Tod kindly provided me with a gdb, and ZAP looks like it is the problem
area. However I think I need a version of Astlinux 0.6.2 which is
compiled with debug symbols before I can go any further.
(gdb) bt full
#0 0x0809c1fb in ast_frame_free ()
No symbol table info available.
#1 0x40322504 in ??
Martin Rogers wrote:
Tod kindly provided me with a gdb, and ZAP looks like it is the problem
area. However I think I need a version of Astlinux 0.6.2 which is
compiled with debug symbols before I can go any further.
(gdb) bt full
#0 0x0809c1fb in ast_frame_free ()
No symbol table info
Darrick
thank you for your reply.
My hardware is a TDM400P with 2 * FXO and 1 * FXS daughter boards
It has been working fine for the last year. The problems have only come
about (coincidentally) since going to 0.6.2, and more significantly
since the temperature has dropped. This particular box
On Dec 18, 2008, at 8:19 AM, Martin Rogers wrote:
Darrick
thank you for your reply.
My hardware is a TDM400P with 2 * FXO and 1 * FXS daughter boards
It has been working fine for the last year. The problems have only
come
about (coincidentally) since going to 0.6.2, and more
Darrick
thank you for your reply.
My hardware is a TDM400P with 2 * FXO and 1 * FXS daughter boards
It has been working fine for the last year. The problems have only come
about (coincidentally) since going to 0.6.2, and more significantly
since the temperature has dropped. This particular box
Michael,
thanks for your reply. I will bear this in mind.
Mart
Hi Martin,
I had a similar problem with my Soekris net4801 and a 1-port HFC ISDB
card. The box was crashing every few days or sometimes just Asterisk
was silently crashing.
Because I still had warrenty for it, I sent
Re: [Astlinux-users] Asterisk exiting
From: Martin Rogers fromastlinux-us...@mh... - 2008-12-16 00:05
Hi
This box has been fine for a couple of days but has just ditched 0.6.2
back to the OS prompt again
Can anyone advise on how I can capture debug trace info ready for the
next time it does
Tod
thanks for your link. I will continue to monitor this to try and work
out what is going on.
Mart
Tod Fitch wrote:
Mart,
I personally prefer to figure out what is wrong but if you simply want
to keep things running then you could do this
Tod,
there is nothing of interest in either log file. I guess I should
really be running with 0.6.2 so it that would be one worthwhile change I
could make.
I will look into setting up syslog on the phones. Thanks for the
suggestions.
regards
Mart
Tod Fitch wrote:
Not much help, but my
I am experiencing an odd problem since going to 0.6.1 (via) running on a
Wyse Winterm box. The 0.6.1 upgrade could coincidental, my purpose in
mentioning it here is to see if I can narrow down the cause based on
others' experiences.
Very simply, if I leave the PBX powered on overnight, in the
Not much help, but my Soekris net5501 running 0.6.2 has been up since
the day after 0.6.2 was released. Previously I was experimenting with
0.6.1 and did not notice any issues of that nature.
Is there in anything in /var/log/messages or /var/log/secure?
My phones are set to syslog to a Unix
11 matches
Mail list logo