Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
On Fri, 19 Oct 2018, John wrote: Hisashi, When you started with Mojave, did you visit the Audio tab (WSJT-X > Preferences) and select your preferred Audio stream - USB Audio Codec or similar? What Audio link do you use between your rig (whicg rig?) and your computer? Yes. It's USB Audio just like in 1.9.1. I checked that early on. -- Hisashi T Fujinaka - ht...@twofifty.com BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3 on MacOS
(I should have replied to this thread instead of the general rc3 thread) For Mac Users: I have installed MacOS Mojave on a spare drive and discovered a problem with sound input. Mac users with Mojave need to know that by default sound input is not permitted. (Apple’s security gone over the top…) Until RC4, to use FT8 do this: 1. Download RC3 and drag WSJT-X to the Desktop - NOT the application folder. 2.Open a Terminal window (Aplications > Utilities > Terminal) and then type this and press the Return key: ~/Desktop/wsjtx.app/Contents/MacOS/wsjtx and wsjtx will launch. 3.Open System Preferences > Security & Privacy and select Privacy. In the drop down list select Microphone and you should see a list of apps including wsjtx. Check the Allow box for wsjtx, then quit wsjtx and start again by repeating the command line above. You should be getting sound input and FT8 should be working. — John G4KLA smime.p7s Description: S/MIME cryptographic signature ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
For Mac Users: I have installed MacOS Mojave on a spare drive and discovered a problem with sound input. Mac users with Mojave need to know that by default sound input is not permitted. (Apple’s security gone over the top…) Until RC4, to use FT8 do this: 1. Download RC3 and drag WSJT-X to the Desktop - NOT the application folder. 2.Open a Terminal window (Aplications > Utilities > Terminal) and then type this and press the Return key: ~/Desktop/wsjtx.app/Contents/MacOS/wsjtx and wsjtx will launch. 3.Open System Preferences > Security & Privacy and select Privacy. In the drop down list select Microphone and you should see a list of apps including wsjtx. Check the Allow box for wsjtx, then quit wsjtx and start again by repeating the command line above. You should be getting sound input and FT8 should be working. — John G4KLA smime.p7s Description: S/MIME cryptographic signature ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3 on MacOS SUBPROCESS ERROR EXIT CODE 2?
Hi Sean, I have replied off-list to your email. — John G4KLA smime.p7s Description: S/MIME cryptographic signature ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3 on MacOS SUBPROCESS ERROR EXIT CODE 2?
HI John, Hope all is well at your end. I’ve just given WSJT-X_2.0.0-rc3 a try with my MacPro, OS 10.11.6 El Capitan but I’m having trouble when the software tries to go into transmit during a QSO. I get the following error, Subprocess Error failed with exit code 2. The details box shows the follow info, Running: /Applications/wsjtx.app/Contents/MacOS/jt9 -s WSJT-X -w 1 -m 3 -e /Applications/wsjtx.app/Contents/MacOS -a "/Users/g0oan/Library/Application Support/WSJT-X" -t /var/folders/mg/zr0cp7_d0kxfvs2q1qrvbnn0gn/T/WSJT-X At line 145 of file /Users/bill/wsjtx-prefix/src/lib/ft8_decode.f90 (unit = 81) Fortran runtime error: Cannot open file 'fort.81': Permission denied Error termination. Backtrace: #0 0x109ee2986 #1 0x109ee3258 #2 0x109ee38bc #3 0x109f63b9a #4 0x109f6834d #5 0x101d995a8 #6 0x101dcc0d9 As you can see it in some way traces back to some kind of Fortran runtime error? Might also be worth noting that the TUNE button works as expected ie the right happily goes in and out of Tx. The error only seems t arise when I’m trying to transmit as part of a QSO with the ENABLE TX button pressed. Hope this helps. Kind regards, Sean G0OAN. PS. When you get a mo I wouldn’t mind having a conversation about compiling WSJT-X for the Mac with the SDR kit enabled in HamLib. :) ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3 on MacOS
Georg, > ..keeps crashing on launch. It would help if you give me some error messages; which mode were you using? Note that other users are running wsjtx on Mojave so I suspect that there is something else problematic with your setup rather than the version of OSX. — John G4KLA smime.p7s Description: S/MIME cryptographic signature ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3 on MacOS
...keeps crashing on launch. Installed it on the desktop and launched it from the command line. Could be Mojave related... > Am 19.10.2018 um 18:33 schrieb Hisashi T Fujinaka : > > So no one else on the Mojave is having audio issues? Going back to 1.9.1 > worked fine. > > The odd part is that Mojave asked to use the Microphone (which it never > did with RC2 or 1.9.1). > > I had RC2 and installed RC3 and it asked to use the microphone. No joy. > > So I found a copy of 1.9.1, renamed it, and ran that. Worked fine. > > I reinstalled (copied) RC3 from the dmg and it asked to use the > microphone again. Still no audio. > > I went back to 1.9.1 and it asked to use the microphone there too. > > I think Mojave is confused. > > On Wed, 17 Oct 2018, Hisashi T Fujinaka wrote: > >> Mine doesn't hear anything even after starting from the command line. >> >> On Wed, 17 Oct 2018, Steven Franke via wsjt-devel wrote: >> >>> Hi John - It looks like I forgot to comment out a debug print to fort.81. >>> On the Mac, you can get around this by running from within the application >>> bundle. For example, my install directory is ~/Builds/wsjtx/install, so I >>> would do this to run wsjtx: >>> cd ~/Builds/wsjtx/install/wsjtx.app/Contents/MacOS >>> ./wsjtx >>> Steve On Oct 17, 2018, at 10:31 AM, John wrote: Hi Bill, Problem on my MacBook. Running: /Users/jmn/Desktop/wsjtx.app/Contents/MacOS/jt9 -s WSJT-X -w 1 -m 3 -e /Users/jmn/Desktop/wsjtx.app/Contents/MacOS -a "/Users/jmn/Library/Application Support/WSJT-X" -t /var/folders/vv/5c1b7szs1bgbr65gkt6y0gnhgn/T/WSJT-X At line 145 of file /Users/bill/wsjtx-prefix/src/lib/ft8_decode.f90 (unit = 81) Fortran runtime error: Cannot open file 'fort.81': Permission denied This is repeatable when I use FT8 mode. It appears near the end of the first decode sequence.In the temporary file: WSJT-X I find decoded.txt has been created but is empty. Permissions are OK. ? John G4KLA ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> ___ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> >> > > -- > Hisashi T Fujinaka - ht...@twofifty.com > BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Hisashi, When you started with Mojave, did you visit the Audio tab (WSJT-X > Preferences) and select your preferred Audio stream - USB Audio Codec or similar? What Audio link do you use between your rig (whicg rig?) and your computer? — John G4KLA smime.p7s Description: S/MIME cryptographic signature ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
So no one else on the Mojave is having audio issues? Going back to 1.9.1 worked fine. The odd part is that Mojave asked to use the Microphone (which it never did with RC2 or 1.9.1). I had RC2 and installed RC3 and it asked to use the microphone. No joy. So I found a copy of 1.9.1, renamed it, and ran that. Worked fine. I reinstalled (copied) RC3 from the dmg and it asked to use the microphone again. Still no audio. I went back to 1.9.1 and it asked to use the microphone there too. I think Mojave is confused. On Wed, 17 Oct 2018, Hisashi T Fujinaka wrote: Mine doesn't hear anything even after starting from the command line. On Wed, 17 Oct 2018, Steven Franke via wsjt-devel wrote: Hi John - It looks like I forgot to comment out a debug print to fort.81. On the Mac, you can get around this by running from within the application bundle. For example, my install directory is ~/Builds/wsjtx/install, so I would do this to run wsjtx: cd ~/Builds/wsjtx/install/wsjtx.app/Contents/MacOS ./wsjtx Steve On Oct 17, 2018, at 10:31 AM, John wrote: Hi Bill, Problem on my MacBook. Running: /Users/jmn/Desktop/wsjtx.app/Contents/MacOS/jt9 -s WSJT-X -w 1 -m 3 -e /Users/jmn/Desktop/wsjtx.app/Contents/MacOS -a "/Users/jmn/Library/Application Support/WSJT-X" -t /var/folders/vv/5c1b7szs1bgbr65gkt6y0gnhgn/T/WSJT-X At line 145 of file /Users/bill/wsjtx-prefix/src/lib/ft8_decode.f90 (unit = 81) Fortran runtime error: Cannot open file 'fort.81': Permission denied This is repeatable when I use FT8 mode. It appears near the end of the first decode sequence.In the temporary file: WSJT-X I find decoded.txt has been created but is empty. Permissions are OK. ? John G4KLA ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- Hisashi T Fujinaka - ht...@twofifty.com BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Mine doesn't hear anything even after starting from the command line. On Wed, 17 Oct 2018, Steven Franke via wsjt-devel wrote: Hi John - It looks like I forgot to comment out a debug print to fort.81. On the Mac, you can get around this by running from within the application bundle. For example, my install directory is ~/Builds/wsjtx/install, so I would do this to run wsjtx: cd ~/Builds/wsjtx/install/wsjtx.app/Contents/MacOS ./wsjtx Steve On Oct 17, 2018, at 10:31 AM, John wrote: Hi Bill, Problem on my MacBook. Running: /Users/jmn/Desktop/wsjtx.app/Contents/MacOS/jt9 -s WSJT-X -w 1 -m 3 -e /Users/jmn/Desktop/wsjtx.app/Contents/MacOS -a "/Users/jmn/Library/Application Support/WSJT-X" -t /var/folders/vv/5c1b7szs1bgbr65gkt6y0gnhgn/T/WSJT-X At line 145 of file /Users/bill/wsjtx-prefix/src/lib/ft8_decode.f90 (unit = 81) Fortran runtime error: Cannot open file 'fort.81': Permission denied This is repeatable when I use FT8 mode. It appears near the end of the first decode sequence.In the temporary file: WSJT-X I find decoded.txt has been created but is empty. Permissions are OK. ? John G4KLA ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- Hisashi T Fujinaka - ht...@twofifty.com BSEE + BSChem + BAEnglish + MSCS + $2.50 = coffee ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Same. Not found. On Wed, Oct 17, 2018 at 12:39 PM Jari A wrote: > > C:\>where libeay32.dll > INFO: Could not find files for the given pattern(s). > > Rgds, > > :Jari / oh2fqv > > On Wed, Oct 17, 2018 at 7:18 PM Jari A wrote: > >> Hi Bill, >> >> All boxes are check, after restart rc3, I got amber to appear from cq >> station, no other colors yet. >> >> Rgds, >> >> :Jari / oh2fqv >> >> On Wed, Oct 17, 2018 at 7:14 PM Bill Somerville >> wrote: >> >>> On 17/10/2018 17:06, Jari A wrote: >>> > LOTW error at start and when I press "Fetch now" on colors. Problem >>> > appears with colors, I see only white, turquoise and green, no other >>> > colors appear. Reset didnt help >>> > >>> > Win 7 pro, 64bit >>> > >>> > Rgds, >>> > >>> > :Jari / oh2fqv >>> >>> Hi Jari, >>> >>> highlighting colours are now optional, you can disable or enable them >>> individually in "Settings->Colors" with the check boxes. Are the missing >>> colours disabled? >>> >>> 73 >>> Bill >>> G4WJS. >>> >>> >>> >>> ___ >>> wsjt-devel mailing list >>> wsjt-devel@lists.sourceforge.net >>> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >>> >> ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- George Cotton, WB5JJJ PO Box 1025 Russellville, AR 72811 479.968.7737 Home 479.857.7737 Cell DMR K5CS (Local Repeater) - 310515, CC1, TS2 DMR Arkansas - 3105 4 ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
C:\>where libeay32.dll INFO: Could not find files for the given pattern(s). Rgds, :Jari / oh2fqv On Wed, Oct 17, 2018 at 7:18 PM Jari A wrote: > Hi Bill, > > All boxes are check, after restart rc3, I got amber to appear from cq > station, no other colors yet. > > Rgds, > > :Jari / oh2fqv > > On Wed, Oct 17, 2018 at 7:14 PM Bill Somerville > wrote: > >> On 17/10/2018 17:06, Jari A wrote: >> > LOTW error at start and when I press "Fetch now" on colors. Problem >> > appears with colors, I see only white, turquoise and green, no other >> > colors appear. Reset didnt help >> > >> > Win 7 pro, 64bit >> > >> > Rgds, >> > >> > :Jari / oh2fqv >> >> Hi Jari, >> >> highlighting colours are now optional, you can disable or enable them >> individually in "Settings->Colors" with the check boxes. Are the missing >> colours disabled? >> >> 73 >> Bill >> G4WJS. >> >> >> >> ___ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Hi Glen, On 10/17/2018 1:02 PM, Glen Brown wrote: Joe and the Team, It might be helpful if you clarify for everyone that the Ducie expedition expects everyone to use 1.9.1. This is even more important now that rc3 forces 77 bit encoding for Expedition mode. 73, Glen W6GJB From the "Quick-Start Guide to WSJT-X 2.0", posted here http://physics.princeton.edu/pulsar/k1jt/Quick_Start_WSJT-X_2.0.pdf At the bottom of page 2: "We recommend that any serious use of DXpedition mode should use WSJT-X v1.9.1 until December 10, 2018, and WSJT-X 2.0 thereafter." This applies equally to both Fox and Hound. -- 73, Joe, K1JT ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Joe and the Team, It might be helpful if you clarify for everyone that the Ducie expedition expects everyone to use 1.9.1. This is even more important now that rc3 forces 77 bit encoding for Expedition mode. 73, Glen W6GJB On Wed, Oct 17, 2018 at 7:13 AM Joe Taylor wrote: > A third candidate release ("RC3") of WSJT-X 2.0 is now available for > download and use by beta testers. > > Changes in RC3 relative to RC2 include the following: > > 1 Improved SNR calculation for FT8 > 2 Test grid4 (not grid6) for matches in ADIF log > 3 Auto-generate 77-bit messages for callsigns with /R or /P > 4 Fix auto-sequencing for "CQ ABC ...", "CQ ABCD ...", etc. > 5 Fix the "CQ RU RU ..." bug > 6 Implement AP decoding for contest messages and for Hound > 7 Check Field Day and RTTY Roundup exchanges for validity > 8 Implement "Select next caller" and use of the "TU; ..." messages > 9 Option to "Auto Log" in contests > 10 Real-time display of contest log > 11 Contest exchanges sent to the ADIF log and N1MM+ > 12 Function to export a Cabrillo log, ready for submission > 13 Convert DXpedition mode to always use 77-bit messages > 14 Fix bug associated with opening file "houndcallers.txt" > 15 Remove end-of-line numbers from MSK144 decodes > 16 Finish MSK144 encoding/decoding for Sh msgs and nonstandard calls > 17 Halt Tx before resetting power after Tune > 18 Auto update of LoTW info, and faster program startup > > The "Quick-Start Guide to WSJT-X 2.0" has been updated and extended. If > you plan to use the beta-test release candidate RC3, be sure to read > this entire guide first: > http://physics.princeton.edu/pulsar/k1jt/Quick_Start_WSJT-X_2.0.pdf > > Changes in RC3 relative to RC2 are described in a new section starting > on page 7. > > Download links for RC3 on Windows, Linux, and macOS can be found on the > WSJT-X web site > http://physics.princeton.edu/pulsar/k1jt/wsjtx.html > > A one-hour "FT8 mock contest" will be held next week: Thursday, October > 25, 0200-0300 UTC (that's Wednesday evening, NA time). Watch for a > separate announcement with more details. > > We look forward to your feedback on WSJT-X 2.0-rc3. Please help us by > testing all new features, including especially the contest-oriented > messages and the new MSK144 protocol. Reports should be sent to the > wsjt-devel email list, wsjt-devel@lists.sourceforge.net. You must > subscribe to the list in order to post there. > > -- 73, Joe, K1JT (for the WSJT Development Group) > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
On 17/10/2018 17:18, Jari A wrote: Hi Bill, All boxes are check, after restart rc3, I got amber to appear from cq station, no other colors yet. Rgds, :Jari / oh2fqv Hi Jari, there's no need to restart after changing Settings in WSJT-X, just click Ok and any Settings changes go live. Highlighting changes only apply to new decodes received after the change is accepted. 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Hi Bill, All boxes are check, after restart rc3, I got amber to appear from cq station, no other colors yet. Rgds, :Jari / oh2fqv On Wed, Oct 17, 2018 at 7:14 PM Bill Somerville wrote: > On 17/10/2018 17:06, Jari A wrote: > > LOTW error at start and when I press "Fetch now" on colors. Problem > > appears with colors, I see only white, turquoise and green, no other > > colors appear. Reset didnt help > > > > Win 7 pro, 64bit > > > > Rgds, > > > > :Jari / oh2fqv > > Hi Jari, > > highlighting colours are now optional, you can disable or enable them > individually in "Settings->Colors" with the check boxes. Are the missing > colours disabled? > > 73 > Bill > G4WJS. > > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
On 17/10/2018 17:06, Jari A wrote: LOTW error at start and when I press "Fetch now" on colors. Problem appears with colors, I see only white, turquoise and green, no other colors appear. Reset didnt help Win 7 pro, 64bit Rgds, :Jari / oh2fqv Hi Jari, highlighting colours are now optional, you can disable or enable them individually in "Settings->Colors" with the check boxes. Are the missing colours disabled? 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
LOTW error at start and when I press "Fetch now" on colors. Problem appears with colors, I see only white, turquoise and green, no other colors appear. Reset didnt help Win 7 pro, 64bit Rgds, :Jari / oh2fqv On Wed, Oct 17, 2018 at 6:56 PM Black Michael via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Was on automatic first download. Guess you've seen others having the > problem consistently. > I just had it the once. > > > > > On Wednesday, October 17, 2018, 10:35:29 AM CDT, WB5JJJ > wrote: > > > I manually went to the LoTW page and the file is 10 days old. > > On Wed, Oct 17, 2018 at 10:25 AM Bill Somerville > wrote: > > On 17/10/2018 16:05, Black Michael via wsjt-devel wrote: > > FYI...got an error about "too may redirects" on the lotw download on > > first run. Still ran after that so definitely not fatal. > > > > A 2nd startup didn't produce the error. Deleted the lotw file and ran > > again and did not get the error and the download was succesful. > > So perhaps just a transient error. > > > > de Mike W9MDB > > > > > Hi Mike, > > thanks for the report. I am surprised that there are any redirects on > that URL so I suspect there is a defect lurking. Maybe server busy > return codes are being misinterpreted as redirect return codes. Let's > see if others get the same issue. > > Was it on the automatic first download of the file or did it happen when > you have used the settings button to force a fresh download? > > 73 > Bill > G4WJS. > > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > > > -- > George Cotton, WB5JJJ > PO Box 1025 > Russellville, AR 72811 > > 479.968.7737 Home > 479.857.7737 Cell > > DMR K5CS (Local Repeater) - 310515, CC1, TS2 > DMR Arkansas - 3105 > > 4 > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Was on automatic first download. Guess you've seen others having the problem consistently.I just had it the once. On Wednesday, October 17, 2018, 10:35:29 AM CDT, WB5JJJ wrote: I manually went to the LoTW page and the file is 10 days old. On Wed, Oct 17, 2018 at 10:25 AM Bill Somerville wrote: On 17/10/2018 16:05, Black Michael via wsjt-devel wrote: > FYI...got an error about "too may redirects" on the lotw download on > first run. Still ran after that so definitely not fatal. > > A 2nd startup didn't produce the error. Deleted the lotw file and ran > again and did not get the error and the download was succesful. > So perhaps just a transient error. > > de Mike W9MDB > > Hi Mike, thanks for the report. I am surprised that there are any redirects on that URL so I suspect there is a defect lurking. Maybe server busy return codes are being misinterpreted as redirect return codes. Let's see if others get the same issue. Was it on the automatic first download of the file or did it happen when you have used the settings button to force a fresh download? 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- George Cotton, WB5JJJ PO Box 1025 Russellville, AR 72811 479.968.7737 Home 479.857.7737 Cell DMR K5CS (Local Repeater) - 310515, CC1, TS2DMR Arkansas - 3105 4___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Hi John - It looks like I forgot to comment out a debug print to fort.81. On the Mac, you can get around this by running from within the application bundle. For example, my install directory is ~/Builds/wsjtx/install, so I would do this to run wsjtx: cd ~/Builds/wsjtx/install/wsjtx.app/Contents/MacOS ./wsjtx Steve > On Oct 17, 2018, at 10:31 AM, John wrote: > > Hi Bill, > > Problem on my MacBook. > > Running: /Users/jmn/Desktop/wsjtx.app/Contents/MacOS/jt9 -s WSJT-X -w 1 -m 3 > -e /Users/jmn/Desktop/wsjtx.app/Contents/MacOS -a > "/Users/jmn/Library/Application Support/WSJT-X" -t > /var/folders/vv/5c1b7szs1bgbr65gkt6y0gnhgn/T/WSJT-X > At line 145 of file /Users/bill/wsjtx-prefix/src/lib/ft8_decode.f90 (unit = > 81) > Fortran runtime error: Cannot open file 'fort.81': Permission denied > > > This is repeatable when I use FT8 mode. It appears near the end of the > first decode sequence.In the temporary file: WSJT-X I find decoded.txt > has been created but is empty. Permissions are OK. > > — John G4KLA > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Hi Joe In your list of changes below Auto Log is noted as available for contests. In the Quick Start Guide this limitation is not noted, as far as I can see. Just completed a few 77 bit QSOs with rc3 where I have selected Auto Log and the manual prompt still appears. Personal preference would be to have Auto Log available generally, with perhaps a brief notification that QSO had been logged. Charlie > A third candidate release ("RC3") of WSJT-X 2.0 is now available for > download and use by beta testers. > > Changes in RC3 relative to RC2 include the following: > > 1 Improved SNR calculation for FT8 > 2 Test grid4 (not grid6) for matches in ADIF log > 3 Auto-generate 77-bit messages for callsigns with /R or /P > 4 Fix auto-sequencing for "CQ ABC ...", "CQ ABCD ...", etc. > 5 Fix the "CQ RU RU ..." bug > 6 Implement AP decoding for contest messages and for Hound > 7 Check Field Day and RTTY Roundup exchanges for validity > 8 Implement "Select next caller" and use of the "TU; ..." messages > 9 Option to "Auto Log" in contests > 10 Real-time display of contest log > 11 Contest exchanges sent to the ADIF log and N1MM+ > 12 Function to export a Cabrillo log, ready for submission > 13 Convert DXpedition mode to always use 77-bit messages > 14 Fix bug associated with opening file "houndcallers.txt" > 15 Remove end-of-line numbers from MSK144 decodes > 16 Finish MSK144 encoding/decoding for Sh msgs and nonstandard calls > 17 Halt Tx before resetting power after Tune > 18 Auto update of LoTW info, and faster program startup > > The "Quick-Start Guide to WSJT-X 2.0" has been updated and extended. If > you plan to use the beta-test release candidate RC3, be sure to read > this entire guide first: > http://physics.princeton.edu/pulsar/k1jt/Quick_Start_WSJT-X_2.0.pdf > > Changes in RC3 relative to RC2 are described in a new section starting > on page 7. > > Download links for RC3 on Windows, Linux, and macOS can be found on the > WSJT-X web site > http://physics.princeton.edu/pulsar/k1jt/wsjtx.html > > A one-hour "FT8 mock contest" will be held next week: Thursday, October > 25, 0200-0300 UTC (that's Wednesday evening, NA time). Watch for a > separate announcement with more details. > > We look forward to your feedback on WSJT-X 2.0-rc3. Please help us by > testing all new features, including especially the contest-oriented > messages and the new MSK144 protocol. Reports should be sent to the > wsjt-devel email list, wsjt-devel@lists.sourceforge.net. You must > subscribe to the list in order to post there. > > -- 73, Joe, K1JT (for the WSJT Development Group) > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
I have the seam problem as well. 73's ON4CKT Rudy Van: "WB5JJJ" Aan: "Black Michael" , "wsjt-devel" Verzonden: Woensdag 17 oktober 2018 17:18:21 Onderwerp: Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3 Get this error on each start up of RC3 as well. On Wed, Oct 17, 2018 at 10:11 AM Black Michael via wsjt-devel < [ mailto:wsjt-devel@lists.sourceforge.net | wsjt-devel@lists.sourceforge.net ] > wrote: FYI...got an error about "too may redirects" on the lotw download on first run. Still ran after that so definitely not fatal. A 2nd startup didn't produce the error. Deleted the lotw file and ran again and did not get the error and the download was succesful. So perhaps just a transient error. de Mike W9MDB On Wednesday, October 17, 2018, 9:12:55 AM CDT, Joe Taylor < [ mailto:j...@princeton.edu | j...@princeton.edu ] > wrote: A third candidate release ("RC3") of WSJT-X 2.0 is now available for download and use by beta testers. Changes in RC3 relative to RC2 include the following: 1 Improved SNR calculation for FT8 2 Test grid4 (not grid6) for matches in ADIF log 3 Auto-generate 77-bit messages for callsigns with /R or /P 4 Fix auto-sequencing for "CQ ABC ...", "CQ ABCD ...", etc. 5 Fix the "CQ RU RU ..." bug 6 Implement AP decoding for contest messages and for Hound 7 Check Field Day and RTTY Roundup exchanges for validity 8 Implement "Select next caller" and use of the "TU; ..." messages 9 Option to "Auto Log" in contests 10 Real-time display of contest log 11 Contest exchanges sent to the ADIF log and N1MM+ 12 Function to export a Cabrillo log, ready for submission 13 Convert DXpedition mode to always use 77-bit messages 14 Fix bug associated with opening file "houndcallers.txt" 15 Remove end-of-line numbers from MSK144 decodes 16 Finish MSK144 encoding/decoding for Sh msgs and nonstandard calls 17 Halt Tx before resetting power after Tune 18 Auto update of LoTW info, and faster program startup The "Quick-Start Guide to WSJT-X 2.0" has been updated and extended. If you plan to use the beta-test release candidate RC3, be sure to read this entire guide first: [ http://physics.princeton.edu/pulsar/k1jt/Quick_Start_WSJT-X_2.0.pdf | http://physics.princeton.edu/pulsar/k1jt/Quick_Start_WSJT-X_2.0.pdf ] Changes in RC3 relative to RC2 are described in a new section starting on page 7. Download links for RC3 on Windows, Linux, and macOS can be found on the WSJT-X web site [ http://physics.princeton.edu/pulsar/k1jt/wsjtx.html | http://physics.princeton.edu/pulsar/k1jt/wsjtx.html ] A one-hour "FT8 mock contest" will be held next week: Thursday, October 25, 0200-0300 UTC (that's Wednesday evening, NA time). Watch for a separate announcement with more details. We look forward to your feedback on WSJT-X 2.0-rc3. Please help us by testing all new features, including especially the contest-oriented messages and the new MSK144 protocol. Reports should be sent to the wsjt-devel email list, [ mailto:wsjt-devel@lists.sourceforge.net. | wsjt-devel@lists.sourceforge.net. ] You must subscribe to the list in order to post there. -- 73, Joe, K1JT (for the WSJT Development Group) ___ wsjt-devel mailing list [ mailto:wsjt-devel@lists.sourceforge.net | wsjt-devel@lists.sourceforge.net ] [ https://lists.sourceforge.net/lists/listinfo/wsjt-devel | https://lists.sourceforge.net/lists/listinfo/wsjt-devel ] ___ wsjt-devel mailing list [ mailto:wsjt-devel@lists.sourceforge.net | wsjt-devel@lists.sourceforge.net ] [ https://lists.sourceforge.net/lists/listinfo/wsjt-devel | https://lists.sourceforge.net/lists/listinfo/wsjt-devel ] -- George Cotton, WB5JJJ PO Box 1025 Russellville, AR 72811 479.968.7737 Home 479.857.7737 Cell DMR K5CS (Local Repeater) - 310515, CC1, TS2 DMR Arkansas - 3105 4 ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Hello, Same startup dialog popup problem here as well. Reboot didnt help, happens every time I start RC3 Rgds, :Jari / oh2fqv On Wed, Oct 17, 2018 at 6:25 PM Bill Somerville wrote: > On 17/10/2018 16:05, Black Michael via wsjt-devel wrote: > > FYI...got an error about "too may redirects" on the lotw download on > > first run. Still ran after that so definitely not fatal. > > > > A 2nd startup didn't produce the error. Deleted the lotw file and ran > > again and did not get the error and the download was succesful. > > So perhaps just a transient error. > > > > de Mike W9MDB > > > > > Hi Mike, > > thanks for the report. I am surprised that there are any redirects on > that URL so I suspect there is a defect lurking. Maybe server busy > return codes are being misinterpreted as redirect return codes. Let's > see if others get the same issue. > > Was it on the automatic first download of the file or did it happen when > you have used the settings button to force a fresh download? > > 73 > Bill > G4WJS. > > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
I manually went to the LoTW page and the file is 10 days old. On Wed, Oct 17, 2018 at 10:25 AM Bill Somerville wrote: > On 17/10/2018 16:05, Black Michael via wsjt-devel wrote: > > FYI...got an error about "too may redirects" on the lotw download on > > first run. Still ran after that so definitely not fatal. > > > > A 2nd startup didn't produce the error. Deleted the lotw file and ran > > again and did not get the error and the download was succesful. > > So perhaps just a transient error. > > > > de Mike W9MDB > > > > > Hi Mike, > > thanks for the report. I am surprised that there are any redirects on > that URL so I suspect there is a defect lurking. Maybe server busy > return codes are being misinterpreted as redirect return codes. Let's > see if others get the same issue. > > Was it on the automatic first download of the file or did it happen when > you have used the settings button to force a fresh download? > > 73 > Bill > G4WJS. > > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- George Cotton, WB5JJJ PO Box 1025 Russellville, AR 72811 479.968.7737 Home 479.857.7737 Cell DMR K5CS (Local Repeater) - 310515, CC1, TS2 DMR Arkansas - 3105 4 ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Hi Bill, Problem on my MacBook. Running: /Users/jmn/Desktop/wsjtx.app/Contents/MacOS/jt9 -s WSJT-X -w 1 -m 3 -e /Users/jmn/Desktop/wsjtx.app/Contents/MacOS -a "/Users/jmn/Library/Application Support/WSJT-X" -t /var/folders/vv/5c1b7szs1bgbr65gkt6y0gnhgn/T/WSJT-X At line 145 of file /Users/bill/wsjtx-prefix/src/lib/ft8_decode.f90 (unit = 81) Fortran runtime error: Cannot open file 'fort.81': Permission denied This is repeatable when I use FT8 mode. It appears near the end of the first decode sequence.In the temporary file: WSJT-X I find decoded.txt has been created but is empty. Permissions are OK. — John G4KLA smime.p7s Description: S/MIME cryptographic signature ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
On 17/10/2018 16:05, Black Michael via wsjt-devel wrote: FYI...got an error about "too may redirects" on the lotw download on first run. Still ran after that so definitely not fatal. A 2nd startup didn't produce the error. Deleted the lotw file and ran again and did not get the error and the download was succesful. So perhaps just a transient error. de Mike W9MDB Hi Mike, thanks for the report. I am surprised that there are any redirects on that URL so I suspect there is a defect lurking. Maybe server busy return codes are being misinterpreted as redirect return codes. Let's see if others get the same issue. Was it on the automatic first download of the file or did it happen when you have used the settings button to force a fresh download? 73 Bill G4WJS. ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Try a reboot and see if that fixes it...could be a cache problem. de Mike W9MDB On Wednesday, October 17, 2018, 10:18:59 AM CDT, WB5JJJ wrote: Get this error on each start up of RC3 as well. On Wed, Oct 17, 2018 at 10:11 AM Black Michael via wsjt-devel wrote: FYI...got an error about "too may redirects" on the lotw download on first run. Still ran after that so definitely not fatal. A 2nd startup didn't produce the error. Deleted the lotw file and ran again and did not get the error and the download was succesful. So perhaps just a transient error. de Mike W9MDB On Wednesday, October 17, 2018, 9:12:55 AM CDT, Joe Taylor wrote: A third candidate release ("RC3") of WSJT-X 2.0 is now available for download and use by beta testers. Changes in RC3 relative to RC2 include the following: 1 Improved SNR calculation for FT8 2 Test grid4 (not grid6) for matches in ADIF log 3 Auto-generate 77-bit messages for callsigns with /R or /P 4 Fix auto-sequencing for "CQ ABC ...", "CQ ABCD ...", etc. 5 Fix the "CQ RU RU ..." bug 6 Implement AP decoding for contest messages and for Hound 7 Check Field Day and RTTY Roundup exchanges for validity 8 Implement "Select next caller" and use of the "TU; ..." messages 9 Option to "Auto Log" in contests 10 Real-time display of contest log 11 Contest exchanges sent to the ADIF log and N1MM+ 12 Function to export a Cabrillo log, ready for submission 13 Convert DXpedition mode to always use 77-bit messages 14 Fix bug associated with opening file "houndcallers.txt" 15 Remove end-of-line numbers from MSK144 decodes 16 Finish MSK144 encoding/decoding for Sh msgs and nonstandard calls 17 Halt Tx before resetting power after Tune 18 Auto update of LoTW info, and faster program startup The "Quick-Start Guide to WSJT-X 2.0" has been updated and extended. If you plan to use the beta-test release candidate RC3, be sure to read this entire guide first: http://physics.princeton.edu/pulsar/k1jt/Quick_Start_WSJT-X_2.0.pdf Changes in RC3 relative to RC2 are described in a new section starting on page 7. Download links for RC3 on Windows, Linux, and macOS can be found on the WSJT-X web site http://physics.princeton.edu/pulsar/k1jt/wsjtx.html A one-hour "FT8 mock contest" will be held next week: Thursday, October 25, 0200-0300 UTC (that's Wednesday evening, NA time). Watch for a separate announcement with more details. We look forward to your feedback on WSJT-X 2.0-rc3. Please help us by testing all new features, including especially the contest-oriented messages and the new MSK144 protocol. Reports should be sent to the wsjt-devel email list, wsjt-devel@lists.sourceforge.net. You must subscribe to the list in order to post there. -- 73, Joe, K1JT (for the WSJT Development Group) ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel -- George Cotton, WB5JJJ PO Box 1025 Russellville, AR 72811 479.968.7737 Home 479.857.7737 Cell DMR K5CS (Local Repeater) - 310515, CC1, TS2DMR Arkansas - 3105 4 ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
Get this error on each start up of RC3 as well. On Wed, Oct 17, 2018 at 10:11 AM Black Michael via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > FYI...got an error about "too may redirects" on the lotw download on first > run. Still ran after that so definitely not fatal. > > A 2nd startup didn't produce the error. Deleted the lotw file and ran > again and did not get the error and the download was succesful. > So perhaps just a transient error. > > de Mike W9MDB > > > > > > > On Wednesday, October 17, 2018, 9:12:55 AM CDT, Joe Taylor < > j...@princeton.edu> wrote: > > > A third candidate release ("RC3") of WSJT-X 2.0 is now available for > download and use by beta testers. > > Changes in RC3 relative to RC2 include the following: > > 1 Improved SNR calculation for FT8 > 2 Test grid4 (not grid6) for matches in ADIF log > 3 Auto-generate 77-bit messages for callsigns with /R or /P > 4 Fix auto-sequencing for "CQ ABC ...", "CQ ABCD ...", etc. > 5 Fix the "CQ RU RU ..." bug > 6 Implement AP decoding for contest messages and for Hound > 7 Check Field Day and RTTY Roundup exchanges for validity > 8 Implement "Select next caller" and use of the "TU; ..." messages > 9 Option to "Auto Log" in contests > 10 Real-time display of contest log > 11 Contest exchanges sent to the ADIF log and N1MM+ > 12 Function to export a Cabrillo log, ready for submission > 13 Convert DXpedition mode to always use 77-bit messages > 14 Fix bug associated with opening file "houndcallers.txt" > 15 Remove end-of-line numbers from MSK144 decodes > 16 Finish MSK144 encoding/decoding for Sh msgs and nonstandard calls > 17 Halt Tx before resetting power after Tune > 18 Auto update of LoTW info, and faster program startup > > The "Quick-Start Guide to WSJT-X 2.0" has been updated and extended. If > you plan to use the beta-test release candidate RC3, be sure to read > this entire guide first: > http://physics.princeton.edu/pulsar/k1jt/Quick_Start_WSJT-X_2.0.pdf > > Changes in RC3 relative to RC2 are described in a new section starting > on page 7. > > Download links for RC3 on Windows, Linux, and macOS can be found on the > WSJT-X web site > http://physics.princeton.edu/pulsar/k1jt/wsjtx.html > > A one-hour "FT8 mock contest" will be held next week: Thursday, October > 25, 0200-0300 UTC (that's Wednesday evening, NA time). Watch for a > separate announcement with more details. > > We look forward to your feedback on WSJT-X 2.0-rc3. Please help us by > testing all new features, including especially the contest-oriented > messages and the new MSK144 protocol. Reports should be sent to the > wsjt-devel email list, wsjt-devel@lists.sourceforge.net. You must > subscribe to the list in order to post there. > > -- 73, Joe, K1JT (for the WSJT Development Group) > > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > -- George Cotton, WB5JJJ PO Box 1025 Russellville, AR 72811 479.968.7737 Home 479.857.7737 Cell DMR K5CS (Local Repeater) - 310515, CC1, TS2 DMR Arkansas - 3105 4 ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
FYI...got an error about "too may redirects" on the lotw download on first run. Still ran after that so definitely not fatal. A 2nd startup didn't produce the error. Deleted the lotw file and ran again and did not get the error and the download was succesful. So perhaps just a transient error. de Mike W9MDB On Wednesday, October 17, 2018, 9:12:55 AM CDT, Joe Taylor wrote: A third candidate release ("RC3") of WSJT-X 2.0 is now available for download and use by beta testers. Changes in RC3 relative to RC2 include the following: 1 Improved SNR calculation for FT8 2 Test grid4 (not grid6) for matches in ADIF log 3 Auto-generate 77-bit messages for callsigns with /R or /P 4 Fix auto-sequencing for "CQ ABC ...", "CQ ABCD ...", etc. 5 Fix the "CQ RU RU ..." bug 6 Implement AP decoding for contest messages and for Hound 7 Check Field Day and RTTY Roundup exchanges for validity 8 Implement "Select next caller" and use of the "TU; ..." messages 9 Option to "Auto Log" in contests 10 Real-time display of contest log 11 Contest exchanges sent to the ADIF log and N1MM+ 12 Function to export a Cabrillo log, ready for submission 13 Convert DXpedition mode to always use 77-bit messages 14 Fix bug associated with opening file "houndcallers.txt" 15 Remove end-of-line numbers from MSK144 decodes 16 Finish MSK144 encoding/decoding for Sh msgs and nonstandard calls 17 Halt Tx before resetting power after Tune 18 Auto update of LoTW info, and faster program startup The "Quick-Start Guide to WSJT-X 2.0" has been updated and extended. If you plan to use the beta-test release candidate RC3, be sure to read this entire guide first: http://physics.princeton.edu/pulsar/k1jt/Quick_Start_WSJT-X_2.0.pdf Changes in RC3 relative to RC2 are described in a new section starting on page 7. Download links for RC3 on Windows, Linux, and macOS can be found on the WSJT-X web site http://physics.princeton.edu/pulsar/k1jt/wsjtx.html A one-hour "FT8 mock contest" will be held next week: Thursday, October 25, 0200-0300 UTC (that's Wednesday evening, NA time). Watch for a separate announcement with more details. We look forward to your feedback on WSJT-X 2.0-rc3. Please help us by testing all new features, including especially the contest-oriented messages and the new MSK144 protocol. Reports should be sent to the wsjt-devel email list, wsjt-devel@lists.sourceforge.net. You must subscribe to the list in order to post there. -- 73, Joe, K1JT (for the WSJT Development Group) ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] Candidate release WSJT-X 2.0.0-rc3
A third candidate release ("RC3") of WSJT-X 2.0 is now available for download and use by beta testers. Changes in RC3 relative to RC2 include the following: 1 Improved SNR calculation for FT8 2 Test grid4 (not grid6) for matches in ADIF log 3 Auto-generate 77-bit messages for callsigns with /R or /P 4 Fix auto-sequencing for "CQ ABC ...", "CQ ABCD ...", etc. 5 Fix the "CQ RU RU ..." bug 6 Implement AP decoding for contest messages and for Hound 7 Check Field Day and RTTY Roundup exchanges for validity 8 Implement "Select next caller" and use of the "TU; ..." messages 9 Option to "Auto Log" in contests 10 Real-time display of contest log 11 Contest exchanges sent to the ADIF log and N1MM+ 12 Function to export a Cabrillo log, ready for submission 13 Convert DXpedition mode to always use 77-bit messages 14 Fix bug associated with opening file "houndcallers.txt" 15 Remove end-of-line numbers from MSK144 decodes 16 Finish MSK144 encoding/decoding for Sh msgs and nonstandard calls 17 Halt Tx before resetting power after Tune 18 Auto update of LoTW info, and faster program startup The "Quick-Start Guide to WSJT-X 2.0" has been updated and extended. If you plan to use the beta-test release candidate RC3, be sure to read this entire guide first: http://physics.princeton.edu/pulsar/k1jt/Quick_Start_WSJT-X_2.0.pdf Changes in RC3 relative to RC2 are described in a new section starting on page 7. Download links for RC3 on Windows, Linux, and macOS can be found on the WSJT-X web site http://physics.princeton.edu/pulsar/k1jt/wsjtx.html A one-hour "FT8 mock contest" will be held next week: Thursday, October 25, 0200-0300 UTC (that's Wednesday evening, NA time). Watch for a separate announcement with more details. We look forward to your feedback on WSJT-X 2.0-rc3. Please help us by testing all new features, including especially the contest-oriented messages and the new MSK144 protocol. Reports should be sent to the wsjt-devel email list, wsjt-devel@lists.sourceforge.net. You must subscribe to the list in order to post there. -- 73, Joe, K1JT (for the WSJT Development Group) ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel