to fill too soon after
it reached 80%. I'm running 5.5.5.2 and it's still filling to 80%
multiple times a night.
Kind regards,
Eric van Loon
KLM Royal Dutch Airlines
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of
Cheung, Richard
Sent: zondag 15
Hi
The worry about this is I had a PMR opened for this issue on my servers, which
are currently at 5.5.4. I was advised it's a known issue, refer to APAR
IC64438, and the recommended fix is to go to 5.5.5.0
So is 5.5.5.0 also having this issue with the log pinning?
I also believed this was
So are you saying you would use FastBack to disk, then disk to tape ?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of ADSM-L
Sent: Tuesday, 1 March 2011 7:19 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Ang: Re: Ang: Windows servers with
Hi there
Anyone know if there is a version of the TSM Client for Linux x86/x86_64 which
can support ACL for backing up a NFS File System??
I have a document for TSM v6.1 which says it is not supported - wondering if
there is a higher version that supports it, or alternatively, anyone out
What about support for Exchange 2010
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of ?
?
Sent: Monday, 17 January 2011 11:18 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] TDP 6.1.3.0 For Exchange 2007
:-)
10X!
It worked.
When you 'copied' the directory, did the DATE of the directory change??
Thats probably why it didn't back anything new up..
And thats why incrbydates shouldnt be relied upon always - should always
do normal incremental backups as well
-Original Message-
From: ADSM: Dist Stor Manager
Hi there
I am doing some testing to backup a NetApp CIFS filer via TSM - I have a
dedicated front end machine running windows, where I have configured the
dsm.opt file to backup the filer as a network object
Eg in dsm.opt
DOMAIN ALL LOCAL
DOMAIN \\CIFS-Sharename\path
And thats all working
Hi there
Try the following:
- install and configure multiple TSM Journal Instances for different
parts of the file system
- run multiple concurrent backup jobs
- run /incrbydate backups during the weeknights, combined with normal
incrementals on weekends
-Original Message-
From:
What are the nightly deltas on these millions of files?
What do they total in size?
You still would want to run a TSM journal on them in some way...
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Mehdi Salehi
Sent: Thursday, 30 April 2009
Hi there
I have had a few volumes in a disk storage pool go down as a result of
hardware failure.The pool contains staging data for backups of a
number of nodes prior to migrating to tape. There was not sufficient
time for this data to have been copied to the corresponding copypool
either.
Hi there
Seeking some clarifications on this one as there seem to be a bit of
mixed information...
Is there a TSM LIMIT to the path length of a folder/file structure it
backs up - note: TSM LIMIT - not WINDOWS LIMIT??
Eg if a Windows system has a path length limit of say 30,000 characters,
Hello there
I am about to commission at least two new TSM Library Client servers
into my TSM storage server farm.
I would like to offload some nodes from an existing server onto these
new servers.
Is it possible to move, or migrate a bunch of nodes, and their
associated data, from one TSM
Hello..
Is it possible to run a command that can show me, for a specific node,
what data has been backed up within that node, and against what
management class this data is binded against?
Conversely, is it possible to do a command that lists how much data is
binded against all
2008 3:39 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Backupset media goes to Copypool too?
On Dec 26, 2008, at 9:10 PM, Cheung, Richard wrote:
Hi...
So if i wanted these to be kept offsite AND onsite, do I need to
issue a
manual copy command?
The following is speculation, but I'll
to Copypool too?
On Dec 26, 2008, at 9:10 PM, Cheung, Richard wrote:
Hi...
So if i wanted these to be kept offsite AND onsite, do I need to
issue a
manual copy command?
The following is speculation, but I'll bet a beer at SCIDS that the
premise is valid.
If you want two backup sets, run
Hi all
Just a quick query to round out the year...
Lets say I have two media pools, a on-site tape pool called LTO, and the
offsite copy of this LTO pool called COPYPOOL.
If I have generated a backup set into my standard LTO media pool, will
these tapes which are holding the backup set then
: [ADSM-L] Backupset media goes to Copypool too?
This question was answered on Wednesday.
See http://www.mail-archive.com/adsm-l@vm.marist.edu/msg79579.html
On Dec 26, 2008, at 8:39 AM, Cheung, Richard wrote:
Hi all
Just a quick query to round out the year...
Lets say I have two media pools
Hi all
Just a quick query to round out the year...
Lets say I have two media pools, a on-site tape pool called LTO, and the
offsite copy of this LTO pool called COPYPOOL.
If I have generated a backup set into my standard LTO media pool, will
these tapes which are holding the backup set then
At an architectural level, is it a good idea to have your TSM databases
on something like the NetApp???
-Original Message-
From: ADSM: Dist Stor Manager [mailto:ads...@vm.marist.edu] On Behalf Of
Sam Sheppard
Sent: Thursday, 18 December 2008 2:29 PM
To: ADSM-L@VM.MARIST.EDU
Subject:
Hello..
I have a query about some volumes in my library..
One of them is listed as below:
Volume Name: S01553L3
Storage Pool Name: COPYPOOL
Device Class Name: LTO
Estimated Capacity: 667.0 G
Scaled Capacity Applied:
Pct Util: 0.0
Volume Status: Full
Access: Offsite
Pct.
Hello all
I am trying to figure out an effective way to get alerted if a backup
job is idle or not proceeding due to a MediaWait state. I want it
to have the smarts to maybe only alert me if it finds the same
successive node has been in the same MediaWait state for a predetermined
period (eg
Hi all
I have a few nodes which have been decommissioned as production systems
in my environment and therefore no longer exists. I want to delete
them from within TSM as well as delete any filespaces associated with
them - so the data is no longer consuming space in the production tape
storage
([EMAIL PROTECTED])
CDW Berbee
System engineer
7145 Boone Avenue North, Suite 140
Brooklyn Park MN 55428-1511
763-592-5963
www.berbee.com
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
Of Cheung, Richard
Sent: Monday, December 01, 2008 7:02 PM
There are a lot of issues with VSS backups for system state - even apply
the 3 VSS fixes you need to apply does not guarantee you will get a 100%
reliable system state backup.
My recommendation is to apply the hotfixes for sure, BUT also to set up
a ntbackup schedule task on your server to run a
Hi all
Need to know if this is feasible as an idea..
We are about to move to a LTO4 media library instead of LTO3s - by
replacing the remaining LTO3 drives we have with LTO4s... by marking
the existing LTO3 tapes all 'read only' and putting in LTO4 media for
write operatons etc, eventually our
for permanent offsite copies
What kind of library do you have?
(What you are suggesting usually works just fine.)
On Tue, Nov 18, 2008 at 8:31 AM, Cheung, Richard
[EMAIL PROTECTED]wrote:
Hi all
Need to know if this is feasible as an idea..
We are about to move to a LTO4 media library instead
Hello
I have been analysing the size of my Primary Storage and Copy Storage,
analysing the kind of backups I have been doing for different nodes and
the kind of data being retained. Basically I have found at least 40TB
of data in the Primary storage which really is not needed, and have
approval
Richard, I have always been not 100% crystal clear on this
If one does a 'delete filespace', does the data on the tapes remain
there until the next expiration or reclamation process runs?
Conversely, a delete volume would do it pretty well instantly, right?
-Original Message-
Hi..
I have done some checks on my system on the Number of tapes to be
reclaimed in my main tape pool, and discover the following:
No of tapes awaiting reclamation at 99% utilized = 86
No of tapes awaiting reclamation at 80% utilized = 51
No of tapes awaiting reclamation at 70% utilized =
: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Cheung, Richard
Sent: Monday, November 10, 2008 2:56 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] reclamation
Hi..
I have done some checks on my system on the Number of tapes to be
reclaimed in my main tape pool, and discover
is:
upd stg tapepool recl=99 reclaimpr=X (where x=number of reclaim
processes
to start).
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Cheung, Richard
Sent: Monday, November 10, 2008 2:56 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] reclamation
] On Behalf Of
Cheung, Richard
Sent: Monday, November 10, 2008 3:38 PM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Re: reclamation
I am using a SQL query to query how many tapes to be reclaimed at a
certain level
Select count(*) from volumes where (stgpool_name='tapepool' and
upper(status)='FULL
Bronder
Sent: Tuesday, 11 November 2008 9:57 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Re: reclamation
Cheung, Richard wrote:
Just to clarify - is that command going to permanently alter my
stgpool
reclaim thresholds?? Or is that the command to do a manual
reclamation? Why doesnt
What is the command to show how much data is currently stored in a
storage pool - eg tapepool? Not for any specific individual nodes -
just at a pure 'how much data is in a storage pool' level?
html
body
font face=arial color=#808080 size=-2img
alt=Santos Logo
?
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of Cheung,
Richard
Sent: den 5 november 2008 01:00
To: ADSM-L@VM.MARIST.EDU
Subject: Re: [ADSM-L] Unavailable Tapes - cannot do Move Data
It is a 3584 SCSI library. I am running a Library Manager - Library
Client
it is in
the
library, not find it and revery back to 'unavailable'. I had two of
these
last week
Jeff
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Cheung, Richard
Sent: 04 November 2008 09:53
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Unavailable Tapes
-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf
Of
Cheung, Richard
Sent: 04 November 2008 09:53
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Unavailable Tapes - cannot do Move Data
Hello..
I have a number of tapes showing as access=unavailable in the system.
I
have tried
Hello..
I have a number of tapes showing as access=unavailable in the system. I
have tried to change the state to readwrite to see if it would work
(maybe some kind of read / load issue) but that didn't work. I have
then tried to change the state to readonly, and do a 'move data' command
to
@VM.MARIST.EDU
Subject: Re: [ADSM-L] Unavailable Tapes - cannot do Move Data
What type of library?
Andy Huebner
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Cheung, Richard
Sent: Tuesday, November 04, 2008 7:10 AM
To: ADSM-L@VM.MARIST.EDU
Subject: Re
@VM.MARIST.EDU
Subject: Re: [ADSM-L] How to stop data from expiring
On Nov 2, 2008, at 11:23 PM, Cheung, Richard wrote:
...
Today is Monday.. I have just been told that I need to keep the
backup
for /etc from Saturday until further notice due to a business
requirement
...
It sounds like
on Result Code -99 at the TSM Support Page,
http://www.ibm.com/software/sysmgmt/products/support/IBMTivoliStorageMan
ager.html
On Nov 3, 2008, at 2:25 AM, Cheung, Richard wrote:
Hello..
Have recently upgraded most of my nodes to v5.5.1. I am now seeing a
lot of Failed - Result Code -99
timeframe.
[RC]
-Original Message-
From: ADSM: Dist Stor Manager [mailto:[EMAIL PROTECTED] On Behalf Of
Cheung, Richard
Sent: Sunday, November 02, 2008 11:25 PM
To: ADSM-L@VM.MARIST.EDU
Subject: [ADSM-L] Result Code -99 - Job Failed
Hello..
Have recently upgraded most of my nodes to v5.5.1
Hello
I would like to know how to stop data from a specific filespace within a
node from being expired based on that node's copygroup membership
Eg lets say I have a node called ABC against CopyGroup called 'Nightly'
which says keep 7 versions.
Within the node ABC it has paths
/home
/etc
/bin
Hello..
Have recently upgraded most of my nodes to v5.5.1. I am now seeing a
lot of Failed - Result Code -99 in the operational reporting I receive
daily. A check of the dsmerror.log shows no real major problems - cant
find much on what -99 mean... anyone have any ideas?
Richard
html
Do the following:
Obtain hotfixes from Microsoft KB articles
KB934016, KB940349, KB951568
Apply these hotfixes - applicable for Windows 2003 SP2 and above.
In windows dsm.opt files, put in a line
TESTFLAGS VSSSYSTEMPROVIDER
So dsm.opt may look like:
PASSWORDACCESS GENERATE
45 matches
Mail list logo
