: Tangoa, riitoja ja reumasärkyä') stop Mar 9 21:35:58 vdrkone2 vdr: [4299] deleting timer 6 (8 2135-0035 '@Dokumentti: Tangoa, riitoja ja reumasärkyä') M Could you Kimmo tell the exact steps you take in order to get the behaviour you are seeing when replaying the record? -Petri ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr Exact steps? Nothing special, I guess. I use gentoo vdr scripts to start vdr. Recording was started as instant recording with remote (no timer) during program. I recorded short test snapshots several times. I tested replay both both during the recording and after recording (not difference) but I didn't test it after the program was finished completely. I am using DVB-C at Kuopio. - Kimmo. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] Wrong subtitles in replay mode (vdr-1.5.18)
I still get wrong subtitles in replay mode. Here are two examples: 1) Mar 17 20:25:25 htpc vdr: [18941] changing pids of channel 8 from 514+514:670=sve:3028=sve,3027=fin:2321 to 514+514:670=sve:3039=dut, 3028=sve,3027=fin:2321 /mnt/sdb1/video/@Strömsö_Strömsön_kausi_alkaa_avotulella_kokka/ 2008-03-17.20.29.50.99.rec/info.vdr C C-0-1-5 YLE FST5 E 277 1205778315 2392 4E 14 T Strömsö S Strömsön kausi alkaa avotulella kokkailun merkeissä. Luvassa on rieskaa, poronkäristystä ja puolukkajuomaa. Tapaamme myös Ahmed Ladarsin, joka on maan suurin mämmi-intoilija. Juontaja: Matias Jungar. stromso.yle.fi. Toinen lähetys. X 1 04 fin X 3 11 fin X 3 11 sve X 2 03 sve X 3 03 fin Live mode: finnish subtitles OK Replay mode: Hearing impaired subtitles in swedish :-( 2) Mar 17 21:01:42 htpc vdr: [18941] changing pids of channel 1 from 512+512:650=fin:1027=fin:2321 to 512+512:650=fin:1028=dut,1027=fin:2321 /mnt/sdb1/video/Kotikatsomo\:_Harvoin_tarjolla/10~12\:_ \Lyytinmäkihän_on_ollu_meillä/2008-03-17.20.58.50.99.rec/.vdr C C-0-1-1 YLE TV1 E 598 1205780417 3283 4E 17 T Kotikatsomo: Harvoin tarjolla S 10/12: Lyytinmäkihän on ollu meillä lautakunnassa aiheena ja kohteena, kun oli sitä hoitokotia ja adressia ja ties mitä liito- oravaa, ett tavallaan se ei oo mikään ihme, että jotkut tahot alko vähän kehitellä. Teksti- X 1 04 fin X 3 11 fin X 2 03 fin X 3 03 fin @ epgsearchchannel1 - YLE TV1/channelsearchtimerKotikatsomo: Harvoin tarjolla/searchtimerstart1205780297/ startstop1205784060/stops-id59/s-ideventid598/eventid/ epgsearch Live mode: n subtitles, OK Replay mode: Hearing impaired subtitles in finnish :-( - Kimmo On 16 Mar 2008, at 13:54, Klaus Schmidinger wrote: The changes since version 1.5.17: ... - Fixed automatically selecting the preferred subtitle language (based on a patch from Rolf Ahrenberg). *When reporting problems, please don't reply to this message!* Create a new thread instead, using a descriptive subject! Have fun! Klaus ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Xineliboutput segmentation fault
This probably isn't anyhow related to this thread but I get following messages in dmesg output: vdr-fbfe[21775]: segfault at 04d0 eip b7207719 esp bfd4c9e0 error 4 vdr-fbfe[22134]: segfault at 04d0 eip b720a719 esp bfcfa190 error 4 It's not a big problem as it's only related to exiting the frontend either with keyboard ESC or killall vdr-sxfe. It's the yesterday's cvs version. I can't say when did it start. -Kimmo On 08 May 2008, at 11:07, Petri Helin wrote: Graziano Pavone wrote: 2008/5/7 Petri Helin [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] : Could you update xineliboutput from the cvs and try again? In case you still see the same behaviour, attach your setup.conf (or just the xineliboutput subset) and ~/.xine/config_xineliboutput and tell the exact command you use to start vdr-sxfe. For your information, I use vdr-sxfe with the current cvs and I don't experience any problems with cropping. -Petri I will try with the CVS version, anyway I don't think it's xineliboutput fault, since it's working on the main PC (also with crop enabled). I suspect it's some dependencies missing on the client... The obvious one to check is that you have the autocrop post plugin in place: ls `xine-config --plugindir`/post/xineplug_post_autocrop.so You could start vdr-sxfe with argument --verbose and see if there are any complaints in the output. -Petri ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] vdr-sxfe + remote control
Hi, I'm not quite sure if I understood your problem right. So you get the right codes with irw and have put them on remote.conf. remotes.conf as you wrote is not right place. Do you start vdr with --lirc option? If you use --lirc for vdr-sxfe you should give --lirc to vdr (at least I don't). cheers, Kimmo On 17 Jan 2009, at 17:32, Alex Betis wrote: Hello all, Please help me with remote control configuration since I'm breaking my head on a wall for more than a week already. RC is the only thing at the moment that stops me using the VDR as my main TV source. I've bought a nifty (and cheap) remote and a nice USB receiver. Looks like a clone of MCE remote. It has a small joystick to control the mouse. The USB receiver pass keyboard and mouse events to the system, so I can use it instead of my keyboard without any LIRC configuration. BUT, I do want to use LIRC since I want to bound one of the buttons for other tasks (such as switching to XBMC or running vdr-sxfe to pass sound to my sound system instead of the TV). irw works ok. I've set /etc/lircrc to pass the commands to vdr-sxfe and ircat shows them successfuly. I've added some commands such as LIRC.Volume+ and LIRC.Volume- manually to remotes.conf, but it doesn't really help. I can run vdr-sxfe with --lirc and see that it receives the codes direcly without my lircrc configuration, but it will miss many features since some of the RC buttins send sequnce of keys, which can be catched using lircrc configuration. Without specifying --lirc, vdr-sxfe seems to receive the keyboard commands instead the commands from LIRC. Can anyone help me please? People who have the original MCE remote, does your IR receiver also pass keyboard commands to the system? I saw that as soon as there is a connection to lircd (such as with irw or ircat) the keyboard events are not passed the system any more and that's good, but vdr-sxfe doesn't connect unless I'll use the -- lirc switch. I'm stuck with that. Any help will be appreciated. Thanks. ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] vdr-sxfe + remote control
You're right. It was my typo as I was suppose to write If you use -- lirc for vdr-sxfe you should NOT give --lirc to vdr (at least I don't).. Sorry. On 17 Jan 2009, at 22:28, Gerald Dachs wrote: Do you start vdr with --lirc option? If you use --lirc for vdr-sxfe you should give --lirc to vdr (at least I don't). No, that will not work. If you give both vdr and vdr-sxfe the option --lirc you will get every action twice. I use the option --lirc with vdr-sxfe and the option --lirc=/dev/null with vdr, so that I can use lirc with xbmc after I have stopped vdr-sxfe without stopping vdr. Gerald ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] [OT] NVidia ION mini-ITX arriving
Magnus, What kind of remote controller / IR receiver are you using? Does it have integrated receiver supporting lirc? - Kimmo On 16 May 2009, at 13:55, Magnus Hörlin wrote: Well, my first imressions of the ION platform (Acer Revo) are very good. It does the vdpau deinterlacing without problems and so far the video decoding has not exceeded 1% cpu load for ANY 1080p clip I've tried. This is the best VDR frontend/XBMC machine I've ever tried. I don't know why, but it works better than my Intel E7200/Nvidia 9400 uATX board. For those interested it uses 34W from 220V with the hdd still attached. I don't know if it's using any power though, since I've disabled SATA in the bios because I boot it off the network. Anyone who knows how to open this wonderful little thing? /Magnus H ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] FullHD OSD problem
Hi, I am still using 1.6.0-2 and have patched it for FullHD OSD (http://www.vdrportal.de/board/thread.php?threadid=79647threadview=0hilight=hilightuser=0page=1 ). Frontend is xineliboutput-cvs (vdr-sxfe in other computer; tcp connection) and skinenigmang-0.1.0 is in use. Everything seems fine except that if I use antialiased fonts there is one problem that I have noticed only with epgsearch plugin Schedule view. The problem is that Schedule is not shown if the OSD should be really full. With short EPG info the schedule is shown. The problem seems to be in buffering as I get following message in / var/log/messages: Aug 25 18:04:35 server vdr: [7573] [xine..put] write_osd_command: socket buffer full, OSD send skipped (got 262142 ; need 302366 256k seems to be the limit. Is it the problem in vdr, xineliboutput, epgsearch or somewhere else? OK I understand that these versions were not designed for fullHD support but anyways it would be nice fix this. I can avoid problem by disabling anti-alias fonts or setting Try 8bpp single area: no from skinenigmang options. - Kimmo ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] vdpau experience
Hi, I noticed couple of issues with vdpau extention patch set v11: xineliboutput-cvs-20091013-vdpau-extensions-v11.diff.gz xine-lib-1.2-vdpau-r284-extensions-v11.diff.gz 1. Cropping is not reseted if I switch to 16:9 channel that has the same resolution as 4:3 channel that has turn on the cropping. 2. DVB subtitles are not positioned correctly during cropping if vdr- sxfe is used to show subtitles. Vertical alignment is about at half of the screen. Cheers Kimmo On 24 Oct 2009, at 14:54, Thomas Hilber wrote: On Sat, Oct 24, 2009 at 01:22:42PM +0200, Helmut Auer wrote: xineliboutput is a bit more difficult, because the cvs is changing nearly daily, so there is currently no patch available, but it should work without patches. where is the problem? Just do an cvs -z3 -d:pserver:anonym...@xineliboutput.cvs.sourceforge.net:/ cvsroot/xineliboutput co -D '2009/10/13 12:00:00' vdr-xineliboutput and you are fine with current 'xineliboutput-cvs-20091013-vdpau- extensions-v11.diff.gz' Cheers Thomas ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
[vdr] xineliboutput vdpau crop
Hi, Couple of issues I reported earlier (see below) have now merged to xineliboutput-plugin. xine-lib and xineliboutput are built today with these ebuilds http://www.kosunen.fi/gentoo/portage/media-libs/xine-lib/xine-lib-1.2..ebuild http://www.kosunen.fi/gentoo/portage/media-plugins/vdr-xineliboutput/vdr-xineliboutput-1.0..ebuild - Kimmo On 28 Oct 2009, at 19:56, Kimmo Taskinen wrote: Hi, I noticed couple of issues with vdpau extention patch set v11: xineliboutput-cvs-20091013-vdpau-extensions-v11.diff.gz xine-lib-1.2-vdpau-r284-extensions-v11.diff.gz 1. Cropping is not reseted if I switch to 16:9 channel that has the same resolution as 4:3 channel that has turned on the cropping. 2. DVB subtitles are not positioned correctly during cropping if vdr-sxfe is used to show subtitles. Vertical alignment is about at half of the screen. Cheers Kimmo On 24 Oct 2009, at 14:54, Thomas Hilber wrote: On Sat, Oct 24, 2009 at 01:22:42PM +0200, Helmut Auer wrote: xineliboutput is a bit more difficult, because the cvs is changing nearly daily, so there is currently no patch available, but it should work without patches. where is the problem? Just do an cvs -z3 -d:pserver:anonym...@xineliboutput.cvs.sourceforge.net:/cvsroot/xineliboutput co -D '2009/10/13 12:00:00' vdr-xineliboutput and you are fine with current 'xineliboutput-cvs-20091013-vdpau-extensions-v11.diff.gz' Cheers Thomas ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] xineliboutput vdpau crop
Hi, Yes, I'm using VDPAU. And YES the patch seemed to fix issue 2, at least subtitles are much better positioned during cropping. Thanks. Issue 1 still remains. The problem is easy to notice at Welho network (Helsinki) when switching channel between TV5MONDE (often 4:3 letterbox) and Deutsche Welle (16:9). DW remains cropped when switched from TV5MONDE and the cropping was turned on for it. - Kimmo On 03 Jan 2010, at 22:30, Petri Hintukainen wrote: Kimmo Taskinen wrote: Hi, Couple of issues I reported earlier (see below) have now merged to xineliboutput-plugin. [...] 1. Cropping is not reseted if I switch to 16:9 channel that has the same resolution as 4:3 channel that has turned on the cropping. 2. DVB subtitles are not positioned correctly during cropping if vdr-sxfe is used to show subtitles. Vertical alignment is about at half of the screen. Are you using vdpau ? Does the attached patch fix issue 2 ? - Petri autocrop_spu_overlay.diff___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr
Re: [vdr] Wanted VDR xineliboutput client
hi, I ordered this one (with SSD drive) for the same purpose: Shuttle Barebone XS35GT V2 but no experience yet... Kimmo Sent from my iPad On 16.10.2011, at 14.02, JJussi v...@jjussi.com wrote: Hi! Any suggestions for small, powerful, quiet, FullHD VDR client? So, I search machine what would act as VDR-client, using xineliboutput with FullHD resolution and machine would have DVI or HDMI connection + optical audio. Of course remote control is needed too! ;-) -- JJussi ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr ___ vdr mailing list vdr@linuxtv.org http://www.linuxtv.org/cgi-bin/mailman/listinfo/vdr