Re: restoring to different destination via schedule

m.com/developerworks/community/wikis/home/wiki/Tivoli%20Storage%20Manager "ADSM: Dist Stor Manager" <ADSM-L@VM.MARIST.EDU> wrote on 2017-01-20 16:18:07: > From: "Lee, Gary" <g...@bsu.edu> > To: ADSM-L@VM.MARIST.EDU > Date: 2017-01-20 16:19 > Subject:

restoring to different destination via schedule

How do you specify the destination file spdec when scheduling a restore command? I see where the objects parm specifys file to restore. Thanks.

Re: Hyper-V schedule

On Monday, 26 December 2016, S Kumar <our@gmail.com> wrote: > Hi, > > What could i understand from your input is > > 1. Backup is not schedule daily for all VM > 2. Backup is schedule weekly by physical server wise. > If any VM failover from one box to another

Re: Hyper-V schedule

Hi, What could i understand from your input is 1. Backup is not schedule daily for all VM 2. Backup is schedule weekly by physical server wise. If any VM failover from one box to another box before hitting the tsm schedule, then it is missed from backup. If the above things are right then i

Re: Hyper-V schedule

Well depends.. Our schedule is like this.. Hv clustermis hv500 with cluster nodes hv501, hv502, hv503, and hv504 So Monday we backup all vms from hv501, Tuesday vms from hv502 and so on.. Vms from each host are backed up in serial you can run in parallel but it is possible to have issue

Re: Hyper-V schedule

> > mode. Each VM can fail to any server if one server fail. > > > > As per documentation, have to define proxy authentication and define > asnode > > option in dsm.opt file. > > > > Backup can be schedule either in windows scheduler or from tsm scheduler. &g

Re: Hyper-V schedule

t of four physical box where Hyper-V is configured in cluster > mode. Each VM can fail to any server if one server fail. > > As per documentation, have to define proxy authentication and define asnode > option in dsm.opt file. > > Backup can be schedule either in windows sch

Hyper-V schedule

be schedule either in windows scheduler or from tsm scheduler. What is the best option for Hyper-V backup? Is there any other way to schedule Hyper-V backup? Regards, S Kumar.

Re: 3 Generation (GFS) Backup Schedule setup using TSM

Hi, Question: 19 copies of the "same" data. Each copy 500GB. Tape library used a storage. Would like a cheaper solution. Let's start:19*500GB is 9½TB. Disk drives are up to 6TB today. The data will fit in 2 disk drives - without using dedup and compression.

3 Generation (GFS) Backup Schedule setup using TSM

Hello Andreas, sorry to hear tat this sort of thing is still happening this century... Have you had a look at container pools and dedup? It would ease the storage-side pain quite a bit, with drawbacks in taking copies to tape. I have been testing the dedup + compression feature, an apart from

Re: 3 Generation (GFS) Backup Schedule setup using TSM

On Tue, 6 Dec 2016, Ryder, Michael S wrote: Sorry, backing up into a TSM Server with TSM Storage Pools and TSM Tape Library. Andreas What are you backing up to? tape? disk? purpose-built storage like a Data Domain? Mike Best regards, Mike

Re: 3 Generation (GFS) Backup Schedule setup using TSM

What are you backing up to? tape? disk? purpose-built storage like a Data Domain? Mike Best regards, Mike , x7942 RMD IT Client Services On Tue, Dec 6,

3 Generation (GFS) Backup Schedule setup using TSM

Hello TSM B/A experts out there, for a new project there is a Backup/DR requirement for a 3 Generation Backup also called Grandfather-Father-Son (GFS). We cannot rewrite the requirements, they are set! I have discussed with several colleagues, they suggested a daily incremental, 4 or 5x

Re: Multiple Schedule in TSM ERP SAP

m> написал(а): > > Hello, > > I have below schedule asked by one of my customer for SAP server. They are > using TSM ERP for backup. > > 1. Daily SAP online full backup, Retention is 14 days. > 2. Monthly SAP Offline Full Backup, Retention is 60 days. > 3. Yearly SAP Offline Fu

Multiple Schedule in TSM ERP SAP

Hello, I have below schedule asked by one of my customer for SAP server. They are using TSM ERP for backup. 1. Daily SAP online full backup, Retention is 14 days. 2. Monthly SAP Offline Full Backup, Retention is 60 days. 3. Yearly SAP Offline Full Backup, Retention is 365 days. How we can

Re: File expiration in schedule log

: Wednesday, January 20, 2016 12:12 PM To: ADSM-L@VM.MARIST.EDU Subject: File expiration in schedule log I've never had to deal much with the client schedule log. But, do the statements below (from dsmsched.log) mean that a file was marked to be expired, and that a subsequent EXPIRE INVENTORY

File expiration in schedule log

I've never had to deal much with the client schedule log. But, do the statements below (from dsmsched.log) mean that a file was marked to be expired, and that a subsequent EXPIRE INVENTORY on the TSM server would have removed the file? 01/19/2016 19:23:14 Expiring-->5,898,240 \

Enhanced schedule

Dear Team,, There is requirement from customer to schedule backup in the below frequency but looks it's not possible in TSM. Any other work around Daily : Monday to Saturday Weekly : Sunday Monthly : first day of month Dayofmonth don't support dayofweek value if it's not ANY When monthly

Re: Enhanced schedule

: [ADSM-L] Enhanced schedule Dear Team,, There is requirement from customer to schedule backup in the below frequency but looks it's not possible in TSM. Any other work around Daily : Monday to Saturday Weekly : Sunday Monthly : first day of month Dayofmonth don't support dayofweek value if it's

Re: Maintenance script schedule problem

instance... Thomas Taylor System Administrator Jos. A. Bank Clothiers Cell (443)-974-5768 From: Vandeventer, Harold [BS] harold.vandeven...@ks.gov To: ADSM-L@VM.MARIST.EDU, Date: 12/26/2013 02:06 PM Subject: Re: [ADSM-L] Maintenance script schedule problem Sent by: ADSM: Dist Stor Manager

Maintenance script schedule problem

Hello, This is my first time posting so please let me know if I missed anything. I am also very new to TSM in general. I am running TSM Server 6.3.3 When I try to schedule the maintenance script I have created to run every day I get an error, but if I choose just one day it works fine

Re: Maintenance script schedule problem

When I try to schedule the maintenance script I have created to run every day I get an error, but if I choose just one day it works fine. I am trying to edit the schedule from the TIP as I know nothing os the TSM CLI. I receive 3 errors: ANRW0137E the action cannot be completed ANRW0163E

Re: Maintenance script schedule problem

Welcome to TSM. Are you seeing the error when CREATING the schedule or attempting to change an existing schedule? For an existing schedule, I select the Change Schedule Repetition button, then Repeat Daily (every one or more days), the next query is for Run the schedule every _ days

Maintenance script schedule problem

Can you see the script for every day ? +-- |This was sent by bobpatrick808...@yahoo.fr via Backup Central. |Forward SPAM to ab...@backupcentral.com. +--

Maintenance script schedule problem

Can you showing the script for every day please ? +-- |This was sent by bobpatrick808...@yahoo.fr via Backup Central. |Forward SPAM to ab...@backupcentral.com.

Re: Maintenance script schedule problem

I am running admin center 6.3.3.000 I am editing an existing schedule. I do not see all of the prompts you mentioned. I click Server maintenanceserver nameschedule I have check boxes for each day to choose, but if I check more than one and click apply or OK I get the errors. I do not have

Re: Maintenance script schedule problem

in the script? -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tom Taylor Sent: Thursday, December 26, 2013 10:27 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Maintenance script schedule problem I am running admin center 6.3.3.000 I am

Re: Maintenance script schedule problem

] Maintenance script schedule problem Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU I don't use the Server Maintenance approach and attempts to use it just now indicate I don't have any defined. My maintenance scripts are all managed via the Manage Servers approach. From Manage Servers, click

Re: Maintenance script schedule problem

you're trying to build out the first deployment. -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tom Taylor Sent: Thursday, December 26, 2013 12:38 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Maintenance script schedule problem I am

Re: Maintenance script schedule problem

: Vandeventer, Harold [BS] harold.vandeven...@ks.gov To: ADSM-L@VM.MARIST.EDU, Date: 12/26/2013 02:06 PM Subject: Re: [ADSM-L] Maintenance script schedule problem Sent by: ADSM: Dist Stor Manager ADSM-L@VM.MARIST.EDU For the ADSM-L group: is there a set of sample scripts at IBM or any that get installed

VSS backup crashes TSM Schedule Service

I've been thrown the responsibility to change the TSM Server IP address used by some nodes after they've exported to a new TSM server. In one case, (node Windows 2003 running TSM Client 6.2.3.00), the TSM Schedule Service crashes if SYSTEMSTATE backup is attempted. The opt file has

Re: VSS backup crashes TSM Schedule Service

crashes TSM Schedule Service Sent by: ADSM: Dist Stor Manager ADSM-L@vm.marist.edu I've been thrown the responsibility to change the TSM Server IP address used by some nodes after they've exported to a new TSM server. In one case, (node Windows 2003 running TSM Client 6.2.3.00), the TSM

Re: Update Schedule failed - resolved

I was running the backups from a batch scheduling system. Yesterday I had two executions of the backup jobs, at 6 and 10. I've disabled the TSM schedule, restarted the services on the clients, and have adjusted the submission times in the batch scheduling system. Thank you all for your help

Re: Update Schedule failed - resolved

Good! Have a lovely day. On Fri, May 3, 2013 at 4:03 PM, Schneider, Jim jschnei...@ussco.com wrote: I was running the backups from a batch scheduling system. Yesterday I had two executions of the backup jobs, at 6 and 10. I've disabled the TSM schedule, restarted the services

Update Schedule failed

TSM 6.2.2.0 on AIX 6.1 TSM 6.3.0.0 on Windows 2008 R2 My attempt to change a schedule start time has failed. I have a cmd schedule that runs Exchange backups. Originally scheduled for 17:00 I find I cannot change the start time to 22:00. These commands show that the schedule time was changed

Re: Update Schedule failed

Jim, it looks like this schedule is not more used. Expiration: 02/17/13 23:59:59 Hope this helps. On Thu, May 2, 2013 at 2:29 PM, Schneider, Jim jschnei...@ussco.com wrote: TSM 6.2.2.0 on AIX 6.1 TSM 6.3.0.0 on Windows 2008 R2 My attempt to change a schedule start time has failed

Re: Update Schedule failed

Hello I need the dsmerror.log and dsmsched.log files logs for last day since when you modified the schedule's in the dsmsched.log file,is the schedule still showing the start time is 17:00hrs or 22:00hrs,give me the logs Cheers, Gopikrishna On Thu, May 2, 2013 at 3:29 PM, Schneider, Jim

Re: Update Schedule failed

-Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Carlo Zanelli Sent: Thursday, May 02, 2013 8:38 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Update Schedule failed Jim, it looks like this schedule is not more used. Expiration: 02/17/13 23

Re: Update Schedule failed

-Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Carlo Zanelli Sent: Thursday, May 02, 2013 8:38 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Update Schedule failed Jim, it looks like this schedule is not more used. Expiration: 02/17

Re: Update Schedule failed

I must agree with Jim on the fact that it's a bit strange backups where still running even though the schedule has expired. The backups must be managed by a different schedule than the one Jim was trying to edit. The dsmsched.log should be able to provide more info as well. Cheers Rick On May 2

Re: Update Schedule failed

The dsmsched.log only shows the regular server incremental backup scheduled at 01:59. The TDPschedule log had 'no schedule returned'. Now that I have updated the schedules with 'exp=never' and restarted the services I see the scheduled start times on all three servers - 22:00 for incrementals

include options and schedule

Hello! when i'm using the option: Include.Image E: IMAGE_MC is this option also applied when im scheduling an image backup through the server? or only when i'm using the dsmc.exe? +-- |This was sent by dtz...@gmail.com via

include options and schedule

and another belonging question- what about different mgmt class for incremental full and backup? how do i do that? +-- |This was sent by dtz...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com.

Re: include options and schedule

You can't do that. A file can only be bound to one management class. -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Dunul Sent: Wednesday, May 01, 2013 10:19 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] include options and schedule

last day of the month client schedule?

Is there any way with enhanced client scheduling to specify a run on the last day of the month? Wanda Prather | Senior Technical Specialist | wanda.prat...@icfi.com | www.icfi.com ICF International | 401 E. Pratt St, Suite 2214, Baltimore, MD 21202 | 410.539.1135 (o)

Re: last day of the month client schedule?

Hi Wanda, See : DAYOFMonth Specifies the day of the month to run the schedule. This parameter is used only with enhanced schedules. You can either specify ANY or a number from -31 through 31, excluding zero. Negative values are a day from the end of the month, counting backwards

Re: How to schedule new task in case of previous one completed

. If the command has WAIT=YES, use it. It's really the easiest way. PITFALL: A TSM script containing a long-running command with WAIT=YES should never be run from a live console, not even for testing and debugging. It should only be started by an administrative (T=A) schedule. If you accidentally start

How to schedule new task in case of previous one completed

Thank you! I know about these options. But how exactly I can apply them? How to check that DB backup was successful and I can proceed next task? +-- |This was sent by kniko...@gmail.com via Backup Central. |Forward SPAM to

Re: How to schedule new task in case of previous one completed

already know. Presumably you're talking about running a script as an administrative schedule. Scripts can run in two modes: parallel and serial. If you want to make sure one command finishes before another starts, you must be in serial mode. Also, my observations make me doubt that serial mode

How to schedule new task in case of previous one completed

Thanks, trying to go through this one. Actually I have an RMAN script which backups the DB. It is coded in the schedule as a run script. I need to figure out if it completed ok and in this case run another task to backup data files on another server. So I need to setup a trigger for that. All

Re: How to schedule new task in case of previous one completed

by an administrative (T=A) schedule. If you accidentally start it from a live dsmadmc console session, your terminal session will be stuck until it finishes. Attempts to break out can result in an infinite loop on your client machine. Last time I did this, my SSH client crashed and it was ugly. Unix tricks

How to schedule new task in case of previous one completed

on in the schedule completed without errors? Can anyone help me? +-- |This was sent by kniko...@gmail.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +--

Re: How to schedule new task in case of previous one completed

Hi, you can use presched and postsched command when defining schedule.. Regards Chavdar On Sun, Dec 23, 2012 at 4:01 PM, nkir tsm-fo...@backupcentral.com wrote: Hi to All! I have a problem to find out out how to configure such behavior in TSM 6.3 for Windows: I need to proceed

Re: Schedule Port on client?

Is the TSM Client Acceptor Daemon service running on the exchange box? That is the service that listens on 1502 when webports 1502 and managedservices schedule are in dsm.opt. Also does the Windows firewall, if running, allow incoming on 1502? David -Original Message- From

Re: Schedule Port on client?

] Schedule Port on client? We're running a TSM Schedule to prompt TDP-Exchange 6.x to start a backup. It issues the C:\EXCINCR.CMD command. Two Exchange servers one will run a TSM-Server initiated backup, one will not. The node manager claims that 1502 is the port-spec in the Exch DSM.OPT

Schedule Port on client?

I'm working with a node manager, we're having issues with the client-side port value that is specified in the DSM.OPT file. It's typically 1501 for the BAClient. Where in the TSM database can I find that value? Harold Vandeventer Systems

Re: Schedule Port on client?

Of Vandeventer, Harold [BS] Sent: Tuesday, August 28, 2012 10:34 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] Schedule Port on client? I'm working with a node manager, we're having issues with the client-side port value that is specified in the DSM.OPT file. It's typically 1501 for the BAClient. Where

Re: Schedule Port on client?

Services harold.vandeven...@ks.gov (785) 296-0631 -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Rick Adamson Sent: Tuesday, August 28, 2012 10:13 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Schedule Port on client? From the server cli issue q

Re: Schedule Port on client?

...and schedmode is prompted. -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Rick Adamson Sent: Tuesday, August 28, 2012 11:13 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Schedule Port on client? From the server cli issue q opt, or q

Re: Schedule Port on client?

Yep.. prompted. Somewhere, on the TSM Server side, is stored the port number the client has specified in their DSM.OPT file. Wherever the prompted schedule keeps the value to call the node at its IP and then port number. I'm trying to find that value. It'll be 1501 for the BAClient

Re: Schedule Port on client?

q n f=d but IIRC, the TDP Exchange doesn't schedule so there is no such info in the DB. -- Met vriendelijke groeten/Kind regards, Remco Post r.p...@plcs.nl +31 6 24821622 On 28 aug. 2012, at 19:30, Vandeventer, Harold [BS] harold.vandeven...@ks.gov wrote: Yep.. prompted. Somewhere

Re: Schedule Port on client?

@VM.MARIST.EDU Sent: Tuesday, August 28, 2012 12:30 PM Subject: Re: [ADSM-L] Schedule Port on client? Yep.. prompted. Somewhere, on the TSM Server side, is stored the port number the client has specified in their DSM.OPT file. Wherever the prompted schedule keeps the value to call the node at its IP

Re: Schedule Port on client?

-Harold Vandeventer wrote: - Somewhere, on the TSM Server side, is stored the port number the client has specified in their DSM.OPT file. Wherever the prompted schedule keeps the value to call the node at its IP and then port number. I'm trying to find that value. It'll be 1501

Re: Schedule Port on client?

We're running a TSM Schedule to prompt TDP-Exchange 6.x to start a backup. It issues the C:\EXCINCR.CMD command. Two Exchange servers one will run a TSM-Server initiated backup, one will not. The node manager claims that 1502 is the port-spec in the Exch DSM.OPT file and that both

Re: TDP schedule with CAD

Thanks Bill, I have configured a scheduler for normal files which is perfectly invoked by CAD and performes the incremental backup. What I understand is that the TDP schedule should be created with autostart:no and startnow:no in order to be started by above CAD? Please correct me if I am

Re: TDP schedule with CAD

The TDP's are all run as an ACTION=COMMAND schedule to run the agent program. Like SQLFULL.CMD or EXCFULL.CMD that come as the .SMP files you customize. I normally use the same CAD for all scheduling for a node. That way I don't need to worry about the incremental backup running at the same time

TDP schedule with CAD

Hi, I have configured TSM client scheduler with CAD and server can successfully prompt the client to backup files and directories. Can the existing CAD be used to control the TDP SQL schedule as well? Regards, Mehdi

Re: TDP schedule with CAD

the existing CAD be used to control the TDP SQL schedule as well? Regards, Mehdi

ANR8213W schedule fails client timeout

A few clients are failing with ANR8213W Session open with 10.1.4.130 timed out If we restart the tsm service on the client the next scheduled backup runs ok but the next one times out. I even coded the hla and lla and set the client option file with tcpclientaddress, still issues. Any

Re: ANR8213W schedule fails client timeout

dsmcsvc still running, no indication in any error logs Tim On Wed, 6 Jun 2012 09:44:48 -0400 Richard Sims r...@bu.edu wrote: Tim - Check the client logs for correlating info. It might be the case that the previous schedule is still running, or the CAD or DSMC process went away, etc

Re: ANR8213W schedule fails client timeout

To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] ANR8213W schedule fails client timeout A few clients are failing with ANR8213W Session open with 10.1.4.130 timed out If we restart the tsm service on the client the next scheduled backup runs ok but the next one times out. I even coded the hla and lla

Re: ANR8213W schedule fails client timeout

Is this windows 2008 ? -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Ehresman,David E. Sent: Wednesday, June 06, 2012 9:19 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: ANR8213W schedule fails client timeout This is a classic symptom

Re: ANR8213W schedule fails client timeout

on the client. David Ehresman -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Tim Brown Sent: Wednesday, June 06, 2012 9:23 AM To: ADSM-L@VM.MARIST.EDU Subject: [ADSM-L] ANR8213W schedule fails client timeout A few clients are failing with ANR8213W

Re: ANR8213W schedule fails client timeout

, not specified on a webports option, it is kind of hard to write the firewall rule. David -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Alex Paschal Sent: Wednesday, June 06, 2012 12:56 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] ANR8213W schedule

Re: ANR8213W schedule fails client timeout

@VM.MARIST.EDU] On Behalf Of Alex Paschal Sent: Wednesday, 06 June, 2012 12:56 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: ANR8213W schedule fails client timeout From the TSM server: telnet hla lla Example: telnet servera 1501 If it hangs and eventually times out, you have a firewall problem

Re: ANR8213W schedule fails client timeout

schedule fails client timeout Netstat is listening on port 1501, tcpport is 1500 in dsm.opt Telnet to server via 1501 works 1500 doesn't. We have always coded tcpport 1500 in client dsm.opt ? Other 2008 servers configured same work. Thanks, Tim -Original Message- From: ADSM: Dist Stor Manager

Re: ANR8213W schedule fails client timeout

Not using dsmcad Thanks, Tim -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Ehresman,David E. Sent: Wednesday, 06 June, 2012 2:51 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: ANR8213W schedule fails client timeout I may have made a false

Re: ANR8213W schedule fails client timeout

problem. -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Ehresman,David E. Sent: Wednesday, June 06, 2012 2:51 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] ANR8213W schedule fails client timeout I may have made a false assumption

Re: Schedule Question

Hi Robert I usually handle this by having a schedule that runs every hour, and two subsidiary admin schedules. One sets the hourly schedule to expiration=N to start it running. the second sets the hourly schedule expiration to a date in the past to stop it from running. Regards Steve Steven

Re: Schedule Question

I just have an admin schedule that runs after the last hourly log job and before the dif/full backup job that updates the log backup schedule to a STARTDATE/STARTTIME= to however many hours the diff/full backup runs. Bill -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L

Re: Schedule Question

different TCP/IP port for each schedule ... Regards Chavdar On Sun, May 13, 2012 at 9:17 PM, Bill Boyer bjdbo...@comcast.net wrote: I just have an admin schedule that runs after the last hourly log job and before the dif/full backup job that updates the log backup schedule to a STARTDATE

Schedule Question

Hi to all, Im trying to create a schedule in TSM that will run in a specific window, e.g: Im running backup of SSQL Log every hour, but when the Differential/Full Backup is running, the Log files are Missed, My question is can I run schedule from 08:00 untill 21:00 ? Far as I tested, I cant

Start Schedule Is Denied

I have a curious situation with one or two clients issuing the following message: 4/9/2012 10:52:32 PM ANR2568E Request for node SASBICOMP.VCU.EDU to start schedule BANNER at 04/10/2012 10:00:00 PM is denied. Current time is 04/09/2012 10:52:31 PM. Trying to figure out what is going

Re: Start Schedule Is Denied

SASBICOMP.VCU.EDU to start schedule BANNER at 04/10/2012 10:00:00 PM is denied. Current time is 04/09/2012 10:52:31 PM. Trying to figure out what is going on. The hits I found thus far talk about an old client issue (these nodes are at 6.2.2.x and higher) or a possible date/time issue

Re: Start Schedule Is Denied

the schedule after the start of the startup window, thus the confusing error message. Thanks for the help. BTW, the time and timezones are correct. Zoltan Forray TSM Software Hardware Administrator Virginia Commonwealth University UCC/Office of Technology Services zfor...@vcu.edu - 804-828-4807 Don't

Re: Windows 2008 client ..TSM schedule won't run

\DATA\MSSQL.1\MSSQL\Data\*.* MANAGEDSERVICES WEBCLIENT SCHEDULE However, here is another dsm.opt from one of the 4 that was missing (but now the backup is completing successfully) and I did not have to comment out the TCPCLIENTADDRESS xxx.x.x.xxx and I DON'T have the following. Webport 1552

Re: Windows 2008 client ..TSM schedule won't run

Thanks Richard for this information. -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Richard Sims Sent: Sunday, November 20, 2011 6:33 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: Windows 2008 client ..TSM schedule won't run Timothy - Those

Re: Windows 2008 client ..TSM schedule won't run

. Harold Vandeventer -Original Message- From: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Hughes, Timothy Sent: Monday, November 21, 2011 6:14 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run Thanks Richard

Re: Windows 2008 client ..TSM schedule won't run

: ADSM: Dist Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Vandeventer, Harold [BS] Sent: Monday, November 21, 2011 9:18 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run Good details from Richard. Are all the clients on the same remote network

Re: Windows 2008 client ..TSM schedule won't run

Stor Manager [mailto:ADSM-L@VM.MARIST.EDU] On Behalf Of Prather, Wanda Sent: Monday, November 21, 2011 10:48 AM To: ADSM-L@VM.MARIST.EDU Subject: Re: Windows 2008 client ..TSM schedule won't run Another thing I've done in cases like this is temporarily switch from prompted to polling mode. That's

Re: Windows 2008 client ..TSM schedule won't run

\MSSQL.1\MSSQL\Data\*.* MANAGEDSERVICES WEBCLIENT SCHEDULE This backup ran successfully LANG AMENG DOMAIN ALL-LOCAL TCPSERVERADDRESS .xxx..xx.xx PASSWORDACCESS GENERATE TCPCLIENTADDRESS xxx.x.x.xxx tcpclientp 1581 webports 1500 1501 NODENAME XXX Errorlogname c:\progra~1\tivoli\tsm

Re: Windows 2008 client ..TSM schedule won't run

advising you to examine two key logs in this problem: the dsmwebcl.log produced by CAD, and especially the TSM server Activity Log, which contains the most important information about the schedule attempts. What is recorded in those logs at the schedule times? Richard Sims

Re: Windows 2008 client ..TSM schedule won't run

Hi Richard, the dsmwebcl.logs shows nothing all it says is ok I am ready to backup, however in the morning it will just show the same thing the schedule was ready to backup but the Backup never runs? See below it showed it was ready to backup at midnite but it didn't backup. This morning

Re: Windows 2008 client ..TSM schedule won't run

Timothy - Those direct peer logs were just what were needed... Rather than showing nothing, they reveal the absence of something, that being network connectivity between the TSM server and client, at least at the midnight hour. The client has initialized CAD to listen on port 1500, and the

Re: Windows 2008 client ..TSM schedule won't run

..TSM schedule won't run On the node side, open a command prompt and issue NETSTAT -A -N Do you see the port number listening? The TSM default is 1501, I believe. In my case: 'TCP 0.0.0.0:1501 0.0.0.0:0 LISTENING' is displayed. If the port is listening and you can't TELNET to it (assuming you

Re: Windows 2008 client ..TSM schedule won't run

client ..TSM schedule won't run On Nov 16, 2011, at 2:54 PM, Hughes, Timothy wrote: Thanks Al No, there no entries in the scheduler log (or dsmerror logs) The schedule log is just shows the schedule is ready to start but it doesn't. Not familiar with the power settings'? I will have to check

Re: Windows 2008 client ..TSM schedule won't run

The listening port number is your choice; 1501 is the default for the TSM client. Look at your DSM.OPT file, it should have a line similar to: TCPCLIENTPORT 1501. Then, stop/start the schedule service in Windows services to get it to read the option. The netstat -a -n should then display

Re: Windows 2008 client ..TSM schedule won't run

@VM.MARIST.EDU 11/17/2011 07:19 AM Please respond to ADSM-L@VM.MARIST.EDU To ADSM-L@VM.MARIST.EDU cc Subject Re: [ADSM-L] Windows 2008 client ..TSM schedule won't run Thanks Richard! No changes were made to the cad and define Association is in place. -Original Message- From: ADSM

Re: Windows 2008 client ..TSM schedule won't run

A. Clark Sent: Thursday, November 17, 2011 12:25 PM To: ADSM-L@VM.MARIST.EDU Subject: Re: Windows 2008 client ..TSM schedule won't run On Windows, the real details of the client configuration is comprised of: 1) The information in dsm.opt 2) The information stored in the services config and returned

Re: Windows 2008 client ..TSM schedule won't run

TCPCLIENTADDRESS 246.4.4.187 webports 1500 1501 tcpclientp 1581 NODENAME sphinex349 I stopped/started the schedule service then The netstat -a -n now shows 1581 (that's the value I choose) TCP0.0.0.0:1501 0.0.0.0:0 LISTENING TCP0.0.0.0:1581 0.0.0.0:0

  1   2   3   4   5   6   7   8   9   >