Re: [AFMUG] While replacing equipment

Sorry. . phone is not cool...Tardis Jaime Solorza On Jul 26, 2017 9:24 PM, "Jaime Solorza" wrote: > Nope. Couldn't find a nearby Tartis > > Jaime Solorza > > On Jul 26, 2017 9:17 PM, "Josh Luthman" > wrote: > >> Did you try it? >> >>

Re: [AFMUG] While replacing equipment

Nope. Couldn't find a nearby Tartis Jaime Solorza On Jul 26, 2017 9:17 PM, "Josh Luthman" wrote: > Did you try it? > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct: 937-552-2343 <(937)%20552-2343> > 1100 Wayne St > Suite 1337 > Troy, OH 45373 >

Re: [AFMUG] While replacing equipment

Did you try it? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Jul 26, 2017 11:15 PM, "Jaime Solorza" wrote: > Today we worked replacing and upgrading radios and PLCs at several lift > stations in Fabens, Texas, when

Re: [AFMUG] Managed WiFi question

We have been demoing SmartRG's device manager. We do both xDSL and fixed wireless, SmartRG has a nice xDSL modem/router we've been using for awhile. They have an ethernet model that could work with fixed wireless, fiber, etc. http://www.smartrg.com/hardware Their Device Manager is a TR-069

Re: [AFMUG] Choice on Power Panels at new install

Is there such a thing as a “recent” R56? I did not realize someone was updating that document. From: Paul McCall Sent: Wednesday, July 26, 2017 2:28 PM To: af@afmug.com Subject: Re: [AFMUG] Choice on Power Panels at new install Sure….. From: Af [mailto:af-boun...@afmug.com] On Behalf Of

Re: [AFMUG] Explosion Proof Access Point

These are some used at Western Refinery...I have no experience with them. Friend of mine works there...two way radios are intrinsic safe Motorola brand...

Re: [AFMUG] Explosion Proof Access Point

Correct the complete "assembly" must adhere to standard. You can find white papers and standards on ISA.org Jaime Solorza On Jul 26, 2017 2:18 PM, "Lewis Bergman" wrote: > If it is certified IS in that config then yes. > > On Wed, Jul 26, 2017 at 3:15 PM

Re: [AFMUG] Accedian

It IS possible but it requires special software to reprogram the FPGA and then load different firmware. I don't think it's likely they will let you do it, but it's worth a shot. If you'd like I can have someone reach out. On Jul 26, 2017 7:47 PM, "Gino A. Villarini" wrote:

Re: [AFMUG] Accedian

Can I flash my performant hw to acceding NIDS or should I just send them to the recycler? From: Af > on behalf of Josh Reynolds > Reply-To: "af@afmug.com"

Re: [AFMUG] Exchange Migration Consultant

Tks From: Af > on behalf of Justin Wilson > Reply-To: "af@afmug.com" > Date: Wednesday, July 26, 2017 at 3:46 PM To: "af@afmug.com"

Re: [AFMUG] Managed Home Security

Careful on state regulations on security systems. In Michigan, we can do security cameras but cannot do anything having to do with a burglar/security alarm system unless we are licensed by the state, and it's a fairly arduous process to get that license. On Wed, Jul 26, 2017 at 7:30 PM, Jeremy

Re: [AFMUG] Managed Home Security

Same backend as Vivint AFAIK On Wed, Jul 26, 2017 at 5:29 PM, Jeremy wrote: > I believe that you can resell through alarm.com as well, after you get > certified. We are using the service through a third party. They have it > branded, and have a remote app and

Re: [AFMUG] Managed Home Security

I believe that you can resell through alarm.com as well, after you get certified. We are using the service through a third party. They have it branded, and have a remote app and everything. It works well. On Wed, Jul 26, 2017 at 2:32 PM, Harold Bledsoe wrote: > Funny

Re: [AFMUG] EPMP1000 GPS Antenna Issues

I graph/poll the SNMP sync stat. There's one AP that gives me some hassle but all of the other ones are just fine. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 26, 2017 at 3:41 PM, Steve Jones wrote: >

Re: [AFMUG] EPMP1000 GPS Antenna Issues

I do review logs.. and I don't have any issues. On Wed, Jul 26, 2017 at 3:41 PM, Steve Jones wrote: > review your AP logs, you might be suprised > > On Wed, Jul 26, 2017 at 2:11 PM, Josh Baird wrote: > >> GPS pucks are perfectly reliable for us.

Re: [AFMUG] EPMP1000 GPS Antenna Issues

*nods* Never a problem. - Mike Hammett Intelligent Computing Solutions Midwest Internet Exchange The Brothers WISP - Original Message - From: "Josh Baird" To: af@afmug.com Sent: Wednesday, July 26, 2017 2:11:47 PM Subject: Re: [AFMUG] EPMP1000

Re: [AFMUG] Managed WiFi question

> I'm surprised at how few people want access to change anything. Is that because they don't want a personal SSID/passcode, guest network, etc.? Or is it because they are terrified of a typical enterprise management config interface? On Wed, Jul 26, 2017 at 1:20 PM Christopher Gray

Re: [AFMUG] Managed Home Security

Funny you mention that. We also see that as a gap and good revenue opportunity. http://na.smc.com/site/wp-content/uploads/2017/05/SMC_IgniteNet_Tech_Brief-v1.0.pdf The Secure Watch service is only available sold through operators so hit me offlist if you want more details. The high level is

Re: [AFMUG] Choice on Power Panels at new install

Sure….. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Lewis Bergman Sent: Wednesday, July 26, 2017 4:11 PM To: af@afmug.com Subject: Re: [AFMUG] Choice on Power Panels at new install I can probably post a recent R56 on a download site if you want it. On Wed, Jul 26, 2017 at 3:05 PM Paul

Re: [AFMUG] Accedian

A few, used to work for them. What's up? On Jul 26, 2017 3:14 PM, "Gino A. Villarini" wrote: > Anyone has a contact in Accedian? > > > > *Gino A. Villarini* > President > Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 > >

Re: [AFMUG] Explosion Proof Access Point

If it is certified IS in that config then yes. On Wed, Jul 26, 2017 at 3:15 PM can...@believewireless.net < p...@believewireless.net> wrote: > ​Would mounting the AP outside and then running coax in to antennas be > acceptable in this situation?​ > > On Wed, Jul 26, 2017 at 4:02 PM, Lewis

Re: [AFMUG] Explosion Proof Access Point

​Would mounting the AP outside and then running coax in to antennas be acceptable in this situation?​ On Wed, Jul 26, 2017 at 4:02 PM, Lewis Bergman wrote: > Could be IS/HAZLOC locations like gas plants or refineries. We deal with a > bunch of those and they have IS

[AFMUG] Accedian

Anyone has a contact in Accedian? Gino A. Villarini President Metro Office Park #18 Suite 304 Guaynabo, Puerto Rico 00968 [cid:aeronet-logo_310cfc3e-6691-4f69-bd49-b37b834b9238.png]

Re: [AFMUG] Choice on Power Panels at new install

I can probably post a recent R56 on a download site if you want it. On Wed, Jul 26, 2017 at 3:05 PM Paul McCall wrote: > Lewis, > > > > I am going to try your recommendation on some of the towers that I own. > > > > Paul > > > > *From:* Af [mailto:af-boun...@afmug.com] *On

Re: [AFMUG] Choice on Power Panels at new install

Lewis, I am going to try your recommendation on some of the towers that I own. Paul From: Af [mailto:af-boun...@afmug.com] On Behalf Of Lewis Bergman Sent: Wednesday, July 26, 2017 4:04 PM To: af@afmug.com Subject: Re: [AFMUG] Choice on Power Panels at new install I like putting a panel

Re: [AFMUG] Choice on Power Panels at new install

I like putting a panel protector in. It doesn't hep in a very near strike but it does with the incoming stuff off the grid. On Wed, Jul 26, 2017 at 3:02 PM Paul McCall wrote: > Yep, we run 10 gauge out the 200ft. our own breaker, plenty of room in > the panel. We beef up the

Re: [AFMUG] Explosion Proof Access Point

Could be IS/HAZLOC locations like gas plants or refineries. We deal with a bunch of those and they have IS tablets they use to keep track of work orders and lockouts and such. Most still use paper tickets though. On Wed, Jul 26, 2017 at 2:57 PM can...@believewireless.net <

Re: [AFMUG] Choice on Power Panels at new install

Yep, we run 10 gauge out the 200ft. our own breaker, plenty of room in the panel. We beef up the ground in the service panel that feeds us < 5ohm, and often install a panel protector there as well as next to the tower panel. From: Af [mailto:af-boun...@afmug.com] On Behalf Of Lewis Bergman

Re: [AFMUG] Explosion Proof Access Point

Customer requested it. But I'm guessing phones, tablets or laptops. On Wed, Jul 26, 2017 at 2:12 PM, George Skorup wrote: > I'm confused. What's the application? We've done outdoor wifi solutions at > gas stations before, but not near the pumps. > > On 7/26/2017 1:00

Re: [AFMUG] 900 filter

I don't believe all of them had them in them it was something that you could order as an option Sent from my iPhone > On Jul 26, 2017, at 14:42, Steve Jones wrote: > > the integrated 900 fsk APs had them in there too > >> On Wed, Jul 26, 2017 at 2:11 PM, George

Re: [AFMUG] Exchange Migration Consultant

Talk to Scott and Mark from On-Ramp. Very versed in office 365 and exchange. Justin Wilson j...@mtin.net www.mtin.net www.midwest-ix.com > On Jul 26, 2017, at 3:40 PM, Steve Jones wrote: > > we used progent a few times for that, flawless > > On Wed, Jul 26, 2017

Re: [AFMUG] 900 filter

the integrated 900 fsk APs had them in there too On Wed, Jul 26, 2017 at 2:11 PM, George Skorup wrote: > I have two DCI rack-mount 900 filters from the WaveRider days. I think one > is tuned for 911.2 and the other at 918.4. DCI can re-tune them for a > nominal fee.

Re: [AFMUG] EPMP1000 GPS Antenna Issues

review your AP logs, you might be suprised On Wed, Jul 26, 2017 at 2:11 PM, Josh Baird wrote: > GPS pucks are perfectly reliable for us. > > On Wed, Jul 26, 2017 at 3:07 PM, Steve Jones > wrote: > >> packetflux is the only way to sync, everything

Re: [AFMUG] Exchange Migration Consultant

we used progent a few times for that, flawless On Wed, Jul 26, 2017 at 2:23 PM, Gino A. Villarini wrote: > Hey > > We are looking into migrating our Exchange Server to Exchange 365, > although we have the in-house tech guys to attack this feast, we prefer to > outsource it

[AFMUG] Exchange Migration Consultant

Hey We are looking into migrating our Exchange Server to Exchange 365, although we have the in-house tech guys to attack this feast, we prefer to outsource it and focus on all our tasks on hand. Any recommendations? Gino A. Villarini President Metro Office Park #18 Suite 304 Guaynabo,

Re: [AFMUG] Ubiquiti NFC-NVR over VPN

Ports opened/firewall? The cameras have telnet still to verify. Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 26, 2017 at 3:02 PM, Mike Gawlowski wrote: > We have a central site with the NVR that tunnels out

Re: [AFMUG] EPMP1000 GPS Antenna Issues

GPS pucks are perfectly reliable for us. On Wed, Jul 26, 2017 at 3:07 PM, Steve Jones wrote: > packetflux is the only way to sync, everything else is garbage, GPS pucks > aren't reliable, CTMs and CMMs are a waste of money and are no where near > as versatile, cambium

Re: [AFMUG] 900 filter

I have two DCI rack-mount 900 filters from the WaveRider days. I think one is tuned for 911.2 and the other at 918.4. DCI can re-tune them for a nominal fee. These used to be on 1-7/8" heliax to 460 feet. Ah, the good ol days. OK, not so good. On 7/26/2017 1:57 PM, Craig House wrote:

Re: [AFMUG] EPMP1000 GPS Antenna Issues

12-port DIN mount, 12-port DIN mount! On 7/26/2017 2:07 PM, Steve Jones wrote: packetflux is the only way to sync, everything else is garbage, GPS pucks aren't reliable, CTMs and CMMs are a waste of money and are no where near as versatile, cambium cant get their pucks to work, so I wouldn't

Re: [AFMUG] EPMP1000 GPS Antenna Issues

packetflux is the only way to sync, everything else is garbage, GPS pucks aren't reliable, CTMs and CMMs are a waste of money and are no where near as versatile, cambium cant get their pucks to work, so I wouldn't trust their little syncpipe knockoffs either. Ala-cart sync, switch agnostic, no

[AFMUG] Ubiquiti NFC-NVR over VPN

We have a central site with the NVR that tunnels out to three remote sites with Unifi cameras. For some reason, the cameras say "not connected" when I input the IP of the remote NVR. I verified that the remote networks can ping the NVR so this doesn't seem like a networking issue. Anybody

[AFMUG] 900 filter

Somebody posted either on this list the other day or Facebook group that they were looking for a 900 MHz filter. I was cleaning out one of our warehouses today and found four of them if that person is on this list and still interested please feel free to shoot me a message Sent from my iPhone

Re: [AFMUG] EPMP1000 GPS Antenna Issues

It's not only the antenna. Newer 1000 boards and all 2k's have a GPS+GLONASS receiver. They also updated the 450AP a couple years ago with a revision that includes this receiver. GPS-only kinda always sucked. With GLONASS added, you have a lot more sats available, so the probability of

Re: [AFMUG] EPMP1000 GPS Antenna Issues

Screw that. Rack Injector baby!!! Josh Luthman Office: 937-552-2340 <(937)%20552-2340> Direct: 937-552-2343 <(937)%20552-2343> 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 26, 2017 at 2:45 PM, Steve Jones wrote: > we wholey gave up on them, its known to be

Re: [AFMUG] EPMP1000 GPS Antenna Issues

we wholey gave up on them, its known to be an issue, everytime you reach out to cambium support, the treat you like we treat our customers (have you restarted your computer?) F that, they know the cause, just don't want to tell us. buy a hundred dollar site monitor and a 150 dollar syncinjector

Re: [AFMUG] EPMP1000 GPS Antenna Issues

They're both 1200-1600 MHz (ish) so I wonder if there is something fancy to them? Didn't get the cord get a lot longer? Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Wed, Jul 26, 2017 at 2:31 PM, Nate Burke wrote: > When

[AFMUG] EPMP1000 GPS Antenna Issues

When we first started using EPMP, (5ghz, with GPS) we had some AP's would keep losing satellites. Then after our first couple installs, everything just Worked after that. Slap the GPS antenna on any random surface, and lots-o-satellites with no issues. Now the New AP's we're getting out of

Re: [AFMUG] Managed WiFi question

We've been demoing Calix ConsumerConnect+ and GigaCenter routers. It's not bad, especially on the fiber side. Might need a cost analysis for a typical WISP though. On 7/26/2017 12:20 PM, Christopher Gray wrote: To reply to the original question: We use a few options: *Cambium R200

Re: [AFMUG] Explosion Proof Access Point

I'm confused. What's the application? We've done outdoor wifi solutions at gas stations before, but not near the pumps. On 7/26/2017 1:00 PM, can...@believewireless.net wrote: It is for WiFi. On Wed, Jul 26, 2017 at 1:58 PM, George Skorup

Re: [AFMUG] Explosion Proof Access Point

It is for WiFi. On Wed, Jul 26, 2017 at 1:58 PM, George Skorup wrote: > Yeah, there's the ATEX/HAZLOC certified versions of the 5GHz 450i stuff. > Unless he was asking about wifi, but I don't think you'd be using mobile > devices/laptops at fuel stations, or shouldn't

Re: [AFMUG] Explosion Proof Access Point

Yeah, there's the ATEX/HAZLOC certified versions of the 5GHz 450i stuff. Unless he was asking about wifi, but I don't think you'd be using mobile devices/laptops at fuel stations, or shouldn't be. On 7/26/2017 12:42 PM, Sean Heskett wrote: canopy 450i On Wed, Jul 26, 2017 at 8:24 AM,

Re: [AFMUG] Explosion Proof Access Point

canopy 450i On Wed, Jul 26, 2017 at 8:24 AM, can...@believewireless.net < p...@believewireless.net> wrote: > Looking for an explosion proof access point for a natural gas fueling > station. Any recommendations? >

Re: [AFMUG] Managed WiFi question

To reply to the original question: We use a few options: *Cambium R200 provisioned by cnMaestro (leased for $9-$12 per device depending on area) *UniFi USG / UAP provisioned by off-site UniFi Controller (purchased outright then managed for $5 + $5 per device) *Mimosa G2 no remote provisioning,

Re: [AFMUG] Choice on Power Panels at new install

Not if there is sufficient line gauge to support the load and there is room in the panel. On Wed, Jul 26, 2017 at 11:58 AM Paul McCall wrote: > That’s what I was thinking, but I wanted others opinions. > > > >  > > > > *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of

[AFMUG] Managed Home Security

Dovetailing with the managed WiFi thread, and since the market is receptive to value-added services like VOIP and WiFi. what's anyone doing for managed home security systems, cameras, etc.? I've looked at Novi and wasn't impressed with their offerings. I love the UBNT cameras, but there's no

Re: [AFMUG] OT: Linkedin

Haha, and this. Unless of course you need software development and mobile app programmers in which case you don’t need to find them, they will find you. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Steve Jones Sent: Wednesday, July 26, 2017 9:58 AM To: af@afmug.com Subject: Re:

Re: [AFMUG] Choice on Power Panels at new install

That’s what I was thinking, but I wanted others opinions.  From: Af [mailto:af-boun...@afmug.com] On Behalf Of Steve Jones Sent: Wednesday, July 26, 2017 12:57 PM To: af@afmug.com Subject: Re: [AFMUG] Choice on Power Panels at new install Less points of failure at the main, one less breaker,

Re: [AFMUG] OT: Linkedin

and congratulations from random IT guys in india for your work milestones. On Wed, Jul 26, 2017 at 11:43 AM, Josh Reynolds wrote: > This. > > On Jul 26, 2017 11:36 AM, "Rory Conaway" wrote: > >> Wait for all the offers to join Boards of Directors

Re: [AFMUG] Choice on Power Panels at new install

Less points of failure at the main, one less breaker, one less spot for some random dude to shut something off. 50 foot isn't all that far unless we are talking about boring through 50 foot of concrete, bonding your ground to the main rather than the sub panel means less chance of you shunting for

Re: [AFMUG] OT: Linkedin

This. On Jul 26, 2017 11:36 AM, "Rory Conaway" wrote: > Wait for all the offers to join Boards of Directors from the companies > that couldn't grow without your input. > > Rory > > -Original Message- > From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jay

Re: [AFMUG] OT: Linkedin

Wait for all the offers to join Boards of Directors from the companies that couldn't grow without your input. Rory -Original Message- From: Af [mailto:af-boun...@afmug.com] On Behalf Of Jay Weekley Sent: Wednesday, July 26, 2017 9:02 AM To: af@afmug.com Subject: Re: [AFMUG] OT: Linkedin

Re: [AFMUG] OT: Linkedin

So, I'm mostly setup now except for my glamour shot. What do I do now? Chuck McCown wrote: Sure, it is a good place to put your best face on things. You can do as much or little of a life history/resume as you want. To me it is like a nice rolodex of business contacts that updates itself.

[AFMUG] Choice on Power Panels at new install

Electrical opinions wanted. On a new tower, the main panel is 200ft. away and a harder run to get to (but doable). There is a subpanel in a barn 150ft. away. Often we go to the easiest place, but am taking a step back at all this kind of stuff (you can tell by my other threads). Regardless,

Re: [AFMUG] DVB traffic over wireless

So it does need to be converted. Thanks. Rory From: Af [mailto:af-boun...@afmug.com] On Behalf Of Adair Winter Sent: Wednesday, July 26, 2017 8:27 AM To: af@afmug.com Subject: Re: [AFMUG] DVB traffic over wireless We put in a siklu 60ghz link for a TV station who transports their dvb stream

Re: [AFMUG] DVB traffic over wireless

We put in a siklu 60ghz link for a TV station who transports their dvb stream over it. Just need the right sdi boxes on both ends. On Jul 26, 2017 10:25 AM, "Rory Conaway" wrote: > Someone asked me if we could carry DVB or DVB-T traffic over wireless. Is > that standard

[AFMUG] DVB traffic over wireless

Someone asked me if we could carry DVB or DVB-T traffic over wireless. Is that standard IP traffic that can be carried over Layer 2 or is it something that can be converted at the head end and translated at the client side? Rory Conaway * Triad Wireless * CEO 4226 S. 37th Street * Phoenix * AZ

Re: [AFMUG] Explosion Proof Access Point

Moxa has an IP68 rating I believe. On Wed, Jul 26, 2017 at 9:24 AM, can...@believewireless.net < p...@believewireless.net> wrote: > Looking for an explosion proof access point for a natural gas fueling > station. Any recommendations? >

Re: [AFMUG] WISPAPALOOZA2017 and other misc chat

Or you just use the native app which supports multiple Slack groups. On Wed, Jul 26, 2017 at 10:34 AM, Josh Luthman wrote: > So if you're in say Powercode and WISP slack, you need two tabs... > > > Josh Luthman > Office: 937-552-2340 <(937)%20552-2340> > Direct:

Re: [AFMUG] WISPAPALOOZA2017 and other misc chat

So if you're in say Powercode and WISP slack, you need two tabs... Josh Luthman Office: 937-552-2340 Direct: 937-552-2343 1100 Wayne St Suite 1337 Troy, OH 45373 On Tue, Jul 25, 2017 at 7:31 PM, Jeremy wrote: > I also thought it was cool that it recognized that I had

Re: [AFMUG] Managed WiFi question

We do it using Cloud based mngmt platforms: We offer Cambium Pilot 201 Router and Xclaim X2’s for $9.95 Meraki MR 33 and up starting from $19.95 up to $39.95 We charge a setup and install fee that goes from $49.95 to $99.95 depending on the contract term. We include: Cable drop, config, FW

Re: [AFMUG] Explosion Proof Access Point

Look for intrinsic radios...Moxa is on source Jaime Solorza On Jul 26, 2017 8:24 AM, "can...@believewireless.net" < p...@believewireless.net> wrote: > Looking for an explosion proof access point for a natural gas fueling > station. Any recommendations? >

[AFMUG] Explosion Proof Access Point

Looking for an explosion proof access point for a natural gas fueling station. Any recommendations?

[AFMUG] Who's your favorite small business customer?

We just completed a case study sharing Skywerx' (Colorado WISP) customer Pagosa Springs Animal Shelter. This story builds awareness of the animal shelter and Skywerx as an operator - and it cost nothing to either of them.