Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
We have the same transceiver Mike, ANAN100D. Please try it. because I am puzzled. 73, Ton PA0TBR On Sun, 18 Apr 2021 at 00:21, Black Michael wrote: > You never did say what rig you have. > > I've got an ANAN100D and 7000DLE MKII maybe I can reproduce this problem > and see if there's a fix. > I'm using Thetis 2.8.11 but can compiler it too. > > Mike W9MDB > > > > > On Saturday, April 17, 2021, 05:09:16 PM CDT, Ton PA0TBR > wrote: > > > Hi Mike, > > I monitored the CAT messages, all messages behave as expected, when I > transmit using instance 1, VFO 2 (on port 2) is not given a new frequency > (FA) command and replies to the FA queries continue to give the same > frequency for VFO2, while WSJT-X instance 2 shows a different frequency. > The checks were done with the TS2000 selection for CAT. > > Questions: > 1) Do you agree that it is easier to set the Thetis Transmit & Receive > Filters to something like 0 - 5000 Hz and set WSJT-X Split operation to > None? > 2) Can you see the problem on your system? > 3) I assume that the UDP settings I described in my initial message are > correct? Could it be UDP between the 2 WSJT-X instances? > > 73, > Ton PA0TBR > > > On Thu, 15 Apr 2021 at 23:07, Ton PA0TBR wrote: > > Hi Mike, nice to hear from you! > > I will check the CAT communication, you might have a point there. > > Maybe it's easier to set the Thetis Transmit & Receive Filters to > something like 0 - 5000 Hz and WSJT-X Split operation to None? > > The answers to your questions > 1) I use the 2 instances to monitor different bands, different frequency > segments in one band, different modes etc. > > 2) Rig selection is TS2000, I am using this setup for many years and > obvious overlooked the new rig selections. > I didn't expect CAT control to play a role in this because only the > instance of WSJT-X is playing tricks and manual band / frequency changes > initiated on either instance or VFO work as expected. > I changed to PowerSDR/Thetis, but see no difference. > What changes were made in the PowerSDR/Thetis selection? Did you implement > something like I did in Thetis, as below? > > 3) CAT control has been working fine for me. It includes a small mod where > the Thetis CAT port defines the instance and which VFO (A or B) to use. (I > use this since 2014, initially on PowerSDR). > > > To avoid any confusion, Hound mode is not necessary to see what I > described. > > 73, > Ton PA0TBR > > > > On Thu, 15 Apr 2021 at 14:40, Black Michael via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > > Couple of thoughts > > #1 Why are two instances being run? What's the use case? > #2 What rig selection are you using? Should be either Flex or PowerSDR. > #3 You might have more success running FLRig and connecting both WSJT-X > instances to the one FLRig...that way you end up with just 1 program > actually controlling the rig. Theres a PowerSDR rig selection in FLRig > that I contributed. > > Mike W9MDB > > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
You never did say what rig you have. I've got an ANAN100D and 7000DLE MKII maybe I can reproduce this problem and see if there's a fix.I'm using Thetis 2.8.11 but can compiler it too. Mike W9MDB On Saturday, April 17, 2021, 05:09:16 PM CDT, Ton PA0TBR wrote: Hi Mike, I monitored the CAT messages, all messages behave as expected, when I transmit using instance 1, VFO 2 (on port 2) is not given a new frequency (FA) command and replies to the FA queries continue to give the same frequency for VFO2, while WSJT-X instance 2 shows a different frequency.The checks were done with the TS2000 selection for CAT. Questions:1) Do you agree that it is easier to set the Thetis Transmit & Receive Filters to something like 0 - 5000 Hz and set WSJT-X Split operation to None?2) Can you see the problem on your system? 3) I assume that the UDP settings I described in my initial message are correct? Could it be UDP between the 2 WSJT-X instances? 73,Ton PA0TBR On Thu, 15 Apr 2021 at 23:07, Ton PA0TBR wrote: Hi Mike, nice to hear from you! I will check the CAT communication, you might have a point there. Maybe it's easier to set the Thetis Transmit & Receive Filters to something like 0 - 5000 Hz and WSJT-X Split operation to None? The answers to your questions1) I use the 2 instances to monitor different bands, different frequency segments in one band, different modes etc. 2) Rig selection is TS2000, I am using this setup for many years and obvious overlooked the new rig selections. I didn't expect CAT control to play a role in this because only the instance of WSJT-X is playing tricks and manual band / frequency changes initiated on either instance or VFO work as expected.I changed to PowerSDR/Thetis, but see no difference. What changes were made in the PowerSDR/Thetis selection? Did you implement something like I did in Thetis, as below? 3) CAT control has been working fine for me. It includes a small mod where the Thetis CAT port defines the instance and which VFO (A or B) to use. (I use this since 2014, initially on PowerSDR). To avoid any confusion, Hound mode is not necessary to see what I described. 73, Ton PA0TBR On Thu, 15 Apr 2021 at 14:40, Black Michael via wsjt-devel wrote: Couple of thoughts #1 Why are two instances being run? What's the use case?#2 What rig selection are you using? Should be either Flex or PowerSDR. #3 You might have more success running FLRig and connecting both WSJT-X instances to the one FLRig...that way you end up with just 1 program actually controlling the rig. Theres a PowerSDR rig selection in FLRig that I contributed. Mike W9MDB ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
Hi Mike, I monitored the CAT messages, all messages behave as expected, when I transmit using instance 1, VFO 2 (on port 2) is not given a new frequency (FA) command and replies to the FA queries continue to give the same frequency for VFO2, while WSJT-X instance 2 shows a different frequency. The checks were done with the TS2000 selection for CAT. Questions: 1) Do you agree that it is easier to set the Thetis Transmit & Receive Filters to something like 0 - 5000 Hz and set WSJT-X Split operation to None? 2) Can you see the problem on your system? 3) I assume that the UDP settings I described in my initial message are correct? Could it be UDP between the 2 WSJT-X instances? 73, Ton PA0TBR On Thu, 15 Apr 2021 at 23:07, Ton PA0TBR wrote: > Hi Mike, nice to hear from you! > > I will check the CAT communication, you might have a point there. > > Maybe it's easier to set the Thetis Transmit & Receive Filters to > something like 0 - 5000 Hz and WSJT-X Split operation to None? > > The answers to your questions > 1) I use the 2 instances to monitor different bands, different frequency > segments in one band, different modes etc. > > 2) Rig selection is TS2000, I am using this setup for many years and > obvious overlooked the new rig selections. > I didn't expect CAT control to play a role in this because only the > instance of WSJT-X is playing tricks and manual band / frequency changes > initiated on either instance or VFO work as expected. > I changed to PowerSDR/Thetis, but see no difference. > What changes were made in the PowerSDR/Thetis selection? Did you implement > something like I did in Thetis, as below? > > 3) CAT control has been working fine for me. It includes a small mod where > the Thetis CAT port defines the instance and which VFO (A or B) to use. (I > use this since 2014, initially on PowerSDR). > > > To avoid any confusion, Hound mode is not necessary to see what I > described. > > 73, > Ton PA0TBR > > > > On Thu, 15 Apr 2021 at 14:40, Black Michael via wsjt-devel < > wsjt-devel@lists.sourceforge.net> wrote: > >> Couple of thoughts >> >> #1 Why are two instances being run? What's the use case? >> #2 What rig selection are you using? Should be either Flex or PowerSDR. >> #3 You might have more success running FLRig and connecting both WSJT-X >> instances to the one FLRig...that way you end up with just 1 program >> actually controlling the rig. Theres a PowerSDR rig selection in FLRig >> that I contributed. >> >> Mike W9MDB >> >> ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
Hi Mike, nice to hear from you! I will check the CAT communication, you might have a point there. Maybe it's easier to set the Thetis Transmit & Receive Filters to something like 0 - 5000 Hz and WSJT-X Split operation to None? The answers to your questions 1) I use the 2 instances to monitor different bands, different frequency segments in one band, different modes etc. 2) Rig selection is TS2000, I am using this setup for many years and obvious overlooked the new rig selections. I didn't expect CAT control to play a role in this because only the instance of WSJT-X is playing tricks and manual band / frequency changes initiated on either instance or VFO work as expected. I changed to PowerSDR/Thetis, but see no difference. What changes were made in the PowerSDR/Thetis selection? Did you implement something like I did in Thetis, as below? 3) CAT control has been working fine for me. It includes a small mod where the Thetis CAT port defines the instance and which VFO (A or B) to use. (I use this since 2014, initially on PowerSDR). To avoid any confusion, Hound mode is not necessary to see what I described. 73, Ton PA0TBR On Thu, 15 Apr 2021 at 14:40, Black Michael via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Couple of thoughts > > #1 Why are two instances being run? What's the use case? > #2 What rig selection are you using? Should be either Flex or PowerSDR. > #3 You might have more success running FLRig and connecting both WSJT-X > instances to the one FLRig...that way you end up with just 1 program > actually controlling the rig. Theres a PowerSDR rig selection in FLRig > that I contributed. > > Mike W9MDB > > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
What's that got to do with the problem we're talking about? There have been some changes that should show up in the next release of WSJT-X which should fix problems with the frequency walking. This thread is talking about running two instances of WSJT-X. Mike W9MDB On Thursday, April 15, 2021, 07:59:04 AM CDT, Andras Bato wrote: Hi Mike W9MDB,Losing the reception of the Fox occurs to several types of radios mainly when Hound has to keep repeating -say- R-24.Then, WSJT-X starts changing Hund's frequency down step by step. 73,Andy On Thu, Apr 15, 2021 at 2:42 PM Black Michael via wsjt-devel wrote: Couple of thoughts #1 Why are two instances being run? What's the use case?#2 What rig selection are you using? Should be either Flex or PowerSDR. #3 You might have more success running FLRig and connecting both WSJT-X instances to the one FLRig...that way you end up with just 1 program actually controlling the rig. Theres a PowerSDR rig selection in FLRig that I contributed. Mike W9MDB On Thursday, April 15, 2021, 07:00:06 AM CDT, Andras Bato wrote: Hi Mike,What can I do with my FT450D radio to avoiding losing the reception of the Fox?73,Andy On Thu, Apr 15, 2021 at 1:11 PM Mike Cizek W0VTT wrote: Hello Ton, I had similar problems with 2.4.0 changing freq. Speeding up the polling rate on LP Bridge seems to have cured it. Maybe you can change settings for the virtual ports with your Anan? 73, Mike Cizek W0VTT From: Ton PA0TBR Sent: Thursday, 15 April, 2021 01:55 To: WSJT software development Subject: Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation I am sorry to hear that Andy. Thanks for confirming that it's not just me seeing this. 73, Ton PA0TBR On Wed, 14 Apr 2021 at 23:41, Andras Bato wrote: I've lost a fine DX QSO with the C92RU expedition station thanks to the same QSY phenomena! 73, Andy HA6NN On Wed, Apr 14, 2021 at 8:04 PM Ton PA0TBR wrote: Can someone help me with the following observation? Is this a problem with my settings, is it a bug or is there some other reason? I have 2 instances '1' and '2' which are connected to an ANAN transceiver with CAT over separate virtual COM ports. The system works very well when split operation is set to 'None'. When split operation is set to 'Fake it' then during transmission on instance 1 BOTH instances change their dial frequency according to their respective Audio TX Frequency settings. I had not expected instance 2 to change frequency. The radio VFO 2 does not change. This applies when the last band switch was done using the instance 2 band control. When I do a band switch using the radio (VFO 2), say from 20m to 17m, WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 becomes even more confusing. During transmission on instance 1, the dial frequency for instance 1 changes as before but instance 2 changes back to 20m, again with the corresponding offset. My station: 2 * WSJT-X v2.4.0-rc4 Windows 8.1 Unique identifiers have been assigned to the 2 instances. UDP settings are the same for the 2 instances. UDP server: 239.255.0.0 UDP Server port number: 2237 Outgoing interfaces: loobback_0 Multicast TTL: 1 All 3 UDP checkboxes are checked. 73, Ton PA0TBR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
Hi Mike W9MDB, Losing the reception of the Fox occurs to several types of radios mainly when Hound has to keep repeating -say- R-24. Then, WSJT-X starts changing Hund's frequency down step by step. 73, Andy On Thu, Apr 15, 2021 at 2:42 PM Black Michael via wsjt-devel < wsjt-devel@lists.sourceforge.net> wrote: > Couple of thoughts > > #1 Why are two instances being run? What's the use case? > #2 What rig selection are you using? Should be either Flex or PowerSDR. > #3 You might have more success running FLRig and connecting both WSJT-X > instances to the one FLRig...that way you end up with just 1 program > actually controlling the rig. Theres a PowerSDR rig selection in FLRig > that I contributed. > > Mike W9MDB > > > > > On Thursday, April 15, 2021, 07:00:06 AM CDT, Andras Bato < > ha6nn.a...@gmail.com> wrote: > > > Hi Mike, > What can I do with my FT450D radio to avoiding losing the reception of the > Fox? > 73, > Andy > > On Thu, Apr 15, 2021 at 1:11 PM Mike Cizek W0VTT > wrote: > > Hello Ton, > > > > I had similar problems with 2.4.0 changing freq. Speeding up the polling > rate on LP Bridge seems to have cured it. Maybe you can change settings > for the virtual ports with your Anan? > > > > > > 73, > > Mike Cizek W0VTT > > > > *From:* Ton PA0TBR > *Sent:* Thursday, 15 April, 2021 01:55 > *To:* WSJT software development > *Subject:* Re: [wsjt-devel] Strange interaction between 2 instances when > using 'Fake it' split operation > > > > I am sorry to hear that Andy. > > Thanks for confirming that it's not just me seeing this. > > 73, > > Ton PA0TBR > > > > > > On Wed, 14 Apr 2021 at 23:41, Andras Bato wrote: > > I've lost a fine DX QSO with the C92RU expedition station thanks to the > same QSY phenomena! > > 73, > > Andy HA6NN > > > > On Wed, Apr 14, 2021 at 8:04 PM Ton PA0TBR wrote: > > Can someone help me with the following observation? Is this a problem with > my settings, is it a bug or is there some other reason? > > > > I have 2 instances '1' and '2' which are connected to an ANAN transceiver > with CAT over separate virtual COM ports. The system works very well when > split operation is set to 'None'. > > When split operation is set to 'Fake it' then during transmission on > instance 1 BOTH instances change their dial frequency according to their > respective Audio TX Frequency settings. > I had not expected instance 2 to change frequency. > The radio VFO 2 does not change. > This applies when the last band switch was done using the instance 2 band > control. > > When I do a band switch using the radio (VFO 2), say from 20m to 17m, > WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 > becomes even more confusing. > During transmission on instance 1, the dial frequency for instance 1 > changes as before but instance 2 changes back to 20m, again with the > corresponding offset. > > My station: > 2 * WSJT-X v2.4.0-rc4 > Windows 8.1 > > Unique identifiers have been assigned to the 2 instances. > > UDP settings are the same for the 2 instances. > UDP server: 239.255.0.0 > UDP Server port number: 2237 > Outgoing interfaces: loobback_0 > Multicast TTL: 1 > All 3 UDP checkboxes are checked. > > > > 73, > > Ton PA0TBR > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
Couple of thoughts #1 Why are two instances being run? What's the use case?#2 What rig selection are you using? Should be either Flex or PowerSDR. #3 You might have more success running FLRig and connecting both WSJT-X instances to the one FLRig...that way you end up with just 1 program actually controlling the rig. Theres a PowerSDR rig selection in FLRig that I contributed. Mike W9MDB On Thursday, April 15, 2021, 07:00:06 AM CDT, Andras Bato wrote: Hi Mike,What can I do with my FT450D radio to avoiding losing the reception of the Fox?73,Andy On Thu, Apr 15, 2021 at 1:11 PM Mike Cizek W0VTT wrote: Hello Ton, I had similar problems with 2.4.0 changing freq. Speeding up the polling rate on LP Bridge seems to have cured it. Maybe you can change settings for the virtual ports with your Anan? 73, Mike Cizek W0VTT From: Ton PA0TBR Sent: Thursday, 15 April, 2021 01:55 To: WSJT software development Subject: Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation I am sorry to hear that Andy. Thanks for confirming that it's not just me seeing this. 73, Ton PA0TBR On Wed, 14 Apr 2021 at 23:41, Andras Bato wrote: I've lost a fine DX QSO with the C92RU expedition station thanks to the same QSY phenomena! 73, Andy HA6NN On Wed, Apr 14, 2021 at 8:04 PM Ton PA0TBR wrote: Can someone help me with the following observation? Is this a problem with my settings, is it a bug or is there some other reason? I have 2 instances '1' and '2' which are connected to an ANAN transceiver with CAT over separate virtual COM ports. The system works very well when split operation is set to 'None'. When split operation is set to 'Fake it' then during transmission on instance 1 BOTH instances change their dial frequency according to their respective Audio TX Frequency settings. I had not expected instance 2 to change frequency. The radio VFO 2 does not change. This applies when the last band switch was done using the instance 2 band control. When I do a band switch using the radio (VFO 2), say from 20m to 17m, WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 becomes even more confusing. During transmission on instance 1, the dial frequency for instance 1 changes as before but instance 2 changes back to 20m, again with the corresponding offset. My station: 2 * WSJT-X v2.4.0-rc4 Windows 8.1 Unique identifiers have been assigned to the 2 instances. UDP settings are the same for the 2 instances. UDP server: 239.255.0.0 UDP Server port number: 2237 Outgoing interfaces: loobback_0 Multicast TTL: 1 All 3 UDP checkboxes are checked. 73, Ton PA0TBR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
Hi Mike, What can I do with my FT450D radio to avoiding losing the reception of the Fox? 73, Andy On Thu, Apr 15, 2021 at 1:11 PM Mike Cizek W0VTT wrote: > Hello Ton, > > > > I had similar problems with 2.4.0 changing freq. Speeding up the polling > rate on LP Bridge seems to have cured it. Maybe you can change settings > for the virtual ports with your Anan? > > > > > > 73, > > Mike Cizek W0VTT > > > > *From:* Ton PA0TBR > *Sent:* Thursday, 15 April, 2021 01:55 > *To:* WSJT software development > *Subject:* Re: [wsjt-devel] Strange interaction between 2 instances when > using 'Fake it' split operation > > > > I am sorry to hear that Andy. > > Thanks for confirming that it's not just me seeing this. > > 73, > > Ton PA0TBR > > > > > > On Wed, 14 Apr 2021 at 23:41, Andras Bato wrote: > > I've lost a fine DX QSO with the C92RU expedition station thanks to the > same QSY phenomena! > > 73, > > Andy HA6NN > > > > On Wed, Apr 14, 2021 at 8:04 PM Ton PA0TBR wrote: > > Can someone help me with the following observation? Is this a problem with > my settings, is it a bug or is there some other reason? > > > > I have 2 instances '1' and '2' which are connected to an ANAN transceiver > with CAT over separate virtual COM ports. The system works very well when > split operation is set to 'None'. > > When split operation is set to 'Fake it' then during transmission on > instance 1 BOTH instances change their dial frequency according to their > respective Audio TX Frequency settings. > I had not expected instance 2 to change frequency. > The radio VFO 2 does not change. > This applies when the last band switch was done using the instance 2 band > control. > > When I do a band switch using the radio (VFO 2), say from 20m to 17m, > WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 > becomes even more confusing. > During transmission on instance 1, the dial frequency for instance 1 > changes as before but instance 2 changes back to 20m, again with the > corresponding offset. > > My station: > 2 * WSJT-X v2.4.0-rc4 > Windows 8.1 > > Unique identifiers have been assigned to the 2 instances. > > UDP settings are the same for the 2 instances. > UDP server: 239.255.0.0 > UDP Server port number: 2237 > Outgoing interfaces: loobback_0 > Multicast TTL: 1 > All 3 UDP checkboxes are checked. > > > > 73, > > Ton PA0TBR > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
Hello Ton, I had similar problems with 2.4.0 changing freq. Speeding up the polling rate on LP Bridge seems to have cured it. Maybe you can change settings for the virtual ports with your Anan? 73, Mike Cizek W0VTT From: Ton PA0TBR Sent: Thursday, 15 April, 2021 01:55 To: WSJT software development Subject: Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation I am sorry to hear that Andy. Thanks for confirming that it's not just me seeing this. 73, Ton PA0TBR On Wed, 14 Apr 2021 at 23:41, Andras Bato mailto:ha6nn.a...@gmail.com> > wrote: I've lost a fine DX QSO with the C92RU expedition station thanks to the same QSY phenomena! 73, Andy HA6NN On Wed, Apr 14, 2021 at 8:04 PM Ton PA0TBR mailto:pa0...@mubo.nl> > wrote: Can someone help me with the following observation? Is this a problem with my settings, is it a bug or is there some other reason? I have 2 instances '1' and '2' which are connected to an ANAN transceiver with CAT over separate virtual COM ports. The system works very well when split operation is set to 'None'. When split operation is set to 'Fake it' then during transmission on instance 1 BOTH instances change their dial frequency according to their respective Audio TX Frequency settings. I had not expected instance 2 to change frequency. The radio VFO 2 does not change. This applies when the last band switch was done using the instance 2 band control. When I do a band switch using the radio (VFO 2), say from 20m to 17m, WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 becomes even more confusing. During transmission on instance 1, the dial frequency for instance 1 changes as before but instance 2 changes back to 20m, again with the corresponding offset. My station: 2 * WSJT-X v2.4.0-rc4 Windows 8.1 Unique identifiers have been assigned to the 2 instances. UDP settings are the same for the 2 instances. UDP server: 239.255.0.0 UDP Server port number: 2237 Outgoing interfaces: loobback_0 Multicast TTL: 1 All 3 UDP checkboxes are checked. 73, Ton PA0TBR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net <mailto:wsjt-devel@lists.sourceforge.net> https://lists.sourceforge.net/lists/listinfo/wsjt-devel ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
I am sorry to hear that Andy. Thanks for confirming that it's not just me seeing this. 73, Ton PA0TBR On Wed, 14 Apr 2021 at 23:41, Andras Bato wrote: > I've lost a fine DX QSO with the C92RU expedition station thanks to the > same QSY phenomena! > 73, > Andy HA6NN > > On Wed, Apr 14, 2021 at 8:04 PM Ton PA0TBR wrote: > >> Can someone help me with the following observation? Is this a problem >> with my settings, is it a bug or is there some other reason? >> >> I have 2 instances '1' and '2' which are connected to an ANAN transceiver >> with CAT over separate virtual COM ports. The system works very well when >> split operation is set to 'None'. >> >> When split operation is set to 'Fake it' then during transmission on >> instance 1 BOTH instances change their dial frequency according to their >> respective Audio TX Frequency settings. >> I had not expected instance 2 to change frequency. >> The radio VFO 2 does not change. >> This applies when the last band switch was done using the instance 2 band >> control. >> >> When I do a band switch using the radio (VFO 2), say from 20m to 17m, >> WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 >> becomes even more confusing. >> During transmission on instance 1, the dial frequency for instance 1 >> changes as before but instance 2 changes back to 20m, again with the >> corresponding offset. >> >> My station: >> 2 * WSJT-X v2.4.0-rc4 >> Windows 8.1 >> >> Unique identifiers have been assigned to the 2 instances. >> >> UDP settings are the same for the 2 instances. >> UDP server: 239.255.0.0 >> UDP Server port number: 2237 >> Outgoing interfaces: loobback_0 >> Multicast TTL: 1 >> All 3 UDP checkboxes are checked. >> >> 73, >> Ton PA0TBR >> ___ >> wsjt-devel mailing list >> wsjt-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/wsjt-devel >> > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
Re: [wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
I've lost a fine DX QSO with the C92RU expedition station thanks to the same QSY phenomena! 73, Andy HA6NN On Wed, Apr 14, 2021 at 8:04 PM Ton PA0TBR wrote: > Can someone help me with the following observation? Is this a problem with > my settings, is it a bug or is there some other reason? > > I have 2 instances '1' and '2' which are connected to an ANAN transceiver > with CAT over separate virtual COM ports. The system works very well when > split operation is set to 'None'. > > When split operation is set to 'Fake it' then during transmission on > instance 1 BOTH instances change their dial frequency according to their > respective Audio TX Frequency settings. > I had not expected instance 2 to change frequency. > The radio VFO 2 does not change. > This applies when the last band switch was done using the instance 2 band > control. > > When I do a band switch using the radio (VFO 2), say from 20m to 17m, > WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 > becomes even more confusing. > During transmission on instance 1, the dial frequency for instance 1 > changes as before but instance 2 changes back to 20m, again with the > corresponding offset. > > My station: > 2 * WSJT-X v2.4.0-rc4 > Windows 8.1 > > Unique identifiers have been assigned to the 2 instances. > > UDP settings are the same for the 2 instances. > UDP server: 239.255.0.0 > UDP Server port number: 2237 > Outgoing interfaces: loobback_0 > Multicast TTL: 1 > All 3 UDP checkboxes are checked. > > 73, > Ton PA0TBR > ___ > wsjt-devel mailing list > wsjt-devel@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/wsjt-devel > ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel
[wsjt-devel] Strange interaction between 2 instances when using 'Fake it' split operation
Can someone help me with the following observation? Is this a problem with my settings, is it a bug or is there some other reason? I have 2 instances '1' and '2' which are connected to an ANAN transceiver with CAT over separate virtual COM ports. The system works very well when split operation is set to 'None'. When split operation is set to 'Fake it' then during transmission on instance 1 BOTH instances change their dial frequency according to their respective Audio TX Frequency settings. I had not expected instance 2 to change frequency. The radio VFO 2 does not change. This applies when the last band switch was done using the instance 2 band control. When I do a band switch using the radio (VFO 2), say from 20m to 17m, WSJT-X instance 2 follows accordingly, but now a transmission on instance 1 becomes even more confusing. During transmission on instance 1, the dial frequency for instance 1 changes as before but instance 2 changes back to 20m, again with the corresponding offset. My station: 2 * WSJT-X v2.4.0-rc4 Windows 8.1 Unique identifiers have been assigned to the 2 instances. UDP settings are the same for the 2 instances. UDP server: 239.255.0.0 UDP Server port number: 2237 Outgoing interfaces: loobback_0 Multicast TTL: 1 All 3 UDP checkboxes are checked. 73, Ton PA0TBR ___ wsjt-devel mailing list wsjt-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/wsjt-devel