[asterisk-users] Can't start Asterisk after installing Digium G729 licence

Hi, I carefully followed instructions in README file lasting with : /root/register ... blabla asterisk -r CLI> restart now Then asterisk -r fails with : # asterisk -r Asterisk 1.6.1-beta4, Copyright (C) 1999 - 2008 Digium, Inc. and others. Created by Mark Spencer Asterisk comes with ABSOLUTELY N

[asterisk-users] hangup problem(for spa400)

Hi all, I have asterisk connected to my voice application server. Asterisk is connected and registering to a linksys spa400 box. I am running an application on a perticular extention (141). Here is a snip from my extensions.conf... exten => spa400,s,MyApp(/etc/asterisk/MyAppConfig.conf) exten

Re: [asterisk-users] Reading/Writing the Astdb

On Mon, Jan 26, 2009 at 06:31:30PM -0800, Steve Edwards wrote: > On Mon, 26 Jan 2009, cbbs...@hotmail.com wrote: > > > That's a really good idea, however, I am having problems getting it to > > work. I tried the following: > > > > echo -n "asterisk -rx \"database put FOO BAR 1\" " | socat - >

[asterisk-users] Help with cdr_odbc

I have having a hard time setting the cdr with cdr_odbc. Below is all my conf file related to it, let me know what I am doing wrong. Thank you. *cdr.conf* [general] enable=yes [csv] usegmtime=yes; log date/time in GMT. Default is "no" loguniqueid=yes ; log uniqueid. Default is "no" logus

Re: [asterisk-users] Reading/Writing the Astdb

On Mon, 26 Jan 2009, cbbs...@hotmail.com wrote: > That's a really good idea, however, I am having problems getting it to > work. I tried the following: > > echo -n "asterisk -rx \"database put FOO BAR 1\" " | socat - > /var/run/asterisk/asterisk.ctl > > and > > echo -n "asterisk -rx \"database

Re: [asterisk-users] Reading/Writing the Astdb

At 8:48 PM on 26 Jan 2009, cbbs...@hotmail.com wrote: > > Tzafrir; >That's a really good idea, however, I am having problems getting > it to work. I tried the following: > > echo -n "asterisk -rx \"database put FOO BAR 1\" " | socat > - /var/run/asterisk/asterisk.ctl > > and > > echo -n "

Re: [asterisk-users] Reading/Writing the Astdb

Tzafrir; That's a really good idea, however, I am having problems getting it to work. I tried the following: echo -n "asterisk -rx \"database put FOO BAR 1\" " | socat - /var/run/asterisk/asterisk.ctl and echo -n "asterisk -rx \"database put FOO BAR 1\" " | socat - UNIX-CONNECT: /var/run/

Re: [asterisk-users] Network Card

Solved. Here is the Solution : http://www.centos.org/modules/newbb/viewtopic.php?topic_id=18299&start=0#forumpost66716 On Mon, Jan 26, 2009 at 6:23 PM, David @ULC wrote: > Sorry, but any further help > with > http://l

Re: [asterisk-users] German date format in voicemail emails

On Monday 26 January 2009 08:21:10 am Danny Nicholas wrote: > Did you read the source for app_voicemail? Line 239 says you have to set > locale in the config and have the sound file einE. Of course an easier way > would be to locate the 19 day and month files and just replace them with > German e

Re: [asterisk-users] I need help

Bayardo you need to ask questions but exact, nobody has a glass ball to help you regardss rickygm > 2009/1/26 Bayardo Sanchez >> >> i have a problem need help >> >> == Spawn extension (DLPN_everything, 2095773777, 2) exited non-zero on >> 'SIP/8022-b7225740' >> -- Got SIP response 503 "Ser

Re: [asterisk-users] I need help

There are no good Mexican restaurants near my house. PaulH Jose P. Espinal wrote: > And your problem is... ? > > > Bayardo Sanchez wrote: > >> i have a problem need help >> >> == Spawn extension (DLPN_everything, 2095773777, 2) exited non-zero on >> 'SIP/8022-b7225740' >> -- Got SIP res

Re: [asterisk-users] I need help

and what is your problem? if your email is shorter than your signature maybe you forgot something. David 2009/1/26 Bayardo Sanchez > i have a problem need help > > == Spawn extension (DLPN_everything, 2095773777, 2) exited non-zero on > 'SIP/8022-b7225740' > -- Got SIP response 503 "Service

Re: [asterisk-users] I need help

And your problem is... ? Bayardo Sanchez wrote: > i have a problem need help > > == Spawn extension (DLPN_everything, 2095773777, 2) exited non-zero on > 'SIP/8022-b7225740' > -- Got SIP response 503 "Service Unavailable" back from 74.63.41.218 > -- SIP/voipms4-09ab0c38 is circuit-busy >

Re: [asterisk-users] Document with differences between 1.2, 1.4 and 1.6?

On 16:28, Mon 26 Jan 09, Carlos Chavez wrote: > Is there a bullet type document with the features each version of > Asterisk has? I know you can read the CHANGES file but that is not > something you give a customer. I just need a one or two page document > with bullet points showing the fea

Re: [asterisk-users] General Asterisk SIP/IAX provider question

Doesn't this belong on the biz list?? Sure hope their service is better than their web site Peg Leg O'Brien Thomas Mullins wrote: > > Most thanks, > > > > I am there now. > > > > Shane > > > > > > > > *From:* aster

[asterisk-users] Document with differences between 1.2, 1.4 and 1.6?

Is there a bullet type document with the features each version of Asterisk has? I know you can read the CHANGES file but that is not something you give a customer. I just need a one or two page document with bullet points showing the features added from 1.2 to 1.4 and from 1.4 to 1.6. An

[asterisk-users] I need help

i have a problem need help == Spawn extension (DLPN_everything, 2095773777, 2) exited non-zero on 'SIP/8022-b7225740' -- Got SIP response 503 "Service Unavailable" back from 74.63.41.218 -- SIP/voipms4-09ab0c38 is circuit-busy == Everyone is busy/congested at this time (1:0/1/0) == Aut

Re: [asterisk-users] Dial weirdness

Bruce Ferrell wrote: > I'm seeing this response to SIP calls originated in the following manner: > > Dial(SIP/${EXTEN}&SIP/{$DID},30,r) > > handle_response_invite: Re-invite to non-existing call leg on other UA. > > The response is from the second part of the dial. What exactly does it > m

Re: [asterisk-users] Dahdi Init script for Suse?

On Sat, Jan 24, 2009 at 04:08:53PM -0500, Joshua Kinard wrote: > Anyone by chance got an Init script for /etc/init.d/dahdi on a SLES 10 > box that'll work right? The one included by default only deals with > debian and redhat, and the changes between the old zaptel script I > have that works ar

[asterisk-users] Dial weirdness

I'm seeing this response to SIP calls originated in the following manner: Dial(SIP/${EXTEN}&SIP/{$DID},30,r) handle_response_invite: Re-invite to non-existing call leg on other UA. The response is from the second part of the dial. What exactly does it mean and how can I fix it? Thanks in

Re: [asterisk-users] Dahdi Init script for Suse?

Nah, not using RPMs. This is a from-source build. Part of the problem is, I'm running Novell's Open Enterprise Server, which is SLES 10.1 (I think) with Novell's OES2 Overlay on top. So the Asterisk RPMs available for that revision of SLES weren't usable for me (they had 1.2 available, and I

Re: [asterisk-users] Dahdi caused Kernel to segfault

On Mon, Jan 26, 2009 at 08:53:11PM +, Rony Ron wrote: > Hi > the same happened here also with different distros (ubuntu and fedora 9) > each time i run "dahdi start" the kernel crash. What exactly do you mean by "crash"? An error, or the system completely crashes / hangs? > i was using the

Re: [asterisk-users] Dahdi caused Kernel to segfault

Hi the same happened here also with different distros (ubuntu and fedora 9) each time i run "dahdi start" the kernel crash. i was using the dahdi from trunk regards, David fire a écrit : > do you have any dahdi card ??? > if not edit /etc/dahdi/modules so it dosent load any modules. > David > > 2

Re: [asterisk-users] General Asterisk SIP/IAX provider question

Most thanks, I am there now. Shane From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Jai Rangi Sent: Monday, January 26, 2009 2:25 PM To: Asterisk Users Mailing List - Non-Commercial Discussio

Re: [asterisk-users] General Asterisk SIP/IAX provider question

Shane, You can try, www.didforsale.com. We allow free testing with no purchase required. See what others are saying, http://www.didforsale.com/blog/?p=103 -Jai On Mon, Jan 26, 2009 at 11:12 AM, Thomas Mullins wrote: > My coworker and I have built an Asterisk box. Everything went well, now >

[asterisk-users] General Asterisk SIP/IAX provider question

My coworker and I have built an Asterisk box. Everything went well, now we are ready to hook the box to a SIP/IAX provider. Does anyone have recommendation on choosing a vendor? We are located in Virginia. Thanks Shane ___ -- Bandwidth and Col

Re: [asterisk-users] custom cdr userfiled

Pezhman Lali writes: > so great, I am using odbc . > but I can not find custom_odbc . > is any keywords or links to useful documents? Top posting is annoying. cdr_adaptive_odbc is what you want. It's available in 1.6.x, and there's a backport for 1.4.x. I haven't tried the backport, but it work

Re: [asterisk-users] Network Card

Here is the content of modprobe.conf : alias eth1 skge alias scsi_hostadapter ata_piix alias snd-card-0 snd-hda-intel options snd-card-0 index=0 options snd-hda-intel index=0 remove snd-hda-intel { /usr/sbin/alsactl store 0 >/dev/null 2>&1 || : ; }; /sbin/modprobe -r --ignore-remove snd-hda-intel _

Re: [asterisk-users] CDR 0.00 duration

On Wed, 2009-01-21 at 15:45 +0530, Sriram wrote: > Hi > > I am using Trixbox 2.4 and PRI lines..on the CDR i see many calls that > have duration of 0 seconds, but they are still shown as ANSWERED . how > come its possible when duration is 0.00 ? Are the callers billed for > such calls ? > > Rgds

[asterisk-users] goto iax problem

Dear, the goto function to the iax dialing, makes bill duration and call duration wrong, in cdr.they are equal to ringing time. the cdr will be produced and saved into the dbase, when the callee picks up the phone. is any way to have real duration time ? [main] exten => _1X.,1,GOTO(LOPL,${EX

Re: [asterisk-users] Auto Detect

on CentOS you can use lshal to return which driver is in use... e.g. lshal -s |grep pci_ |xargs -n1 lshal -l -u |grep -E "udi|info.product|info.linux.driver" get's a list of items, filters on pci, gets the long output for those pci devices and outputs lines containing udi, info.product and info.

Re: [asterisk-users] Ntework Card

This is still very off topic... Someone's already suggested you look to somewhere for centos help... if you had, you'd have found this... http://www.centos.org/modules/newbb/viewtopic.php?forum=39&topic_id=10098 Which is an RPM containing an update driver, so you wouldn't have to mess about polut

Re: [asterisk-users] Strange Cisco/Asterisk anomaly

Another possible "workaround/hack" (since this is an older *) would be to do a cron "asterisk -rx "restart when convenient" " for around midnight local time each day just to "clear the cobwebs". Unless something was really hosed, this would clean up things faster and easier than a server restart.

Re: [asterisk-users] Strange Cisco/Asterisk anomaly

On Mon, 26 Jan 2009, Danny Nicholas wrote: > You've tried a "sip reload" from CLI and rebooted the phones? > Been there, done that. Rebooted the phones manually, switches manually, wiresharked for anomalies, nothing out of the ordinary. Since as stated there was an outage, the server maintained

Re: [asterisk-users] Suggestion for a new server for E1 line

On Mon, 26 Jan 2009, Marco Signorini wrote: > Hi All, > > I'm trying to identify a new server as a replacement for what our > customer actually has (DELL PowerEdge 860). > The server will mount the Digium board TE121, we already have, with echo > cancel onboard. I need to know if someone could sug

Re: [asterisk-users] Strange Cisco/Asterisk anomaly

You've tried a "sip reload" from CLI and rebooted the phones? -Original Message- From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of J. Oquendo Sent: Monday, January 26, 2009 8:51 AM To: asterisk-users@lists.digium.com Subject: [aster

[asterisk-users] Strange Cisco/Asterisk anomaly

Hey all, having an extremely odd issue wondering if anyone else has come across or seen something similar and what your resolution was. I have Asterisk 1.2.12.1 running (don't ask) on a machine. All has been working fine for months on end. The system has a mixture of Polycom, Snom's and Cisco 7960

Re: [asterisk-users] Passing DTMF

I have had this same problem using via:talk. Even though they tell me they have hundreds of people using Asterisk with their service that have no problems we cannot make it work. I have also had reponses confirming that in this email list. So don't wast your time with via:talk. Christopher

[asterisk-users] Suggestion for a new server for E1 line

Hi All, I'm trying to identify a new server as a replacement for what our customer actually has (DELL PowerEdge 860). The server will mount the Digium board TE121, we already have, with echo cancel onboard. I need to know if someone could suggest a new server that's compatible with this board. Wit

Re: [asterisk-users] Auto Detect

Just to reply to myself and top post in the process. Its seems this is not the case on CentOS systems my earlier post was the part of the output from a box running Debian Lenny. lspci -v on a CentOS-5.1 box shows neither Kernel driver in use or Kernel modules. Bails bails wrote: > Probably no

Re: [asterisk-users] * Queues with legacy pbx extensions ?

hi we ALWAYS use sip phone *<-E1->pstn or sip phone<-IP->*<-E1->legasypbx<-?-> pstn we use the digiums cards whit echo canceller and we havent any echo problem. more than 20 or 30 installations. whit almost every provider in the country. dont be SO scared. David 2009/1/26 Sriram > Hello Ever

Re: [asterisk-users] German date format in voicemail emails

Did you read the source for app_voicemail? Line 239 says you have to set locale in the config and have the sound file einE. Of course an easier way would be to locate the 19 day and month files and just replace them with German equivalents (assuming that 26 and 2009 sound the same in a German pro

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

2009/1/26 Benoit > Olivier a écrit : > > Anyway, according your own experience, how frequent is this PTP case ? > I can't say, i don't have any other experience than our own lines > > That's the point : as much as possible, we're trying to avoid any > > re-configuration of legacy equipment. > > >

Re: [asterisk-users] Vicidialnow

You can download the free manuals and buy the full paid-for manuals at: http://www.eflo.net MATT--- On 1/26/09, David fire wrote: > where i can buy the vicidial manual? > thanks > David > > 2009/1/26 ram > > > > > > > > > > > > > > > > On 1/23/09, David @ULC wrote: > > > > > > > > > But after

Re: [asterisk-users] Vicidialnow

The astguiclient/VICIDIAL project is very much alive. There were several updates to the 2.0.4 release put out over the last year and we have actually been so busy and so much has changed in the development trunk that we have not had time to put out a full proper release. The latest stable code is o

Re: [asterisk-users] Auto Detect

lspci -v RETURNS me : ___ 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) Subsystem: Intel Corporation Unknown device d701 Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information 0

[asterisk-users] * Queues with legacy pbx extensions ?

Hello Everybody I am using Trixbox 2.4 (with TE420P & PRI lines) .. my setup is like Calls -->Asterisk-->legacy pbx--->analog extensions(agents). Whenver a call comes in , asterisk dials the ACD number of the legacy pbx which in turn decides to route to appropriate agent.. for ex : s,1,Dial(ZAP

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

Olivier a écrit : > Anyway, according your own experience, how frequent is this PTP case ? I can't say, i don't have any other experience than our own lines > That's the point : as much as possible, we're trying to avoid any > re-configuration of legacy equipment. > > So, how would you order TE/NT,

Re: [asterisk-users] Auto Detect

Probably not much use to you in this instance, but its always nice to know that lspci -v prints the kernel driver in use and kernel modules. e.g. 10:00.0 Ethernet controller: Broadcom Corporation NetLink BCM5787M Gigabit Ethernet PCI Express (rev 02) Subsystem: Hewlett-Packard Company D

Re: [asterisk-users] Auto Detect

You seem to have two network devices in that system: intel, probably onboard dlink, probably a pci or pci-express card one is working fine, the other is not. This is usually a kernel driver problem you will need to work out. Check out the CentOS forums to see whether your dlink card is supported b

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

Tzafrir, Personally, how would you classify most needed BRI modes, from most valuable to least valuable (see other posts in this thread) ? ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRI

Re: [asterisk-users] Auto Detect

you have asked several questions that have little or nothing to do with asterisk. Perhaps you should purchase some consulting time from a linux admin, join your local Linux Users Group, or at least ask your questions in a newbies forum for the version of linux you have chosen... If you insist on d

Re: [asterisk-users] Auto Detect

lspci ~ 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 82G35 Express Integrated Graphics Controller (rev 03) 00:02.1 Display controller: Intel Corporation 82G35 Express Integrated Gr

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

2009/1/26 Tzafrir Cohen > On Mon, Jan 26, 2009 at 11:09:35AM +0100, Olivier wrote: > > 2009/1/26 Stelios Koroneos > > > > > > > > > > > > > So my opinion is that these NT-PTMP is really and urgently needed, > > > > especially if this TEI management is rather complex and therefore > > > > would t

Re: [asterisk-users] Auto Detect

try lspci 2009/1/26 Tzafrir Cohen > On Mon, Jan 26, 2009 at 01:45:56PM +0100, Philipp Kempgen wrote: > > Tzafrir Cohen schrieb: > > > On Mon, Jan 26, 2009 at 05:24:03PM +0530, David @ULC wrote: > > >> Which command to run which will auto detect all hardwares present in > the > > >> system ? > >

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

2009/1/26 Benoit > Olivier a écrit : > > From my point of view, the most important feature is TE-PTMP as this > > the one used here (in France) when connecting a new Asterisk-based > > IPBX to ISDN (I really don't know why TE-PTP is not used for that). > Well this may depend of some parameter. We

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

2009/1/26 Benoit > Olivier a écrit : > > From my point of view, the most important feature is TE-PTMP as this > > the one used here (in France) when connecting a new Asterisk-based > > IPBX to ISDN (I really don't know why TE-PTP is not used for that). > Well this may depend of some parameter. We

Re: [asterisk-users] German date format in voicemail emails

Philipp Kempgen schrieb: > Klaus Darilion schrieb: >> I want to configure voicemail to send emails with the date of the >> message in German/Austria, that means: >> >> "Montag, 26 Jänner 2009" instead of "Monday, 26 January 2009" >> >> voicemail.conf refers to "man strftime". This refers to the

Re: [asterisk-users] Auto Detect

On Mon, Jan 26, 2009 at 01:45:56PM +0100, Philipp Kempgen wrote: > Tzafrir Cohen schrieb: > > On Mon, Jan 26, 2009 at 05:24:03PM +0530, David @ULC wrote: > >> Which command to run which will auto detect all hardwares present in the > >> system ? > > > Hardware of what type? > > The OP clearly sai

[asterisk-users] Network Card

Sorry, but any further help with http://lists.digium.com/pipermail/asterisk-users/2009-January/225548.html ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com --

Re: [asterisk-users] Dahdi caused Kernel to segfault

someone change the top posting complains emails to sarcastic mails??? David 2009/1/26 Tzafrir Cohen > On Sun, Jan 25, 2009 at 08:59:16PM -0200, David fire wrote: > > you dont have dahdi properly installed. > > did you install BOTH dahdi utils and dahdi modules > > Wow, you finally realized t

Re: [asterisk-users] Auto Detect

Tzafrir Cohen schrieb: > On Mon, Jan 26, 2009 at 05:24:03PM +0530, David @ULC wrote: >> Which command to run which will auto detect all hardwares present in the >> system ? > Hardware of what type? The OP clearly said *all* hardware. :-) Philipp Kempgen -- AMOOCON 2009, May 4-5, Rostock /

Re: [asterisk-users] Digium TE220 card partially detected

On Mon, Jan 26, 2009 at 03:08:13PM +0300, Maxim Litnitskiy wrote: > Hello folks. > I've got a strange issue. > When I modprobe TE220 I do not see mesages like Launching card: 0 <..> > Setting up global serial parameters. > You can see how I loaded and unloaded the card for several times - > http://

Re: [asterisk-users] Auto Detect

On Mon, Jan 26, 2009 at 05:24:03PM +0530, David @ULC wrote: > Which command to run which will auto detect all hardwares present in the > system ? > OS : CentOS > Running Asterisk Hardware of what type? For Zaptel/DAHDI: zapconf / dahdi_genconf . -- Tzafrir Cohen icq#16849755

Re: [asterisk-users] Vicidialnow

the vicidial proyect is alive? the last stable releace is from 2007 thanks David 2009/1/26 David fire > where i can buy the vicidial manual? > thanks > David > > 2009/1/26 ram > >> >> >> On 1/23/09, David @ULC wrote: >>> >>> >>> >>> But after installing it with CD , I guess we have to change S

[asterisk-users] Digium TE220 card partially detected

Hello folks. I've got a strange issue. When I modprobe TE220 I do not see mesages like Launching card: 0 <..> Setting up global serial parameters. You can see how I loaded and unloaded the card for several times - http://asteriskpbx.ru/pastebin/11 lspci can detect the card: 03:08.0 Communication c

Re: [asterisk-users] Start asterisk on boot

2009/1/26 Ralf Träskman > Hi > > > > We runs asterisk 1.6 on a ubuntu 8.04 server. > > How can I get asterisk to start at boot? > > I have created an file named asterisk in /etc/event.d and put in this > > > > ># This service maintains Asterisk from the point the system is ># started unt

[asterisk-users] Auto Detect

Which command to run which will auto detect all hardwares present in the system ? OS : CentOS Running Asterisk ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit:

Re: [asterisk-users] Ntework Card

[r...@vicidialnow ~]# cat /etc/sysconfig/network-scripts/ifcfg-eth1 NAME="" BOOTPROTO=none TYPE=Ethernet DEVICE=eth1 MTU="" NETMASK=255.255.255.0 BROADCAST=192.168.0.100 IPADDR=192.168.0.100 NETWORK=192.168.0.0 ONBOOT=no On Mon, Jan 26, 2009 at 4:07 PM, David @ULC wrote: > lspci Returns me bel

Re: [asterisk-users] German date format in voicemail emails

Klaus Darilion schrieb: > I want to configure voicemail to send emails with the date of the > message in German/Austria, that means: > > "Montag, 26 Jänner 2009" instead of "Monday, 26 January 2009" > > voicemail.conf refers to "man strftime". This refers to the current locales. > > So, I tried

Re: [asterisk-users] Vicidialnow

where i can buy the vicidial manual? thanks David 2009/1/26 ram > > > On 1/23/09, David @ULC wrote: >> >> >> >> But after installing it with CD , I guess we have to change SIP file and >> do few more changes .. >> >> I am looking for those steps.. >> >> >> On Fri, Jan 23, 2009 at 2:55 PM, David

[asterisk-users] German date format in voicemail emails

Hi! I want to configure voicemail to send emails with the date of the message in German/Austria, that means: "Montag, 26 Jänner 2009" instead of "Monday, 26 January 2009" voicemail.conf refers to "man strftime". This refers to the current locales. So, I tried export LANG=de export LC_ALL

Re: [asterisk-users] Ntework Card

I also installed the driver : [r...@vicidialnow ~]# tar zxf e1000-8.0.6.tar.gz [r...@vicidialnow ~]# cd e1000-8.0.6/src/ [r...@vicidialnow src]# make install make -C /lib/modules/2.6.18-53.el5/build SUBDIRS=/root/e1000-8.0.6/src modules make[1]: Entering d

Re: [asterisk-users] Ntework Card

lspci Returns me below Output :_ [r...@vicidialnow ~]# lspci 00:00.0 Host bridge: Intel Corporation 82G35 Express DRAM Controller (rev 03) 00:02.0 VGA compatible controller: Intel Corporation 82G35 Express Integrated Gr aphics Controller (rev 03) 00:02

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

Olivier a écrit : > From my point of view, the most important feature is TE-PTMP as this > the one used here (in France) when connecting a new Asterisk-based > IPBX to ISDN (I really don't know why TE-PTP is not used for that). Well this may depend of some parameter. We have a dual BRI line from Fr

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

On Mon, Jan 26, 2009 at 11:09:35AM +0100, Olivier wrote: > 2009/1/26 Stelios Koroneos > > > > > > > > > So my opinion is that these NT-PTMP is really and urgently needed, > > > especially if this TEI management is rather complex and therefore > > > would take a long time to develop and stabilize.

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

2009/1/26 Stelios Koroneos > > > > > So my opinion is that these NT-PTMP is really and urgently needed, > > especially if this TEI management is rather complex and therefore > > would take a long time to develop and stabilize. > > The alternative is to keep using those Patton, Quintum, etc ... bo

Re: [asterisk-users] Voicemail

On Mon, Jan 26, 2009 at 10:39 AM, Philipp Kempgen wrote: > Justin Fletcher schrieb: > > Is there a way to customize the voicemail navigation system? Google > shows > > some discussion of it in late 2006, but I see no references to it being > > implemented. > > In Asterisk 1.6 there's MiniVM (don

Re: [asterisk-users] custom cdr userfiled

so great, I am using odbc . but I can not find custom_odbc . is any keywords or links to useful documents? best Mani --- On Mon, 1/26/09, Philipp Kempgen wrote: > From: Philipp Kempgen > Subject: Re: [asterisk-users] custom cdr userfiled > To: "Asterisk Users" > Date: Monday, January 26, 2009,

Re: [asterisk-users] custom cdr userfiled

Pezhman Lali schrieb: > I added new field to cdr table , named "service" and type varchar(20), > but in extensions.conf with the following command, nothing to be saved. > > exten => _X.,1,Set(CDR(service)=OUT) > > does asterisk support this ability ? Depends on the CDR backend. custom_odbc: yes.

Re: [asterisk-users] Voicemail

Justin Fletcher schrieb: > Is there a way to customize the voicemail navigation system? Google shows > some discussion of it in late 2006, but I see no references to it being > implemented. In Asterisk 1.6 there's MiniVM (don't be mislead by "mini"). If you read German have a look at http://www.

Re: [asterisk-users] Start asterisk on boot

Hi That didnt work either, do i have to set some permissions? /ralf From: asterisk-users-boun...@lists.digium.com [mailto:asterisk-users-boun...@lists.digium.com] On Behalf Of Olivier Sent: den 26 januari 2009 09:52 To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [aster

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

> > So my opinion is that these NT-PTMP is really and urgently needed, > especially if this TEI management is rather complex and therefore > would take a long time to develop and stabilize. > The alternative is to keep using those Patton, Quintum, etc ... boxes > which is not what we would prefer

[asterisk-users] custom cdr userfiled

Dear, I added new field to cdr table , named "service" and type varchar(20), but in extensions.conf with the following command, nothing to be saved. exten => _X.,1,Set(CDR(service)=OUT) does asterisk support this ability ? is any setting must be changed, before that ? best Mani __

Re: [asterisk-users] soft phone

bilal ghayyad wrote: > But how can I have a one that has messanger facilities? Ability to see who > is login and send sms, in addition to do a calls? > > Zoiper communicator can do that, but there is no stable release yet and its probably not user friendly enough yet, but will be in a couple

Re: [asterisk-users] soft phone

Bayardo Sanchez wrote: > i am used eyebeam is a good softphone > > On Sun, Jan 25, 2009 at 12:55 PM, David fire > wrote: > > hi > wich soft phone do you recomend but i need this feature it must > ask for user name and password when it start. > i know xline

[asterisk-users] Voicemail

Is there a way to customize the voicemail navigation system? Google shows some discussion of it in late 2006, but I see no references to it being implemented. Many thanks, -Justin ___ -- Bandwidth and Colocation Provided by http://www.api-digital.com --

Re: [asterisk-users] Which policy for ISDN BRI support in NT/PtMP ?

2009/1/24 Matthew Fredrickson > Olivier wrote: > > Hi, > > > > As you may know, these ISDN BRI features are very important here in > > Europe as ISDN Basic Rate Access is very popular among Small & Medium > > Entreprises. > > I don't really know why but it seems that in many countries, default is

Re: [asterisk-users] Start asterisk on boot

On Mon, Jan 26, 2009 at 09:32:26AM +0100, Ralf Träskman wrote: > Hi > > We runs asterisk 1.6 on a ubuntu 8.04 server. > How can I get asterisk to start at boot? > I have created an file named asterisk in /etc/event.d and put in this > > ># This service maintains Asterisk from the point the s

Re: [asterisk-users] Start asterisk on boot

How did you installed asterisk? 2009/1/26 Ralf Träskman : > Hi > > > > We runs asterisk 1.6 on a ubuntu 8.04 server. > > How can I get asterisk to start at boot? > > I have created an file named asterisk in /etc/event.d and put in this > > > ># This service maintains Asterisk from the point th

Re: [asterisk-users] Start asterisk on boot

2009/1/26 Ralf Träskman > Hi > > > > We runs asterisk 1.6 on a ubuntu 8.04 server. > > How can I get asterisk to start at boot? > > I have created an file named asterisk in /etc/event.d and put in this > > > > ># This service maintains Asterisk from the point the system is ># started unt

Re: [asterisk-users] Start asterisk on boot

On Mon, 2009-01-26 at 09:32 +0100, Ralf Träskman wrote: > Hi > > > > We runs asterisk 1.6 on a ubuntu 8.04 server. > > How can I get asterisk to start at boot? > > I have created an file named asterisk in /etc/event.d and put in this > > > > ># This service maintains Asterisk from t

[asterisk-users] Start asterisk on boot

Hi We runs asterisk 1.6 on a ubuntu 8.04 server. How can I get asterisk to start at boot? I have created an file named asterisk in /etc/event.d and put in this # This service maintains Asterisk from the point the system is # started until it is shut down again. description "Asteris