Hi All,
I have a question about the Queues.
I'm using Asterisk 11.13.0 , and I want to configure the following setup :
When there is an incoming call to the queue all agents should ring even
those that are already in call, they should receive a second call.
Is this doable in any Asterisk
Hi,
Thanks for your reply.
It's working. I forgot to enable call waiting under extensions in
Asterisk.
Best regards
On Mon, Sep 21, 2015 at 3:36 PM, Ishfaq Malik wrote:
>
>
> On 21 September 2015 at 15:27, Aziz TestAccount
> wrote:
>
>> Hi All,
On 21 September 2015 at 15:27, Aziz TestAccount
wrote:
> Hi All,
>
> I have a question about the Queues.
>
> I'm using Asterisk 11.13.0 , and I want to configure the following setup :
>
> When there is an incoming call to the queue all agents should ring even
> those that
Interface type?
On Fri, May 28, 2010 at 1:47 AM, bhrugu mehta mehtabhr...@gmail.com wrote:
hi, all
Is ther any way to set up call-waiting feature in asterisk using dialplan or
any other ways. I want to use only
asterisk for that not any other gui.
I am using asterisk 1.4.28.
Regards,
hi, all
Is ther any way to set up call-waiting feature in asterisk using dialplan or
any other ways. I want to use only
asterisk for that not any other gui.
I am using asterisk 1.4.28.
Regards,
--
Bhrugu Mehta
Sr. S/W Engineer (DD)
VOIP,Telephony Team
India
--
Hi all,
How can I implement a full-featured Call-Waiting behavior on the Asterisk level
(e.g. I don't want to relay on end-equipment capabilities)?
I found it very strange that such a basic feature is not built-in in Asterisk
(and I've googled a lot in search for this).
Here is what I need:
If you use zap then asterisk already does it. With sip the phones will
not tell asterisk about the hook flash. However you can play around
with dynamic features and assign a key that will mimic hook flash.
Injecting the beep sound might be hard though. Playing a different
ring to 2nd caller based
Greetings all-
I've got a rather odd situation and would like to know if anyone can shed some
light on the issue.
Some background- I've got an * system running 1.4.11 (yes I know it's older..
upgrades are planned at some point...). I also have a remote user with a
cordless phone connected to
Are you doing *0 after you flash the hook? This will flash the fxo
line for you. I do wish there was a way to get Asterisk to answer the
call waiting on the fxo, all I ever get is the call waiting beep and I
get to answer it myself, otherwise it goes to telco's voicemail.
on Wednesday
On 7/11/2007 at 11:04 AM, Joe acquisto [EMAIL PROTECTED] wrote:
Since the beginning (of my Asterisk life) I have an install that is,
supposedly, set up for call waiting.
Using a TDM400p, with FXO and FXS modules.
On the Analog phones, I can hear the Incoming call (call waiting) tone, but
try to transfer current call to parking spot, i.e. exten 700, then deal
with new incoming call, then go back to parking space to pick up old
caller when you're free. Just set the parking extension timeout to
something long so they don't fall out right away.
Moj
Joe acquisto wrote:
On
Since the beginning (of my Asterisk life) I have an install that is,
supposedly, set up for call waiting.
Using a TDM400p, with FXO and FXS modules.
On the Analog phones, I can hear the Incoming call (call waiting) tone, but the
system does not respond to a hook flash, to place the current
Is your incoming context using chanisavail, while your internal-dialing
context is not, and just sends the call, without checking?
Mojo
Michael Wareman wrote:
Hi,
I have (to me) an interesting problem.
There are 3 physical extensions, 11, 12 and 13. All hang off Sipura
adapters.
There
Hi,
I have (to me) an interesting problem.
There are 3 physical extensions, 11, 12 and 13. All hang off Sipura
adapters.
There is also extension 10 which simply uses 'Dial(SIP/11SIP/12SIP/13)' to
call all phones in the house.
Incoming calls from outside get sent to 10 in order that they can be
Hello.
After doing much web searching and searching archives of this mailing
list, I see that my question has been asked at least 6 separate times
but no answers have been attached.
In a nutshell, is there a way for a SIP phone to easily hook flash a ZAP
analog trunk mid-call? (This is
Yehavi Bourvine +972-8-9489444 ha scritto:
This is not what I meant. I want the called party to get a sign of a waiting
call and answer it if he/she wants.
Ok, that's an UAC option
I want the caller to know that he on a
waiting call (here it is customary to play a stuttered ring tone).
in
Hello,
When dialling a SIP phone which is already in a call the caller hears a
regular ringing tone and does not know that the called party is engaged in
another call. Is there a supported way inside SIP to tell the calling party to
play a stuttered ringing tone?
Hello,
this is a SIP phone configuration issue.
You should tell the UAC to not accept a second call while the line is
engaged (look for a 'Call Waiting' option in the configuration of the UAC)
The UAC will send back a 486 Busy Here error code and the calling
party will get a busy signal
this is a SIP phone configuration issue.
You should tell the UAC to not accept a second call while the line is
engaged (look for a 'Call Waiting' option in the configuration of the UAC)
The UAC will send back a 486 Busy Here error code and the calling
party will get a busy signal from
On 3/30/07, Rizwan Hisham [EMAIL PROTECTED] wrote:
If you are using sip then you should look for the call-limit option in
sip.conf file.
Using IAX. Is that a problem?
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing
If you are using sip then you should look for the call-limit option in
sip.conf file.
On 3/30/07, Lachek Butalek [EMAIL PROTECTED] wrote:
Situation, simple home setup:
* Trixbox 2.0
* Feature Codes installed
* GNet PA-168V based ATA
* Cheesy cordless analogue phone
From what I gather,
Situation, simple home setup:
* Trixbox 2.0
* Feature Codes installed
* GNet PA-168V based ATA
* Cheesy cordless analogue phone
From what I gather, dialing *70 from the handset should activate Call
Waiting. All it seems to do is change the message The person at
extension is on the phone to
Problem: *Call* *waiting* comes in, I press flash to answer it, and the
first caller gets disconnected after 3 seconds. This is all ZAP - no VOIP.
System:
Analog stations and trunks running on a pair of TDM400's. It does NOT have *
call* *waiting* from the phone company, and I have enabled it in
Hi Kevin,
Thanks, that's what I thought but sometimes you need a second opinion
from someone with more experience to get administration off your back
about an issue such as this.
Kevin
Kevin P. Fleming wrote:
Kevin Smith wrote:
We are running Polycom 601's. I can't seem to find
Hi everyone,
We are running Polycom 601's. I can't seem to find anything to say one
way or another on this issue, so I figured I would ask. I have call
waiting notification working on the phones when a user is on the phone.
However, is it possible to see the notification on the screen or hear
Kevin Smith wrote:
We are running Polycom 601's. I can't seem to find anything to say one
way or another on this issue, so I figured I would ask. I have call
waiting notification working on the phones when a user is on the phone.
However, is it possible to see the notification on the screen or
On Tue, Sep 12, 2006 at 09:55:17PM -0700, Christopher Corn wrote:
Christopher Corn [EMAIL PROTECTED] wrote:
i've got trixbox installed and grandstream 101 phones.
out of my 4 phones, one of them has call waiting working.
they all the same version of firmware and settings. i tried
well this is my guess :) i had call features (call waiting) enabled on my budgetone 100. i guess when i would dial *70 to enable call waiting, it wasn't reaching my asterisk server. I then turned off call features on my phone then when I would dial *70, I could hear a voice response telling me
i've got trixbox installed and grandstream 101 phones. out of my 4 phones, one of them has call waiting working. they all the same version of firmware and settings. i tried looking in asterisk to see if anything could be doing this, but can't find anything. suggestions?
nevermind i figured it out :)Christopher Corn [EMAIL PROTECTED] wrote:i've got trixbox installed and grandstream 101 phones. out of my 4 phones, one of them has call waiting working. they all the same version of firmware and settings. i tried looking in asterisk to see if anything could be
hi list,
i have tried to set the call waiting function using freePBX but it dosent work. i think there is something wrong with the coding. Has anyone experienced this sort of problems?
___
--Bandwidth and Colocation provided by Easynews.com --
hi list,
i have tried to set the call waiting function using freePBX but it dosent
work. i think there is something wrong with the coding. Has anyone
experienced this sort of problems?
Can you expand a bit more on your problem? What versions of software are
you running? What have you
Hello, is there any way to anounce on agents phone (e.g. beep tone like
in gsm), that some call is waiting in queue?
PJ
___
--Bandwidth and Colocation provided by Easynews.com --
Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit:
I have two call waiting problems.
I have a POTS line into and FXO port
and telephones on an FXS port
1) I can't seem to use the flash button(on the phone) to answer a call
waiting call.
I see the callerid coming though and here the call waiting tone,
but I just can't seem to answer it. The
You have to flash the FXO not your phone, use features.conf to accomplish that.
On 3/27/06, Brad Glonka [EMAIL PROTECTED] wrote:
I have two call waiting problems.
I have a POTS line into and FXO port
and telephones on an FXS port
1) I can't seem to use the flash button(on the phone) to
Brad Glonka wrote:
I have two call waiting problems.
I have a POTS line into and FXO port
and telephones on an FXS port
1) I can't seem to use the flash button(on the phone) to answer a call
waiting call.
I see the callerid coming though and here the call waiting tone,
but I just can't
I realized today that my call waiting isn't working properly. If I am
using the FXS attached phone and a call comes in the FXO, it just goes
directly to voicemail, with no indication (call waiting beep).
If I flash there is a second dial tone, and I can initiate a second
call.
If I am
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Call Waiting x100P and Cisco IP Phone
How can I send the hook flash to the x100P card to switch to the call
coming in from the PSTN?
http://www.voip-info.org/wiki-Asterisk+cmd+Flash
Scroll down to Re: X100P + Call
OK I have looked everywhere and I can't get a clear understanding on how to
do this. If I have an x100P card connected to my home phone line and I am
receiving calls on my Cisco 7940 IP phone with a SIP firmware loaded on it.
How can I send the hook flash to the x100P card to switch to the call
-Commercial Discussion'
Subject: [Asterisk-Users] Call Waiting x100P and Cisco IP Phone
OK I have looked everywhere and I can't get a clear understanding on how to
do this. If I have an x100P card connected to my home phone line and I am
receiving calls on my Cisco 7940 IP phone with a SIP firmware loaded
How can I send the hook flash to the x100P card to switch to the call
coming in from the PSTN?
http://www.voip-info.org/wiki-Asterisk+cmd+Flash
Scroll down to Re: X100P + Call-Waiting how-to
Enjoy.
Nabeel
___
--Bandwidth and Colocation provided by
Hi,
According to the wiki, we need to have both callwaiting=yes and
callwaitingcallerid=yes , and that's what I have in zapata.conf.
I can hear the call waiting alert tone when a 2nd call comes in during
an established call, and I can switch between the calls without
problems. However, CallerID
Hi All,
According to the wiki, we need to have both callwaiting=yes and
callwaitingcallerid=yes , and that's what I have in zapata.conf.
I can hear the call waiting alert tone when a 2nd call comes in during
an established call, and I can switch between the calls without
problems. However,
A simple sql command will do this.
-Original Message-
From: Kerry Garrison [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 22, 2005 1:10 AM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: [Asterisk-Users] Call waiting issue
Whenever I restart Asterisk, I
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Call waiting issue
A simple sql command will do this.
-Original Message-
From: Kerry Garrison [mailto:[EMAIL PROTECTED]
Sent: Tuesday, November 22, 2005 1:10 AM
To: 'Asterisk Users Mailing List - Non
Whenever I restart Asterisk, I then have to go to each
phone and dial *70 to turn call waiting back on so that the multiple lines on
the phones will ring through instead of getting a busy when the user is only on
a single call. Is there a simple way to have call waiting be On by
default?
Hi,
I have callwaiting=yes in my zapata.conf, and Call Waiting Serv: Yes in the PAP2s.
However,there's sitllno callwaitingon the PAP2s. Everything else work fine.
Any ideas? Am I missing something somewhere?
Thank you.
AK
___
--Bandwidth and
Have a look at the CW Act Code: CW Per Call Act Code: and remove the
entries in there. I have a sipura so I dont know if they are
using the same terminology buts it the same hardware.On 10/13/05, Andy Kuo [EMAIL PROTECTED] wrote:
Hi,
I have callwaiting=yes in my zapata.conf, and Call Waiting
Hi,
I can't seem to find CW Act Code: and CW Per Call Act Code: in PAP2.
Does anyone know what they are in PAP2?
thanks.
AK
On 10/13/05, Tom Vile [EMAIL PROTECTED] wrote:
Have a look at the CW Act Code: CW Per Call Act Code: and remove the entries in there. I have a sipura so I dont know if they
Hi all.
Searched the archives but couldn't find anything on this:
I want to track 2nd incoming calls on a single line but don't want to pass the
Call Waiting pips along to the engaged user. IE: I want Asterisk to detect
that CW is currently being transmitted on the line, and track it, but
Hi,
Sorry I can't help you in your questions but actually I have one.
I m using TDM22B card. I am in india.
I want to know are you able to get callerd ID?
What cidsignalling you have set for in zaptel.conf.?
On my system when a call comes it checks for caller ID and returns and error.
Hello
I have couple issues with AAH. 1.5
1. Flash panel doesn't show proper status. Sometime accessing with IP
seems to work and it shows current line status etc. Sometimes accessing
with hostname of the asterisk server seems to show lines, but it doesn't
show off hook etc when we pickup a
I have been looking for the answer to this question for a
while. Google-ing and reading the archives of Asterisk-Users has not
enlightened me.
It seems that this question has been asked many times, and many times it
has gone unanswered.
I have call waiting and three way calling on my
Any ideas on how to disable the audible incoming call beeps
with *. We have a dial pool and if
someone calls into the pilot number and were talking to them, if another call
comes in, both us and the far end users hear the incoming call beep.
Is call waiting supported on an analog incoming line? I have a customer
that has a line with call waiting that wants to go to Asterisk, but
wants to keep the call waiting. If it is, how would I set it up in
asterisk.
Adam Collard
General Manager, ER Wireless
(800) 757-5669 x4861
(810) 496-0161
] [mailto:asterisk-users-
[EMAIL PROTECTED] On Behalf Of Adam Collard
Sent: Friday, 27 May 2005 9:49 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] Call waiting?
Is call waiting supported on an analog incoming line? I have a
customer
that has a line
On Fri, May 27, 2005 9:48 am, Adam Collard wrote:
Is call waiting supported on an analog incoming line? I have a customer
that has a line with call waiting that wants to go to Asterisk,
but wants to keep the call waiting. If it is, how would I set it up in
asterisk.
We have callwaiting=yes
Culhan
Sent: Friday, May 27, 2005 2:29 AM
To: asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users] Call waiting?
On Fri, May 27, 2005 9:48 am, Adam Collard wrote:
Is call waiting supported on an analog incoming line? I have a
customer that has a line with call waiting that wants to go
Is pstn call waiting working on a Digium TDM-400 with FXO ?
Configuration in zapata.conf:
callwaiting=yes
callwaitingcallerid=yes
callprogress=yes
If an incoming call happens while the FXO channel has a call in progress,
and the call is routed to a FXS channel (which has callwaiting=yes in
Hello,
how can i realise a
call waiting signal in extensions.conf
I use VoIP phone
snom 360 and the docs say this phones supports this feature.
Is it implemented
into SIP?
Thanks in
advance
___
Asterisk-Users mailing list
@lists.digium.com
Subject: [Asterisk-Users] call waiting signal
Hello,
how can i realise a call waiting signal in extensions.conf
I use VoIP phone snom 360 and the docs say this phones supports this
feature.
Is it implemented into SIP?
Thanks in advance
Is there a way to enable call waiting by default in asterisk? Every timeI create an extension, it is disabled by default. Having to go to every phone is becoming quite annoying. I havent restarted the server yet, butI am afraid of all my extensions changing back to disabled again. Making it the
Really??
call waiting disalbed? as far as I know there isn't even a function in
asterisk to enable or disable call waiting. There are lots of
workarounds but no function. So you have gone the extra mile to create
such a workaround that (you set it up that way) by default disables
call waiting,
dial *70
check out the handbook for all the feature codes
http://asteriskathome.sourceforge.net/handbook
--- Sascha Ferley [EMAIL PROTECTED] wrote:
Hi,
I am trying to figure out how to setup call waiting
on a [EMAIL PROTECTED]
box. We get the call waiting signal from the telco
and
Hi,
I am trying to figure out how to setup call waiting on a [EMAIL PROTECTED]
box. We get the call waiting signal from the telco and would like to be
able to switch calls.
Our setup right now is as following:
[PSTN] - [EMAIL PROTECTED] - [sip to Cisco ATA 188] - Siemens 8825 (Analog)
When we
Hi,
I am trying to figure out how to setup call waiting on a [EMAIL PROTECTED]
box. We get the call waiting signal from the telco and would like to be
able to switch calls.
Our setup right now is as following:
[PSTN] - [EMAIL PROTECTED] - [sip to Cisco ATA 188] - Siemens 8825 (Analog)
When we
You have to do a flash on the Siemens which gives you * dialtone then Dial
*0 which flashes the line. So the steps are flash *0
- Original Message -
From: Sascha Ferley [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Wednesday, April 20, 2005 6:32 PM
Subject: [Asterisk-Users
I have a pretty simple setup. I have a box running
[EMAIL PROTECTED] with an X100P card and 2 Grandstream BudgeTone-100 phones.
I thought it would be rather simple but I seem to be having a hell of a time
getting call waiting to work. I have come across some solutions in the
mailing list
What is the best way to get call waiting working with a
TDM11B. Ive tried a macro to flash the line, but I never get call
waiting to work completely. Any suggestions?
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
Has anyone had problems with Call Waiting signals causing Zap channel or
bridging hangups in AU.
I was on a call the other day (Zap channel to PSTN) and the call
suddenly hung up on my side. I dialled the calling party and got the
call again, it seems that the bridge had dropped and that the
Has anyone had problems with Call Waiting signals causing Zap channel or
bridging hangups in AU.
I was on a call the other day (Zap channel to PSTN) and the call
suddenly hung up on my side. I dialled the calling party and got the
call again, it seems that the bridge had dropped and that the
This is probably better suited to a cisco forum, but thought i'd drop it
in here also. Using a 7960 with *, and have a very specific need. If the
end user is currently on a call on the 7960, and a new call comes in, i
need the phone to:
show a visual indicator of the call (pref flash the call
@lists.digium.com
Sent: Saturday, February 05, 2005 9:59 PM
Subject: Re: [Asterisk-Users] Call Waiting on X100P
___
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE
- Original Message -
From: Derek Whitten [EMAIL PROTECTED]
To: asterisk-users asterisk-users@lists.digium.com
Sent: Saturday, February 05, 2005 9:59 PM
Subject: Re: [Asterisk-Users] Call Waiting on X100P
___
Asterisk-Users mailing list
Is there any documentation for getting call waiting to work on an x100p?
I have all the callwaiting settings turned on in zapata.conf.
I get the Call Waiting tones coming through when an incoming call comes
in, but when i try to click over to pick up the other call, i just get a
dialtone like i
:37 PM
Subject: [Asterisk-Users] Call Waiting on X100P
Is there any documentation for getting call waiting to work on an x100p?
I have all the callwaiting settings turned on in zapata.conf.
I get the Call Waiting tones coming through when an incoming call comes
in, but when i try to click over
=Asterisk%20cmd%20Flash
You are wanting to flash the zap trunk, not your analog pbx extension.
Lyle
- Original Message -
From: Derek Whitten [EMAIL PROTECTED]
To: asterisk-users asterisk-users@lists.digium.com
Sent: Saturday, February 05, 2005 5:37 PM
Subject: [Asterisk-Users
Thanks for the replies everyone
how do you expect to get the indication that you have a
callwaiting call?
The whole point is I don't want it.
The beep is a guard that hides the
caller-id fsk spill also. So you can't get
callwaiting-callerid and not have a beep.
I don't really need
On Mon, 2005-01-31 at 09:37 +, Alex Barnes wrote:
Thanks for the replies everyone
how do you expect to get the indication that you have a
callwaiting call?
The whole point is I don't want it.
The beep is a guard that hides the
caller-id fsk spill also. So you can't get
Hi all,
Hopefully you can help me.
I want to turn off the audio Call Waiting beep that plays during a call.
I have found the line in the indications.conf for Call Waiting but apart from
setting the frequency to zero or the length to zero is there a proper way to
disable this functionality.
On Sat, 2005-01-29 at 00:00 +, Alex Barnes wrote:
Hi all,
Hopefully you can help me.
I want to turn off the audio Call Waiting beep that plays during a
call.
I have found the line in the indications.conf for Call Waiting but
apart from setting the frequency to zero or the length
assuming a ZAP interface, just set
callwaiting=no
callwaitingcallerid=no
in zapata.conf
Cheers,
Jon.
On Friday 28 January 2005 06:00 pm, Alex Barnes wrote:
Hi all,
Hopefully you can help me.
I want to turn off the audio Call Waiting beep that plays during a call.
I have found the
assuming a ZAP interface, just set
callwaiting=no
callwaitingcallerid=no
in zapata.conf
callwaiting options in zapata.conf are ignored with my tdm
cards and the ol x100p. I set
callwaiting,callwaitingcallerid =no, stop asterisk,unload
modules, reload tdm and zaptel, ztcfg, restart, and I
I have a problem:
When I'm in a call and a second call arrive (call waiting) I can't transfer
the first call. If I press flash the line change to the second call, if I
press flash again the line change to the first call.
How I can transfer a call in this kind of situation ?
Kind regards,
press flash
again you'll conference (the three of you) and if you hang the two calls get
bridged...
bye,
Matt
- Original Message -
From: Miguel [EMAIL PROTECTED]
To: asterisk-users@lists.digium.com
Sent: Monday, January 10, 2005 7:10 PM
Subject: [Asterisk-Users] Call Waiting + Call Transfer
Of Listas
Sent: Monday, January 10, 2005 5:39 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Call Waiting + Call Transfer Problem
Miguel,
you can try using # as a way of transfering the call, but that's a blind
transfer meaning that you will be prompted
HI;
I have an Asterisk with 10 "SIP" ip-phones, our pbx
features are now: Voicemail and Call Transfer.
How can I serve both "Call Waiting / 3 way calling"
for our SIP Phones.?/
Appreciate Any Help
Mohammad
___
Asterisk-Users mailing list
mohammad wrote:
I have an Asterisk with 10 SIP ip-phones, our pbx features are now: Voicemail
and Call Transfer.
How can I serve both Call Waiting / 3 way calling for our SIP Phones.?/
This is what I call one of the dirty little secrets of SIP. On SIP
phones (and H323) all the call control is
I have a small home setup with one Cisco 7960 SIP phone, one WISIP, one
FXO connected to Bell Canada PSTN, and four FXS connected to POTS phones
throughout the house. I also have an account to a SIP based DID provider.
My problem is when I'm on a call on one of the FXS connected phones and
I have purchased the g729 codec from Digium and I'm using it in
conjunction with Cisco 7905 phones.
When a call is placed to an extension which is in use, instead of
sounding the call waiting tone, it causes an error:
-- Executing Dial(SIP/206.XX.XXX.XXX-08f899d8, SIP/204X83|10) in new stack
Hello,
I am having a hard time sending a Flash Hook via my Analog -
SPA-2000 - X100P - POTS connection. Anyone have any suggestions?
When I hit flash-hook on the Analog phone the Sipura intercepts it and
puts the caller on hold. I have no way of sending a flash-hook out the
X100P to
Hi,
I have just set up an Asterisk box.it sure is a big job to get
everything perfect, especially when you have picky users.
Anyway, the box has 2 X100P's and a couple of sipura spa-2000's
connected to the LAN.
1 of the lines connected to the X100P's goes straight to extension 1000
after a
You are supposed to be able to either press flash or quickly push the actual
hook switch.
- Original Message -
From: Nikhil Jogia [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, October 24, 2004 7:54 AM
Subject: [Asterisk-Users] Call Waiting
Hi,
I have just set up an Asterisk
Sent: Sunday, October 24, 2004 6:54 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Call Waiting
Hi,
I have just set up an Asterisk box.it sure is a big job to get
everything perfect, especially when you have picky users.
Anyway, the box has 2 X100P's and a couple of sipura spa-2000's
Of Nikhil Jogia
Sent: Sunday, October 24, 2004 6:54 AM
To: [EMAIL PROTECTED]
Subject: [Asterisk-Users] Call Waiting
Hi,
I have just set up an Asterisk box.it sure is a big job to get
everything perfect, especially when you have picky users.
Anyway, the box has 2 X100P's and a couple
All,
I was just informed by someone that they can hear the call waiting beep
on my phone when I get a second call. Has anyone seen this before, and
is there a way to prevent it? I'm using a Cisco 7940 connected to an *
box, which is connected to a channel bank that terminates my POTS lines
Hello !
We have 7912G SIP phones with the 1.02.00 firmware.
*Sometimes* when you call someone who is already on the phone, our PBX receives
immediatly a 302 Moved Temporarily SIP message, so that the 2nd caller is
forwarded to the voicemail instead of waiting 20s (Allow Call Waiting is set to
1,
Philipp von Klitzing wrote:
How about this pseudo code:
[default]
1,Dial(Sip/1Sip/2)
2,SetVar(foo=x)
3,Goto(international,8500,1)
102,SetVar(foo=x)
103,Goto(international,8500,1)
[international]
8500,1,GotoIf(foo=x THEN voicemail ELSE callotherphones)
Many thanks for the reply, but with
[EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wed, 28 Jul 2004 22:38:41 -0500
Subject: [Asterisk-Users] call waiting, * and FXO
I have been told that the combination of call waiting, * and FXO does and will not work because Asterisk is a PBX. I guess Id like to hear if this is a hard
I have been told that the combination of call waiting, * and
FXO does and will not work because Asterisk is a PBX. I
guess Id like to hear if this is a hard and fast no this will not
work and heres why, or that this currently doesnt work but
with some coding might work.
Id like to have
1 - 100 of 150 matches
Mail list logo