DSB == Debra S Baddorf badd...@fnal.gov writes:
DSB O. OK, next answer might have to be from an expert. I’m
DSB guessing that amanda thinks “well, maybe he already DID put another
DSB tape in a slot somewhere, and I just have to go look for it”. I
DSB *would* think it would scan the
Jason,
Which taperscan are you using?
The default 'traditional' read all slots.
Try the 'lexical' or 'oldest'.
Jean-Louis
On 04/02/2015 02:20 PM, Jason L Tibbitts III wrote:
I'm running 3.3.6 (but could easily upgrade if it would help). For a
long time I've been wondering about amanda's
On Apr 2, 2015, at 2:23 PM, Cuttler, Brian (HEALTH)
brian.cutt...@health.ny.gov wrote:
When I've killed amcheck, or for that matter any command that exercises the
robot that I have to wait for the often disconnected MTX job to complete,
which can take several minutes, depending I suppose
I have my changer divided into two separate configurations.
My DAILY config uses slots 1-40. Tape drive 0.
The ARCHIVE config uses slots 41-48. Tape drive 1.
Never the twain shall meet.
Does that answer the question? Yes, amanda listens quite well, and refuses
to obey if I tell it
JM == Jean-Louis Martineau martin...@zmanda.com writes:
JM Which taperscan are you using?
Heh, I had no idea those even existed. I've been porting my amanda.conf
around since, well, a very long time ago, and it didn't have a taperscan
definition.
JM The default 'traditional' read all slots.
On Thu, Apr 02, 2015 at 03:53:16PM -0400, Jean-Louis Martineau wrote:
Jason,
Which taperscan are you using?
The default 'traditional' read all slots.
Try the 'lexical' or 'oldest'.
I've never used a changer where all slots were not devoted
to amanda. So I ask these from inexperience.
Are you using the “robot” type changer?See man amanda-changers
define changer LTO5-robot {
tpchanger chg-robot:/dev/changer” # or “chg-robot:/dev/sgNN”
property tape-device 0=tape:/dev/nst0
changerfile /usr/local/etc/amanda/LTO5-Robot-state”
…. other settings …..
}
DSB == Debra S Baddorf badd...@fnal.gov writes:
DSB Are you using the “robot” type changer?
Yes:
define changer magnum {
tpchanger chg-robot:/dev/sg8
property tape-device 0=tape:/dev/nst0
device-property LEOM TRUE
device-property BLOCK_SIZE 512k
changerfile
O. OK, next answer might have to be from an expert.
I’m guessing that amanda thinks “well, maybe he already DID put another tape
in a slot somewhere, and I just have to go look for it”.
I *would* think it would scan the barcodes first, though.
I DO think you can control-C an amcheck
I'm running 3.3.6 (but could easily upgrade if it would help). For a
long time I've been wondering about amanda's behaves when I have a
tapecycle larger than the number of tapes in my barcode-supporting
library and all of the tapes in the library have been recently written.
When the next tape in
10 matches
Mail list logo