2006/11/1, Armin Schindler [EMAIL PROTECTED]:
On Wed, 1 Nov 2006, Pedro Silva wrote:
As you can see in the log below, the called number is just '0':
CalledPartyNumber = 810
It seems DDI 0 of your line was called. So just do
exten = 0,n,Dial...
Armin
Is that right! Thanks!
Hello,
The problem was wrong contexts defined like Marco said, and is solved.
Now, i have another problem...of course :)
On incoming calls, i only can receive calls if i define a line like
the following, in extensions.conf:
exten = _.,n,Dial(SIP/500,30,tr) (all incoming calls are redirected
to
On Wed, 1 Nov 2006, Pedro Silva wrote:
Hello,
The problem was wrong contexts defined like Marco said, and is solved.
Now, i have another problem...of course :)
On incoming calls, i only can receive calls if i define a line like
the following, in extensions.conf:
exten =
On Tue, 31 Oct 2006, Pedro Silva wrote:
Hello,
One problem is solved and another appears... :(
I cannot receive incoming calls on trixbox. I defined one incoming
route (any DID/any CID) and forwading these calls to a SIP extension.
With capi and sip debug in asterisk -r console i dont
Hi Pedro,
pls post your capi.conf! I'm not used with CAPI, but should have something like:
[interfaces]
incomingmsn=* ; Here you match MSNs arriving from telco, for debug
let it ' * '
controller=1
softdtmf=1
accountcode=
context=demo ;Set this to ext-did that should be the context
TRIXBOX
Hello,
One problem is solved and another appears... :(
I cannot receive incoming calls on trixbox. I defined one incoming
route (any DID/any CID) and forwading these calls to a SIP extension.
With capi and sip debug in asterisk -r console i dont detect any
incoming activity...
In xlog console i
Pedro Silva ha scritto:
Hello,
I need to connect one diva server 4bri to a portuguese BRI interface.
The operator (PT) said that this bri is in point-to-multipoint mode
(S0). Previously one PBX has connected to that interface.
The asterisk and diva drivers are working ok but i cannot
Thanks Alberto!
I tested with telsampl like you said (with various configurations for
de diva) and this not works...:(
The trace is:
Enter destination address: 273xx
--Conn_Req(273xx)
Connect_Con--
[29]:Disc_Ind--
--Disc_Res
**Call cleared***
Any idea for the possible
pls post your misdn.conf as well as extensions.confMay be i can help.Sou Português:)On 10/29/06, Pedro Silva
[EMAIL PROTECTED] wrote:Thanks Alberto!I tested with telsampl like you said (with various configurations for
de diva) and this not works...:(The trace is:Enter destination address:
Marco Mouta ha scritto:
pls post your misdn.conf as well as extensions.conf
May be i can help.
Sou Português:)
On 10/29/06, *Pedro Silva* [EMAIL PROTECTED]
mailto:[EMAIL PROTECTED] wrote:
Thanks Alberto!
I tested with telsampl like you said (with various configurations for
de
Olá Marco! :)
2006/10/29, Marco Mouta [EMAIL PROTECTED]:
pls post your misdn.conf as well as extensions.conf
The asterisk version that i used with trixbox dont't have
misdn.conf... I used capi.conf.
For now, i dont care about asterisk, because with the divas utility
telsampl i know that the
Hello again Alberto!
Anyway, to get more info, try to open a second shell
and run /usr/lib/eicon/divas/xlog
then on the first shell redo the telsampl test, then
post the output of xlog off the list to my address
(alberto at msoft-italia.com)
This is the xlog output:
4:1736:074 - CREATEID ok:
Finally this works!!! :)
Tanks to Alberto and Marco by your help!
The problems are:
- the cable was connected to the wong card port... :(
- the card config needs to be: ETSI; TE; Point-to-Point (I thought
that was point-to-multipoint).
Best regards,
PS.
2006/10/29, Pedro Silva [EMAIL
13 matches
Mail list logo