as the Diguim one - so I conclude it is something wrong
with my asterisk box.
- Original Message -
From: Wireless
To: asterisk-users@lists.digium.com
Sent: Wednesday, May 16, 2007 2:04 PM
Subject: [asterisk-users] G729 Transcoding problems
Hi
I've bought the Digium g729 codec
Hi
I've bought the Digium g729 codec and have installed it correctly (I think)
voip*CLI show g729
0/0 encoders/decoders of 3 licensed channels are currently in use
if I do an echo test either from a sip Cisco 7960 or another hard phone
(unbranded)
using g729 it sometimes works and sometimes
In your zaptel.conf you need to use fxsks rather than fxoks
hth
Harvey
- Original Message -
From: J. David Bavousett [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, May 16, 2007 3:59 PM
Subject:
in zaptel.conf use fxsks
- Original Message -
From: J. David Bavousett [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, May 16, 2007 3:59 PM
Subject: [asterisk-users] Outside lines are *STILL* just not
are *STILL* just not
happening...
Really, Harvey?
Lines 1-4 are FXS ports, lines 5-8 are FXO... My outside line is
plugged into port 8. Ports 1-4 are inside, and work fine.
--David
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Wireless
Sent: Wednesday
In the UK CLID is sent before the 1st ring.
- Original Message -
From: Tzafrir Cohen [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Tuesday, April 24, 2007 11:15 PM
Subject: Re: [asterisk-users] UK zaptel and zapata.conf for TDM400P
On Tue, Apr 24, 2007 at 09:35:07PM
I preffer not dialing 9 and have set up my server like this. One thing that
does puzzle me is would it be possible to dial +441232345634 I come accross
this problem as all my cell phone contacts are preffixed + I then sync these
contacts with my laptop and sometimes cut / past the number into a
I use Trixbox 2.0 with a Sangoma A200 I also have echo so bought the HPEC and
yes it works brilliantly. The problem I have is I used to use Trixbox 1.? with
this sam hardware and had a few inbound CLID issues on my UK BT lines, Sangoma
support suggested changing the RXGAIN in zapata.conf and it
I've been running Digium TDM400P with 2 FXO and now I run a Sangoma A200 with 2
FXO and no hwec, both cards have suffered echo, one of my lines is much worse
than the other. I messed about for a year using the software EC in Zaptel and
whilst I could remove the echo on one line the other would
I've been using Voiptalk.org for about a year now and it passes the wife
test no problem at all. IAX2 is supported with trunking to save a bit of
bandwidth.
I use sipgate for an incomming ringback number very very handy.
I use Gradwell for domain reg etc and they are excellent I've no reason to
can you give a bit more info? I know that you need nat=never for example
- Original Message -
From: Khaled
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Cc: [EMAIL PROTECTED]
Sent: Tuesday, February 27, 2007 10:03 AM
Subject: [asterisk-users] Cisco 7960
- Original Message -
From: Nic Bellamy [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Friday, February 16, 2007 12:56 AM
Subject: Re: [asterisk-users] The High Performance Echo Canceller (HPEC)
Wireless wrote
is it a spinlock problem? try
http://www.trixbox.org/modules/newbb/viewtopic.php?viewmode=flattopic_id=1626forum=2
- Original Message -
From: Mail list
To: Asterisk Users Mailing List - Non-Commercial Discussion
Sent: Monday, February 19, 2007 3:38 PM
Subject: Re:
- Original Message -
From: Nic Bellamy [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Monday, February 19, 2007 8:21 PM
Subject: Re: [asterisk-users] The High Performance Echo Canceller (HPEC)
Wireless wrote:
looks
- Original Message -
From: Nic Bellamy [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Tuesday, February 13, 2007 8:40 PM
Subject: Re: [asterisk-users] The High Performance Echo Canceller (HPEC)
Larry Shields wrote:
- Original Message -
From: Nic Bellamy [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Thursday, February 15, 2007 8:53 PM
Subject: Re: [asterisk-users] The High Performance Echo Canceller (HPEC)
Wireless wrote
Spamming aside, you can buy these cheaper from a ebay seller in Germany -
including post
- Original Message -
From: Dave Cotton [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, February 14, 2007 8:41 AM
I'd use a MikroTik or 2
- Original Message -
From: Ronald Wiplinger [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Wednesday, February 14, 2007 2:19 PM
Subject: [asterisk-users] Bandwidth shapping device
I have a
should have sent this to the list, Gordon how are you getting on with BT?
- Original Message -
From: Gordon Henderson [EMAIL PROTECTED]
To: Wireless [EMAIL PROTECTED]
Sent: Friday, January 12, 2007 10:45 PM
Subject: Re: [asterisk-users] Echo...
On Fri, 12 Jan 2007, Wireless wrote
(applogies for the layout, having to use outlook)
If I could crack the Echo problem then the VOIP PBX would pass the rigorous
wife test (WT). I've used the TDM400P card and reduced the echo on one of
my 2 BT lines (the other one seems much better, but not perfect) to a point
where I can live
You can start off using Soft Phones on your PC (they are free) at 1st once
your happy that you want to play voip then you can get either a VOIP hard
phone or a VOIP to analog adaptor (Analog Telephone Adaptor), the latter
provides you with an FXS port that you can plug a normal phone into or
Hi Gordon
I too have this problem with one of my two BT lines, very very annoying. I
was using a TDM400P and am now using a Sangoma A200 (lightning got the TDM),
I think the sangoma is very slightly better (less echo) but I might just be
kidding myself. Another think I've found it that using a
- Original Message -
From: Martin Joseph [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Wednesday, August 16, 2006 7:50 AM
Subject: [asterisk-users] Re: New Device
On 2006-08-15 13:10:05 -0700, Dovid Bender [EMAIL PROTECTED]
said:
This is a multi-part message in
Hi Stephen
I started off using the SPA-3000 for FXO and FXS but could not kill the echo
enough to pass the wife test so I invested in a Diguim TDM400p with 2 FXO
ports, ran the fxotune app and the echo was gone! I now use the SPA-3000 as
FXS and have the pots line plugged in as a life line if
I found that the Fax detect delay in the extentions.conf was causing my
system to have a delay
[from-pstn-reghours]
exten = s,1,GotoIf($[${FAX_RX} = disabled]?from-pstn-reghours-nofax,s,1:2)
; if fax detection is disabled, then jump to from-pstn-nofax - else continue
exten = s,2,Answer
exten =
the Linksys and Sipura SPA-3000 are the same, just the plastic box is
different
- Original Message -
From: John Jensen [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Thursday, March 02, 2006 1:53 PM
Subject: Re: [Asterisk-Users] Sipura SPA-3000 vs Linksys SPA3000
Hi
Does anyone have this working on 1800MHz eg TMobile or Orange in the UK
and does CLID work or not?
THanks
Harvey
- Original Message -
From: Conrad Wood [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Friday, February
Here is my experience so far to treat some issues I have been having with
Digium hardware (t100p, and x100p's.) I am not 100% certain these are
fixxes, but just something for people to try if they are expierencing
issues with the hardware performing quirky.
1st) Do NOT use Promise Array ATA
Hello,
I am seeing this error:
Jan 24 20:02:53 WARNING[1175660480]: Ring/Off-hook in strange state 6 on
channel 3
on one of my phone lines that comes into my channel bank. It only happens
on one line, and it still seems to work. Also, I have had two different
channel banks installed (ADIT 600
Is probably not the best way to handle it, but you could store all sounds
in one directory and then create another directory that has subdirectories
like weather. The items that are most frequently used would then be
symlinked to the original sound directory. Just another way of organizing
it.
Hello All,
I received my Adit 600 yesterday and I have an 8 port FXO CAC FXO card
installed. That is the only module in the CB. I have the config on the *
side correct, however I am not sure.
I had the system running great for about 2 hour, and then it seemed to be
having problems. Incoming
Hello,
I have searched the lists, and have seen this message posted numerous
times, however there never seem to be any replies to it.
I was curious if anyone had figured out the WARNING:
File chan_iax2.c, Line 5466 (set_config): Ignoring port for now
Everything seems to work just fine, however
Yes,
Check out VoicePulse, they bill by the minute with no monthly fee.
IConnectHere also allows plans that bill by the minute, however there is a
0.65/month fee. Which, considering the ammount you'll save, is very very
tiny.
Regards,
Brent
On Mon, 22 Dec 2003, Hector Q.-datafull wrote:
Hi,
33 matches
Mail list logo