PCI Express x1 card will work and will fit in the x8 slot
PCI-X slots are usually 3.3V
Martin
On Mon, Sep 7, 2009 at 10:35 AM, mancyb...@gmail.com wrote:
> On Mon, 7 Sep 2009 08:48:25 -0500
> "Juan Cardoza" wrote:
>
>> Hello
>>
>> What is your Asterisk problem?, may be I can help you...
>> I ha
On Mon, 7 Sep 2009 08:48:25 -0500
"Juan Cardoza" wrote:
> Hello
>
> What is your Asterisk problem?, may be I can help you...
> I had configure a T1 Card TE121 connected with and AVAYA PBX
> Best regards
Hi Juan,
thanks for your help.
I'm going to choose a 4 ports PRI digium card for this serv
Hello
What is your Asterisk problem?, may be I can help you...
I had configure a T1 Card TE121 connected with and AVAYA PBX
Best regards
-Mensaje original-
De: asterisk-users-boun...@lists.digium.com
[mailto:asterisk-users-boun...@lists.digium.com] En nombre de
mancyb...@gmail.com
Enviad
> does Digium provide a service support for a compatibility question
about
> their PRI hardware ?
Before you open a call with them, you will have to register your Digium
card by entering the serial number. The serial number is printed on a
sticker which is attached to the card. There is no way
On Sun, Sep 6, 2009 at 10:33 AM, mancyb...@gmail.com wrote:
> Hi All,
>
> does Digium provide a service support for a compatibility question about
> their PRI hardware ?
>
> Thanks and have a nice day.
>
>
They do support their cards. Why not call and find out?
--
Senior Systems and Network Adm
Do a 'make menuselect' when you install zaptel driver and make sure in
the 'Binary Firmware Package' either ' FIRMWARE-OCT6114-064' or '
FIRMWARE-OCT6114-128' is selected depending on which echo cancellation
module you have. If you are unsure select both.
Remi
Klaverstyn, David C wrote:
>
>
Cory Andrews wrote:
To get an accurate portrayal of defect rate, a very large sample size
will obviously result in a more accurate calculation. I calculated a
defect rate of between 1-2% for Digium products, based on an arbitrary
sample size of 5000 units. These included “ALL” Digium products
- 716.907.4059
aim - B2Cory
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Cory Andrews
Sent: Friday, June 30, 2006 3:17
PM
To: 'Asterisk
Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users]
Digium Hardware Reliability
I’m working on quan
PROTECTED]
m - 716.907.4059
aim - B2Cory
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Philippe Lindheimer
Sent: Friday, June 30, 2006 3:04
PM
To:
asterisk-users@lists.digium.com
Subject: Re: [Asterisk-Users]
Digium Hardware Reliability
Andrew,
you seem to be
s are finding.pFrom: Andrew Kohlsmith <[EMAIL PROTECTED]>To: asterisk-users@lists.digium.comDate: Fri, 30 Jun 2006 08:49:07 -0400Subject: Re: [Asterisk-Users] Digium Hardware Reliability On Friday 30 June 2006
02:24, Philippe Lindheimer wrote:> I would love to see some feedback on this as w
On Friday 30 June 2006 02:24, Philippe Lindheimer wrote:
> I would love to see some feedback on this as well. I've lost exact count
> now, but think I've seen about 5-6 failures on their cards TDM400P and
> TDM2400P cards, mostly FXO but in once case FXS. And I don't deal with that
Then put proper
On Thursday 29 June 2006 21:38, M.Hockings wrote:
> How reliable is Digium hardware in general.? My new TDM400P just died.
I have a number of Digium T1 products (T100P, TE410P, TE405P and TE406P) as
well as a few TDM400 based boards. No failures in the last 2 years or so.
> So, at over 2x the
M.Hockings wrote:
How reliable is Digium hardware in general.? My new TDM400P just died.
I am trying to determine if I have a lemon. This a new PC with a Digium
TDM400P in it with a single FXO and single FXS card just stopped working
today. It has been running less than three weeks with the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Philippe Lindheimer wrote:
> I would love to see some feedback on this as well. I've lost exact
> count now, but think I've seen about 5-6 failures on their cards
> TDM400P and TDM2400P cards, mostly FXO but in once case FXS. And I
> don't deal with t
I would love to see some feedback on this as well. I've lost exact count now, but think I've seen about 5-6 failures on their cards TDM400P and TDM2400P cards, mostly FXO but in once case FXS. And I don't deal with that many systems, which makes this really concerning. I've started a thread on the
M.Hockings wrote:
Today the power went
out due to a mis-configuration on my part the UPS shut down before the
machine shut down. Now, I would not think this should be a problem but
the Digium card no longer responds. lspci does not show it either so I
presume it dead
While I don't use t
How reliable is Digium hardware in general.? My new TDM400P just died.
I haven't had a Digium card go bad yet that I did not expect to go bad. By
this I mean in the 100+ cards that I have installed, the only ones that have
gone bad have been in servers that didn't have enough ventilation
Hello,
The 5 exchange lines I assume they are analogic. For them you will need 5
FXO ports. You can buy a TDM04B and a TDM01B (this will get you to the 5
FXO). Make sure you have 2 PCI slots available.
Now for the extensions you need
- IP Phones
or
- ATAs (if you want to reuse your analog pho
Move to PRI - it will be much more fun than working
with analog.
PaulH
- Original Message -
From:
Cisco - Kameko
To: asterisk-users@lists.digium.com
Sent: Wednesday, January 25, 2006 6:17
PM
Subject: [Asterisk-Users] Digium
hardware
Hello,
I w
Rod Bacon wrote:
Do the echo cancellation settings in zapata.conf have any effect when
hardware echo cancellation is installed on a 406p/411p?
The only setting that has any effect is enabled/disabled.
How can I tell if the echo is being cancelled by hardware or software?
The software echo c
David J Carter wrote:
Nigel,
Should really be on the biz list for this, but Telappliant sells Digium
hardware.
Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Nigel
Taylor
Sent: 05 March 2005 21:30
To: Asterisk Users Mailing List - Non-Commercial Discussi
Nigel,
Should really be on the biz list for this, but Telappliant sells Digium
hardware.
Dave
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Nigel
Taylor
Sent: 05 March 2005 21:30
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [Asteri
| Date: Tue, 14 Dec 2004 13:09:00 -0600
| From: Adi Linden <[EMAIL PROTECTED]>
|
| I am looking for a supplier of Digium hardware in Canada. Any suggetions?
At the risk of self-promotion, I'll mention that we've been an
"official" Digium reseller since about June 2003, and I'd be more
than happy
On Tue, 2004-14-12 at 13:09 -0600, Adi Linden wrote:
> I am looking for a supplier of Digium hardware in Canada. Any suggetions?
Send an email over to us with detials of what you require:
[EMAIL PROTECTED] .
Regards,
Ranbir
--
Kanwar Ranbir Sandhu
Systems Aligned Inc.
www.systemsaligned.com
__
http://cylogistics.comtelligence.net/cgi-bin/evoque?cylogistics.id+1022883278+1022883327+1022883383
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
http
On Tue, 2004-12-14 at 11:09, Adi Linden wrote:
> I am looking for a supplier of Digium hardware in Canada. Any suggetions?
>
Other coast, but http://www.netvoice.ca/digium/
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
http://lists.digium.com/mail
Email me direct and I will make sure you get a great deal.
Brandon Patterson [EMAIL PROTECTED]
LiveVoip LLC
* We are going allow our customers to buy from us for the price we pay plus
shipping/handling.
Our company considers items like this the tools required to make a business
go!
- Origin
Michael Giagnocavo [EMAIL PROTECTED] wrote:
> > > Yo estoy armando un Asterisk pero el PSTN Gateway es un CIsco 2610.
> > > Has tenido buenos resultados con la E1 directamente en el Linux? Te
> > > demande mucho hardware?
> >
> > Le metimos mucho hard para estar seguros (usamos 729, q come MUCHO)
>> Yo estoy armando un Asterisk pero el PSTN Gateway es un CIsco 2610.
>> Has tenido buenos resultados con la E1 directamente en el Linux? Te
>> demande mucho hardware?
>
>Le metimos mucho hard para estar seguros (usamos 729, q come MUCHO)
Como que tanto hardware usaste? Dual Xeon 3Ghz o...? Y de
> Yo estoy armando un Asterisk pero el PSTN Gateway es un CIsco 2610.
> Has tenido buenos resultados con la E1 directamente en el Linux? Te
> demande mucho hardware?
Le metimos mucho hard para estar seguros (usamos 729, q come MUCHO)
> Gracias...
> Nahuel Ramos.
Saludos,
Yo estoy armando un Asterisk pero el PSTN Gateway es un CIsco 2610.
Has tenido buenos resultados con la E1 directamente en el Linux? Te
demande mucho hardware?
Gracias...
Nahuel Ramos.
On Tue, 2 Nov 2004 13:31:37 -0300, Horacio J. Peña
<[EMAIL PROTECTED]> wrote:
> > Gracias por el dato. Una
Yes, I have placed two orders for TDM04B cards and I ran in to issues
both times.
> -Original Message-
> From: [EMAIL PROTECTED] [mailto:asterisk-users-
> [EMAIL PROTECTED] On Behalf Of Cirelle Enterprises
> Sent: Wednesday, September 22, 2004 10:14 AM
> To: [EMAIL PROTECTED]
> Subject: [
Jeff Borders [EMAIL PROTECTED] wrote:
> I'm very interested in the Digium/Asterisk combination but need some
> clarification. I would like to setup a SOHO for business and home use.
>
> Scenario One:
> I have one analog line, 4 analog telephones.
> Do I need a TDM400P + 4 FXS modules (Green) + X1
The second one is the better option. the x100p are more for home than
for homeoffice use :)
On Wed, 2004-08-18 at 07:06, Jeff Borders wrote:
> Hello folks,
>
> I'm very interested in the Digium/Asterisk combination but need some
> clarification. I would like to setup a SOHO for business and home
34 matches
Mail list logo
