Hi,
16.04.2009 00:42, Reynier Perez Mira wrote:
Actually, I'm currently in the process of writing a small paper
describing how to do that.
Thanks a lot, I find over Internet and without success.
At this time, I'm quite at the start :-) but you might ping me in a
week or so (this depends
I am using one disk volume per job, and I would like to run multiple
backups at once. This would require the storage daemon to have multiple
volumes open at once. Is this supported? I would have guess not, but the
docs say ... This can be avoided by having each simultaneous job write
to a
Dear All
Each week I rotate through a set of tapes. I unmounted and ejected tape
from one set. Placed first tape of next set in unit but forgot to mount it.
A migration job started but never sent an email to mount a tape. The
devices was flagged as BLOCKED.
When migration jobs fill the tape
Hi all,
I contact you because I need to understand very well the behavior of bacula in
a particular case. I have two jobs which write in the same Pool/Volume, but
they use different Storage. They are executed at the same time. In my Pool, I
have VolumeRetention = 30d and Maximum Volumes = 31.
On Wed, Apr 15, 2009 at 09:34:30PM +0200, Andreas Schuldei wrote:
tonight i ran my very first concurrent backup and the backup time went
down nicely. yay.
when trying to restore something from the backup i got this:
...
Files Expected: 1
Files Restored: 0
Hello,
I
Hello,
Do you have the same problem as this one :
http://www.nabble.com/file-count-mismatch-tt19508099.html ?
(It's an old post of mine, but I never received any feedback)
Julien
On Thu, 2009-04-16 at 09:03 +0100, Graham Keeling wrote:
On Wed, Apr 15, 2009 at 09:34:30PM +0200, Andreas
Hi
I did a full backup of a SVN source tree on a different machine. Now, when I
am trying to use restore all, I see the following message during the
process:
Select the Client (1-2): 2
Automatically selected FileSet: File set for chandranshu-desktop
On Thu, Apr 16, 2009 at 10:03 AM, Graham Keeling gra...@equiinet.com wrote:
On Wed, Apr 15, 2009 at 09:34:30PM +0200, Andreas Schuldei wrote:
tonight i ran my very first concurrent backup and the backup time went
down nicely. yay.
when trying to restore something from the backup i got this:
On Thu, Apr 16, 2009 at 10:33 AM, Julien Cigar jci...@ulb.ac.be wrote:
Do you have the same problem as this one :
http://www.nabble.com/file-count-mismatch-tt19508099.html ?
no, mine is differnt: the byte count for the restored data was 0 for
me, and i checked the restore location and it was
Hi John,
Do you want to email me the solution?
I'm a little bit confused regarding your repley :)
+--
|This was sent by karel.strie...@gmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
On Tue, 14 Apr 2009, Kelly, Brian wrote:
I've seen posts regarding attribute inserts as a performance issue even when
modern 10K 15K drives are being used. I backup 800 clients every night.
Interesting, does anyone know a bacula system with more clients?
How many concurrent clients do you
Hi folks,
the recent talk here of a bug relating to concurrent writes to a
single backup volume has made me a bit uneasy about one of our
production bacula servers.
We have one system with two tape libraries (so no single volume is
used by two backups at the same time), however the other system
On Thu, 16 Apr 2009 08:46:15 +0800, Craig Ringer said:
Martin Simmons wrote:
On Wed, 15 Apr 2009 11:58:08 +0800, Craig Ringer said:
Anyway, the expanded schema:
[snip]
Thanks, I was wondering what you had done about integers. Is integer a
32-bit
quantity?
Yes.
Beware
Hi,
Please find attached the changed mysql.c file. Do let me know if you'd
prefer the patch to the complete file as I'm not aware of the code
submission practices for Bacula.
I have used Dmsg with a level of 50. Please change it as you deem
appropriate. (I thought Emsg would be more appropriate
[Kern Sibbald]:
[Chandranshu]:
[I] modified the code in src/cats/mysql.c to print the error
message returned by mysql_error(). Then, I compiled and ran the
code to see the most dubious error in my DBA career:
Error 2002 (HY000): Can't connect to local MySQL server through
socket
Hi John,
Do you want to email me the solution?
I'm a little bit confused regarding your reply :)
+--
|This was sent by karel.strie...@gmail.com via Backup Central.
|Forward SPAM to ab...@backupcentral.com.
On Thursday 16 April 2009 11:26:24 Kjetil Torgrim Homme wrote:
[Kern Sibbald]:
[Chandranshu]:
[I] modified the code in src/cats/mysql.c to print the error
message returned by mysql_error(). Then, I compiled and ran the
code to see the most dubious error in my DBA career:
Error 2002
We have a bacula-dir system which is waiting for manual intervention for
some days time now. Due to technical problems with the tape drive, the
problem will be with us for a few more days.
Memory consumption of the bacula-dir process is rather high though
according to top:
PID USER PR
Hi,
16.04.2009 09:04, James Harper wrote:
I am using one disk volume per job, and I would like to run multiple
backups at once. This would require the storage daemon to have multiple
volumes open at once.
Right. More in Bacula terms, you'd need several storage devices.
Is this supported?
Hi,
16.04.2009 09:45, François Mehault wrote:
Hi all,
I contact you because I need to understand very well the behavior of
bacula in a particular case. I have two jobs which write in the same
Pool/Volume, but they use different Storage. They are executed at the
same time. In my
Hi,
16.04.2009 09:45, Stephen Carr wrote:
Dear All
Each week I rotate through a set of tapes. I unmounted and ejected tape
from one set. Placed first tape of next set in unit but forgot to mount it.
That's the key issue - Bacula doesn't notify for unmounted devices as
it assumes the
On Thu, Apr 16, 2009 at 12:15:18PM +0200, Uwe Schuerkamp wrote:
Hi folks,
the recent talk here of a bug relating to concurrent writes to a
single backup volume has made me a bit uneasy about one of our
production bacula servers.
We have one system with two tape libraries (so no single
On Thu, Apr 16, 2009 at 5:45 AM, Karel bacula-fo...@backupcentral.com wrote:
Hi John,
Do you want to email me the solution?
I do not know what is wrong. See my next answer.
I'm a little bit confused regarding your repley :)
Your email looks like this in my email box:
Maximum concurrent Jobs is set to 50 on each storage deamon. I've set the
Director to Maximum concurrent jobs of 110.
I'm running 64 bit Gentoo on the Director, MySQL server, and the Storage
daemons. Up until moving the Mysql server to SSD drives on different box I
was running both the Director
Craig Ringer cr...@postnewspapers.com.au writes:
[A] AFAIK all it _needs_ for restore is:
- File name
- [st_size] File size in bytes (for restore verification)
- md5sum
neither md5sum nor filename are
Kelly, Brian brian.ke...@uwsp.edu writes:
I've seen lots of posts regarding the decoding of Lstat data. I'm
currently using a few functions to decoded the lstat data and make
it human readable. These functions have been tested and are known
to work with mysql 5.0.70
hi, I spent quite a bit
(I'm dreading the switch to 3.0... I seriously doubt I'll be able to
do it in 24 hours, and I don't like the thought of a day without
backups. but we'll see.)
BTW, you do not have to upgrade clients so only the director and sds
are needed to be upgraded.
--
John M. Drescher
John Drescher dresche...@gmail.com writes:
(I'm dreading the switch to 3.0... I seriously doubt I'll be able
to do it in 24 hours, and I don't like the thought of a day without
backups. but we'll see.)
BTW, you do not have to upgrade clients so only the director and sds
are needed to be
Client and server at 2.4.4. Both client and server are Linux 2.6
Logs from client:
15-Apr 16:53 tibor-dir JobId 2954: Start Backup JobId 2954,
Job=Belobog-Data-Users.2009-04-15_16.32.07.04
15-Apr 16:53 tibor-dir JobId 2954: Using Volume 100108L2 from 'Scratch' pool.
15-Apr
I would certainly prefer to install from an rpm, etc. But I'm running
Centos 5 and for my distro there is neither QT 4.2 nor Bacula 3.0
yet, from our friend FSchwartz, or from RPMForge or from ATRPMS.
Don't really want to change distros at this point.
Craig Ringer wrote:
Jeff Dickens
On Thu, 16 Apr 2009 10:33:43 +0800, Craig Ringer said:
[C] Things we can and should get rid of:
- [st_dev] ID of device containing file
- [st_atime] Last accessed time
- [st_ctime] Time of last
javascript:emoticon('8)') I´m looking for a GUI to Restore my Backuped files in
Mac OS Leopard. Does anyone know a good method to do this?
+--
|This was sent by cruz.c...@gmail.com via Backup Central.
|Forward SPAM to
Hello Bacula Experts, I´m looking for a GUI to restore in a Mac OS Leopard,
I´ve heard that is very similar to Linux behavior so, there is some compatible
GUI that I can use to perform a user friendly Restore?
+--
|This was
rjustinwilliams wrote:
I'm running it on my tiger box, and just use bconsole for it. I switch to a
terminal, run bconsole as root, and, from within that, simply type restore,
and it pretty well walks you through it (you can also type help if you ever
forget commands to do things, which I
Dan Langille wrote:
Folks:
sysutils/bacula-server-devel has been updated to 2.5.42.b2 (which is
pretty close to 3.0).
http://www.freshports.org/sysutils/bacula-server-devel/
I'd appreciate some feedback on this upgrade. It's pretty close to 3.x,
which is what I'll be working on
Does belobog have the same network adapter and kernel as your other
servers?
What brand (machine and network adapter), what kernel, and what network
adapter?
Could be a tcp offload issue, try disabling tso and tx csum offload on
the fd (use ethtool)
Could also be a firewall issue timing out the
John Drescher dresche...@gmail.com writes:
(I'm dreading the switch to 3.0... I seriously doubt I'll be able
to do it in 24 hours, and I don't like the thought of a day without
backups. but we'll see.)
BTW, you do not have to upgrade clients so only the director and sds
are needed
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Per olof Ljungmark wrote:
Dan Langille wrote:
Folks:
sysutils/bacula-server-devel has been updated to 2.5.42.b2 (which is
pretty close to 3.0).
http://www.freshports.org/sysutils/bacula-server-devel/
I'd appreciate some feedback on this
Dan Langille wrote:
Per olof Ljungmark wrote:
Dan Langille wrote:
Folks:
sysutils/bacula-server-devel has been updated to 2.5.42.b2 (which is
pretty close to 3.0).
http://www.freshports.org/sysutils/bacula-server-devel/
I'd appreciate some feedback on this upgrade. It's pretty close
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Per olof Ljungmark wrote:
Dan Langille wrote:
Per olof Ljungmark wrote:
Dan Langille wrote:
Folks:
sysutils/bacula-server-devel has been updated to 2.5.42.b2 (which is
pretty close to 3.0).
Greetings,
I am setting up a new bacula backup server. On my previous installation
I was mounting /var/lib/bacula from another machine. I think that I did
this because it was recommended somewhere in the bacula documentation,
but now I cannot locate this recommendation. I am wondering how
I am setting up a new bacula backup server. On my previous installation
I was mounting /var/lib/bacula from another machine. I think that I did
this because it was recommended somewhere in the bacula documentation,
but now I cannot locate this recommendation. I am wondering how helpful
this
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Andreas Thienemann wrote:
We have a bacula-dir system which is waiting for manual intervention for
some days time now. Due to technical problems with the tape drive, the
problem will be with us for a few more days.
Memory consumption of the
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Chandranshu . wrote:
Hi
I did a full backup of a SVN source tree on a different machine. Now,
when I am trying to use restore all, I see the following message during
the process:
Select the Client (1-2): 2
Martin Simmons wrote:
On Thu, 16 Apr 2009 10:33:43 +0800, Craig Ringer said:
In the above, mtime is defined as a database `timestamp' rather than
stored as the raw integer value from the source host. Note that the
database may not store timestamps with the same precision as the fd
host,
Hi,
After moving from 2.4 to 3.0, our Nagios system complains Unknown
response or somesuch.
At appears that the response from FD has changed between bacula versions
here, is that intentional?
Was: 2000 OK Hello
Is: 2000 OK Hello 1
Could someone shed a little light here?
Thanks,
--
per
46 matches
Mail list logo