Ben,
How well does AIO work? Is the omission on the matrix deliberate - i.e. does
it
reflect the fact that there are unresolved issues? Is it safer to buy the
9632?
All of the AIO's features work as does the matrix. The card is
configured through standard ALSA controls.
Flo
--
On 05/22/13 03:13, Ben Briedis wrote:
Subject: [off-list] [Alsa-user] Is RME HDSPe AIO supported?
From: ralf.mard...@alice-dsl.net
To: benbrie...@hotmail.com
Date: Tue, 21 May 2013 12:25:41 +0200
Off-list, since the mail at least seems to be delayed. It didn't came
through the list right
On 12/31/10 13:56, David Lam wrote:
http://wiki.linuxproaudio.org/index.php/Driver:hdspe
I have followed the instructions mentioned in that site still cannot get
the driver works.
This is not an official alsa driver, so you are asking in the wrong place.
When I make install it has error
On 12/31/10 14:07, Michael Gerdau wrote:
Could it be that the ExpressCard is not supported by the driver ?
No. The express card behaves exactly like the cardbus card, except for
the host interface.
Would I need a different firmware that the one provided by ALSA firmware ?
No.
What else
Martin,
i would like to run a rme hdspe aio on linux,
is the Card supported ?
Not fully yet, only 1024 period operation for the moment.
if true
how to get it to work ??
http://wiki.linuxproaudio.org/index.php/Driver:hdspm
http://wiki.linuxproaudio.org/index.php/App:hdspmixer_64
any
Tobi,
I could only found an ALSA driver for the PCI version HDSP MADI. Is there
also a
driver available to use with the PCI Express Bus version HDSPe MADI?
The same driver. All the PCIe versions are handled the same way as their
PCI equivalents.
Flo
--
Machines can do the work, so people
How can I set up capture Volume on RME Hammerfall DSP MADI?
You cannot.
The capturing volume is low
Well, turn up the gain on whatever you connected to the MADI bus.
Flo
--
Machines can do the work, so people have time to think.
public key 6C002249 x-hkp://wwwkeys.eu.pgp.net
Lars,
I have two sound cards; one RME9652, and one built-in VIA thing. The
RME is connected to the stereo via S/PDIF, and the VIA thing is
connected to a wireless transmitter.
Besides the ALSA configuration problem - it won't work unless both sound
devices are in sync. All RME devices can
Hi Ales,
i configure hdsp with alsaconfig, then hdsp appears in my application
(pure data), but no sound.
i get from alsamixer : no elems found
which should mean that card 1 has no mixer interface,
i think all volumes on alsamixer are down,
but i can't open ANY mixer.
The mixer you want
Ales,
Yes: What card is it? If it is the interface card, then there is no
IO Box connected/recognized. Please post the output
of /proc/asound/card0/hdsp and if it is an interface card, the
kernel messages when you load the module or boot (with dmesg).
it is multiface, i think previous
Martin,
I want to use a RME Multiface soundcard with PCMCIA Cardbus Card on a
Dell Notebook with Ubuntu. [..]
Now the card has 8 in and 8 output channels,
Well, actually, you have 18 input and 20 output channels with the
multiface :)
I get only one digital playback device which is the 2
Grant,
Is there any way to test the digital contents of a FLAC file against
the digital stream sent to the sound card for a match?
Play it out a digital line and loop it back, if you want to be
absolutely sure.
Flo
--
Machines can do the work, so people have time to think.
public key
Chris,
A little peeve with some so called pro audio servers is their
inability to act as a 'digital wire', ie: what goes in comes out,
totally unchanged. As an example, there are times you may want the
same exact 16 bits you send out of app to arrive at the audio device
unmolested. Jack,
On Thursday 12 June 2008 20:10:04 Chris Smith wrote:
On Thursday 12 June 2008, Florian Faber wrote:
What makes you think converting a 16 bit unsigned integer to a IEEE
32 bit float and back would change the value?
Should have used a 24 bit example. I'm of the opinion
Chris,
On IEEE 32 bit floats the mantissa is 23 bit, so there might be
situations where you loose the LSB.
And that was the only point - a pro audio chain should be able to
support digital wire capability.
This has nothing to do with the original poster's issues, so I changed
the subject.
Alex,
The idea is the following :
1.) Of course there has to be an input double buffer which generates
the desired block of samples.
You want hardware monitoring - there are sound cards that support
hardware mixing. With good converters you have latencies down to 5
samples at 192kHz, that
Greg,
I had the vision that the option was in the configuration dialog, but
that is not the case for hammerfall 9636, though it was for 9632.
Now I understand what you meant. But setting the input level wouldn't
help you connecting microphones to the AEB8 :)
I am rewriting the tools at the
Greg,
I have a hammerfall 9636 card on my linux 64 studio machine. got
it working today but have a question regarding recording volume on
the card. The thing is that it seems too low. When connecting the
microphone directly to the AEB-8 extension board for analog input,
I only have
Greg,
I have a hammerfall 9636 card on my linux 64 studio machine. got it
working today but have a question regarding recording volume on the
card. The thing is that it seems too low. When connecting the
microphone directly to the AEB-8 extension board for analog input, I
only have vague
Mark,
Any chance you might be working on hdspmixer at the same time.
Yes, another main goal right now is bringing the hdsp user space
applications up-to-date.
I worked on testing it when Thomas Charbonell first wrote the program.
One disappointing limitation of the whole HDSP Linux support
20 matches
Mail list logo
