Hello,
It is my understanding that amanda will run a level 0 dump when it meets
certian thresholds based upon definitions in the amanda.conf. It is also
my understanding that amanda is not desigined to run a level 0 on some day
and some time.
Friday two of my hosts had a lvl 0 dump. This
Malcolm Herbert wrote:
The first question is how to easily stagger 0-level dumps across a
dump cycle where some disks need to be backed up at different frequency
to others.
You can use different dump types for different disks. In these special
dumptypes set the desired dumpcycle for that
++ 07/01/02 09:36 -0800 - Frank Wojcik:
FAILURE AND STRANGE DUMP SUMMARY:
taper: FATAL cannot allocate shared memory
amflush: ERROR Cannot flush without tape. Try again.
I use a 7 day dump/tapecycle with 8 tapes.
The OS is FreeBSD 4.5-PRERELEASE and the Amanda-source is from a
On Mon, 7 Jan 2002 at 3:05pm, Don Potter wrote
I'm presently testing amanda out before I proceed with actually
implementation. I' m just sending dumps to the holding area to see
speed and so forth. My holding area is 34GB and I have the reserve set
for 50%.
The dumps aren't saved
Hello,
i'm using Amanda with a Seagate IDE Tape Streamer using IDE-SCSI Module for
accesing the drive.
When Amanda starts reading or writing to tape, the following error message
appears on the console:
st0: Error with sense Data: Current st09:00: Sense Key Illegal request
Additional sense
On Mon, 7 Jan 2002, Don Potter wrote:
I have two file systems that will no dump to holding_area statin g that
they are too large:
chgsfs /home5 lev 0 FAILED [dump larger than tape, but cannot incremental dump
new disk]
exon /export/home/bioproj00 lev 0 FAILED [dump larger than
I currently have amanda backing up several linux servers that I have used to
restore data from using amrestore. Now that I have amanda working properly I
would like it to back up my win2k machines as well. Can someone point me to
or explain what is needed to make this happen. It seems I have read
On Mon, 7 Jan 2002 at 3:09pm, Lewis Watson wrote
I currently have amanda backing up several linux servers that I have used to
restore data from using amrestore. Now that I have amanda working properly I
would like it to back up my win2k machines as well. Can someone point me to
or explain
Running amcheck results it the following:
ERROR: localhost.localdomain: [access as amandauser not allowed from
[EMAIL PROTECTED]] amandahostsauth failed
I have created a .amandahosts file with the following entry:
localhost.localdomain amandauser
Help?
thanks,
--charlie
--
On Mon, 7 Jan 2002 at 5:08pm, Charles Farinella wrote
ERROR: localhost.localdomain: [access as amandauser not allowed from
[EMAIL PROTECTED]] amandahostsauth failed
I have created a .amandahosts file with the following entry:
localhost.localdomain amandauser
You've got some DNS oddness
10 matches
Mail list logo
