!
-Michael Sullivan-
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http://lists.digium.com/mailman/listinfo/asterisk-users
On Wed, 2006-12-13 at 14:21 +1100, Paul Hales wrote:
I would be very surprised if your modem is supported by Asterisk - but I
suppose it's worth a try.
What does 'zap show status' and 'zap show channels' show in the Asterisk
CLI?
PaulH
camille*CLI zap show status
No Zaptel interface
On Wed, 2006-12-13 at 15:53 +1100, Paul Hales wrote:
What does zttool show?
And after you 'modprobe wctdm' what does your dmesg
read? /var/log/messages?
You should see something about a card being recognised
PaulH
After I modprobe wctdm, nothing new shows up in /var/log/messages
IF I wanted to do the whole sophisticated telephony VoIP stuff
asterisk, what hardware would I need? I have a feeling that my fax
modem is probably not going to work out. My wife and I have an income
of $650 a month. After the first-of-the-month bills are payed, we're
lucky if we have $100 left
On Wed, 2006-12-13 at 08:29 -0600, jason wrote:
cheapy PC (throw away PII is fine) and if you want to use the PSTN, a
X100P FXO card. These can be had on ebay for 11 bucks, but I understand
that even that pushes the bank some days. You don't need the card, you
only need it if you want to
I need to moprobe something else or alter my kernel config for ztcfg
not to error?
-Michael Sullivan-
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
http
On Mon, 2006-12-18 at 22:19 +0200, Tzafrir Cohen wrote:
On Mon, Dec 18, 2006 at 02:10:23PM -0600, Michael Sullivan wrote:
On Wed, 2006-12-13 at 14:21 +1100, Paul Hales wrote:
I would be very surprised if your modem is supported by Asterisk - but I
suppose it's worth a try.
What
I changed
fxsks=2
to
fxsks=1
and now ztcfg works:
camille ~ # ztcfg -vv
Zaptel Configuration
==
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
camille ~ #
I bought the card on ebay. The seller sent some configuration
Here's where I stand:
camille asterisk # ztcfg -vv
Zaptel Configuration
==
Channel map:
Channel 01: FXS Kewlstart (Default) (Slaves: 01)
1 channels configured.
camille*CLI zap show status
Description Alarms IRQbpviol
CRC4
On Tue, 2006-12-19 at 00:09 +0200, Tzafrir Cohen wrote:
On Mon, Dec 18, 2006 at 03:53:55PM -0600, Michael Sullivan wrote:
Here's where I stand:
camille asterisk # ztcfg -vv
Zaptel Configuration
==
Channel map:
Channel 01: FXS Kewlstart (Default
Could the fact that asterisk isn't aswering the phone be a firewall
issue? What port(s) on TCP and UDP do I need to open for incoming calls
to be allowed to go to asterisk?
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users
On Mon, 2006-12-18 at 22:03 -0500, Time Bandit wrote:
camille*CLI zap show channels
Chan Extension Context Language MusicOnHold
pseudoincomingen
This should show something like this :
panoramix*CLI zap show channels
Chan Extension Context
Now for some reason instead of giving me an error on the caller ID, it's
not mentioning the caller ID at all. Is there some explicit thing I
need to put in to get the caller ID?
___
--Bandwidth and Colocation provided by Easynews.com --
asterisk-users
OK. My basic asterisk install seems to be working. I can get caller
ID. My dialplan says:
[incoming]
; incoming calls from the FXO port are directed to this context from
zapata.conf
exten = s/9185415897,1,Set(CALLERID(name)=Michael Sullivan)
exten = s/9185415897,1,HANGUP(1)
exten = s,1,Set
On Wed, 2006-12-20 at 16:12 -0800, Anthony Rodgers wrote:
Here's how to unsubscribe:
First, ask your Internet Provider to mail you an Unsubscribing Kit.
Then follow these directions.
The kit will most likely be the standard no-fault type. Depending on
requirements, System A and/or System
15 matches
Mail list logo
