[asterisk-users] Asterisk and TDM400P
Hi, I have a problem with a TDM400P card configuration. Incoming calls are answered by asterisk, asterisk place the call on the destination ATA/analog-phone, the phone begins to ring and when our recepcionist pickup the phone to play a welcome message, she nothing hear on the line during five or six seconds repeating the message three or four times until someone appear on the phone. I was playing with Wait application but nothing changes this issue. On the other hand I disabled callerid from zapata.conf but this problem continues. I'm using Asterisk 1.2.24 on a debian system I hope have exposed the problem crearly. Thanks for any idea to solve this issue. Cheers Alejandro González ___ --Bandwidth and Colocation Provided by http://www.api-digital.com-- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Hi Noc, I had similar problem. Check If you have netjetpci module and try to delete it...this solved my problem. Giorgio Incantalupo Noc Phibee wrote: Hi i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect my asterisk to a french analog line. In my zaptel.conf, i have: loadzone=fr defaultzone=fr fxols=3 when i load the module, i have in logs: Nov 24 06:13:40 gw kernel: Freed a Wildcard Nov 24 06:13:40 gw kernel: Zapata Telephony Interface Unloaded Nov 24 06:13:40 gw zaptel: Removing zaptel module: succeeded Nov 24 06:13:42 gw kernel: Zapata Telephony Interface Registered on major 196 Nov 24 06:13:42 gw kernel: Zaptel Version: 1.2.9.1-1mdv2007.0 Echo Canceller: KB1 Nov 24 06:13:42 gw zaptel: Loading zaptel framework: succeeded Nov 24 06:13:42 gw kernel: ACPI: PCI Interrupt :02:0a.0[A] - GSI 21 (level, low) - IRQ 20 Nov 24 06:13:43 gw kernel: Freshmaker version: 73 Nov 24 06:13:43 gw kernel: Freshmaker passed register test Nov 24 06:13:43 gw kernel: Module 0: Not installed Nov 24 06:13:43 gw kernel: Module 1: Not installed Nov 24 06:13:43 gw kernel: Module 2: Not installed Nov 24 06:13:43 gw kernel: Module 3: Installed -- AUTO FXO (FCC mode) Nov 24 06:13:43 gw kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (1 modules) Nov 24 06:13:44 gw kernel: Registered tone zone 2 (France) Nov 24 06:13:44 gw zaptel: Running ztcfg: succeeded and my problems are whit all sample that i have, asterisk don't restart and put me: Nov 24 06:15:17 NOTICE[2943] cdr.c: CDR simple logging enabled. Nov 24 06:15:17 WARNING[2943] chan_zap.c: Unable to specify channel 3: No such device Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to open channel 3: No such device here = 0, tmp-channel = 3, channel = 3 Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to register channel '3' Nov 24 06:15:17 WARNING[2943] loader.c: chan_zap.so: load_module failed, returning -1 Nov 24 06:15:17 WARNING[2943] loader.c: Loading module chan_zap.so failed! for all channel (i have tested from 1 to 5) my zapata.conf: [trunkgroups] [channels] context=default signalling=fxo_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no busydetect=yes musiconhold=default channel = 3 where is my errors ? Thanks for your help ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Thanks Giogio, but no i don't have this module bye Giorgio Incantalupo a écrit : Hi Noc, I had similar problem. Check If you have netjetpci module and try to delete it...this solved my problem. Giorgio Incantalupo Noc Phibee wrote: Hi i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect my asterisk to a french analog line. In my zaptel.conf, i have: loadzone=fr defaultzone=fr fxols=3 when i load the module, i have in logs: Nov 24 06:13:40 gw kernel: Freed a Wildcard Nov 24 06:13:40 gw kernel: Zapata Telephony Interface Unloaded Nov 24 06:13:40 gw zaptel: Removing zaptel module: succeeded Nov 24 06:13:42 gw kernel: Zapata Telephony Interface Registered on major 196 Nov 24 06:13:42 gw kernel: Zaptel Version: 1.2.9.1-1mdv2007.0 Echo Canceller: KB1 Nov 24 06:13:42 gw zaptel: Loading zaptel framework: succeeded Nov 24 06:13:42 gw kernel: ACPI: PCI Interrupt :02:0a.0[A] - GSI 21 (level, low) - IRQ 20 Nov 24 06:13:43 gw kernel: Freshmaker version: 73 Nov 24 06:13:43 gw kernel: Freshmaker passed register test Nov 24 06:13:43 gw kernel: Module 0: Not installed Nov 24 06:13:43 gw kernel: Module 1: Not installed Nov 24 06:13:43 gw kernel: Module 2: Not installed Nov 24 06:13:43 gw kernel: Module 3: Installed -- AUTO FXO (FCC mode) Nov 24 06:13:43 gw kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (1 modules) Nov 24 06:13:44 gw kernel: Registered tone zone 2 (France) Nov 24 06:13:44 gw zaptel: Running ztcfg: succeeded and my problems are whit all sample that i have, asterisk don't restart and put me: Nov 24 06:15:17 NOTICE[2943] cdr.c: CDR simple logging enabled. Nov 24 06:15:17 WARNING[2943] chan_zap.c: Unable to specify channel 3: No such device Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to open channel 3: No such device here = 0, tmp-channel = 3, channel = 3 Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to register channel '3' Nov 24 06:15:17 WARNING[2943] loader.c: chan_zap.so: load_module failed, returning -1 Nov 24 06:15:17 WARNING[2943] loader.c: Loading module chan_zap.so failed! for all channel (i have tested from 1 to 5) my zapata.conf: [trunkgroups] [channels] context=default signalling=fxo_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no busydetect=yes musiconhold=default channel = 3 where is my errors ? Thanks for your help ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Noc, it seems your zap*.conf are okhave you tried to do all the modules loading procedure step by step? ztcfg -s modprobe -r wctdm modprobe wctdm ztcfg -vv Giorgio Incantalupo Noc Phibee wrote: Thanks Giogio, but no i don't have this module bye Giorgio Incantalupo a écrit : Hi Noc, I had similar problem. Check If you have netjetpci module and try to delete it...this solved my problem. Giorgio Incantalupo Noc Phibee wrote: Hi i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect my asterisk to a french analog line. In my zaptel.conf, i have: loadzone=fr defaultzone=fr fxols=3 when i load the module, i have in logs: Nov 24 06:13:40 gw kernel: Freed a Wildcard Nov 24 06:13:40 gw kernel: Zapata Telephony Interface Unloaded Nov 24 06:13:40 gw zaptel: Removing zaptel module: succeeded Nov 24 06:13:42 gw kernel: Zapata Telephony Interface Registered on major 196 Nov 24 06:13:42 gw kernel: Zaptel Version: 1.2.9.1-1mdv2007.0 Echo Canceller: KB1 Nov 24 06:13:42 gw zaptel: Loading zaptel framework: succeeded Nov 24 06:13:42 gw kernel: ACPI: PCI Interrupt :02:0a.0[A] - GSI 21 (level, low) - IRQ 20 Nov 24 06:13:43 gw kernel: Freshmaker version: 73 Nov 24 06:13:43 gw kernel: Freshmaker passed register test Nov 24 06:13:43 gw kernel: Module 0: Not installed Nov 24 06:13:43 gw kernel: Module 1: Not installed Nov 24 06:13:43 gw kernel: Module 2: Not installed Nov 24 06:13:43 gw kernel: Module 3: Installed -- AUTO FXO (FCC mode) Nov 24 06:13:43 gw kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (1 modules) Nov 24 06:13:44 gw kernel: Registered tone zone 2 (France) Nov 24 06:13:44 gw zaptel: Running ztcfg: succeeded and my problems are whit all sample that i have, asterisk don't restart and put me: Nov 24 06:15:17 NOTICE[2943] cdr.c: CDR simple logging enabled. Nov 24 06:15:17 WARNING[2943] chan_zap.c: Unable to specify channel 3: No such device Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to open channel 3: No such device here = 0, tmp-channel = 3, channel = 3 Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to register channel '3' Nov 24 06:15:17 WARNING[2943] loader.c: chan_zap.so: load_module failed, returning -1 Nov 24 06:15:17 WARNING[2943] loader.c: Loading module chan_zap.so failed! for all channel (i have tested from 1 to 5) my zapata.conf: [trunkgroups] [channels] context=default signalling=fxo_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no busydetect=yes musiconhold=default channel = 3 where is my errors ? Thanks for your help ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Noc Phibee wrote: Thanks Giogio, but no i don't have this module bye Check your zapata.conf. Your signalling and channel settings are wrong for FXO module. signalling=fxs_ls channel= 4 FXO module use fxs signalling, FXS module use fxo signalling. Leo. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
thanks for this information, but no change: Nov 24 10:32:42 WARNING[6346] chan_zap.c: Unable to specify channel 4: No such device or address Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to open channel 4: No such device or address here = 0, tmp-channel = 4, channel = 4 Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to register channel '4' Nov 24 10:32:42 WARNING[6346] loader.c: chan_zap.so: load_module failed, returning -1 Nov 24 10:32:42 WARNING[6346] loader.c: Loading module chan_zap.so failed! Leo Ann Boon a écrit : Noc Phibee wrote: Thanks Giogio, but no i don't have this module bye Check your zapata.conf. Your signalling and channel settings are wrong for FXO module. signalling=fxs_ls channel= 4 FXO module use fxs signalling, FXS module use fxo signalling. Leo. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Noc Phibee wrote: thanks for this information, but no change: Nov 24 10:32:42 WARNING[6346] chan_zap.c: Unable to specify channel 4: No such device or address Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to open channel 4: No such device or address here = 0, tmp-channel = 4, channel = 4 Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to register channel '4' Nov 24 10:32:42 WARNING[6346] loader.c: chan_zap.so: load_module failed, returning -1 Nov 24 10:32:42 WARNING[6346] loader.c: Loading module chan_zap.so failed! Can you check if your /dev/zap directory is created correctly? On my machine with a TDM400P with 2xFXS and 2xFXO. [EMAIL PROTECTED] ~]$ ls /dev/zap/ 1 2 3 4 channel ctl pseudo time If you don't see anything then you'll have to check if your security setting is prevent access to /dev/zap. Leo ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Noc Phibee wrote: thanks for this information, but no change: Nov 24 10:32:42 WARNING[6346] chan_zap.c: Unable to specify channel 4: No such device or address Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to open channel 4: No such device or address here = 0, tmp-channel = 4, channel = 4 Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to register channel '4' Nov 24 10:32:42 WARNING[6346] loader.c: chan_zap.so: load_module failed, returning -1 Nov 24 10:32:42 WARNING[6346] loader.c: Loading module chan_zap.so failed! Hi, Check your /etc/zaptel.conf and ensure that it has the right kind of signalling set for the same channel number as that in you zapata.conf. do : cat /proc/zaptel/1 and it should show channels and the effective signalling settings for them. If signalling does not appear here,it means that, it is not configured properly, and loading chan_zap would fail. My first and fourth channels are configured as fxsks and the output i get is : #cat /proc/zaptel/1 Span 1: WCTDM/0 Wildcard TDM400P REV E/F Board 1 1 WCTDM/0/0 FXSKS 2 WCTDM/0/1 3 WCTDM/0/2 4 WCTDM/0/3 FXSKS HTH :) Regards, Pranav -- Blessed are the pessimists, for they take backups !! ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Leo Ann Boon a écrit : Noc Phibee wrote: thanks for this information, but no change: Nov 24 10:32:42 WARNING[6346] chan_zap.c: Unable to specify channel 4: No such device or address Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to open channel 4: No such device or address here = 0, tmp-channel = 4, channel = 4 Nov 24 10:32:42 ERROR[6346] chan_zap.c: Unable to register channel '4' Nov 24 10:32:42 WARNING[6346] loader.c: chan_zap.so: load_module failed, returning -1 Nov 24 10:32:42 WARNING[6346] loader.c: Loading module chan_zap.so failed! Can you check if your /dev/zap directory is created correctly? On my machine with a TDM400P with 2xFXS and 2xFXO. [EMAIL PROTECTED] ~]$ ls /dev/zap/ 1 2 3 4 channel ctl pseudo time If you don't see anything then you'll have to check if your security setting is prevent access to /dev/zap. Leo Yes i have ;=) [EMAIL PROTECTED] zap]# ll total 0 crw-rw 1 asterisk asterisk 196, 1 nov 24 06:29 1 crw-rw 1 asterisk asterisk 196, 2 nov 24 06:29 2 crw-rw 1 asterisk asterisk 196, 3 nov 24 06:29 3 crw-rw 1 asterisk asterisk 196, 4 nov 24 06:29 4 crw-rw 1 asterisk asterisk 196, 254 nov 24 06:29 channel crw-rw 1 asterisk asterisk 196, 0 nov 24 06:29 ctl crw-rw 1 asterisk asterisk 196, 255 nov 24 06:29 pseudo crw-rw 1 asterisk asterisk 196, 253 nov 24 06:29 timer ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Pranav Peshwe a écrit : Hi, Check your /etc/zaptel.conf and ensure that it has the right kind of signalling set for the same channel number as that in you zapata.conf. do : cat /proc/zaptel/1 and it should show channels and the effective signalling settings for them. If signalling does not appear here,it means that, it is not configured properly, and loading chan_zap would fail. My first and fourth channels are configured as fxsks and the output i get is : #cat /proc/zaptel/1 Span 1: WCTDM/0 Wildcard TDM400P REV E/F Board 1 1 WCTDM/0/0 FXSKS 2 WCTDM/0/1 3 WCTDM/0/2 4 WCTDM/0/3 FXSKS HTH :) Regards, Pranav Thanks for your help, a cat: [EMAIL PROTECTED] zap]# cat /proc/zaptel/1 Span 1: WCTDM/0 Wildcard TDM400P REV I Board 1 1 WCTDM/0/0 FXSKS 2 WCTDM/0/1 3 WCTDM/0/2 4 WCTDM/0/3 in my zaptel.conf, i have only: loadzone=fr defaultzone=fr fxsks=1 and zapata.conf: [trunkgroups] [channels] context=default signalling=fxs_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no busydetect=yes musiconhold=default callerid=Filtrinov0477530573 channel = 5 if i understand, my error are channel ? In zaptel.conf, its fxsks=1 and in zapata.conf it's channel = 0 no ? ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Hi Noc, why channel 5 in zapata? It must be channel 1 the same as in zaptel.conf. Giorgio Incantalupo Noc Phibee wrote: Pranav Peshwe a écrit : Hi, Check your /etc/zaptel.conf and ensure that it has the right kind of signalling set for the same channel number as that in you zapata.conf. do : cat /proc/zaptel/1 and it should show channels and the effective signalling settings for them. If signalling does not appear here,it means that, it is not configured properly, and loading chan_zap would fail. My first and fourth channels are configured as fxsks and the output i get is : #cat /proc/zaptel/1 Span 1: WCTDM/0 Wildcard TDM400P REV E/F Board 1 1 WCTDM/0/0 FXSKS 2 WCTDM/0/1 3 WCTDM/0/2 4 WCTDM/0/3 FXSKS HTH :) Regards, Pranav Thanks for your help, a cat: [EMAIL PROTECTED] zap]# cat /proc/zaptel/1 Span 1: WCTDM/0 Wildcard TDM400P REV I Board 1 1 WCTDM/0/0 FXSKS 2 WCTDM/0/1 3 WCTDM/0/2 4 WCTDM/0/3 in my zaptel.conf, i have only: loadzone=fr defaultzone=fr fxsks=1 and zapata.conf: [trunkgroups] [channels] context=default signalling=fxs_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no busydetect=yes musiconhold=default callerid=Filtrinov0477530573 channel = 5 if i understand, my error are channel ? In zaptel.conf, its fxsks=1 and in zapata.conf it's channel = 0 no ? ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Noc Phibee wrote: Thanks for your help, a cat: [EMAIL PROTECTED] zap]# cat /proc/zaptel/1 Span 1: WCTDM/0 Wildcard TDM400P REV I Board 1 1 WCTDM/0/0 FXSKS 2 WCTDM/0/1 3 WCTDM/0/2 4 WCTDM/0/3 in my zaptel.conf, i have only: loadzone=fr defaultzone=fr fxsks=1 and zapata.conf: [trunkgroups] [channels] context=default signalling=fxs_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no busydetect=yes musiconhold=default callerid=Filtrinov0477530573 channel = 5 if i understand, my error are channel ? In zaptel.conf, its fxsks=1 and in zapata.conf it's channel = 0 no ? Hi, The cat output suggests that channel number 1 is configured(as fxsks) by the zaptel kernel module as instructed in the zaptel.conf file. So, you should have : channel=1 instead of channel=5 and signalling=fxs_ks instead of signalling=fxs_ls (mark the 'k' and 'l') in zapata.conf This will tell the chan_zap module to use the channel that is actually initialised by the driver in the kernel i.e channel no 1.Currently chan_zap must be looking for a configured channel number 5 which is not present on the system.That is why it fails. Hopefully, doing the above will fix it :) Best regards, Pranav We don't see things as they are, we see them as we are. - Anais Nin ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
A summary of some of the mistakes in this thread, as it was full of them. On Fri, Nov 24, 2006 at 06:32:14AM +0100, Noc Phibee wrote: Hi i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect my asterisk to a french analog line. In my zaptel.conf, i have: loadzone=fr defaultzone=fr fxols=3 An FXO module needs FXS signalling: fxsls=3 And probably fxsks=3: I'm not sure whether or not KS is used in the French telco . Didn't you know this obvious fact? And what is the channel number of this module? when i load the module, i have in logs: Nov 24 06:13:40 gw kernel: Freed a Wildcard Nov 24 06:13:40 gw kernel: Zapata Telephony Interface Unloaded Nov 24 06:13:40 gw zaptel: Removing zaptel module: succeeded Nov 24 06:13:42 gw kernel: Zapata Telephony Interface Registered on major 196 Nov 24 06:13:42 gw kernel: Zaptel Version: 1.2.9.1-1mdv2007.0 Echo Canceller: KB1 Nov 24 06:13:42 gw zaptel: Loading zaptel framework: succeeded Nov 24 06:13:42 gw kernel: ACPI: PCI Interrupt :02:0a.0[A] - GSI 21 (level, low) - IRQ 20 Nov 24 06:13:43 gw kernel: Freshmaker version: 73 Nov 24 06:13:43 gw kernel: Freshmaker passed register test Nov 24 06:13:43 gw kernel: Module 0: Not installed Nov 24 06:13:43 gw kernel: Module 1: Not installed Nov 24 06:13:43 gw kernel: Module 2: Not installed Nov 24 06:13:43 gw kernel: Module 3: Installed -- AUTO FXO (FCC mode) The card reports that first three slots are unused, and only slot 4 is used. You should have known that this is a zero-based counting, whereas the counting of Zaptel channels is 1-based. Luckily for you you have just one card, and didn't need any further offsets calculations. Those two tiny this are obvious to us who havve been messing long enough with Zaptel. However they are far from being intuitive. My suggestions: either: * Use genzaptelconf from xpp/utils/genzaptelconf to save you from this guesswork. Or: * Apply http://bugs.digium.com/view.php?id=7613 (preferably with some optimizations from the wctdm driver itself, but the latter is clearly not my department). -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Tzafrir Cohen wrote: And probably fxsks=3: I'm not sure whether or not KS is used in the French telco . signalling=fxs_ks works Ok in France with both: France Telecom and Freebox. AF. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Tzafrir Cohen a écrit : * Use genzaptelconf from xpp/utils/genzaptelconf to save you from this guesswork. Hi, thanks ;=) with genzaptelconf, now that's works ... correct channel are put into zaptel.conf and zapata.conf small question if you know the TDM400P: if the fxo module are at the slot 4, the RJ11 connector are the number 4 ? a show channels done: gw*CLI zap show channels Chan Extension Context Language MusicOnHold pseudointerne 4interne gw*CLI gw*CLI zap show status Description Alarms IRQ bpviol CRC4 Wildcard TDM400P REV I Board 1 OK 0 0 0 now, i can add to my extension ZAP/4 ;=) for see if the card answer, what is the process ? very very thanks at all for this result ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
In my zaptel.conf, i have: loadzone=fr defaultzone=fr fxols=3 loadzone=fr defaultzone=fr fxsls=4 my zapata.conf: [trunkgroups] [channels] context=default signalling=fxo_ls signalling=fxs_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no busydetect=yes musiconhold=default channel = 3 channel=4 run ztcfg -vv a restart asterisk ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Noc Phibee wrote: small question if you know the TDM400P: if the fxo module are at the slot 4, the RJ11 connector are the number 4 ? accordingly to the documentation I have, yes, it's the connector #4. btw, why don't you put your module to the first slot? In this case you would avoid this mess with the numbers... AF. ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
for see if the card answer, what is the process ? since your port is configured to be in the interne context, just add this to this context exten = s,1,Answer exten = s,2,Playback(tt-monkeys) exten = s,3,Hangup watch the console and dial-in. if you get monkeys screaming at you, it worked ! hth ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
Hi, i receive a call on my analog line but my asterisk don't answer ;=) do you know if they hae a solution for know if the card see the call ? for see if it's not my cable don't work .. thanks bye ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [asterisk-users] Asterisk and TDM400P ?
On Fri, Nov 24, 2006 at 02:25:38PM +0100, Anton Frolov wrote: Tzafrir Cohen wrote: And probably fxsks=3: I'm not sure whether or not KS is used in the French telco . signalling=fxs_ks Nitpicking: 'signalling=fxs_ks' is the line to add to /etc/asterisk/zapata.conf . 'fxsks=4' is the line to put in /etc/zaptel.conf works Ok in France with both: France Telecom and Freebox. Thanks -- Tzafrir Cohen icq#16849755jabber:[EMAIL PROTECTED] +972-50-7952406 mailto:[EMAIL PROTECTED] http://www.xorcom.com iax:[EMAIL PROTECTED]/tzafrir ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[asterisk-users] Asterisk and TDM400P ?
Hi i have buy a Digium TDM400P with 1 fxo modules TDM01B for connect my asterisk to a french analog line. In my zaptel.conf, i have: loadzone=fr defaultzone=fr fxols=3 when i load the module, i have in logs: Nov 24 06:13:40 gw kernel: Freed a Wildcard Nov 24 06:13:40 gw kernel: Zapata Telephony Interface Unloaded Nov 24 06:13:40 gw zaptel: Removing zaptel module: succeeded Nov 24 06:13:42 gw kernel: Zapata Telephony Interface Registered on major 196 Nov 24 06:13:42 gw kernel: Zaptel Version: 1.2.9.1-1mdv2007.0 Echo Canceller: KB1 Nov 24 06:13:42 gw zaptel: Loading zaptel framework: succeeded Nov 24 06:13:42 gw kernel: ACPI: PCI Interrupt :02:0a.0[A] - GSI 21 (level, low) - IRQ 20 Nov 24 06:13:43 gw kernel: Freshmaker version: 73 Nov 24 06:13:43 gw kernel: Freshmaker passed register test Nov 24 06:13:43 gw kernel: Module 0: Not installed Nov 24 06:13:43 gw kernel: Module 1: Not installed Nov 24 06:13:43 gw kernel: Module 2: Not installed Nov 24 06:13:43 gw kernel: Module 3: Installed -- AUTO FXO (FCC mode) Nov 24 06:13:43 gw kernel: Found a Wildcard TDM: Wildcard TDM400P REV I (1 modules) Nov 24 06:13:44 gw kernel: Registered tone zone 2 (France) Nov 24 06:13:44 gw zaptel: Running ztcfg: succeeded and my problems are whit all sample that i have, asterisk don't restart and put me: Nov 24 06:15:17 NOTICE[2943] cdr.c: CDR simple logging enabled. Nov 24 06:15:17 WARNING[2943] chan_zap.c: Unable to specify channel 3: No such device Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to open channel 3: No such device here = 0, tmp-channel = 3, channel = 3 Nov 24 06:15:17 ERROR[2943] chan_zap.c: Unable to register channel '3' Nov 24 06:15:17 WARNING[2943] loader.c: chan_zap.so: load_module failed, returning -1 Nov 24 06:15:17 WARNING[2943] loader.c: Loading module chan_zap.so failed! for all channel (i have tested from 1 to 5) my zapata.conf: [trunkgroups] [channels] context=default signalling=fxo_ls usecallerid=yes hidecallerid=no callwaiting=yes usecallingpres=yes callwaitingcallerid=yes threewaycalling=yes transfer=yes canpark=yes cancallforward=yes callreturn=yes echocancel=yes echocancelwhenbridged=yes rxgain=0.0 txgain=0.0 group=1 callgroup=1 pickupgroup=1 immediate=no busydetect=yes musiconhold=default channel = 3 where is my errors ? Thanks for your help ___ --Bandwidth and Colocation provided by Easynews.com -- asterisk-users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] Asterisk 1.2.1 + TDM400P + fax machine unreliable ?
Hi, I have a running asterisk 1.2.1 (bristuffed) with a TDM400 Board. Connected to 1 port is am ordanary Fax Machine. Everything 'seems' to work, however receiving faxes is very unreliable. Sometimes I receive a normal page, without problems. Sometimes half of a page and the rest is scrambled, but most often, I receive nothing and the other site reports a Fax error... The Fax machine works very reliable with a standard Telco POTS line. Who has a 'good' working solution to connect an ordinary Fax Machine to Asterisk ? Thanks for any help. Alex Parts of my setup: Asterisk 1.2.1-BRIstuffed-0.3.0-PRE-1d built by root @ pbx on a i686 running Linux on 2006-01-05 13:25:25 UTC # cat /etc/zaptel.conf loadzone=be defaultzone=be span=1,1,3,ccs,ami bchan=1-2 dchan=3 span=2,1,3,ccs,ami bchan=4-5 dchan=6 span=3,1,3,ccs,ami bchan=7-8 dchan=9 span=4,1,3,ccs,ami bchan=10-11 dchan= 12 # TDM400P fxoks=13-16 # cat /proc/zaptel/5 Span 5: WCTDM/0 Wildcard TDM400P REV I Board 1 13 WCTDM/0/0 FXOKS (In use) 14 WCTDM/0/1 FXOKS (In use) 15 WCTDM/0/2 FXOKS (In use) 16 WCTDM/0/3 FXOKS (In use) Part of /etc/asterisk/zapata.conf: [channels] ; Default language language=be callerid=asreceived immediate=no switchtype=euroisdn cut the ISDN (bristuff) part of it.. ; ; TDM40B kanalen ; signalling=fxo_ks language=be context=analog echocancel=no channel = 13 signalling=fxo_ks language=be context=analog echocancel=no channel = 14 signalling=fxo_ks language=be context=analog echocancel=no channel = 15 signalling=fxo_ks language=be context=analog echocancel=no channel = 16 # Part of extensions.conf ; filter de Fax exten = 15504409,1,Dial(Zap/13,60) exten = 15504409,2,Hangup ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] Asterisk 1.2.1 + TDM400P + fax machine unreliable ?
Alex Ongena wrote: I have a running asterisk 1.2.1 (bristuffed) with a TDM400 Board. Connected to 1 port is am ordanary Fax Machine. Everything 'seems' to work, however receiving faxes is very unreliable. http://www.digium.com/index.php?menu=product_detailcategory=hardwareproduct=TDM400Ptab=support (see the last list item) in other words: it often does not work. regards frank ___ --Bandwidth and Colocation provided by Easynews.com -- Asterisk-Users mailing list To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
Hi list, i'm having a problem with asterisk+pstn termination, i just bought a TDM400p and connect my phone line(bellsouth) now when im using the pstn through asterisk there's an echo, i don't know if this is already have been resolved. If it does please point me to the instruction how to resolve this. Try reading README.fxotune and using fxotune to see if it improves it. If you do an fxotune and all of the coefficients are 0, does this mean that fxotune is not making any changes? I've got 6 lines that are coming from a channel bank into two TDM cards and have significant echo, even with Asterisk HEAD and KB1. I just ran fxotune, and all 6 lines came back with all 0's in fxotune.conf... Based on what Matt has mentioned previously, fxotune only sets the impedence to proper values today. He has not implemented the code to set the coefficients as yet, therefore the expected values are zero's. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
[EMAIL PROTECTED] wrote on 10/27/2005 08:22:04 AM: If you do an fxotune and all of the coefficients are 0, does this mean that fxotune is not making any changes? Based on what Matt has mentioned previously, fxotune only sets the impedence to proper values today. He has not implemented the code to set the coefficients as yet, therefore the expected values are zero's. Are these settings persistent across reboots? The README for fxotune seems to mention that you need to do a fxotune -s in order to reload the card with the analyzed settings (rather than take the 20 minutes it seems to take on my 6 lines). However, if fxotune.conf is all 0's, I sure hope that the settings are persistent on the board! :) Tim Massey ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
RE: [Asterisk-Users] asterisk using tdm400p has echo
I had to turn on the aggressive echo cancellation in the zaptel drivers for mine. Which is much better, but we still get occasional pops. The funny part is only the asterisk side of the connection hears the echo. Jared Armstrong -Original Message- From: Rich Adamson [mailto:[EMAIL PROTECTED] Sent: Thursday, October 27, 2005 8:22 AM To: Asterisk Users Mailing List - Non-Commercial Discussion Subject: Re: [Asterisk-Users] asterisk using tdm400p has echo Hi list, i'm having a problem with asterisk+pstn termination, i just bought a TDM400p and connect my phone line(bellsouth) now when im using the pstn through asterisk there's an echo, i don't know if this is already have been resolved. If it does please point me to the instruction how to resolve this. Try reading README.fxotune and using fxotune to see if it improves it. If you do an fxotune and all of the coefficients are 0, does this mean that fxotune is not making any changes? I've got 6 lines that are coming from a channel bank into two TDM cards and have significant echo, even with Asterisk HEAD and KB1. I just ran fxotune, and all 6 lines came back with all 0's in fxotune.conf... Based on what Matt has mentioned previously, fxotune only sets the impedence to proper values today. He has not implemented the code to set the coefficients as yet, therefore the expected values are zero's. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
On Oct 27, 2005, at 12:18 AM, [EMAIL PROTECTED] wrote: [EMAIL PROTECTED] wrote on 10/26/2005 05:09:30 PM: On Oct 26, 2005, at 3:40 PM, Mark Quitoriano wrote: Hi list, i'm having a problem with asterisk+pstn termination, i just bought a TDM400p and connect my phone line(bellsouth) now when im using the pstn through asterisk there's an echo, i don't know if this is already have been resolved. If it does please point me to the instruction how to resolve this. Try reading README.fxotune and using fxotune to see if it improves it. If you do an fxotune and all of the coefficients are 0, does this mean that fxotune is not making any changes? I've got 6 lines that are coming from a channel bank into two TDM cards and have significant echo, even with Asterisk HEAD and KB1. I just ran fxotune, and all 6 lines came back with all 0's in fxotune.conf... Try the new echo canceller in head. It's an update to KB1 called MG2. You'll have to enable it in zconfig.h kind like with KB1. You can post feedback to bug #5120 on mantis. Matthew Fredrickson ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
On Oct 27, 2005, at 12:02 AM, Mark Quitoriano wrote: i tried doing the instruction from voip-info[1] anyway here's my comment with that instruction. when i tried doing /usr/src/zaptel/fxotune -i 4 it gives me this Tuning module 1Failure! Tuning module 2Failure! Tuning module 3Failure! Tuning module 4Failure! how can i debug this? i look at my /var/log/messages and it gives me many of this line Oct 26 17:36:06 sloan kernel: — Set echo registers successfully Oct 26 17:36:25 sloan kernel: — Setting echo registers: I'm using AAH 1.5 stock no modifications. I think they're using versions 1.0.9 for all(e.g. asterisk, zaptel). Don't use 1.0.9. It's old. Try the version of fxotune from head. Matthew Fredrickson ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
On Oct 27, 2005, at 10:25 AM, Jared Armstrong wrote: I had to turn on the aggressive echo cancellation in the zaptel drivers for mine. Which is much better, but we still get occasional pops. The funny part is only the asterisk side of the connection hears the echo. If you have bad echo problems, we just put a new echo canceler (or rather updates to an old one) into CVS. It's based on KB1, and it's called MG2. It might improve your performance. Matthew Fredrickson ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
If you do an fxotune and all of the coefficients are 0, does this mean that fxotune is not making any changes? Based on what Matt has mentioned previously, fxotune only sets the impedence to proper values today. He has not implemented the code to set the coefficients as yet, therefore the expected values are zero's. Are these settings persistent across reboots? The README for fxotune seems to mention that you need to do a fxotune -s in order to reload the card with the analyzed settings (rather than take the 20 minutes it seems to take on my 6 lines). However, if fxotune.conf is all 0's, I sure hope that the settings are persistent on the board! :) The results of fxotune is written to /etc/fxotune.conf; I don't believe they are read back in unless you build something into a bootup script. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
[EMAIL PROTECTED] has the Zaptel from head. Just need to update the zaptel drivers from CVS head you don't have to upgrade the asterisk. Matthew Fredrickson wrote: On Oct 27, 2005, at 12:02 AM, Mark Quitoriano wrote: i tried doing the instruction from voip-info[1] anyway here's my comment with that instruction. when i tried doing /usr/src/zaptel/fxotune -i 4 it gives me this Tuning module 1Failure! Tuning module 2Failure! Tuning module 3Failure! Tuning module 4Failure! how can i debug this? i look at my /var/log/messages and it gives me many of this line Oct 26 17:36:06 sloan kernel: — Set echo registers successfully Oct 26 17:36:25 sloan kernel: — Setting echo registers: I'm using AAH 1.5 stock no modifications. I think they're using versions 1.0.9 for all(e.g. asterisk, zaptel). Don't use 1.0.9. It's old. Try the version of fxotune from head. Matthew Fredrickson ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
[EMAIL PROTECTED] wrote on 10/27/2005 03:11:11 PM: Are these settings persistent across reboots? The README for fxotune seems to mention that you need to do a fxotune -s in order to reload the card with the analyzed settings (rather than take the 20 minutes it seems to take on my 6 lines). However, if fxotune.conf is all 0's, I sure hope that the settings are persistent on the board! :) The results of fxotune is written to /etc/fxotune.conf; I don't believe they are read back in unless you build something into a bootup script. Correct. From the README: It will write a configuration file to /etc/fxotune.conf. You will need to have your system run fxotune with the -s flag (`fxotune -s`) to set the module with the previously discovered values from fxotune.conf for it to take affect, so essentially if each time you reboot the machine you need to run `fxotune -s`. You might consider putting it in your startup scripts some time after the module loads and before asterisk runs. However, my fxotune.conf contains only 0's for all 8 of each of 6 lines. I'm wondering does that mean that fxotune had no effect, or that whatever effect it does have is A) Persistent within the card between reboots and B) Not reflected by a fxotune.conf filled with 0's... Tim Massey ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
On Oct 27, 2005, at 3:35 PM, [EMAIL PROTECTED] wrote: However, my fxotune.conf contains only 0's for all 8 of each of 6 lines. I'm wondering does that mean that fxotune had no effect, or that whatever effect it does have is A) Persistent within the card between reboots and B) Not reflected by a fxotune.conf filled with 0's... If you ran it from an older version of the utility (older than a month I would say) I would re-run it just in case. Also, even for all 0's, you want it to set it at boot. I'm not sure that I trust that all of the registers that this effects are initialized to 0 by default. Matthew Fredrickson ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
Are these settings persistent across reboots? The README for fxotune seems to mention that you need to do a fxotune -s in order to reload the card with the analyzed settings (rather than take the 20 minutes it seems to take on my 6 lines). However, if fxotune.conf is all 0's, I sure hope that the settings are persistent on the board! :) The results of fxotune is written to /etc/fxotune.conf; I don't believe they are read back in unless you build something into a bootup script. Correct. From the README: It will write a configuration file to /etc/fxotune.conf. You will need to have your system run fxotune with the -s flag (`fxotune -s`) to set the module with the previously discovered values from fxotune.conf for it to take affect, so essentially if each time you reboot the machine you need to run `fxotune -s`. You might consider putting it in your startup scripts some time after the module loads and before asterisk runs. However, my fxotune.conf contains only 0's for all 8 of each of 6 lines. I'm wondering does that mean that fxotune had no effect, or that whatever effect it does have is A) Persistent within the card between reboots and B) Not reflected by a fxotune.conf filled with 0's... When wctdm is loaded, the registers in the chipsets on the TDM card get initialized. That implies whatever was there is overwritten. The default register values have been preprogrammed into the driver for some time, and those defaults are those applicable to the US telephone lines. So, if you're using a TDM card in the US, the fxotune functions provided today don't really add any value to the operation of the card since those values are already programmed (eg, impedence). I'm assuming (but haven't bothered to look) that if the card is used in a non-US location, the loadzone parameter in /etc/zaptel.conf changes the impedence setting to what is appropriate for that country. If that is case, then the current value of running fxotune is apparently zero. About a year or so ago, I played around with changing the coefficients manually and did not find where those changes had any significant impact on audio quality (including echo). But, there has been many changes and improvements within zaptel and the canceller where maybe playing with the coefficients might now be noticed. The echo issue seems to always come back to the software canceller and how well it performs in various environments. Those that have attempted to optimize the canceller have indicated its previous operating range is rather limited when compared to dedicated cancellers. I only know enough about it to know that I don't have the knowledge or background to offer improvements, but I do understand the issues. Matt has been working on canceller improvements including the MG2 that he posted today. So, gut feeling (as of this moment anyway) is that fxotune is not the answer to echo. The changes being made involving the canceller have had very noticable improvements starting with the KB canceller. (Now off to play with MG2. :) Rich ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
[Asterisk-Users] asterisk using tdm400p has echo
Hi list, i'm having a problem with asterisk+pstn termination, i just bought a TDM400p and connect my phone line(bellsouth) now when im using the pstn through asterisk there's an echo, i don't know if this is already have been resolved. If it does please point me to the instruction how to resolve this. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
On Oct 26, 2005, at 3:40 PM, Mark Quitoriano wrote: Hi list, i'm having a problem with asterisk+pstn termination, i just bought a TDM400p and connect my phone line(bellsouth) now when im using the pstn through asterisk there's an echo, i don't know if this is already have been resolved. If it does please point me to the instruction how to resolve this. Try reading README.fxotune and using fxotune to see if it improves it. Also make sure that you're using the latest version of zaptel (with the KB1 echo canceler). If that still gives you echo, try using the patch for bug 5520 and change your echo canceler to that to see if it improves your echo. Matthew Fredrickson ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
Hi list, i'm having a problem with asterisk+pstn termination, i just bought a TDM400p and connect my phone line(bellsouth) now when im using the pstn through asterisk there's an echo, i don't know if this is already have been resolved. If it does please point me to the instruction how to resolve this. Yes, but only a couple hundred times or so (check the archives). What version of asterisk are you running (cvs-head, stable, 1.2)? Might start with something like this in your zapata.conf: [channels] language=en ; the following added to handle callers that hang up on VM. busydetect=yes busycount=6 cidsignalling=bell cidstart=ring callerid=asreceived context=inbound-bus-dialin signalling=fxs_ks echocancel=yes echotraining=800 echocancelwhenbridged=yes rxgain=3 txgain=0 musiconhold=default channel = 1 You'll need to play with rxgain txgain for your implementation as the value used is specific to how far your asterisk system is from the central office. You might start with high values (eg, 5) and reduce the values until the echo is minimal. Remember, changes to zapata.conf requires a complete restart of asterisk, not just a reload. If you go too low, dtmf will fail and talking with anyone via the pstn will be difficult at best. ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
[EMAIL PROTECTED] wrote on 10/26/2005 05:09:30 PM: On Oct 26, 2005, at 3:40 PM, Mark Quitoriano wrote: Hi list, i'm having a problem with asterisk+pstn termination, i just bought a TDM400p and connect my phone line(bellsouth) now when im using the pstn through asterisk there's an echo, i don't know if this is already have been resolved. If it does please point me to the instruction how to resolve this. Try reading README.fxotune and using fxotune to see if it improves it. If you do an fxotune and all of the coefficients are 0, does this mean that fxotune is not making any changes? I've got 6 lines that are coming from a channel bank into two TDM cards and have significant echo, even with Asterisk HEAD and KB1. I just ran fxotune, and all 6 lines came back with all 0's in fxotune.conf... Tim Massey ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users
Re: [Asterisk-Users] asterisk using tdm400p has echo
i tried doing the instruction from voip-info[1] anyway here's my comment with that instruction. when i tried doing /usr/src/zaptel/fxotune -i 4 it gives me this Tuning module 1Failure! Tuning module 2Failure! Tuning module 3Failure! Tuning module 4Failure! how can i debug this? i look at my /var/log/messages and it gives me many of this line Oct 26 17:36:06 sloan kernel: — Set echo registers successfully Oct 26 17:36:25 sloan kernel: — Setting echo registers: I'm using AAH 1.5 stock no modifications. I think they're using versions 1.0.9 for all(e.g. asterisk, zaptel). [1]http://www.voip-info.org/wiki/index.php?page_id=2403 On 10/27/05, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote: [EMAIL PROTECTED] wrote on 10/26/2005 05:09:30 PM: On Oct 26, 2005, at 3:40 PM, Mark Quitoriano wrote: Hi list, i'm having a problem with asterisk+pstn termination, i just bought a TDM400p and connect my phone line(bellsouth) now when im using the pstn through asterisk there's an echo, i don't know if this is already have been resolved. If it does please point me to the instruction how to resolve this. Try reading README.fxotune and using fxotune to see if it improves it. If you do an fxotune and all of the coefficients are 0, does this mean that fxotune is not making any changes? I've got 6 lines that are coming from a channel bank into two TDM cards and have significant echo, even with Asterisk HEAD and KB1. I just ran fxotune, and all 6 lines came back with all 0's in fxotune.conf... Tim Massey ___--Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing listAsterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-usersTo UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users-- Regards,Mark Quitoriano, CCNAhttp://www.atamanetworks.com Fan the flame...http://www.spreadfirefox.com/?q=user/registerr=19441 ___ --Bandwidth and Colocation sponsored by Easynews.com -- Asterisk-Users mailing list Asterisk-Users@lists.digium.com http://lists.digium.com/mailman/listinfo/asterisk-users To UNSUBSCRIBE or update options visit: http://lists.digium.com/mailman/listinfo/asterisk-users