[AFMUG] Low Temperature AC

I'm looking to get a Mini Ductless Split system to put in a small server closet. Over the winter our outdoor temps get down to the -10 to -20F range but heat is still generated in the middle of the building. Looking at the Mitsubishi 'P' Series "Mr Slim" Lots of data sheets talk about the

Re: [AFMUG] Cambium Backups

I don't know if 650 and 820 are yet in Unimus, but that's what you should use for all configuration management. If they aren't yet in Unimus, I can get them in Unimus for the next release, pending telnet or SSH access to the device and that the device can dump its configuration there.

Re: [AFMUG] Low Temperature AC

Ah, yes, that’s it, crankcase heater. I was close. From: Aeron Wireless Sent: Wednesday, August 15, 2018 9:10 AM To: af@af.afmug.com Subject: Re: [AFMUG] Low Temperature AC I've seen two different kits. One, more common in refrigeration, is a crank case heater to keep the oil fluid. The

Re: [AFMUG] Low Temperature AC

You are going to have to order it from a dealer. Order low ambient temp with the wind baffles. Another suggestion is to look at an air-to-air exchanger to trade out warm air in the cooler weather. Then A/C isn't needed in really cold weather. On Wed, Aug 15, 2018 at 11:46 AM Nate Burke wrote:

Re: [AFMUG] Low Temperature AC

I've seen two different kits. One, more common in refrigeration, is a crank case heater to keep the oil fluid. The other (more common in HVAC) controls (reduces) the condenser's fan speed to prevent it from (literally) freezing up. On Wed, Aug 15, 2018 at 11:07 AM wrote: > I don't know what is

Re: [AFMUG] Low Temperature AC

Any ideas how to find the magical part numbers? I have come up completely empty so far other than the sheets that say 'kit needed' with no other explanation. On 8/15/2018 10:31 AM, Aeron Wireless wrote: It will be from the manufacturer. It needs to be sized correctly. To much and it wastes

[AFMUG] T-Shirts

Tired of your vendors not listening? Be passive-aggressive at conferences! https://teespring.com/stores/mikes-store-24 - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP -- AF mailing list AF@af.afmug.com

[AFMUG] Cambium Backups

If you guys using Cambium 650 and 820 PtP units, do you perform any sort of automated backups of their configurations? If so, how do you go about that? Thanks, Sam -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Low Temperature AC

It will be from the manufacturer. It needs to be sized correctly. To much and it wastes energy, too little and it doesn't heat the oil. Mitsubishi makes their own components, unlike a no-name brand. On Wed, Aug 15, 2018 at 11:25 AM Nate Burke wrote: > So they're added a s a 3rd party option,

Re: [AFMUG] [WISPA Members] Dear WISPA...

On 8/15/18 14:39, Mike Hammett wrote: https://www.denx.de/wiki/U-Boot Clearly Cambium downloaded the source code for U-Boot and "hacked" UBNT's super secret hardware. Because nobody else could possibly boot a generic Atheros without hacking and collusion. -- AF mailing list

[AFMUG] Indoor HDTV Antenna

I'm looking to get an indoor HDTV Antenna. Any better or worse than others? Chicago Transmitters are about 35 miles away over lake Michigan (Antenna will be used in Indiana). It looks like on Amazon they're listed by mile range, is that accurate? Do amplified antennas really work better,

Re: [AFMUG] Dear WISPA...

SM to AP probably wouldn't work too well with 430/450, since the AP hardware is completely different (well, with one or two exceptions). But anyway, yes, they most likely would sue you to at least get that info taken down. But posting information on how to hack a radio to do something it's not

Re: [AFMUG] Low Temperature AC

google coolbot On Wed, Aug 15, 2018 at 12:28 PM, wrote: > Be aware that some of these units will not come back online after a power > outage without using the remote. Learned that lesson the hard way. > Cobbled together a remote control button pusher on a timer. What a bunch > of crap. > >

Re: [AFMUG] [WISPA Members] Dear WISPA...

Yeah... it's not like you can just go download Openwrt, modify it as much as you want, without doing anything that even vaguely looks like hacking, and flash it on the things... On Wed, Aug 15, 2018 at 4:49 PM Seth Mattinen wrote: > On 8/15/18 14:39, Mike Hammett wrote: > >

Re: [AFMUG] [WISPA Members] Dear WISPA...

https://www.denx.de/wiki/U-Boot - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: ch...@wbmfg.com To: "AnimalFarm Microwave Users Group" Sent: Wednesday, August 15, 2018 1:35:47 PM Subject: Re:

Re: [AFMUG] [WISPA Members] Dear WISPA...

Are you on the payroll? - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Jeremy" To: "AnimalFarm Microwave Users Group" Sent: Wednesday, August 15, 2018 6:26:32 AM Subject: Re: [AFMUG] [WISPA

Re: [AFMUG] Low Temperature AC

What about doing something to the outside ducts to allow outside air below 40deg to be pulled to inside for cooling and not use compressor at all. We have this setup for our data room and saves tons on power consumption. On 08/15/2018 10:14 AM, ch...@wbmfg.com wrote: Ah, yes, that’s it,

Re: [AFMUG] Low Temperature AC

On 8/15/18 09:59, Nate Burke wrote: Unfortunately I don't have a good way to get outdoor ducts to the location.  The Building HVAC has this setup, but when it's cold, they don't pull in outdoor air so it just recycles the already hot indoor air.  That's why I need extra cooling.  The Building

Re: [AFMUG] [WISPA Members] Dear WISPA...

Chuck, Thank you for your response and thank you for the board looking into the matter. Yes an ultimatum is an extreme position but I didn't start this, Ubiquiti did. This is an extremely serious matter for all the members so i decided to scream loudly and publicly, i'm not a politician, just a

[AFMUG] anyone have a source for tongyu antennas

Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ 85040 602-426-0542 r...@triadwireless.net www.triadwireless.net "Yesterdays Home Runs don't win todays games!" -- AF mailing list AF@af.afmug.com

Re: [AFMUG] Dear WISPA...

I suspect Cambium wouldn't care a whole lot at this point, since that hardware is all pretty much obsolete. If you did something like turning a PMP450 SM into a PTP450, then you might get a lawsuit. On Wed, Aug 15, 2018 at 1:46 PM Jeremy wrote: > It survived a reboot with one more minor change,

Re: [AFMUG] [WISPA Members] Dear WISPA...

Read the licensing agreement on both provider's radios. You will find that UBNT we're well within their right to sue, and I am honestly surprised that it did not happen sooner. The attitude of 'I own it, and can do what I want with it', doesn't hold up according to both of their licensing

Re: [AFMUG] Dear WISPA...

It survived a reboot with one more minor change, and a little bird told me that it was possible on v11 as well. I wonder, if I show you all how to do it simply with a JTAG if I'd get a lawsuit. I would bet you money that the lawsuit would hit very swiftly. Perhaps I am wrong. Cambium, do you

Re: [AFMUG] [WISPA Members] Dear WISPA...

On 8/15/18 04:26, Jeremy wrote: This issue is pretty cut and dry, and UBNT are well within their rights on this, and will almost certainly prevail in this lawsuit. Everyone should hope they don't prevail. There's a lot more to lose if such a precedent is established as to who really owns

Re: [AFMUG] GPS Sync loss on multiple sources at one tower

GPS is at 1575.42 MHz and 1227.60 MHz https://en.wikipedia.org/wiki/GPS_signals if it started after a storm the someone's transmitter might have been hit and is now causing interference, or there could be water in some cables. -sean On Tue, Aug 14, 2018 at 11:41 AM, Justin Marshal wrote: >

Re: [AFMUG] [WISPA Members] Dear WISPA...

I have another take. This license agreement was created before the recent Supreme Court ruling on things like this. I believe the new ruling lets us do whatever we want with the hardware. However if they are still using UBNT boot loaders or other software elements, then I would agree that

Re: [AFMUG] Low Temperature AC

Mitsubishi is definitely the leader in that space. I would suggest contacting them and getting the name of a dealer they suggest using. On Wed, Aug 15, 2018 at 1:43 PM Jason McKemie < j.mcke...@veloxinetbroadband.com> wrote: > You could just connect a draft beer cooling system to a radiator with

Re: [AFMUG] Low Temperature AC

You could just connect a draft beer cooling system to a radiator with a fan. I'm partially joking, but only partially. On Wednesday, August 15, 2018, Seth Mattinen wrote: > On 8/15/18 09:59, Nate Burke wrote: > >> Unfortunately I don't have a good way to get outdoor ducts to the >> location.

Re: [AFMUG] Low Temperature AC

Unfortunately I don't have a good way to get outdoor ducts to the location. The Building HVAC has this setup, but when it's cold, they don't pull in outdoor air so it just recycles the already hot indoor air. That's why I need extra cooling. The Building HVAC mostly handles it fine over the

Re: [AFMUG] Dear WISPA...

On 8/15/18 04:41, Jeremy wrote: It survived a reboot with one more minor change, and a little bird told me that it was possible on v11 as well.  I wonder, if I show you all how to do it simply with a JTAG if I'd get a lawsuit.  I would bet you money that the lawsuit would hit very swiftly. 

Re: [AFMUG] Dear WISPA...

That is an Easter Egg. -Original Message- From: Seth Mattinen Sent: Wednesday, August 15, 2018 12:58 PM To: af@af.afmug.com Subject: Re: [AFMUG] Dear WISPA... On 8/15/18 04:41, Jeremy wrote: It survived a reboot with one more minor change, and a little bird told me that it was

Re: [AFMUG] Low Temperature AC

Be aware that some of these units will not come back online after a power outage without using the remote. Learned that lesson the hard way. Cobbled together a remote control button pusher on a timer. What a bunch of crap. From: Lewis Bergman Sent: Wednesday, August 15, 2018 1:23 PM To:

Re: [AFMUG] [WISPA Members] Dear WISPA...

If ubiquiti want to go after cambium for copyright infringement then by all means go for it. But don’t drag Blip into conspiracy charges. It would seem WISPA could be a co-conspirator too On Wed, Aug 15, 2018 at 5:41 PM Mark Radabaugh wrote: > That’s where I’m curious about the copyright and

Re: [AFMUG] Indoor HDTV Antenna

Antennaweb.org will tell you what you need to know Sent from my iPad > On Aug 15, 2018, at 7:15 PM, Sean Heskett wrote: > > can you mount one outside? > > if it has to be an indoor one get as large of one as possible. > > bigger=better indoor or outdoor > > > >> On Wed, Aug 15, 2018 at

Re: [AFMUG] [WISPA Members] Dear WISPA...

> On Aug 15, 2018, at 7:51 PM, Seth Mattinen wrote: > > On 8/15/18 16:40, Mark Radabaugh wrote: >> That’s where I’m curious about the copyright and hacking claims. The >> loaders and many of the tools are open source and/or are supplied by the >> chipset manufacturer. > > > All of this

Re: [AFMUG] [WISPA Members] Dear WISPA...

That’s where I’m curious about the copyright and hacking claims. The loaders and many of the tools are open source and/or are supplied by the chipset manufacturer. Mark > On Aug 15, 2018, at 5:52 PM, Mathew Howard wrote: > > Yeah... it's not like you can just go download Openwrt, modify

Re: [AFMUG] Indoor HDTV Antenna

Rabbit ears are not UHF and most HDTV are UHF. The thing you show in the picture has a loop antenna in the middle. If it only has one cable coming out they are combining the two. Best to get an outdoor UHF antenna. 4 bay bow tie works pretty well for HDTV. Make sure not to use twin lead.

[AFMUG] Cambium Firmware Release Notices?

Is there a meaningful way to get alerts about Cambium firmware releases without having to check their download section daily? Thank you - Chris -- AF mailing list AF@af.afmug.com http://af.afmug.com/mailman/listinfo/af_af.afmug.com

Re: [AFMUG] Cambium Firmware Release Notices?

Not that I’ve found but it’d be nice if they had a list you could subscribe to. I just check their site every now and then or wait for someone else to post about it. -sean On Wed, Aug 15, 2018 at 8:02 PM Christopher Gray wrote: > Is there a meaningful way to get alerts about Cambium firmware

Re: [AFMUG] Indoor HDTV Antenna

can you mount one outside? if it has to be an indoor one get as large of one as possible. bigger=better indoor or outdoor On Wed, Aug 15, 2018 at 4:51 PM, Nate Burke wrote: > I'm looking to get an indoor HDTV Antenna. Any better or worse than > others? Chicago Transmitters are about 35

Re: [AFMUG] Indoor HDTV Antenna

If that’s an amplified antenna that might be the problem. When channels went to digital, something about my old amplifier was not compatible. I bypassed the amplifier, then my outdoor antenna worked great again. I also had a Radio Shack indoor antenna just like that but couldn’t get