Re: vault from aggregate changer to tape

Am 2017-11-27 um 14:43 schrieb Winston Sorfleet: I've been having a devil of a time trying to get a similar configuration working since 3.4.5. Could you post a copy of your working config? I could but I would prefer to maybe start some kind of howto or collection of examples that might go

Re: vault from aggregate changer to tape

I've been having a devil of a time trying to get a similar configuration working since 3.4.5. Could you post a copy of your working config? On November 27, 2017 7:02:04 AM EST, "Stefan G. Weichinger" wrote: >Am 2017-11-27 um 12:48 schrieb Jean-Louis Martineau: >> Stefan, >>

Re: vault from aggregate changer to tape

Am 2017-11-27 um 12:48 schrieb Jean-Louis Martineau: > Stefan, > > Which disk is UUID=5a5a9927-995f-4f0f-98ff-d222561f84ff, why amanda > can't mount it? I mentioned it: one external disk is attached, the other one is out of office. It can't be mounted because it is currently stored off-site. I

Re: vault from aggregate changer to tape

On Mon, Nov 27, 2017 at 12:20:59 +0100, Stefan G. Weichinger wrote: > $ amvault --fulls-only --src-storage vtape --dest-storage band vtape > --src-timestamp 20171110231503 server > mount: can't find UUID=5a5a9927-995f-4f0f-98ff-d222561f84ff > No acceptable volumes found Off hand (without

Re: vault from aggregate changer to tape

Stefan, Which disk is UUID=5a5a9927-995f-4f0f-98ff-d222561f84ff, why amanda can't mount it? The 'No acceptable volumes found' message is from which storage? Are you sure you have a tape in band that amanda can use? You can run 'amcheck CONFIG -t -ostorage=band' to find it. Jean-Louis On

vault from aggregate changer to tape

I try to set up this: 1) storage "vtape" : an aggregate changer running 2 external disks plus : allow-missing-changer yes -> one external disk is out of the building ... 2) storage "band" : a tapedrive I want to transfer fulls from vtapes to tape, dryrun shows DLEs: $ amvault