Re: [asterisk-users] Panasonic PBX connect to Asterisk

Dear all, thanks for the help. I'm going to try using E1 gateway to convert sip to e1. -ikka- On Fri, Sep 16, 2016 at 3:28 AM, C F wrote: > Use a sip to PRI gateway or a PRI card in the asterisk system. Connect > that to the Panasonic TDA600 using a PRI card on the

Re: [asterisk-users] Panasonic PBX connect to Asterisk

Use a sip to PRI gateway or a PRI card in the asterisk system. Connect that to the Panasonic TDA600 using a PRI card on the panasonic side (KX-TDA0290). this will be the most worry free solution. On Wed, Sep 14, 2016 at 2:05 AM, Harry McGregor wrote: > Hi, > > > You need

Re: [asterisk-users] Panasonic PBX connect to Asterisk (Ikka Tirtawidjaja)

Dear ikka Thanks, well the best way is by SIP to E1 ISDN gateway (could use Digium, Audiocodes, Sangoma, etc.). But should contemplated on KX-TDA600 ISDN PRI card KX-TDA0290 and configure as QSIG signalling. I don't recommend to use ATA FXS converter, first problem you couldn't dial to any

Re: [asterisk-users] Panasonic PBX connect to Asterisk

Hi, You need to find out more about the configuration of this specific TDA600, as it could be either POTS or E1, once you know that, you can determine what options are best. -Harry On 09/13/2016 10:51 PM, Ikka Tirtawidjaja wrote: Dear Harry, Thx for the explanation. My team manage

Re: [asterisk-users] Panasonic PBX connect to Asterisk

Dear Harry, Thx for the explanation. My team manage building's PBX that use Asterisk 13.x. We use Asterisk PBX for this buildings that have apartment and office customer. >From my Asterisk PBX, we connect to IPPhone (yealink) or ATA Converter (cisco SPA112). Others are using PBX like panasonic

Re: [asterisk-users] Panasonic PBX connect to Asterisk

Hi, On 09/13/2016 06:51 AM, Ikka Tirtawidjaja wrote: Hi, Is there anyone here who has experience connecting Asterisk (ver 13.8) with PBX Panasonic KX-TDA600 ? The architecture more less like this : Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax What

Re: [asterisk-users] Panasonic PBX connect to Asterisk (Ikka Tirtawidjaja)

Dear Mc Grath R, Thx for the information. If that TDA-600 can not use SIP Trunking, can we use "SIP to E1 converter/gateway" between my Asterisk Server and Panasonic KX-TDA600 ? or from asterisk we convert the sip phone line with ATA Converter / FXS Gateway, and then we connect the output

Re: [asterisk-users] Panasonic PBX connect to Asterisk (Ikka Tirtawidjaja)

Panasonic PBX KX-TDA600 it doesn't support SIP protocol for VoIP technology it only support H323 Trunk through 4 or 16 channels gateway card and TDM technology with ISDN BRI and PRI card. Mc GRATH Ricardo -- _ -- Bandwidth

[asterisk-users] Panasonic PBX connect to Asterisk

Hi, Is there anyone here who has experience connecting Asterisk (ver 13.8) with PBX Panasonic KX-TDA600 ? The architecture more less like this : Telco Sip Trunk ---> Asterisk 13 ---> Panasonic KX-TDA600 ---> Phone / Fax Thanks in advance, Regards, Ikka - Jakarta, Indonesia --