Check this out
//But this and fails for input such as: 101 ie all nos
must be unique..
int search_element_in_rotated_array(int *a, int low, int high, int
key)
{
while(low = high)
{
int mid = low + (high - low)/2;
if(a[mid] == key)
return
Hi Ali,
You can take a look at the datapathmem component. I suspect that does
most of what you want.
Regards
KK
On 10 August 2011 02:10, ali ahmad aliahmad...@hotmail.com wrote:
Can u please tell me how to do coding for this because i am new to this .If
not possible that than please do give
There is also the small roof turbine:
http://youtu.be/nWsVl1t5NQ0
Now, I'd like to put one of these on top and see how my smoke flows
through it.
Problems with these?
The bearings are cheap and freeze up.
They also make a lot of noise all night keeping you awake.
SoI'm still into an active
You at Escapees in Lakewood? Swing on up and see the frame in Roswell.
Easy drive.
This (+foam boards):
http://youtu.be/2tZGLaLeqYc
Equals (big version of this):
http://youtu.be/bJXd71ZaWls
If you can't stand on top of it, you don't want it:
http://youtu.be/k0JNJPwY2Ic
Watch the videos.
On
Go through the last 50-100 posts... a lot of Qs have already been
posted!!
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
Just listening for datapath_join_event. NOX send
OFPT_FEATURES_REQUEST when a switch connects and the
OFPT_FEATURES_REPLY is contained in the datapath_join_event.
Regards
KK
On 9 August 2011 09:38, ali ahmad aliahmad...@hotmail.com wrote:
Hy!
I want to know, what's the procedure to send
Ok...part 2 of the video test is up.
http://youtu.be/bJXd71ZaWls
Foam board covering. Model on ground.
Outside Temp - 100 deg. F
Windspeed - 7mph
Sun Intensity - Off the chart!
Same result. No difference. No reverse air flow downwards.
So, if you are one of the wee people living in a tiny
3
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
algogeeks+unsubscr...@googlegroups.com.
For more options, visit this group at
Codechef Ques(Initiative of Directi)
use DFS, BFS or Floyd Warshall... :)
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
@Harshal: Thanx
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
algogeeks+unsubscr...@googlegroups.com.
For more options, visit
Hey Congrats!! :)
I got intern dere :)
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
algogeeks+unsubscr...@googlegroups.com.
For
.
The cheapest stuff had some almost deliberate marketing bullshit going
on.
I think some of it related to the wateproofness. I'd avoid it (it's
$80/5gal?)
On Aug 3, 4:04 pm, ken winston caine
k...@mindbodyspiritjournal.com wrote:
KK, I just looked at the listing you posted for Henry's white
For $1,000 it should wipe your butt also.
But I do like the cut out to clean your privates.
KK
--- On Thu, 8/4/11, Greg mongrelti...@gmail.com wrote:
From: Greg mongrelti...@gmail.com
Subject: [QUAD-L] shower commode chair review - funny
To: quad-list@eskimo.com
Date: Thursday, August 4, 2011
In Gingerbread Settings-Applications-MyApplications, the Running tab
has been divided into two. Running Services and Cached Background
Process. So how and when does Android decide to cache a process?
Mainly is there anything my app can do to tell the system to never
cache my process?
Thanks
KK
The white board is crumbly, especially the cheap foil coated stuff
that HD sells right now.
It's hateful to work with.
Blue and pink boards do have some of the disadvantages Vinay
mentioned.
But, they are far superior at rejecting moisture. Dow themselves has a
paper on it.
I need to find it
They use silicone in the production process somewhere. This means
there might be silicone residue on the outside of the panels. This is
why tape won't stick to blue and pink boards.
On Aug 3, 10:50 am, KK koffeekomma...@gmail.com wrote:
I'd like to see actual outgas hard data for the pink
Outgassing info on pink/blue foam boards:
http://www.sumidacrossing.org/SumidaCrossing/MaterialSafety.html
The typical “insulation” foam panels, including Owens-Corning’s pink
Foamular brand, are Extruded Polystyrene (XPS), which is basically gas
bubbles trapped in foamed plastic which has been
Ok, in looking at the outgassing of polystyrene (pink/blue board), I
came across this stuff.
The outgassing hazard might not actually exist in the way commonly
stated.
Surfboard makers, signmakers, and aircraft builders have spread a
myth of outgassing.
It's actually delamination of their
, was a group activity of his that he
sponsored -- mainly on college campuses.
Best,
ken
- Original Message -
From: KK koffeekomma...@gmail.com
To: hexayurt hexayurt@googlegroups.com
Sent: Sunday, July 31, 2011 8:17 PM
Subject: [hexayurt] Video test of Buckminster Fuller's
Not gonna happen. These conditions probably cannot be met in real
life anywhere.
The proof would have been in documentation. If he did any at all.
His only personal mention of this cooling (available on the net and
book form) is rife with silly talk.
Laurie pointed this out.
There would need to
Make it happen Cap'n!
I gladly pass the torch to *you*
Let us know how you make out! Cheers ;)
On Aug 1, 9:34 am, Max Turunen maxturu...@gmail.com wrote:
I'm not convinced yet... needs more testing.
--
You received this message because you are subscribed to the Google Groups
hexayurt
I tested the Buckminster Fuller cooling effect and made a video of the
results
http://youtu.be/BRAM-uWB3fs
Unless more actual proof is forthcoming from Buckminster Fuller's
archived documents or business records.
My hexagon structure under a light breeze pulled the smoke up the tube
with a
bool foo(int x)
// Implement this function where 0 = x = 100
It should return true x% of times n false otherwise
first i told him to have a static int s then increment it each time
the func is called...
and if s % (100 - x ) == 0 then true else false.
then he told me to have some
@Nikhil: ya true but i dont know wht else was he expecting.
@sunny and Muthu: like suppose u pass 20 then func should return true
with 20% probabily and false otherwise...
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this
No i was not able to come up with a soln dere.. my bad :(
This was my 1st interview hope the upcoming interviews would be nice!!
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
@shady: if ur not interested dont post ur comment, but let others do
it..
@viswamath: WA
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send
@piyush:
even if r = di and c = dj then whats the prob??
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
that openflow does routing in
Layer 2. Is this a cause of destination IP does not change? Or am I missing
something?
Thank you very much for help.
Best Regards.
2011/7/21 kk yap yap...@stanford.edu
A tcpdump of the control traffic will be useful and easier.
Regards
KK
On 21 July 2011
www.spoj.pl/problems/SHOP
Its a pretty easy Q... But m not able to figure out any silly mistake
in my prog.. plzz help
#includeiostream
#includevector
#includemap
#includequeue
using namespace std;
char a[26][26];
int si, sj, di, dj, rows, cols;
void BFS(vector vectorint v, int si, int sj,
On Jul 22, 12:33 pm, ken winston caine
k...@mindbodyspiritjournal.com wrote:
I have the Endless Breeze, too. And like it as far as 12v box fans go.
Maybe I should pair it with its own solar panel so it's not drawing down my
house batteries.
Did find specs but did not find prices for the
National news this morning said New York was going to be the hottest place in
the states.
Houston TX area has been cool this last week with high temp in the lower 90's
KK
From: Bobbie Humphreys bobbie...@aol.com
To: quad-list@eskimo.com quad-list@eskimo.com
Is there a question in this email?
KK
2011/7/21 Min-Hyup KANG kang-min-h...@hanmail.net
Thank you for your response.
1. You need to include the header file for the definition of the event,
then create the event, populate it and post it.
-Basically, there is part of flow_route_event
Sorry, I continue to be lost.
if you want to send flows to ENVI, look at lavi_hostflow.cc line 34 to 60
for an example. Basically, a list of flow is created and the send_flow_list
function is called.
Regards
KK
2011/7/21 Min-Hyup KANG kang-min-h...@hanmail.net
Yes, sorry for not clearness
the answer is when there is a flow mod to the host. You can verify
by doing a grep to see which component post the event.
Hope this is useful.
Regards
KK
for example handle_req handling JSON event occur, when lavi receive json
message from envi.
- 원본 메일 -
*보낸사람*: kk yap yap
like it when you don't remember their
names.
KK
#yiv1258173291 #yiv1258173291avg_ls_inline_popup{padding:0px
0px;margin-left:0px;margin-top:0px;overflow:hidden;word-wrap:break-word;color:black;font-size:10px;text-align:left;line-height:130%;}
8 years ago, while I was still working, I was on 15. Since retiring I am now
on 7. Terrible to get old!
KK
#yiv1836069546 #yiv1836069546avg_ls_inline_popup{padding:0px
0px;margin-left:0px;margin-top:0px;overflow:hidden;word-wrap:break-word;color:black;font-size:10px;text-align:left;line
, the intermediate switch will consume the LLDP packet.
For discovery of only OpenFlow switches, it might be best to use a
packet with multicast address (and possibly ethertype) that is
different from LLDP (i.e., 802.11ab). The change is not hard but note
the consequences.
Just my two cents worth.
Regards
KK
Oops.. I read the GENI document again, and Murphy is right in that the
multicast address is different here. My apologies.
This address will be forwarded by mac bridges though. Won't this be
risking a broadcast storm? Am I missing something again?
Regards
KK
On 14 July 2011 13:23, kk yap yap
on wireless mesh, and therefore much more
knowledgeable in this topic than I am. I would let them comment
instead.
Regards
KK
On 14 July 2011 12:16, Alexey Bogaevskiy arbog...@gmail.com wrote:
Hi Aaron,
I am just trying to find out what is possible, before I start doing
something that can't be done
replies. Look at the
dump from packet 210 onwards. NOX is just saying Don't spam me! :P
The dpid is exactly the same on those feature replies. Bad HP?!?!
Regards
KK
On 14 July 2011 15:14, Aaron Rosen aro...@clemson.edu wrote:
Hi Srini,
I'm actually using destiny with last commit
Given that your trap and wifi subagents are running, I can only assume your
SNMP setup is ok. The most likely cause is a mismatch of OpenFlow setup and
the SNMP setup. If the version is correct, I am not sure what else is
wrong. Nikhil, can you think of anything else?
Regards
KK
On 11 July
what the setup is and what
traffic the client is sending.
Regards
KK
On 8 July 2011 09:27, man monaco glamourous...@yahoo.com wrote:
Hi KK,
I finally got this to work, thanks for the instructions. I basically
downloaded the noxcore+openroads+openflow git's to the PC Engine itself
Can u elaborate something on implementation.??
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
Hey anyone Pl help... its clearly written code and algo u know vry
well so it wont take much time :)
On Jul 5, 8:43 pm, KK kunalkapadi...@gmail.com wrote:
This is the solution to the MST problem
m getting WA again n again... cant figure out where's the mistake...
so plzzz help!!!https
for Q5 change the expr into postfix and then build expression tree...
but is expression tree same as parse tree??
correct me if i m wrong!!
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to
https://www.spoj.pl/problems/SHOP/
Anybody plzz post a solution to the above problem...
i tried with dp but it failed...
How to implement with DFS or if possible with DP???
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group,
This is the solution to the MST problem
m getting WA again n again... cant figure out where's the mistake...
so plzzz help!!!
https://www.spoj.pl/problems/BLINNET/
#includeiostream
#includestring
#includevector
#includelist
#includequeue
#define MAXINT (int)9e9
#define TR(a,it)
10. What does the following fragment of C-program print?
char c[] = GATE2011;
char *p =c;
printf(%s, p + p[3] - p[1]);
(A) GATE2011 (B) E2011 (C) 2011 (D) 011
Answer: - (C)
why is p[3] - p[1] returning 4
--
You received this message because you are subscribed to the Google Groups
got it dont bother!!!
anyway thanx abhijith!!!
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
3. Consider the following recurrence:
T(n) = 2T(n ^ (1/2)) + 1
Which one of the following is true?
(A) T(n) = (loglogn)
(B) T(n) = (logn)
(C) T(n) = (sqrt(n))
(D) T(n) = (n)
Can we solve this using master theorem???
any other way???
--
You received this message because you are subscribed to
Answer (B)
Let n = 2^m, T(n) = T(2^m)
Let T(2^m) = S(m)
From the above two, T(n) = S(m)
S(m) = 2S(m/2) + C1
Above expression is a binary tree traversal recursion whose time
complexity is (m). You can also prove using Master theorem.
S(m) = (m)
= (logn) /* Since n = 2^m */
Now, let
Hi Landy,
Can you checkout the of1.0-noxdestiny branch instead? The snmp_executor is
not needed anymore in that branch. There was some changes made to NOX and
therefore the changes were made when we transited from OpenFlow v0.8.9 to
v1.0.
Regards
KK
On 28 June 2011 13:02, man monaco
off to me at 512. The packet sent
is not conforming to the expectation.
Hope this helps.
Regards
KK
On 25 June 2011 13:26, Ricardo Bennesby ricardo.benne...@gmail.com wrote:
Hi. Thanks for reply, KK.
I am using the struct messenger_msg of messenger component:
struct messenger_msg
Hi Ricardo,
You might want to add a length and type in front of the string. :)
Regards
KK
On 18 June 2011 14:46, Ricardo Bennesby ricardo.benne...@gmail.com wrote:
Hi.
I am writing component in C++ that uses messenger component.
I have a client function that send a string to the own
but in a set elements are not in any order...and also set cannot be
indexed...
if u want to sort in the basis of key use vector with pair...
Correct me if m wrong
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send
@sunny:
This test:
if(! ( (countx == counto + 1) || (countx == counto) ) )
cout no endl;
prints no if countx counto
and this one
if(o x)
cout no endl;
else
cout yes endl;
prints no if both have won or else
@sunny: why the answer for the case u mentioned is no.. those are
possible set of moves according to me and hence my program outputs
yes
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to
To remove all digits left of the rightmost digit one in the binary
representation of some integer what we need to do is this:
ans = no -no
and this is what is exactly asked in this problem of SPOJ:
www.spoj.pl/problems/MZVRK/
#includeiostream
using namespace std;
int main()
{
unsigned long
oops !! :) i'll look into that.. thx
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
algogeeks+unsubscr...@googlegroups.com.
For
http://www.spoj.pl/problems/MINMOVE/
This code is showing TLE after some 20th test case what else can be
optimized???
try:
import psyco
psyco.full()
except ImportError:
pass
string = input()
minlen = string
length = len(string)
string += string[:]
#print(string)
index = 0
for i in
Hi Andrea,
Beyond the component class, there is nothing particular abstract about
the API of NOX IMHO. You might of course also be interested in the
OpenFlow messaging API. Is there anything beyond that? If not, then
the doxygen page of Component is what you are looking for?
Regards
KK
On 16
How can the execution time of python program be increased in
programming contest so that we dont get TLE for gud algos..
--
http://mail.python.org/mailman/listinfo/python-list
www.spoj.pl/problems/BLINNET/
Here is the code for the same... Its not getting AC in SPOJ
m not able to figure out wheres the hole in this... plzz help
#includeiostream
#includestring
#includevector
#includelist
#includequeue
#define MAXINT (int)9e9
#define TR(a,it)
This code is not getting AC on spoj.. m not able to point out the
error plzzz help.
Here is the link to this problem at spoj : http://www.spoj.pl/problems/INVCNT/
#includeiostream
#includevector
#includestring
#includealgorithm
using namespace std;
void MergeSort(vectorint v, int p, int r);
Thanks dude!!
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
algogeeks+unsubscr...@googlegroups.com.
For more options, visit this
Thanks Harshal!!
Actually changing juzz count from int to long long suffices
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
This q increased my score by directly 3 points... and thats a huge
one.. :D
@ kartik - Do it by priorty queue for better efficiency..
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to
A few companies make this type of deal. I saw them YEARS ago:
http://www.solarcrete.com/insulated-concrete-wall.php
They can be very large slabs with foam core and wire skeleton on
them.
You spray a few inches of concrete on the inside and outside.
The foam slab core creates the thermal break
involve some hacking to get the SNMP through and so on.
Sorry, I don't seem to have a clean solution for your situation at this
point.
Regards
KK
On 13 June 2011 12:15, man monaco glamourous...@yahoo.com wrote:
Hello,
I was trying to test OpenRoads, but i couldn't obtain all required physical
@kunal
Actually its not same value its the same variable and it arises only
if u code the given way(and some people do it this way)
void swap(int a, int b)
{
a ^= b ^= a ^= b;
}
now we have
int a = 10;
swap(a, a)
This will set a's value to 0...and this happens while sorting arrays
It wont give correct answer when u pass same values of a and b and
such conditions arises in sorting
--
***
Kunal Kapadia
Computer Science and Engineering
B.Tech 2nd yr
NIT Trichy
***
--
You received this
It works!!
Shame on u Umer Farooq u cant even give a call a no for ur nation
whereas other are on hunger strike... even if this is algo group so
whats the problem???... m sorry to say this...
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To
I have python 3.2 installed m not able to install PyQt.
i have downloaded and configured sip but how to build it???
whats the make and make install given on the installation
Plzzz help m a newbie to python
--
http://mail.python.org/mailman/listinfo/python-list
Thanks for the reply!!
i ve installed the binary
but when i import anything of PyQt in my prog it says error??
i think there is some problem with folders
--
http://mail.python.org/mailman/listinfo/python-list
This is the link to the SPOJ problem HASHIT :
http://www.spoj.pl/problems/HASHIT/
i donno whts the mistake... i keep getting wrong answer even though
the Q is Straightforward :(
#includeiostream
#includestring
using namespace std;
int hash(string str)
{
int sum = 0;
int len =
Search Topcoder Tutorial Range Minimum Query @ Google...
By few intuitive changes u can implement Range Maximum Query as well...
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
association.
By using something like SNMP, we can send a SNMP trap/inform when the client
associate with the AP or base-station. This allows for a much faster
reaction to a client association, thus improving handover.
Hope the explanation is clear.
Regards
KK
On 8 June 2011 22:47, man monaco glamourous
of the spec can look
into how the situation can be improved (if applicable).
FYI.
Regards
KK
___
openflow-discuss mailing list
openflow-discuss@lists.stanford.edu
https://mailman.stanford.edu/mailman/listinfo/openflow-discuss
I use an Oxy Cycle that cost $100 from Allegromedical.com
KK
--- On Tue, 6/7/11, bob quinn r...@sockets.com wrote:
From: bob quinn r...@sockets.com
Subject: Re: [QUAD-L] table top hand bike
To: Todd Daugherty todd.daughe...@gmail.com, quad list
quad-list@eskimo.com
Date: Tuesday, June 7, 2011
have another hurricane, I'll keep you informed.
KK
Regarding cutting guides, you can buy a 8 foot aluminum cutting guide
in the ruler/bubble level section of Home Depot. They clamp to wood
and allow you to run a knife along to do long straight cuts.
This model is the only one shown online:
Empire No. 900, 8 ft. x 6 in. Pro's Edge Wide Aluminum
For list of components, you can try this:
http://noxrepo.org/~yapkke/doc/classvigil_1_1container_1_1Component.html
Regards
KK
On 2 June 2011 00:36, Murphy McCauley jam...@nau.edu wrote:
Probably the best resource is on the wiki:
http://noxrepo.org/noxwiki/index.php/Using_NOX
There is also
This? :)
http://noxrepo.org/~yapkke/doc/classnox_1_1lib_1_1core_1_1Component.html
Regards
KK
On 2 June 2011 00:45, Murphy McCauley jam...@nau.edu wrote:
Oh, great thought, KK!
Note, however, that this does not show Python-only components.
-- Murphy
On Jun 2, 2011, at 12:41 AM, kk yap
. The short answer here is no, you cannot
install flow rules using GUI in NOX---as Kyriakos has previously
mentioned in nox-dev. The GUI shows statistics and the topology of
the network.
Is there any reason why ovs-ofctl does not work for you (e.g., you
don't use ovs)?
Regards
KK
Disclosure I
And I did not know that. Fantastic! Thanks! This will help all of us greatly.
Regards
KK
On 2 June 2011 15:19, Ben Pfaff b...@nicira.com wrote:
On Thu, Jun 02, 2011 at 01:30:31PM -0700, kk yap wrote:
Is there any reason why ovs-ofctl does not work for you (e.g., you
don't use ovs
and the flow_mod generated the error.
You do not need to tweak TCP options for this. It is usu. done in an
async manner. If you are using a controller like NOX, then this
should not really be of much concern. Are you whipping up a new
controller?
Regards
KK
On 20 May 2011 13:11, G A ga_a
. It was previously working,
FYI.
Regards
KK and TY
cookie-bug.pcap
Description: application/extension-pcap
___
discuss mailing list
discuss@openvswitch.org
http://openvswitch.org/mailman/listinfo/discuss
Thanks for the clarification.
Regards
KK
On 20 May 2011 16:44, Ben Pfaff b...@nicira.com wrote:
I pushed the patch.
You can tell that both cookie members are in network byte order by
looking at the types: both are declared as type ovs_be64 (the be
stands for big-endian).
On Fri, May 20
/classvigil_1_1applications_1_1Routing__module.html#_details
Regards
KK
On 19 May 2011 07:45, fernando farias fer...@yahoo.com.br wrote:
Hi Marwen
There is a project called initially of QuagFlow and now RouteFlow that is
able to use route protocols (OSPF, BGP, RIP ...) together with NOX.
http://chesteve.wordpress.com/2010/07/07/quagflow
I have juz started python and finished A Byte of Python
Now to which book should i switch too???
Also recommend Python books to master it!!
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to
ARP is a great idea. Someone should give it a try, though I know some
routers sometimes do funny things with ARP for their own devices, but that
would not be too big an issue I guess.
Regards
KK
On 6 May 2011 03:59, Murphy McCauley jam...@nau.edu wrote:
I don't consider this a big issue
Hi, I have a problem with koha authority.
I have added a new authority record (using Home › Authorities › Adding
authority Personal Name). But when I am searching for that record it returns
'No Result Found'.
Could someone tell me what is the problem?
With Thanks n regards
Sunitha
Search Topcoder Tutorial on Google..
On Apr 17, 9:06 pm, naga vinod kumar vinodkumark...@gmail.com wrote:
Hi Guys ,
Can any one give link for tutorial or videos about
segment trees. I am unable to understand the basic idea behind it .
Regards,
vinod
--
You received
started to support OpenFlow. That might be a
viable option for you too.
Sorry, I really wanted to spend some time on this but just don't see
when that would be at this moment.
Regards
KK
2011/4/17 Ali hussain alihussain...@hotmail.com:
Hi
I havent been yet successful in re-establishing
Hi Max,
Something like this?
http://noxrepo.org/noxwiki/index.php/Main_Page
http://noxrepo.org/~yapkke/doc/
Regards
KK
On 27 April 2011 00:15, Max Ott max@nicta.com.au wrote:
On 26/04/2011, at 4:20 PM, kk yap wrote:
Hi Max,
Can you elaborate on what you mean by pyswitch being aware
Check out YouTube.com. I know that wheelchairjunkie has a few video's of his
boat. Not a pontoon tho. There are video's of wheelchair users pontoons
there also.
Mark works for Pride Mobility has a great web site himself.
http://www.wheelchairjunkie.com/whatsnew.html
KK
Hi Max,
Can you elaborate on what you mean by pyswitch being aware or unaware
of VLAN? Do you expect the switch to rewrite the VLAN so that hosts
on different VLAN can ping each other?
Regards
KK
On 25 April 2011 22:44, Srini Seetharaman seeth...@stanford.edu wrote:
Hi Max
This mail is more
is in
C/C++.
I am not sure about the Python API. So, maybe someone can update us on it.
Regards
KK
On 26 April 2011 14:45, Yiannis Yiakoumis gyiakou...@gmail.com wrote:
Hi Nauman,
Which OpenFlow implementation do you use? The rererence code (1.0) supports
queue set-up through dpctl commands (out
Hi Max,
Can you elaborate on what you mean by pyswitch being aware or unaware
of VLAN? Do you expect the switch to rewrite the VLAN so that hosts
on different VLAN can ping each other?
Regards
KK
On 25 April 2011 22:44, Srini Seetharaman seeth...@stanford.edu wrote:
Hi Max
This mail is more
Hey it seems to be a fake link... It directs to some site which
shorten URLs
--
You received this message because you are subscribed to the Google Groups
Algorithm Geeks group.
To post to this group, send email to algogeeks@googlegroups.com.
To unsubscribe from this group, send email to
701 - 800 of 2321 matches
Mail list logo
