On 9/19/22 14:49, Charles Curley wrote:
On Fri, 16 Sep 2022 11:52:18 -0400
gene heskett wrote:
The first thing I note is the use of port 5000, and I'm wondering
about the possibility of fighting
over the ports as Octoprint uses FQDN:5000 as its web server to
administer its designated 3d
On Fri, 16 Sep 2022 11:52:18 -0400
gene heskett wrote:
> The first thing I note is the use of port 5000, and I'm wondering
> about the possibility of fighting
> over the ports as Octoprint uses FQDN:5000 as its web server to
> administer its designated 3d printer.
Gene, I don't know where you
On 9/19/22 03:19, Stefan G. Weichinger wrote:
Am 16.09.22 um 17:52 schrieb gene heskett:
The first thing I note is the use of port 5000, and I'm wondering
about the possibility of fighting
over the ports as Octoprint uses FQDN:5000 as its web server to
administer its designated 3d printer.
Am 16.09.22 um 17:52 schrieb gene heskett:
The first thing I note is the use of port 5000, and I'm wondering about
the possibility of fighting
over the ports as Octoprint uses FQDN:5000 as its web server to
administer its designated 3d printer.
I expect its changeable, and I've done it to
Am 16.09.22 um 16:55 schrieb gene heskett:
On 9/16/22 07:28, Stefan G. Weichinger wrote:
I might rebuild later if needed, just wanted to share asap. Right now
I am quite busy with X things.
.
I agree, Wayland in place of X needs all the help it can get.
I didn't mean X11 ;-) .. wanted to
On 9/16/22 07:28, Stefan G. Weichinger wrote:
Am 02.08.22 um 17:26 schrieb Jose M Calhariz:
I am not doing progress in solving the autotools problems.
I copied debian directory from official Debian 3.5.1, refresh patches,
and "debuild". I fails with alot of warnings and this relevant error:
On 9/16/22 07:28, Stefan G. Weichinger wrote:
Am 02.08.22 um 17:26 schrieb Jose M Calhariz:
I am not doing progress in solving the autotools problems.
I copied debian directory from official Debian 3.5.1, refresh patches,
and "debuild". I fails with alot of warnings and this relevant error:
Am 02.08.22 um 17:26 schrieb Jose M Calhariz:
I am not doing progress in solving the autotools problems.
I copied debian directory from official Debian 3.5.1, refresh patches,
and "debuild". I fails with alot of warnings and this relevant error:
automake: error: cannot open <
