Am Freitag, 18. August 2006 21:38 schrieb stefan:
Bacula comes with a command called dvd-handler it is the command that
you have in /etc/bacula/bacula-sd.conf for WritePartCommand and
FreeSpaceCommand. In your case it seems to be in /etc/bacula/dvd-handler
so using
i realy dont know where i had error
but:
19-Aug 13:23 blade-sd: End of Volume Volume6 at 74:887 on device
VXA2 (/dev/st0). Write of 64512 bytes got -1.
19-Aug 13:23 blade-sd: End of medium on Volume Volume6
Bytes=69,494,724,802 Blocks=1,077,241 at 19-Aug-2006 13:23.
19-Aug 13:27 blade-sd: Invalid
On Monday 21 August 2006 01:51, David Lebel wrote:
So, nobody is using (or trying to) IPv6 on their Windows' bacula
environment?
Hmmm. There is IPv6 code in Bacula, but it was written for *nix systems, and
even there it has not been heavily tested. I doubt very much if IPv6 works
on Windows,
On Monday 21 August 2006 08:39, Daniel Vesely wrote:
i realy dont know where i had error
but:
19-Aug 13:23 blade-sd: End of Volume Volume6 at 74:887 on device
VXA2 (/dev/st0). Write of 64512 bytes got -1.
19-Aug 13:23 blade-sd: End of medium on Volume Volume6
Bytes=69,494,724,802
What I neeed to do, is to prune all the records from the pool only
later. Reason for this is that the volumes in the pool needs to be
recycled as soon as 28 days after the last write, but the volume
needs to be valid (and must not be pruned before) up to 60 days
from the first
On Monday 21 August 2006 09:45, Timo Neuvonen wrote:
What I neeed to do, is to prune all the records from the pool only
later. Reason for this is that the volumes in the pool needs to be
recycled as soon as 28 days after the last write, but the volume
needs to be valid (and must
Hello,
(I post this again, since my first post a couple days ago did not reach the
list for some reason.)
On Monday 07 August 2006 14:01, Kern Sibbald wrote:
Is there a chance to get udev rules shipped with the Fedora RPM Packages?
Yes, this is probably a good idea because there are
Arunav Mandal wrote:
Should I have 2 different machines for Dir or SD or one machine for both.
Presently I am using 2 different.
We have one machine which is a DIR+SD and four other SDs. Either way
seems fine.
We have so many SDs because each holds quite a small amount of data, no
more than
On Thu, 17 Aug 2006, Kern Sibbald wrote:
On Thursday 17 August 2006 18:41, Jo Rhett wrote:
On Wed, Aug 16, 2006 at 08:49:19AM +0200, Kern Sibbald wrote:
On Wednesday 16 August 2006 00:48, Jo Rhett wrote:
After using bacula a lot today to do cleanup of some testing I did,
I've found that ALL
On Thu, 17 Aug 2006, Erik Dykema wrote:
Everything is working normally in all respects but one: When I
issue the label command, and give bacula a tape name, a slot number,
and a drive number, it successfully labels tapes. Example pasted
below (example 1 - working).
However, when I
Hello,
Please, ive traed to start the bacula and get
the following message:
[EMAIL PROTECTED] bin]# ./bacula start
Starting the Bacula Storage daemon
Starting the Bacula File daemon
Starting the Bacula Director daemon
17-Aug 17:05
bacula-dir: Fatal error: Version error for
I had this just the other day with a CentOS 4 (RHEL 4.0 compatible) system
and bacula 1.38.11. Someone on another forum suggested that there was a
problem with the version of the MySQL client. Iinstalled the
mysqlclient14-devel-4.1.14-4.2.c4.1.i386.rpm (although MySQL was already
running and
On Fri, 18 Aug 2006, Daniel Vesely wrote:
i have an VXA2 10U autochanger with 10 slots 1-10 but bacula think
that slots is 0-9 - so where i have setup that the slots start from
slot 1?
My autochanger numbers from one, and Bacula is working with it without
problem.
-- Michael
On Fri, 18 Aug 2006, Simon Tomlinson wrote:
I would like to configure Bacula so that individual clients can only
restore their own data (using bconsole on their own machines). At
the moment the setup I have seems to allow restore of backups
originating from any machine. What is the best
hi folks,
i´m using the famous multitape changer script to use three dlt vs80
drives in the same server, for the same sset of tapes.
Howerver, tha bacula don´t change de drives automatically when a tape
gets full.
Any help?
Heitor Faria
Esta mensagem do SERVIÇO FEDERAL DE PROCESSAMENTO DE
i realy dont know where i had error
but:
19-Aug 13:23 blade-sd: End of Volume Volume6 at 74:887 on device
VXA2 (/dev/st0). Write of 64512 bytes got -1.
19-Aug 13:23 blade-sd: End of medium on Volume Volume6
Bytes=69,494,724,802 Blocks=1,077,241 at 19-Aug-2006 13:23.
19-Aug 13:27 blade-sd: Invalid
Hi list,
please does Bacula support communication protocol, wich can I use for
building robot, wich can directly communicate with Bacula?
Thanxxx
Ondra
--
S pozdravem / Best regards
Bc.Ondrej PLANKA
-
Using Tomcat but
Hi there,
I´m using the multitape changer script trying to do the backup on three VS80
Drives, one after another.
However the script simply don´t change drives automatically when the tape
gets full. Is that normal??
The bacula keeps askink for an appendable volume.
Best Regards,
Heitor Faria
Run the upgrade script. You probably upgrade Bacula without upgrading
the database.
Also, please note that SQLite isn't recommended in production
Fredy Rodriguez -Equant wrote:
Hello,
Please, i’ve traed to start the bacula and get the following message:
[EMAIL PROTECTED] bin]#
Everyone can start by looking over the current Migration documentation
that I
have just updated at:
http://www.bacula.org/dev-manual/Migration.html
To make testing easier, I will release version 1.39.20 beta in the
next
few
days.
Outstanding! This plus the encryption support make
On Wed, 16 Aug 2006, Dirk Kleinhesselink wrote:
On Wed, 16 Aug 2006, Kern Sibbald wrote:
For what it's worth, I found that if I unloaded and re-loaded the
SCSI controller, tape (st) and generic (sg) drivers on my system (linux,
mandriva 2006) that would fix occasional problems with my tape
On Monday 21 August 2006 12:42, David Boyes wrote:
Everyone can start by looking over the current Migration documentation
that I
have just updated at:
http://www.bacula.org/dev-manual/Migration.html
To make testing easier, I will release version 1.39.20 beta in the
next
few
I'm trying to build Bacula rpm packages with Python support, on
FC5, from bacula-1.38.11-3.src.rpm source package.
I found the following from the newest documentation for the
released version, 1.38.11 (24 July 2006):
Build python scripting support:
--define build_python 1
A one month older
On Fri, 18 Aug 2006, Michael Brennen wrote:
On Fri, 18 Aug 2006, Daniel Vesely wrote:
i have an VXA2 10U autochanger with 10 slots 1-10 but bacula think
that slots is 0-9 - so where i have setup that the slots start from
slot 1?
My autochanger numbers from one, and Bacula is working with
On Sat, Aug 19, 2006 at 12:28:59AM -0700, Jo Rhett wrote:
From: Jo Rhett [EMAIL PROTECTED]
To: bacula-users@lists.sourceforge.net
Date: Sat, 19 Aug 2006 00:28:59 -0700
Subject: [Bacula-users] list of jobs in a given volume?
So I've poked around all day trying to track down an overly large
Timo Neuvonen wrote:
So, the question: Does 1.38.11-3 source rpm really contain
support for the build_python option, or has that just been added to
the documentation in advance while preparing to future releases?
There is a bacula-python.spec file which has support for the build_python
option.
Georg Lutz wrote:
Can anyone confirm this problem?
yes, seeing this problem too. Unfortunately I have very little time now to track
down the problem...
fs
-
Using Tomcat but need to do more? Need to support web services,
Is there some way to retrieve previous messages or
some log to look at to see why this is failing? The
normal backup jobs seem to be fine.
Mike
-
Using Tomcat but need to do more? Need to support web services, security?
Get
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kern
Sibbald
Sent: Monday, August 21, 2006 5:41 AM
To: [EMAIL PROTECTED]
Cc: David Boyes; bacula-users
Subject: Re: [Bacula-users] [Bacula-devel] Migration code
On Monday 21 August 2006 12:42, David Boyes
Hi,
after having installed version bacula-sqlite-1.38.11 on CentOS 4.3 the
first backup job failed with the following log:
---
21-Aug 21:00 ercws207-dir: Start Backup JobId
546,Job=StandardSicherung.2006-08-21_21.00.03
21-Aug 21:00 ercws207-dir: Purging oldest volume Tag-01
21-Aug 21:00
In terms of scheduling items.any chance to have bacula show more
than just the next jobs due to be run in the next 24 hours when you do
a stat dir?
It'd be nice to know in more advance for purposes of loading tapes if
there isn't someone on site say over a weekend as sometimes people
guess
On Sat, 19 Aug 2006, Jo Rhett wrote:
But when I try to run a restore, I see the following. Note that
none of these jobs are even in the same catalog as this client:
On Sat, Aug 19, 2006 at 01:53:14PM -0500, Michael Brennen wrote:
Have you tried setting the FileSetACL to only the FileSet for
Martin Simmons wrote:
On Wed, 16 Aug 2006 11:08:28 +0200, Kern Sibbald said:
On Wednesday 16 August 2006 00:33, Jo Rhett wrote:
On Tuesday 08 August 2006 22:29, Timo Neuvonen wrote:
It's worth noting, that the messages above don't necessarily mean
that the
filesystem mentioned wouln't be
33 matches
Mail list logo