Hi there,
I'm Using TxFAX to send faxes via Zaptel PRI. I have 2 PSTN PRI Providers,
with the first provider, all faxes are trasmited fine. With the second
provider, faxes can't be sent, we suspect about the setting of this PRI
provider, perhaps is doing some compression somewhere. Any suggestion
Hi Gang,
I'm trying to make an application to upload a tiff via a web
interface, slap a cover page onto it, merge the two into a new tiff and send
it out via txfax. I'm able to get it out to a fax machine using this
sequence:
/usr/bin/tiff2pdf /tmp/faxout/1229978819_filea.tif -o
Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] TXFax/RXFax/AGX-Addons/SpanDSP Crashing
No progress at all. Version from Debian/Lenny repository still crashes and
I'm not able to compile AGX. It gives out a long list of error messages.
Some unsatisfied dependencies...?
I
and clean out of sand and drywall pieces :-(
Martin
- Original Message -
From: Justin Newman
To: asterisk-users@lists.digium.com
Cc: [EMAIL PROTECTED]
Sent: 11. dubna 2008 13:00
Subject: Re: [asterisk-users] TXFax/RXFax/AGX-Addons/SpanDSP Crashing
Did this just start
Did this just start happening with the 1.4 tree?
Have you made any progress on getting it resolved?
Justin Newman
Matt Riddell wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tzafrir Cohen wrote:
Let's be more specific here, folks:
What version numbers?
Asterisk, spandsp,
Hi guys,
I installed asterisk 1.4.17 and mISDN 1.1.7 with AGX addons to test the faxs.
If I receive i do not have any problem, but i'm not able to send put any fax, i
get always the same error:
txfax_exec: transmission done with ast_read(chan) == NULL
Anyone has txfax working with asterisk
Subject: [asterisk-users] TxFax in asterisk 1.4
Hi guys,
I installed asterisk 1.4.17 and mISDN 1.1.7 with AGX addons to test the faxs.
If I receive i do not have any problem, but i'm not able to send put any fax, i
get always the same error:
txfax_exec: transmission done with ast_read(chan
Matt Riddell wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tzafrir Cohen wrote:
Let's be more specific here, folks:
What version numbers?
Asterisk, spandsp, agx-addons / rx-tx-fax?
Asterisk: yesterday's 1.4 SVN
SpanDSP: tried with pre 15, 16 and 18
AGX-Addons: tried with
Matt Riddell wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tzafrir Cohen wrote:
Let's be more specific here, folks:
What version numbers?
Asterisk, spandsp, agx-addons / rx-tx-fax?
Asterisk: yesterday's 1.4 SVN
SpanDSP: tried with pre 15, 16 and 18
AGX-Addons: tried
. brezna 2008 21:02
Subject: [asterisk-users] TXFax/RXFax/AGX-Addons/SpanDSP Crashing
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
anyone else seen RX/TXFax crashing Asterisk on latest Asterisk SVN?
I've now seen it on two machines I tried to set up - one it seems
because the tiff
On Wed, Mar 12, 2008 at 08:18:25AM -0400, Martin wrote:
- Original Message -
From: Matt Riddell [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: 11. brezna 2008 21:02
Subject: [asterisk-users] TXFax/RXFax/AGX-Addons
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Tzafrir Cohen wrote:
Let's be more specific here, folks:
What version numbers?
Asterisk, spandsp, agx-addons / rx-tx-fax?
Asterisk: yesterday's 1.4 SVN
SpanDSP: tried with pre 15, 16 and 18
AGX-Addons: tried with 1.4.5 and svn trunk
rx/txfax:
My asterisk crashes after fax is received using app_rxfax. But its not
svn
version, its binary from Debian/Lenny ...
Let's be more specific here, folks:
What version numbers?
Asterisk, spandsp, agx-addons / rx-tx-fax?
Asterisk 1.4.17
libspandsp3 0.0.4 pre16-1
I don't know how to tell
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi all,
anyone else seen RX/TXFax crashing Asterisk on latest Asterisk SVN?
I've now seen it on two machines I tried to set up - one it seems
because the tiff file was malformed, but the other is doing:
tiff - tx fax - zaptel - pstn - ddi - zaptel
On Fri, 21 Dec 2007 08:50:28 -0500, David Boyd wrote:
On Fri, 2007-12-21 at 18:41 +0800, Dinesh Nair wrote:
the attached log with verbose=6 and debug=6 refers.
we've got a sangoma A104 (no hwec) with PRI ports 1 3 loopbacked to
each other. we're trying to have txfax send out on one of
the attached log with verbose=6 and debug=6 refers.
we've got a sangoma A104 (no hwec) with PRI ports 1 3 loopbacked to each
other. we're trying to have txfax send out on one of those pri ports with
rxfax listening on the other side, hence having asterisk send a fax to
itself. we however have
On Fri, 2007-12-21 at 18:41 +0800, Dinesh Nair wrote:
the attached log with verbose=6 and debug=6 refers.
we've got a sangoma A104 (no hwec) with PRI ports 1 3 loopbacked to each
other. we're trying to have txfax send out on one of those pri ports with
rxfax listening on the other side,
Hello
my current test is to send a fax to an analog fax (# is 5656) using the
Asterisk spooler.
I created this file which I copied into /var/spool/asterisk/outgoing
directory:
# fax_out.call
Channel: Zap/4/5656
MaxRetries: 50
RetryTime: 60
WaitTime: 45
Application: txfax
Data:
Hi,
I have created mail to fax with txfax. I send faxes successfully. But I
want to know, is it possible to get result from txfax and what are solutions
to do this? For example, if fax send is unsuccessfully, the user will get
email, that fax was unsuccessfully.
Thanks
Steve and everyone...
I am using spandsp snapshot from oct 12, 2006. I am using asterisk 1.2.13.
When I am sending faxes I am only getting partial pages.
Internally using an IAXY connected to the fax machine I get 1 page of 3.
Extenally to a fax service using TDM2401E card I get the same
Hi all,
What is the reliability of sending faxes with txfax?
I am sending a 4 page fax. I have received 1 and 2 pages
but never the whole thing?
Do I have to have T1 or something different to reliably
send faxes with a TDM card?
Jerry
___
: asterisk-users@lists.digium.com
Emne: [asterisk-users] txfax
reliability on TDM cards
Hi all,
What is the reliability of sending faxes with txfax?
I am sending a 4 page fax. I have received 1 and 2 pages
but never the whole thing?
Do I have to have T1 or something different to reliably
send faxes
I am playing with txfax. I have gotten a fax to send which is great.
However now I am creating a multipage fax, I can view all the pages with
viewfax (mgetty-viewfax package)
but when I fax it with txfax I only get 1 page
Any ideas there?
Jerry
I basically do:
gs -q -sDEVICE=tiffg3
Hi
all,
I'm using spandsp
0.0.2pre21 with tiff 3.7.1 and asterisk 1.0.9
With rxfax
application, everythinghs is ok, but when i try to send a fax whit txfax
applicationthe channel got hangup. I'm testing send fax towards an ATA
grandstrem 488, but if i sent it to a normal fax i got the same
Dear folks,
I got a problem sending faxes using spandsp. Primerily, when the tiff file
made using GIMP 2 with different compresions the fax app break downs whole
*. Moreover when i made a tiff file using Microsoft mdi, everything works
fine but on the other end of the call, the received fax
I can not get txfax to work with a multiple page
tiff image. It works fine with a single page tiff image. Has anyone had this
problem before and if so is there a fix?
Thank You,James HawksCTO
CustomerFunding.com Inc.(877) 784-1030
x206
___
James,
Which fax application are you
using?
MD
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of James
HawksSent: Monday, March 27, 2006 5:29 PMTo:
asterisk-users@lists.digium.comSubject: [Asterisk-Users] txfax
problem
I can not get txfax to work with a multiple page
.
Thank You,James HawksCTO CustomerFunding.com Inc.(877) 784-1030
x206
- Original Message -
From:
Technical Support
To: 'Asterisk Users Mailing List -
Non-Commercial Discussion'
Sent: Monday, March 27, 2006 4:31
PM
Subject: RE: [Asterisk-Users] txfax
problem
Of Philip
Edelbrock
Sent: 26 January 2006 02:32 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] txfax application problem
Jeff Herring wrote:
would you care to share with the list your installation procedure
and configuration files associated with your
Allan Gee wrote:
I wonder if anyone can tell me which version of spandsp is used in iaxmodem?
IAXmodem version 0.0.8 uses spandsp development snapshot 20051220... so
it's 0.0.3, more recent than pre6.
I would like to use the app_rxfax application WITH iaxmodem.
This will be possible
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] txfax application problem
Nobody seems to use txfax or does nobody have any problems with it?
I have sent mails to most lists and get no reply.
I cannot get a fax to go through with txfax.
I use a call file as a test and all I get
Jeff Herring wrote:
would you care to share with the list your installation procedure
and configuration files associated with your iaxmodem and hylafax
installation alongside asterisk?
Sure! Some things, I'm sure, could use improvement, but this is working
for me:
Get iaxmodem:
Nobody seems to use txfax or does nobody have any problems with it?
I have sent mails to most lists and get no reply.
I cannot get a fax to go through with txfax.
I use a call file as a test and all I get on the receiving fax is a bunch of
vertical lines.
my call file is:
Downgrade your spandsp. Do some reading on spandsp first!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Allan Gee
Sent: Tuesday, January 24, 2006 10:36 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] txfax application problem
Nobody
]
[mailto:[EMAIL PROTECTED] On Behalf Of Allan Gee
Sent: Tuesday, January 24, 2006 10:36 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] txfax application problem
Nobody seems to use txfax or does nobody have any problems with it?
I have sent mails to most lists and get no reply.
I
reading on spandsp first!
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Allan Gee
Sent: Tuesday, January 24, 2006 10:36 AM
To: asterisk-users@lists.digium.com
Subject: [Asterisk-Users] txfax application problem
Nobody seems to use txfax or does nobody
?
Regards Allan Gee
Phone: +27 21 4644400 Ext. 103
www.equation.co.za
-Original Message-
From: Technical Support [mailto:[EMAIL PROTECTED]
Sent: 24 January 2006 06:16 PM
To: [EMAIL PROTECTED]; 'Asterisk Users Mailing List - Non-Commercial
Discussion'
Subject: RE: [Asterisk-Users] txfax
I am getting the same with cvs head as of today.
on Thu, 10 Nov 2005 15:29:05 -0600 Anton Krall [EMAIL PROTECTED] wrote:
Hi Steve!
I tried compiling the recent spandsp 0.0.2pre21c with 1.2rc1 and I also
compiled unicall for r2mfc support.
R2mfc seems to be working great! But when I load
Hi Steve!
I tried compiling the recent spandsp 0.0.2pre21c with 1.2rc1 and I also
compiled unicall for r2mfc support.
R2mfc seems to be working great! But when I load everything up I get this on
the CLI:
Nov 10 15:28:49 WARNING[26895]: loader.c:325 __load_resource:
Hi All,
With spandsp.0.0.2 pre20 installed I can't seem to send faxes with
tx_fax over a Zap channel (POTS). rx_fax works just fine so no issues
with libtiff and (presumably) libxml2.
Basically I get 'slow carrier up' and 'slow carrier down' together with
accompanying beeping noises until
Hi,
do you know what it means the following:
Call failed to go through, reason 3
I received it when I try to send a FAX and no one answer it.
Thank you
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
This is a wild guess, but maybe it means
no one answered!
From:
[EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Il Neofita
Sent: Monday, September 19, 2005
8:22 AM
To: Asterisk
Users Mailing List - Non-Commercial Discussion
Subject: [Asterisk-Users] TXFAX
Hi,
do
As subject, (i've updated spandsp to latest version) and this is the log:
Sep 15 13:06:50 VERBOSE[14085]: -- Attempting call on Zap/g0/2479 for
application txfax(/var/tmp/ast_fax-1126782409.10240.1804289383.0|caller)
(Retry 1)
Sep 15 13:06:50 DEBUG[14085]: Using channel 1
Sep 15 13:06:50
Chris Shipman schrieb:
What build of SpanDSP did you use?
spandsp-0.0.2pre18
I'm working on a windows program
so users can print to a local printer which will be forwarded to the
asterisk server to be faxed.
So far the program FTPs a Tiff to the Asterisk server to be faxed
I don't understand, what you are telling or asking us
with this information. Has it something to do with your question?
But others might understand... I do. Yes, it's related.
Essentially it's the equivalent of WHFC for Hylafax -- a Windows
client that will allow Windows users print from any
]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Friday, September 09, 2005 6:20 PM
Subject: Re: [Asterisk-Users] Txfax
I don't understand, what you are telling or asking us
with this information. Has it something to do with your question
the
program.Regards,Chris- Original Message -From: Luki [EMAIL PROTECTED]To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.comSent: Friday, September 09, 2005 6:20 PMSubject: Re: [Asterisk-Users] Txfax I don't understand, what you are telling or asking
It doesn't say how to use
it.
Chris
- Original Message -
From:
Il
Neofita
To: Asterisk Users Mailing List -
Non-Commercial Discussion
Sent: Friday, September 09, 2005 8:30
PM
Subject: Re: [Asterisk-Users] Txfax
This is the script I do not remeber
Is theresome way to know if the fax was received correctly or not?
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
Asterisk-Users@lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To
Il Neofita schrieb:
Is there some way to know if the fax was received correctly or not?
Hi,
after also having asked here some days ago without an answer,
I assume, there is currently no way.
Thus, I started to study a little bit the source code.
Maybe I found a solution, which will work.
I
method thus far)
Regards,
Chris
- Original Message -
From: Roger Schreiter [EMAIL PROTECTED]
To: Asterisk Users Mailing List - Non-Commercial Discussion
asterisk-users@lists.digium.com
Sent: Thursday, September 08, 2005 5:43 PM
Subject: Re: [Asterisk-Users] Txfax
Il Neofita schrieb
hum... may be you could try to connect a real fax device at the other end ??On 8/29/05, Il Neofita [EMAIL PROTECTED]
wrote:Hi,I'm usinga script in order to send out my faxes with the application
txfax, therefore, I do not know how to see if the faxes are sent.Any
Hi,
I'm using a script in order to send out my faxes with the application
txfax, therefore, I do not know how to see if the faxes are sent.
Any idea?
___
--Bandwidth and Colocation sponsored by Easynews.com --
Asterisk-Users mailing list
asterisk-users@lists.digium.com
Sent: Wednesday, August 17, 2005 9:57 PM
Subject: Re: [Asterisk-Users] TxFax - RxFax on same machine hangs
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 17 Aug 2005, Steve Underwood wrote:
Bartek Kania wrote:
If the call really dialed out through
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 17 Aug 2005, Steve Underwood wrote:
Roger Schreiter wrote:
How can I enable asterisk to fax to itsself?
Well, it won't be the normal operation, but when allowing clients
to fax, it can happen by chance, that someone faxes to another
user on
Bartek Kania wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 17 Aug 2005, Steve Underwood wrote:
Roger Schreiter wrote:
How can I enable asterisk to fax to itsself?
Well, it won't be the normal operation, but when allowing clients
to fax, it can happen by chance, that someone
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 17 Aug 2005, Steve Underwood wrote:
Bartek Kania wrote:
If the call really dialed out through a PSTN port and back in it
should work. It is was a pure internal connection between 2
processes it will not. The timing for these programs comes
, 2005 9:57 PM
Subject: Re: [Asterisk-Users] TxFax - RxFax on same machine hangs
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wed, 17 Aug 2005, Steve Underwood wrote:
Bartek Kania wrote:
If the call really dialed out through a PSTN port and back in it
should work. It is was a pure internal
Hi,
I noticed a strange behaviour:
Faxing using spandsp (TxFax) from my asterisk box to my
old, common fax machine at home works fine.
Faxing from the same box to my office pc-fax (Hylafax)
also worke fine.
Receveiving faxes on my asterisk box using spandsp (RxFax)
also works fine. It is a PSTN
Roger Schreiter wrote:
Hi,
I noticed a strange behaviour:
Faxing using spandsp (TxFax) from my asterisk box to my
old, common fax machine at home works fine.
Faxing from the same box to my office pc-fax (Hylafax)
also worke fine.
Receveiving faxes on my asterisk box using spandsp (RxFax)
also
Steve Underwood schrieb:
...
If the call really dialed out through a PSTN port and back in it should
work. It is was a pure internal connection between 2 processes it will
Hi,
the setup is:
TxFax (Box A)
Dial(Zap...) (Box A, Digium Card)
v
PSTN
v
Box B, Digium Card
Dial(IAX2...) (Box
Hello,
I have installed SpanDSP and the apps txfax an rxfax. Unfortunately I am
having problems sending faxes. I only get cancelled transfers. I am
trying to send a fax to a ISDN card connected to a zap channel.
I am using following call file:
---
Channel:
I've been using spandsp and rxfax to receive faxes for a while now and over
the past few days I've looked into the other side of things - txfax. I
can't seem to get it working properly. I've included debug logs below of
both the tx and rx side of things. I've tried three different servers,
Can someone explain me what's going on and why the receiver of this fax
guives up saying communication error?
Slow carrier up
Slow carrier down
Slow carrier up
CSI: 40 20 20 20 20 20 20 20 34 39 34 35 36 34 39 35 30 20 39 33 2b
CSI without final frame tag
Remote fax gave CSI as: +39 059465494
Marco Parmeggiani wrote:
Can someone explain me what's going on and why the receiver of this
fax guives up saying communication error?
Start tx page 1
EOP: 2f
RTN: 4c
DCN: fb
Disconnecting
The receiver says communication error because txfax's response to the
receiver's RTN signal was a
Lee Howard wrote:
Marco Parmeggiani wrote:
Can someone explain me what's going on and why the receiver of this
fax guives up saying communication error?
Start tx page 1
EOP: 2f
RTN: 4c
DCN: fb
Disconnecting
The receiver says communication error because txfax's response to the
Steve Underwood wrote:
TxFAX is doing the right thing, according to the spec. If you don't
know how to handle RTN you should disconect. spandsp has not yet been
taught how to retrain and retransmit properly.
Okay, so it's not an error. It's an unimplemented feature. :-)
However, this is
Hi ALL.
I have a problem with TxFax application. (RxFax is working properly)
Txfax does not work when sending tiff files bigger than approx. 18Kb. If tiff
file smaller than 18Kb everything is OK. Tested in LAN with Panasonic UF-E1 fax
machine (tiff files was created by the rxfax from that
I needed a system to allow my windows clients to hit print and
eventually result in a fax being sent via asterisk. I used smbfax and
modified it to allow the phone number to be supplied by means of an
email and it all works fine
...except I do not know how to read off the TxFAX application
I am trying to use TxFax and I'm running into a few issues with it.
The problems seem to come from the format of the tiff I am sending.
Does anyone know what the correct format to be sending in? I'm using
Ghostscript to create the tiff, and I've tried quite a few different
settings. Right now the
If the problem is with libtiff, its a problem with every version i've
tried (3.5.7, 3.6.0, 3.6.1, 3.7.1 and 3.7.2)
On 4/30/05, Steve Underwood [EMAIL PROTECTED] wrote:
Me wrote:
Hi all,
I'm trying to use spandsp and asterisk to send faxes. To do so I am
creating tiffs with Ghostscript.
Send an example TIFF file, and I will investigate.
Regards,
Steve
Me wrote:
If the problem is with libtiff, its a problem with every version i've
tried (3.5.7, 3.6.0, 3.6.1, 3.7.1 and 3.7.2)
On 4/30/05, Steve Underwood [EMAIL PROTECTED] wrote:
Me wrote:
Hi all,
I'm trying to use spandsp
Me wrote:
Hi all,
I'm trying to use spandsp and asterisk to send faxes. To do so I am
creating tiffs with Ghostscript. When I use Ghostscript 6.50 it seems
to work fine, but when I create the tiff using Ghostscript 8.51 (or
7.06) txfax garbles the tiff and it comes through all messed up.
First of
Hi all,
I'm trying to use spandsp and asterisk to send faxes. To do so I am
creating tiffs with Ghostscript. When I use Ghostscript 6.50 it seems
to work fine, but when I create the tiff using Ghostscript 8.51 (or
7.06) txfax garbles the tiff and it comes through all messed up.
First of all is
Hi Ppl.
Once, couple weeks ago when I have updated * from CVS-HEAD something
happen and I could not send a fax anymore.
After that I have tried previous * CVS versions with different versions
of spandsp (0.0.1, 0.0.2pre4, 0.0.2pre10) but without any changes.
I have tried that on Fedora Core 2 with
Hi Vladyslav,
Use 0.0.2pre1, but add the line
fax.verbose = TRUE;
just after
fax_init(fax, calling_party, NULL);
That will turn on the detailed logging.
Is the listing you posted the entire log? It looks like there should be
more.
One common mistake people make - Did you use the
Thx for your reply.
On Wed, 2005-03-16 at 17:35, Steve Underwood wrote:
Hi Vladyslav,
Use 0.0.2pre1, but add the line
fax.verbose = TRUE;
just after
fax_init(fax, calling_party, NULL);
That will turn on the detailed logging.
Added, recompiled and tested again.
Is the
Hi Vladyslav,
The log looks good so far. The far end has negotiated. The fast modem
has been tested. Transmission of the first page has been. What happens
next. I don't think the log really stopped at that point. Did you wait
long enough for the page transmission to complete?
Regards,
Steve
On Wed, 2005-03-16 at 18:25, Steve Underwood wrote:
Hi Vladyslav,
The log looks good so far. The far end has negotiated. The fast modem
has been tested. Transmission of the first page has been. What happens
next. I don't think the log really stopped at that point. Did you wait
long
Hi list,
Just installed spandsp. In my limiting testing, I have an issue on a
Philips fax machine (HFC21) directly connected to my * server through
TDM400, reception with rxfax works fine, but txfax always fails. Below
is a transcript of failed transmit.
This is with asterisk-1.0.3 (with native
Hi Jean Denis,
I think you are using spandsp-0.0.1 It has this problem with some
Philips, Canon, and a few other machines. Try spandsp-0.0.2pre6. That
fixes the problem, and has various other improvements.
Regards,
Steve
Jean-Denis Girard wrote:
Hi list,
Just installed spandsp. In my limiting
Steve Underwood a écrit :
Hi Jean Denis,
I think you are using spandsp-0.0.1 It has this problem with some
Philips, Canon, and a few other machines. Try spandsp-0.0.2pre6. That
fixes the problem, and has various other improvements.
Sorry for forgetting that important info in my first message,
Trying to send a fax using a call file and txfax.
Phone dials the remote fax answers but * gives me:
Call failed to go through, reason 3
And hangs up.
Any help.
Thanks
--John
___
Asterisk-Users mailing list
[EMAIL PROTECTED]
John Hill wrote:
Trying to send a fax using a call file and txfax.
Phone dials the remote fax answers but * gives me:
Call failed to go through, reason 3
And hangs up.
Any help.
Thanks
--John
Did you add |caller to the command?
Steve
___
In my dial plan, I have
exten = 160,1,txfax(${FILENAME})
When I dial 160 from a fax machine, I hear a broken dial tone. The
processor utilization goes to 100%, and the following pair of messages
is displayed at the console:
Slow carrier up
Slow carrier down
This pair of messages repeats until
Michael Welter wrote:
In my dial plan, I have
exten = 160,1,txfax(${FILENAME})
When I dial 160 from a fax machine, I hear a broken dial tone. The
processor utilization goes to 100%, and the following pair of messages
is displayed at the console:
100% CPU utilisation is not normal, unless you
Hi all,
I'm using txfax and rxfax to send and receive faxes. I find that txfax performs very
well when sending to an old fax machine. However, when trying to send to a Mac (OS X)
that accepts faxes, I get a Trainability test failed message on the * console (full
console log below).
I'm OK
Most Canon models seem to be working OK. Serge's Canon drops the line
every time during negotiation, as though it has decided spandsp doesn't
support compatible capabilities. It is not clear why this is happening,
though. The modes which spandsp is asking to use are the most widely
used ones.
On Sat, 2004-04-24 at 12:38, Steve Underwood wrote:
Most Canon models seem to be working OK. Serge's Canon drops the line
every time during negotiation, as though it has decided spandsp doesn't
support compatible capabilities. It is not clear why this is happening,
though. The modes which
Hi Eric and Steve :)
My fax numbers (both Canon faxes)
3717201651
3726062501
- Original Message -
From: Eric Wieling [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Saturday, April 24, 2004 8:46 PM
Subject: Re: [Asterisk-Users] TxFax/SpanDSP problems
On Sat, 2004-04-24 at 12
I'm getting the following when sending to a specific fax machine. Any
ideas?
File name is '/var/spool/asterisk/email2fax/7F2SOeYJiU.tif'
Changed from phase 0 to 2
Slow carrier up
Slow carrier down
Slow carrier up
NSF: 20 00 00 11 80 00 8a 49 10 53 54 49 52 4c 49 4e 47 20 43 4f 56
49 4e 47 54 00
Wieling [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 21, 2004 6:19 PM
Subject: [Asterisk-Users] TxFax/SpanDSP problems
I'm getting the following when sending to a specific fax machine. Any
ideas?
File name is '/var/spool/asterisk/email2fax/7F2SOeYJiU.tif'
Changed from phase 0
to fix the problem :(
Looks like connection was dropped by fax mashine without any reason
- Original Message -
From: Eric Wieling [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 21, 2004 6:19 PM
Subject: [Asterisk-Users] TxFax/SpanDSP problems
I'm getting
to fix the problem :(
Looks like connection was dropped by fax mashine without any reason
- Original Message -
From: Eric Wieling [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, April 21, 2004 6:19 PM
Subject: [Asterisk-Users] TxFax/SpanDSP problems
I'm getting
94 matches
Mail list logo
