Re: [Bacula-users] Experiences with Autochanger IBM TS3100
Hi ! Not quite sure if that helps, but we are running a similar library that identifies as 3573-TL but looks the same. We just connected it to the server (to SAS-HBA) and were able to use it with /dev/sg0 and /dev/nst0 nst1 on a RHEL5.6 which should be quite similar to Centos 5.6. Just try a mtx inquiry with the library connected and maybe create a link for /dev/changer. Best regards, Daniel On Jul 28, 2011, at 3:47 PM, selanty wrote: @patric i know the topic is old. but we have purchased a ts3100 with 2 lto5 drives. I use Centos 5.6 and have a hard time installing the Lin_tape drivers did you used them? +-- |This was sent by marcel.van.gereste...@steltix.com via Backup Central. |Forward SPAM to ab...@backupcentral.com. +-- -- Got Input? Slashdot Needs You. Take our quick survey online. Come on, we don't ask for help often. Plus, you'll get a chance to win $100 to spend on ThinkGeek. http://p.sf.net/sfu/slashdot-survey ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- . Riege Software International GmbH Phone: +49 2159 91480 Mollsfeld 10 Fax: +49 2159 914811 40670 MeerbuschWeb: www.riege.com GermanyE-Mail: holtk...@riege.com -- -- Commercial Register: Managing Directors: Amtsgericht Neuss HRB-NR 4207 Christian Riege VAT Reg No.: DE120585842 Gabriele Riege Johannes Riege . YOU CARE FOR FREIGHT, WE CARE FOR YOU -- Got Input? Slashdot Needs You. Take our quick survey online. Come on, we don't ask for help often. Plus, you'll get a chance to win $100 to spend on ThinkGeek. http://p.sf.net/sfu/slashdot-survey ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Multiple Devices in Director Storage definition
Hello ! I am testing around a bit and found something that would help a lot in my setup, but i´m not quite sure if this is a supported configuration. This way i can mount up to 4 different volumes at the same time on one storage. Please note that the Archive Device location is always the same so i don´t think i have to split up the storage definition as suggested in the manual. - bacula-dir.conf - Storage { Name = backup.mb.filestorage Address= 10.11.6.32 SDPort = 9103 Password = Device = backup.mb.filestorage-1 Device = backup.mb.filestorage-2 Device = backup.mb.filestorage-3 Device = backup.mb.filestorage-4 Media Type = backup.mb.filestorage Maximum Concurrent Jobs = 4 } - bacula-dir.conf - - bacula-sd.conf - Device { Name = backup.mb.filestorage-1 Media Type = backup.mb.filestorage Archive Device = /var/backup/storage/backup.mb.filestorage/ LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; Maximum Concurrent Jobs = 1 } Device { Name = backup.mb.filestorage-2 Media Type = backup.mb.filestorage Archive Device = /var/backup/storage/backup.mb.filestorage/ LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; Maximum Concurrent Jobs = 1 } [... and so on ...] - bacula-sd.conf - Is it intended to be used that way ? Best regards, Daniel -- transport logistic Munich 10 - 13 May 2011, B2.225 . Riege Software International GmbH Phone: +49 2159 91480 Mollsfeld 10 Fax: +49 2159 914811 40670 MeerbuschWeb: www.riege.com GermanyE-Mail: holtk...@riege.com -- -- Commercial Register: Managing Directors: Amtsgericht Neuss HRB-NR 4207 Christian Riege VAT Reg No.: DE120585842 Gabriele Riege Johannes Riege . YOU CARE FOR FREIGHT, WE CARE FOR YOU -- WhatsUp Gold - Download Free Network Management Software The most intuitive, comprehensive, and cost-effective network management toolset available today. Delivers lowest initial acquisition cost and overall TCO of any competing solution. http://p.sf.net/sfu/whatsupgold-sd ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] bscan troubles
Hello ! We had some database troubles and decided to recreate the catalog with bscan. It worked nicely with our disk-volumes. It took a while and created an impressive 15GB MySQL-tmpfile for each of the big 1.5TB volumes - but it worked without problems. It also flawlessly read 2.5TB of incremental Backups (in 70 separate volumes) without a hitch. But now i´m starting to scan our tape volumes and i´m running into a strange problem. I reproduced this with 3 different tapes on a dedicated LTO-5 drive and on both internal drives of our Tape Library. snip bscan -V 04L5 -v -m -s -c /etc/bacula/bacula-sd.conf TL-LTO5-2 [... lots of good output here ...] bscan: bscan.c:1246 Created JobMedia record JobId 7132, MediaId 135 bscan: bscan.c:1016 Created Client record for Client: feywa.test.riege.de-fd bscan: bscan.c:1099 Created new JobId=7133 record for original JobId=237013 bscan: bscan.c:683 98,304 file records. At file:blk=18:2,532 bytes=6,406,109,041 bscan: bscan.c:1033 Fileset FullSet already exists. bscan: bscan.c:1154 Updated Job termination record for JobId=7133 Level=Incremental TermStat=T bscan: bscan.c:1246 Created JobMedia record JobId 7133, MediaId 135 bscan: bscan.c:1016 Created Client record for Client: cm.dev.riege.de-fd bscan: bscan.c:1099 Created new JobId=7134 record for original JobId=237007 bscan: bscan.c:1033 Fileset FullSet already exists. bscan: bscan.c:1154 Updated Job termination record for JobId=7134 Level=Incremental TermStat=� bscan: bscan.c:1246 Created JobMedia record JobId 7134, MediaId 135 bscan: bscan.c:1033 Fileset FullSet already exists. bscan: bscan.c:1154 Updated Job termination record for JobId=7134 Level=Incremental TermStat=T Segmentation fault snip here a different tape on the single LTO-5 drive: snip time bscan -V 06L5 -v -m -s -c /etc/bacula/bacula-sd.conf nst0-sd [... lots of good output here ...] bscan: bscan.c:1246 Created JobMedia record JobId 7114, MediaId 140 bscan: bscan.c:1016 Created Client record for Client: ee.test.riege.de-fd bscan: bscan.c:1099 Created new JobId=7115 record for original JobId=227789 bscan: bscan.c:1033 Fileset FullSet already exists. bscan: bscan.c:1154 Updated Job termination record for JobId=7115 Level=Incremental TermStat=T bscan: bscan.c:1246 Created JobMedia record JobId 7115, MediaId 140 bscan: bscan.c:1016 Created Client record for Client: feywa.test.riege.de-fd bscan: bscan.c:1099 Created new JobId=7116 record for original JobId=227790 bscan: bscan.c:1033 Fileset FullSet already exists. bscan: bscan.c:1154 Updated Job termination record for JobId=7116 Level=Incremental TermStat=� bscan: bscan.c:1246 Created JobMedia record JobId 7116, MediaId 140 bscan: bscan.c:1033 Fileset FullSet already exists. bscan: bscan.c:1154 Updated Job termination record for JobId=7116 Level=Incremental TermStat=T Segmentation fault snip Debug output makes no difference at this point. It just segfaults, quite possibly because of the � Any idea where this might be coming from or what i can do ? Best regards, Daniel Holtkamp -- . Riege Software International GmbH Fon: +49 (2159) 9148 0 Mollsfeld 10 Fax: +49 (2159) 9148 11 40670 MeerbuschWeb: www.riege.com GermanyE-Mail: holtk...@riege.com ------ Handelsregister: Managing Directors: Amtsgericht Neuss HRB-NR 4207 Christian Riege USt-ID-Nr.: DE120585842Gabriele Riege Johannes Riege . YOU CARE FOR FREIGHT, WE CARE FOR YOU -- Benefiting from Server Virtualization: Beyond Initial Workload Consolidation -- Increasing the use of server virtualization is a top priority.Virtualization can reduce costs, simplify management, and improve application availability and disaster protection. Learn more about boosting the value of server virtualization. http://p.sf.net/sfu/vmware-sfdev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Maximum Concurrent Jobs in job definition
Hi ! On 3/11/10 3:40 AM, Norberto Meijome wrote: But it has no effect . I get 2 jobs running in parallel (for a short while, until the pre-script kills it). If I change the director's Max Concurrent Jobs to 1, then it's forced to 1 (but i need more than one, as I as have spooling enabled and other jobs writing to the tape too..) What is going on ? Besides the hint about duplicate job control that might or might not work depending on your configuration i have another one. I assume you those jobs all run on the same Client. Just specify maximum concurrent jobs = 1 in the client-resource (bacula-dir.conf) for that client and it will never run more than one job simultaneously. Be sure that you don´t do this in the bacula-fd config because you can´t check the FDs status anymore when a backup job is running (backup + fd-status check = 2 jobs). Best regards, Daniel Holtkamp -- . Riege Software International GmbH Fon: +49 (2159) 9148 0 Mollsfeld 10 Fax: +49 (2159) 9148 11 40670 MeerbuschWeb: www.riege.com GermanyE-Mail: holtk...@riege.com ------ Handelsregister: Managing Directors: Amtsgericht Neuss HRB-NR 4207 Christian Riege USt-ID-Nr.: DE120585842Gabriele Riege Johannes Riege . YOU CARE FOR FREIGHT, WE CARE FOR YOU -- Download Intel#174; Parallel Studio Eval Try the new software tools for yourself. Speed compiling, find bugs proactively, and fine-tune applications for parallel performance. See why Intel Parallel Studio got high marks during beta. http://p.sf.net/sfu/intel-sw-dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Multiple SD's
Hello ! On 1/5/10 6:40 PM, Phil Stracchino wrote: Brian Debelius wrote: I want to see if having disk storage on one sd process, and tape storage on another sd process, would increase throughput during copy jobs. Actually, it'll decrease it rather drastically. All the way to none. Good laugh there :) You see, at the present time you cannot copy or migrate from one SD to another. Copy and migration operations can only occur between devices attached to a single SD, because SDs cannot yet communicate directly with one another, which they would need to do to perform inter-SD copies or migrations. My company has requested this feature (copy jobs between multiple SDs) and is willing to pay half of what Bacula Systems wants for implementing. They asked for 10k€ and we are willing to pay 5k€. Our main reason to request this feature is that we can have a central director in our office, a SD in our office and a SD in the datacenter. We could then do a (local) backup in the datacenter and copy those jobs to our office-sd during off-hours. And from there they get copied to tape for achival. It would be great if we could find more people willing to commit money to this feature. On the other hand if any devs feel up to the task and the 5k€ we offer is enough that would be great too. Best regards, Daniel Holtkamp -- . Riege Software International GmbH Fon: +49 (2159) 9148 0 Mollsfeld 10 Fax: +49 (2159) 9148 11 40670 MeerbuschWeb: www.riege.com GermanyE-Mail: holtk...@riege.com ------ Handelsregister: Managing Directors: Amtsgericht Neuss HRB-NR 4207 Christian Riege USt-ID-Nr.: DE120585842Gabriele Riege Johannes Riege . YOU CARE FOR FREIGHT, WE CARE FOR YOU -- This SF.Net email is sponsored by the Verizon Developer Community Take advantage of Verizon's best-in-class app development support A streamlined, 14 day to market process makes app distribution fast and easy Join now and get one step closer to millions of Verizon customers http://p.sf.net/sfu/verizon-dev2dev ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] MySQL: Batch-Inserts Disk-based tmp-tables
Hello everyone ! Please correct me if i'm wrong, but i did notice that all temporary batch-insert tables created by bacula are disk-based. After digging a bit on why this happens (starting with the mysql-parameters) i found the following bit that explained it quite clearly. From http://dev.mysql.com/doc/refman/5.0/en/memory-storage-engine.html - MEMORY tables cannot contain BLOB or TEXT columns. And here is the Table-Creation in the bacula-source (src/cats/sql_create.c): CREATE TEMPORARY TABLE batch ( FileIndex integer, JobId integer, Path blob, Name blob, LStat tinyblob, MD5 tinyblob),NULL, NULL); Of course - so bacula batch-insert tables are never going to be memory tables because of the blob columns. If those tables have to be blobs there is nothing we can do about it - but do they really have to be ? Does batch-inserts still make it faster even though the tables are disk-based ? (I did not test that). I also found this in patches/testing/batch-insert.readme and am curious if it is still valid: --- you MUST change some indexes. mysql) ALTER TABLE Filename DROP INDEX Name; ALTER TABLE Filename ADD UNIQUE (Name(255)); ALTER TABLE Path DROP INDEX Path; ALTER TABLE Path ADD UNIQUE (Path(255)); --- But mysql_create_tables.in (again in src/cats/) says: --- CREATE TABLE Filename ( FilenameId INTEGER UNSIGNED NOT NULL AUTO_INCREMENT, Name BLOB NOT NULL, PRIMARY KEY(FilenameId), INDEX (Name(255)) ); CREATE TABLE Path ( PathId INTEGER UNSIGNED NOT NULL AUTO_INCREMENT, Path BLOB NOT NULL, PRIMARY KEY(PathId), INDEX (Path(255)) ); --- I`m pretty sure that the bacula-rpm (that has batch-insert enabled) does not create the database in the correct way for batch-inserts if those indexes are still necessary. I`m also having a Problem with my Director hanging sometime in the night. It just stops doing anything and you cannot connect to the console. I don't think i can get a Traceback from this because the director does not actually crash. It just sits there doing nothing. I am still analysing this though - if you have any tips on how i can get some useful output (i did set the debug-level for SD Dir to 200 today and hope to see something tomorrow) please tell. Best regards Daniel Holtkamp -- . Riege Software International GmbH Fon: +49 (2159) 9148 0 Mollsfeld 10 Fax: +49 (2159) 9148 11 40670 MeerbuschWeb: www.riege.com GermanyE-Mail: holtk...@riege.com ------ Handelsregister: Managing Directors: Amtsgericht Neuss HRB-NR 4207 Christian Riege USt-ID-Nr.: DE120585842Gabriele Riege Johannes Riege . YOU CARE FOR FREIGHT, WE CARE FOR YOU -- ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Severe Performance Issues with high volume of files
attributes again ? The data is already in the database but linked to the original backup job. After the migration has run the on disk-data cannot be accessed anymore, so why keep it ? Or even better, why not just UPDATE it so it links to the migration job ? This should go a LOT quicker than doing a complete insert again and would remove this bottleneck completely. I'm afraid i'm not a programmer or i would take a look into this myself. I actually did look at the sources but it could be encrypted and look all the same to me :) If you need any more information on this i will try to get it. Just let me know. Best regards, Daniel Holtkamp -- . Riege Software International GmbH Fon: +49 (2159) 9148 0 Mollsfeld 10 Fax: +49 (2159) 9148 11 40670 MeerbuschWeb: www.riege.com GermanyE-Mail: holtk...@riege.com ------ Handelsregister: Managing Directors: Amtsgericht Neuss HRB-NR 4207 Christian Riege USt-ID-Nr.: DE120585842Gabriele Riege Johannes Riege . YOU CARE FOR FREIGHT, WE CARE FOR YOU -- ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Finding performance issues
Hi ! (private) HKS wrote: It seems more and more likely to me that this is a Bacula-specific issue. What else can I dig into to try to resolve this? Can you check how many queries per second you get on the database while backing up ? Spooling makes no difference i take it ? Does attribute spooling make a difference ? (Spool Attributes = yes) If you didn`t check out attribute spooling yet it could still be a problem with the database. If it is you should see higher transfer speed during the backup. After the backup the attributes are commited to the database and THIS takes quite a while. At least that is what i can see on my system. I can see it inserting with about 250 - 300 queries per second ... never goes higher ... and for filesets with 10 million files that takes quite a while to commit ... Database, Attribute-Spool-Files, MySQL-Temp Files and Backup-Files are all on different arrays ... -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 . Riege Software International GmbH Fon: +49 (2159) 9148 0 Mollsfeld 10 Fax: +49 (2159) 9148 11 40670 MeerbuschWeb: www.riege.com GermanyE-Mail: holtk...@riege.com ------ Handelsregister: Managing Directors: Amtsgericht Neuss HRB-NR 4207 Christian Riege USt-ID-Nr.: DE120585842Gabriele Riege Johannes Riege . YOU CARE FOR FREIGHT, WE CARE FOR YOU -- Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Multiple Tapedrives as one Storage
Hi ! I`m not sure if this is possible so i`m asking here. We have 4 tapedrives connected to our backupserver. Is it possible to insert a blank tape into each one, bacula then starts to write to the first tapedrive (labeling the tape in the process) and when that tape is filled it continues to write on the second drive ? And after that the third and fourth and then wait for a new tape to be inserted into drive 1 ? I would use this to migrate all disk-based volumes to one archive-pool on tapes. I got the impression that something like this would be possible with an autochanger configuration. Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Daily changed tape pool configuration ?
Hi ! We have a tape that gets changed daily and i seem to have a few problems with it. I`d like to configure the pool in a way that no matter what the currently inserted tape will be used. backup-dir Version: 1.38.4 bernoulli-fd Version: 1.38.2 Pool { Name = dailytape-pool # used monthly Pool Type= Backup Label Format = daily. Maximum Volume Jobs = 3 # 3 Clients = 3 jobs ! Volume Use Duration = 1 day Maximum Volumes = 16 Volume Retention = 11 days Recycle Current Volume= yes AutoPrune= yes # Prune expired volumes Recycle = yes # automatically recycle Volumes } This is what i tried, but it doesn`t seem to work. 05-Apr 21:05 backup-dir: Start Backup JobId 5297, Job=Bernoulli.2006-04-05_21.05.01 05-Apr 21:06 backup-dir: Pruned 3 Jobs on Volume daily.0014 from catalog. 05-Apr 21:06 backup-sd: Bernoulli.2006-04-05_21.05.01 Warning: Director wanted Volume daily.0013. Current Volume daily.0014 not acceptable because: 1998 Volume daily.0014 status is Full, but should be Append, Purged or Recycle (cannot automatically recycle current volume, as it still contains unpruned data). 05-Apr 21:06 backup-sd: Please mount Volume daily.0013 on Storage Device daily-sd (/dev/nst0) for Job Bernoulli.2006-04-05_21.05.01 05-Apr 22:05 bernoulli-fd: Bernoulli.2006-04-05_21.05.01 Fatal error: job.c:1594 Comm error with SD. bad response to Append Data. ERR=Interrupted system call After that you get the backup canceled info (canceled because max wait time is reached). You can see it prunes the 3 jobs on the volume just before the backup starts but then says there is still unpruned data on it. The job that starts 4 hours later and uses the same pool does not have any problems and uses the tape. Also Volume Use Duration does not seem to kick in ... if i list the volumes in the pool i get this: +-++---++--+--+-+--+---++-+ | MediaId | VolumeName | VolStatus | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | 157 | daily.0013 | Append| 63,072,842,832 | 64 | 950,400 | 1 |0 | 1 | daily-tape | 2006-04-05 13:09:06 | | 192 | daily.0014 | Append| 49,326,499,066 | 50 | 950,400 | 1 |0 | 1 | daily-tape | 2006-04-06 12:47:56 +-++---++--+--+-+--+---++-+ (cut out the unimportant stuff) They should have changed to status used by now. The Maximum Volume Jobs is not hit (because of the first backup failing) but the Volume use duration should have been. Any ideas ? Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Re: [Bacula-devel] Run After Job
Hello ! Thanks for getting back on this. Kern Sibbald wrote: Another more important point that has been brought up is how users can guarantee that their Run After Job script is unconditionally run so they can restart their database after shutting it down in the Run Before Job script. The answer is: the Run After Job is run only when the job terminates normally, but you may also define a Run After Failed Job that will be run if the job terminates with any error. If both the directives are specified and they specify the same script, your script will then be unconditionally called. If you wish to know the exit status, you can pass it as one of the edit codes on the command line. [EMAIL PROTECTED] bin]# service bacula-dir start Starting Bacula Director services: 03-Mar 15:48 bacula-dir: ERROR TERMINATION at parse_conf.c:834 Config error: Keyword ClientRunAfterFailedJob not permitted in this resource. Perhaps you left the trailing brace off of the previous resource. : line 23, col 34 of file /var/backup/bacula/bin/clients/bernoulli.conf Client Run After Failed Job = /root/bin/oraup [FAILED] Seems it`s not inmplemented for clients yet ? Or do i have to go for the latest release ? Also the documentation is missing this. Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Why is this job regarded as canceled ?
Hi ! --- SNIP -- 28-Feb 21:05 backup-dir: Prior failed job found. Upgrading to Full. 28-Feb 21:05 backup-dir: RunBefore: Connecting to Director backup:9101 28-Feb 21:05 backup-dir: RunBefore: 1000 OK: backup-dir Version: 1.38.4 (14 January 2006) 28-Feb 21:05 backup-dir: RunBefore: Enter a period to cancel a command. 28-Feb 21:05 backup-dir: RunBefore: mount storage=leibniz-storage 28-Feb 21:05 backup-dir: RunBefore: Using default Catalog name=MyCatalog DB=bacula 28-Feb 21:05 backup-dir: RunBefore: 3001 Device leibniz-sd (/dev/nst3) is mounted with Volume leibniz.full.0003 28-Feb 21:05 backup-dir: RunBefore: You have messages. 28-Feb 21:05 backup-dir: RunBefore: quit 28-Feb 21:05 backup-dir: Start Backup JobId 4069, Job=Leibniz.2006-02-28_21.05.03 28-Feb 21:05 backup-sd: Recycled volume leibniz.full.0003 on device leibniz-sd (/dev/nst3), all previous data lost. 28-Feb 21:05 backup-sd: Spooling data ... leibniz-fd: Filesystem change prohibited. Will not descend into /dev leibniz-fd: Filesystem change prohibited. Will not descend into /export leibniz-fd: Filesystem change prohibited. Will not descend into /home leibniz-fd: Filesystem change prohibited. Will not descend into /var leibniz-fd: Filesystem change prohibited. Will not descend into /usr leibniz-fd: Filesystem change prohibited. Will not descend into /sys leibniz-fd: Filesystem change prohibited. Will not descend into /var/lib/nfs/rpc_pipefs 01-Mar 07:27 backup-sd: Committing spooled data to Volume leibniz.full.0003. Despooling 74,622,400,511 bytes ... 01-Mar 08:57 backup-dir: Max Volume jobs exceeded. Marking Volume leibniz.full.0003 as Used. 01-Mar 08:57 backup-sd: Alert: mtx: cannot open SCSI device '*None*' - No such file or directory 01-Mar 08:57 backup-sd: Sending spooled attrs to the Director. Despooling 338,831,806 bytes ... 01-Mar 09:31 backup-dir: Bacula 1.38.4 (14Jan06): 01-Mar-2006 09:31:41 JobId: 4069 Job:Leibniz.2006-02-28_21.05.03 Backup Level: Full (upgraded from Incremental) Client: leibniz-fd i686-redhat-linux-gnu,redhat,Enterprise release FileSet:Leibniz 2005-10-19 20:05:02 Pool: leibniz-full-pool Storage:leibniz-storage Scheduled time: 28-Feb-2006 21:05:02 Start time: 28-Feb-2006 21:05:04 End time: 01-Mar-2006 09:31:41 Priority: 10 FD Files Written: 1,107,563 SD Files Written: 1,107,563 FD Bytes Written: 74,304,949,609 SD Bytes Written: 74,481,407,723 Rate: 1658.7 KB/s Software Compression: 37.3 % Volume name(s): leibniz.full.0003 Volume Session Id: 5 Volume Session Time:1141142006 Last Volume Bytes: 74,608,522,428 Non-fatal FD errors:0 SD Errors: 0 FD termination status: OK SD termination status: OK Termination:Backup Canceled --- SNIP -- Why is this job reported as canceled ? I can see no reason as it spooled fine and put everything on tape ? Best Regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.Net email is sponsored by xPML, a groundbreaking scripting language that extends applications into web and mobile media. Attend the live webcast and join the prime developer group breaking into this new coding territory! http://sel.as-us.falkag.net/sel?cmd=lnkkid=110944bid=241720dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Re: The table 'File' is full
Hi ! Roger wrote: What will happend to the MyISAM file, will it be converted, or just left behind an I need to start my backups from scratch? I think the MyISAM files got converted and deleted. Actually i`m pretty sure about that :) Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] The table 'File' is full
Hi ! Roger Kvam wrote: My MySQL database is 6.8G, while the File.MYD is 4.0G You ran into a mysql-limit there. The File Table apparently uses MyISAM as storage engine and the max-limit there is 4 GB. Fire up mysql-administrator and change the storage engine to InnoDB then you`re fine. (On my system i changed all tables to InnoDB - just in case). Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Run After Job command
Hi ! Is the Run After Job command executed if the job failed ? It appears not to do so and the documentation didn`t help. Or is there a way to get it executed even if the job failed ? For example one backup job backups our oracle-server. I stop the oracle with the Run Before Job command, but when the backup fails because no tape is inserted the oracle is not started again. Which is bad :) Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] .src.rpm, build client only?
Ryan Novosielski wrote: Is there a way to only build the bacula-sd rpm by using rpmbuild that I'm unaware of? There are a lot of deps to, say, gconsole, which is something I don't even need. I asked that some weeks ago. From the Specfile that is not possible but i just rewrote (deleted most parts) from the specfile, adjusted the configure option to include --enable-client-only and built the package. I don`t have the Spec-files anymore tho else i could give an example. Best regards -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Contents of an Incremental Backup ?
Hi ! One of our servers does a weekly full-save (90gb) and daily incrementals ... those incrementals have grown in size over the last two weeks up to a daily size of 32GB. Is there a way to just get a file-listing of an incremental backup because i would like to investigate what caused this sudden increase in size (it was 15GB/day) ? Best regards -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://sel.as-us.falkag.net/sel?cmd=lnkkid=103432bid=230486dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Bacula client RPMs
Hi ! Is there a switch for rpmbuild that only builds the clients and only checks the dependencies for those ? I didn`t find anything checking the specfile but maybe i missed it. Would be nice if i could just specify rpmbuild --rebuild --define build_rh7 1 --define client_only 1 bacula.src.rpm because i only need to build one server but 4 diff versions of the client. I just ran into the problem that the RHAS2.1 (rh7 compatible) does not have most of the required packets ... they`re simply not available for that OS-release :( Best Regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] One storage daemon per device ?
Hi ! Florian Daniel Otel wrote: AFAIU that does not seem possible and it seems that I need to run one storage daemon per device/media type. Uh, we use one SD that controls LOTS of disk-based devices and 3 LTO Tape devices. No problems here. Here a little excerpt: -- bacula-sd.conf - ## TAPE BACKUP LOCATIONS ! Device { Name = procars-sd #Drive Index = 0 Media Type = procars-tape Archive Device = /dev/nst1 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; Spool Directory = /var/backup/bacula/spool AutoChanger = no Alert Command = sh -c '/usr/local/sbin/tapeinfo -f %c |grep TapeAlert|cat' } Device { Name = daily-sd #Drive Index = 0 Media Type = daily-tape Archive Device = /dev/nst0 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; Spool Directory = /var/backup/bacula/spool AutoChanger = no Alert Command = sh -c '/usr/local/sbin/tapeinfo -f %c |grep TapeAlert|cat' } Device { Name = leibniz-sd #Drive Index = 0 Media Type = leibniz-tape Archive Device = /dev/nst2 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; Spool Directory = /var/backup/bacula/spool AutoChanger = no Alert Command = sh -c '/usr/local/sbin/tapeinfo -f %c |grep TapeAlert|cat' } # Disk Devices Device { Name = zerberus-sd Media Type = zerberus-file Archive Device = /var/backup/bacula/storage_a/zerberus/ LabelMedia = yes; # lets Bacula label unlabeled media Random Access = Yes; AutomaticMount = yes; # when device opened, read it RemovableMedia = no; AlwaysOpen = no; } --- SNIP - Hope that helps a little bit. -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] One storage daemon per device ?
Hi ! Florian Daniel Otel wrote: So, the question is: If I specifiy all devices in a single storage daemon config file, how to I select a specific device/media type to be used in a job specification ? Easy, do it like this: bacula-dir.conf -- --- client bernoulli Job { Name = Bernoulli Client = bernoulli-fd JobDefs = DefaultJob Storage = dailytape-storage FileSet = Bernoulli Schedule = bernoulli-cycle Pool = dailytape-pool Write Bootstrap = /var/backup/bacula/working/bernoulli.bsr Client Run Before Job= /root/bin/oradown Client Run After Job = /root/bin/oraup Run Before Job = /var/backup/bacula/bin/scripts/bernoulli-start Spool Data = yes Spool Attributes = yes Max Wait Time= 3600 } --- client delphi Job { Name = Delphi Client = delphi-fd JobDefs = DefaultJob Storage = dailytape-storage FileSet = Delphi Schedule = delphi-cycle Pool = dailytape-pool Write Bootstrap = /var/backup/bacula/working/delphi.bsr Run Before Job = /var/backup/bacula/bin/scripts/vacation-check Spool Data = yes Spool Attributes = yes Max Wait Time= 3600 } daily changed tape storage for 3 clients (bernoulli, delphi and one more) Storage { Name = dailytape-storage Address= backup.riege.de SDPort = 9103 Password = baculabackup Device = daily-sd Media Type = daily-tape } Pool { Name = dailytape-pool # used monthly Pool Type= Backup Label Format = daily. Accept Any Volume= yes # use next available volume Maximum Volume Jobs = 3 # 3 Clients = 3 jobs ! #Volume Use Duration = 16 hours Maximum Volumes = 16 Volume Retention = 11 days AutoPrune= yes # Prune expired volumes Recycle = yes # automatically recycle Volumes } definitions for Procars - gets one tape for himself Job { Name = Procars Client = backup-fd JobDefs = DefaultJob Storage = procars-storage FileSet = Procars Schedule = procars-cycle Pool = procars-pool Write Bootstrap = /var/backup/bacula/working/procars.bsr Run After Job= /var/backup/bacula/bin/scripts/procars-eject Spool Data = yes Spool Attributes = yes Max Wait Time= 3600 } Storage { Name = procars-storage Address= backup.riege.de SDPort = 9103 Password = baculabackup Device = procars-sd Media Type = procars-tape } Pool { Name = procars-pool # used weekly Pool Type= Backup Label Format = procars. Accept Any Volume= yes # use next available volume Maximum Volume Jobs = 7 Maximum Volumes = 4 Volume Retention = 2 weeks# catalog entries AutoPrune= yes # Prune expired volumes Recycle = yes # automatically recycle Volumes } SNIP --- I hope you get how it`s done without further explanation as i`m not too good at explaining stuff ;) Basically each storage device in the SD-config has another Storage definition in the director that you can reference in the job-defs. Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Solaris 8 Backup problem
Hi ! Ribi Roland wrote: I disabled compression on my solaris boxes! It was very slow with gzip-compression. Thanks for all your kind responses. I`ll try to go with no compression / no signature next run and see if it makes any difference. I sure hope so :-) Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Solaris 8 Backup problem
Hi ! I`m having difficulties with our Solaris 8 server. I`d like to present you the output i had today: 30-Nov 20:05 backup-dir: No prior Full backup Job record found. 30-Nov 20:05 backup-dir: No prior or suitable Full backup found. Doing FULL backup. 30-Nov 20:05 backup-dir: Start Backup JobId 1185, Job=x400mta.2005-11-30_20.05.00 30-Nov 20:05 backup-sd: Volume x400mta.0011 previously written, moving to end of data. 01-Dec 09:25 backup-sd: x400mta.2005-11-30_20.05.00 Fatal error: append.c:133 Error reading data header from FD. ERR=No data available 01-Dec 09:25 backup-dir: Max Volume jobs exceeded. Marking Volume x400mta.0011 as Used. 01-Dec 09:25 backup-dir: Bacula 1.37.40 (01Oct05): 01-Dec-2005 09:25:34 JobId: 1185 Job:x400mta.2005-11-30_20.05.00 Backup Level: Full (upgraded from Incremental) Client: x400mta-fd sparc-sun-solaris2.8,solaris,5.8 FileSet:x400mta 2005-11-09 23:05:04 Pool: x400mta-pool Storage:x400mta-storage Scheduled time: 30-Nov-2005 20:05:00 Start time: 30-Nov-2005 20:05:03 End time: 01-Dec-2005 09:25:34 Priority: 10 FD Files Written: 2,238,317 SD Files Written: 2,238,317 FD Bytes Written: 2,564,784,565 SD Bytes Written: 2,928,361,557 Rate: 53.4 KB/s Software Compression: 67.4 % Volume name(s): x400mta.0011 Volume Session Id: 1 Volume Session Time:1133350797 Last Volume Bytes: 4,012,061,578 Non-fatal FD errors:0 SD Errors: 0 FD termination status: Canceled SD termination status: Canceled Termination:Backup Canceled I canceled the backup at 9:25 so that`s not the problem. The problem is - the backup started at 20:05 yesterday and this morning at 9:25 it was about halfway done (if that) ... we got about 5 mil files on that machine thats why i know. The backup is *REALLY* slow for this machine and none of the other servers is having similar problems. This is our only Solaris machine though. I`m also still using the 1.37.40 release because i`m waiting on the official RPMs to upgrade. The backup also heavily affects the performance of the application running on that box. I set compression to GZIP1 so this shouldn`t be the problem (cpu-load is fine actually). I have no idea what`s causing this, any ideas what i could check ? Amanda never had these kinda problems so i figure it is a bacula problem. Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] MySQL Maximum Size AND Auto Pruning..
Hi ! Beren Gamble wrote: I've reached the upper limit of my File table. I'm getting this error: 'File' is full. How do I go about fixing this? Ran into this about 2 weeks ago ... your MySQL is possibly usind MyISAM as the database storage engine. Change it to InnoDB and you should be fine ... MyISAM has a storage limit of 4 GB per database file i think. Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.net email is sponsored by: Splunk Inc. Do you grep through log files for problems? Stop! Download the new AJAX search engine that makes searching your log files as easy as surfing the web. DOWNLOAD SPLUNK! http://ads.osdn.com/?ad_id=7637alloc_id=16865op=click ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] concurrent backups to disk still hangs in 1.38.1
Hi ! Luke Dean wrote: Last month I reported a problem where my system would hang whenever I ran multiple concurrent jobs that backup to a single RAID array after upgrading from bacula 1.36.2 to 1.36.3. This problem still persists in 1.38.1. I`m still using 1.37.40 but since you seem to have the problem in 1.36.2 and 1.38.1 i don`t think that matters ... I have about 10 clients that all do a backup at 1:05. Each client has his own job, his own pool and his own storage device. I don`t know if by four storage daemons you mean 4x bacula-sd but i`m only running each service once. Max concurrent jobs is set to 10 of course. All these backups go to a 350GB Raid-5 array and the directory structure is like this: ./storage/clientA/clientA.0001 ./storage/clientB/clientB.0001 etc I`m having absolutely NO problems whatsoever with all jobs concurrently writing to the raid device. Maybe the problem is somewhere else ? -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.Net email is sponsored by the JBoss Inc. Get Certified Today Register for a JBoss Training Course. Free Certification Exam for All Training Attendees Through End of 2005. For more info visit: http://ads.osdn.com/?ad_id=7628alloc_id=16845op=click ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] DB Problems ?
Arno Lehmann wrote: 13-Nov 04:23 backup-dir: Procars.2005-11-12_19.41.43 Fatal error: sql_create.c:734 Create db File record INSERT INTO File (FileIndex,JobId,PathId,FilenameId,LStat,MD5) VALUES (1353546,678,49864,1041923,'DkB Bto/k IGw B JY JY A Ga BAA I BDdiPY BC25yY BDSPqH A A E','GUc1A4+aoRdfGC/Tv0hHF6+eM+M') failed. ERR=The table 'File' is full The table 'File' is full Which database? MySQL ... dang, should`ve noted that ... If it's MySQL, you have the option to tune the database settings. Easily done with the graphical administration program, where you can select the table you want to modify, set the expected row length and, important in this case, you can also define the maximum number of rows in the table. Allright, that points me in the right direction, i`ll take a look Ifyou've found a *real* limit, in this case you stored a number of files beyond what your DBMS can hold per table, you're in trouble... but that seems unlikely. Of course, you might have a full file system, too. File System was ok (that was one of the first problems i ran into testing bacula - now the DB got 80gig - should be enuff ;) ) I also don`t hope i found a limit ... does Bacula work with one of my cute Oracle10g DBs ? :-) I`ll write a report when i know more Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] DB Problems ?
Hello ! Daniel Holtkamp wrote: 13-Nov 04:23 backup-dir: Procars.2005-11-12_19.41.43 Fatal error: sql_create.c:734 Create db File record INSERT INTO File (FileIndex,JobId,PathId,FilenameId,LStat,MD5) VALUES (1353546,678,49864,1041923,'DkB Bto/k IGw B JY JY A Ga BAA I BDdiPY BC25yY BDSPqH A A E','GUc1A4+aoRdfGC/Tv0hHF6+eM+M') failed. ERR=The table 'File' is full The table 'File' is full MySQL ... dang, should`ve noted that ... If it's MySQL, you have the option to tune the database settings. Easily done with the graphical administration program, where you can select the table you want to modify, set the expected row length and, important in this case, you can also define the maximum number of rows in the table. Allright, i took a look at the Database. Spotting the error was actually pretty easy. The File table has the following details: Rows: 35884993 Avg. row length: 115 Data length: 4294967276 Max data length: 4294967295 Index length: 1002577920 Data free: 142099940 I`ve reached the maximum Data length it seems ... mysql was unable to extend the datafile - table full. The Mysql i installed uses the MyISAM Storage Engine ... and i think the filesize-limit for those is 4GB I`m gonna change the database to the InnoDB Storage Engine ... what do you think, should i try to convert the old database into the new format or should i just scrap the db completely and make it new ... this time the right way. I think i ran into this problem so quickly because we have countless numbers of small files to backup. And it startet appearing after i put our Solaris machine into the backup which alone has like 5 million files. Is something like this mentioned in the documentation btw ? I figure other users could run into this problem. -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] DB Problems ?
Hi ! Kern Sibbald wrote: Data length: 4294967276 Yes, 40+GB is really big. I consider anything over 1GB big. Actually that is 4GB :-) Is something like this mentioned in the documentation btw ? I figure other users could run into this problem. The problem of running into table or database size limits is not discussed in the manual, but there is a bit of information on sizing your DB in the chapter(s) dealing with MySQL. Yeh, we have other MySQL-DBs here on site that are well past the 10GB mark and no problems ... it just happened to me because i`m a Oracle-DBA and MySQL is still a big mystery to me :-) (Oracle is so easy compared to MySQL ;) ) Guess i won`t be running any backups tonight ... running a DB-Backup for safety and then i`m going to convert. One crucial question i always forget to ask ... Some of our backups get spooled first, on these i noticed that that bacula commits all the db-changes at once ... now what happens when a (non-spooling) backup is running and the table fills like it happened on the weekend ? Is the backup partially commited ? Or is a final commit to the database only done after the backup finished successfully ? I`m fearing loose ends in my DB ... Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Use 'mount' to release jobs
Gabriele Bulfon wrote: 02-Nov 23:01 iserver-dir: Start Backup JobId 355, Job=Enterprise_Backup.2005-11-02_23.00.00 02-Nov 23:01 iserver-dir: Pruned 1 Job on Volume WEDNESDAY from catalog. 02-Nov 23:01 iserver-sd: Job Enterprise_Backup.2005-11-02_23.00.00 waiting. Cannot find any appendable volumes. Well, the job is purged at the time the backup starts but the volume isnt recycled yet - so it`s not available. 03-Nov 00:01 iserver-dir: There are no Jobs associated with Volume WEDNESDAY. Marking it purged. 03-Nov 00:01 iserver-dir: Recycled volume WEDNESDAY Here we see the recycling ... after that the tape is usable for the backup but it does not try to mount it itself. Issuing a mount command starts the whole process. Maybe you should configure your retention-time a little different (- earlier). Cheers ! -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Oracle backups using RMAN
Hi ! Yu Safin wrote: One of my departments is using Oracle and via RMAN they backup to Netbackup. How can I accomplish the same using Bacula instead of RMAN? Is anybody backing up Oracle using Bacula? I`m administrating two Oracle 10g Servers and back them up with bacula. One is a development-server - with the ClientRunBeforeJob directive I shutdown the oracle-db (service oradb stop), then backup the whole system (closed-database backup basically) and start the oracle again with the ClientRunAfterJob directive. (This would be without RMAN) Of course this can only be done if you can afford that the database goes down during the backup which is not always the case. This is why we have another Oracle-Server (development-system with live-data) that gets backed up online. I`ve configured a standard oracle-online-backup with the Enterprise Manager (Saturday Fullbackup + Inc Sun-Fri - everything handled by RMAN). This backup goes to a seperate partition on the oracle-server. Now bacula backs-up the system, the oracle itself and the backup-area. I hope that helped you a bit. Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Bare Metal Recovery Set-Up questions
Hi ! I`m testing out baculas baremetal recovery capabilities. Now i read the documentation and now i`m a little frightened by what i just read ... I`m getting the impression that i have to compile bacula on the system i want to restore which is quite a problem for us. We have 4 compile-systems - one for each OS release (RH9, RHEL2.1, RHEL3, RHEL4) which we use to compile the packages for all of our other systems. None of the other systems is able to compile anything as there are no development tools installed. Any experiences with this ? Setting up a rescue cd for a system that is unable to compile ? I`m trying to build the files by hand as i get the impression that i only need the /roottree/bacula-HOSTNAME files for the clients that cannot compile (the CD itself will be build on a compile-system with the according OS of course). The question is - can i create this directory by hand ? (== other means than make all) Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Bacula Tape Handling questions
Hi ! Firstoff: My company is still willing to support a developer that implements data migration into bacula. I have a few questions considering tape handling. Let`s say i have a Tape that gets changed every day. Three servers backup to it (spooling of course) and i have set Maximum Volume Jobs to 3 for that pool. Is there a way to automatically eject the tape after the last server finished spooling his data ? Maybe with the Run After Job directive ? I could do it by hand with the console but thats not what i want. What happens if one backup fails and i remove the tape so that maximum volume jobs is not fulfilled ... will it ask for the old tape on the next backup or will it happily use the new tape that has been inserted ? The relabel command only works on tapes already in the catalogue ... i re-initialized my database a few times and it rejected relabeling the old tapes. It also rejected USING the old tapes ... had to do mt weof to fix that. Do i need to set the Drive Index option in bacula-sd.conf when i don`t have a tapechanger ? I only have 4 standalone LTO-1 drives but no changer. Best regards -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- This SF.Net email is sponsored by: Power Architecture Resource Center: Free content, downloads, discussions, and more. http://solutions.newsforge.com/ibmarch.tmpl ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Trouble building RPMS for 1.37.38
Hi ! Kern Sibbald wrote: The spec files have not yet been updated from version 1.36.3, so until some work is done on them, they are not likely to work -- many things in the source have changed. Ouch, can anyone help quickly ? I was about to roll out the packages to our servers. Can anyone supply client-packages for bacula 1.37.38 ? I need RHEL2.1, RHEL3, RHEL4 and RH9. As i said the packages compiled without major problems after some tweaking but you are sure they are broken right ? Had some test-systems run backups over the weekend and the director crashed twice already ... Personally i have no idea about creating spec-files so i`m pretty lost out here ;) Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Trouble building RPMS for 1.37.38
Kern Sibbald wrote: You might ask Scott Barninger who is our packager. I will, thank you :-) If you are experiencing crashes with the Director, please file a bug report. Given this situation, instead of asking Scott to rush creating the new .spec files, I think you would be much better off using the currently released version 1.36.3, which is already packaged for several of the distributions you want to use. I could use the 1.36.3 packages - but i would have to check 1.36.3 first if the functionality (like VSS for our win2k3 hosts) stays the same. Afaik VSS only got implemented with 1.37. I highly doubt it is possible to use a 1.37.38 director with 1.36.3 clients right ? Besides that i found the cause of the director-crash ... the mysql-database filles up the /var partition ... so no worries in that direction. Best regards -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Trouble building RPMS for 1.37.38
Richard Ryder wrote: 1: rhel3 is not included in the test for platform definition in the spec file. I added it and got on to the next problem rhel3 rhel4 are in the spec file you just need to look closely ;) -- bacula.spec -- # RedHat Enterprise builds %define rhel3 0 %{?build_rhel3:%define rhel3 1} %{?build_rhel3:%define wb3 1} %define rhel4 0 %{?build_rhel4:%define rhel4 1} %{?build_rhel4:%define fc3 1} -- bacula.spec -- rpmbuild -ba --define build_rhel3 1 --define build_mysql 1 bacula.spec is what i did (i compiled my first rpm yesterday so the memory is pretty fresh ;) ) 2: Spec file wants a Release_Notes-1.37.38-1.tar.gz file. I couldn't find that, so I just tar'd up the Release Notes file into a file with that name and put in the right spot for rpm to find it. That worked and I was able to get a little further. Exactly what i did :-) 3: The patches for the bundled sqlite scripts fail patching file src/cats/make_catalog_backup.in Hunk #3 FAILED at 20. Hunk #4 succeeded at 30 (offset 4 lines). 1 out of 4 hunks FAILED -- saving rejects to file src/cats/make_catalog_backup.in.rej error: Bad exit status from /var/tmp/rpm-tmp.61710 (%build) Yup, i had the same problem But i`m also only building packages for client-systems so i removed the patches from the spec file. I think you can safely ommit those patches if you are not running SQLLite. If you are using MySQL or PGSQL for your database the only thing that would need changing post-install is the make_catalog_backup file - you have to adjust the path to the mysql/pgsql executable ... For more clarity go to /usr/src/redhat/BUILD/bacula-1.37.38/src/cats/ and look at the rejected-file and the patch file, it`s just a minor change that produces the error (patch file pointing to wrong line i think) After that i was only having some trouble with the tray-monitor which i also don`t need so i removed the --with-tray-monitor option from the configure in the specfile. Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is sponsored by: Tame your development challenges with Apache's Geronimo App Server. Download it for free - -and be entered to win a 42 plasma tv or your very own Sony(tm)PSP. Click here to play: http://sourceforge.net/geronimo.php ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] strange file permissions on restore
Aleksandar Milivojevic wrote: Hmmm... Is there a way to tell Bacula to simply restore using numeric UIDs and GIDs for files, and set permissions to their original, ignoring whatever /etc/passwd and group files are currently on the system? I hope that is the default behaviour because we use a centralized ldap-directory for authentication. Restoring with right permissions and the numeric UID/GID is just fine. One more question. After restore, Bacula sent out *very* lenghty email listing all files restored. Not the best idea on full restore of the system (200,000+ files). It was one huge email. Is it possible to instruct it to be a bit less verbose (like giving just a short summary)? Uh, suddenly i`m thinking about one of our backup jobs ... FD Files Written: 1,850,386 SD Files Written: 1,850,386 FD Bytes Written: 21,065,449,310 SD Bytes Written: 21,356,605,541 Rate: 1064.0 KB/s Software Compression: 78.2 % And that`s not even a complete system ;) Also with this job the database jumped from 10mb to 260mb ... with only 3 clients beein backed up ... (final number: 32 systems backing up) I`m getting the impression that the database is going to be HUGE -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] strange file permissions on restore
Juan Luis Frances wrote: Also with this job the database jumped from 10mb to 260mb ... with only 3 clients beein backed up ... (final number: 32 systems backing up) I`m getting the impression that the database is going to be HUGE Oh, usually we're talking about GB here :-) More seriously - I've got under ten clients and have a database of 1.5GB altogether. I've read of databases much larger. Here, 25GB with indexes. Yikes ! I better put the database on another device quick ... dang, there goes the partition setup ;) Thanks for the warning that would`ve caught me by surprise. -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] backup-sd log question
Hello ! 07-Sep 10:58 backup-sd: Committing spooled data to Volume. Despooling 2,277,939,503 bytes ... 07-Sep 11:01 backup-sd: Alert: mtx: cannot open SCSI device '*None*' - No such file or directory 07-Sep 11:01 backup-sd: Sending spooled attrs to the Director. Despooling 9,194,993 bytes ... Uh, why does it try anything with mtx ? --- bacula-sd.conf excerpt --- Device { Name = backup-storage Drive Index = 0 Media Type = backup-tape Archive Device = /dev/nst1 AutomaticMount = yes; # when device opened, read it AlwaysOpen = yes; RemovableMedia = yes; RandomAccess = no; Spool Directory = /var/backup/bacula/spool AutoChanger = no Alert Command = sh -c '/usr/local/sbin/tapeinfo -f %c |grep TapeAlert|cat' } -- We don`t have a tape changer just 4x LTO-1 drives attached ... Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Combined Tape Disk Storage Solution
Hello ! I already contacted Kern about this and he suggested that i ask the lists about this. We want to backup all our clients to disk and then mirror these backups to tape. We want the ability to do quick restores from the disk (last 2-4 weeks depending on backup size) but also create a tape archive spanning several months if we need anything that is not on the disk-storage anymore (because the volume got recycled). At the moment this is not implemented. If anyone knows a workaround i`m open for suggestions. Are there any developers out there that would like to implement this? Is someone else even interested in this feature ? Would you support the development of this feature ? My company would like to support the development of this feature financially if there is a programmer that is willing to do it. So what are your thoughts ? Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] crashed client further backups ?
Hi ! I`m playing with the bacula-configuration here (1.37.36) and i noticed the following behaviour. I started a backup-job to backup our Windows 2003 Server ... everything ran fine till the windows-box crashed (still investigating why but this is something else i think - not bacula related). Now the director says the job is still running. Meanwhile i have added another backup-job to the queue that is awaiting the end of the first job. Now even if i cancel the windows-backup-job and the director says it is properly canceled it still won`t go away ... from the documentation i got the idea that it should continue after a few minutes but now i waited an hour an nothing happened. (logfiles at bottom) Restarting the director solved the problem, alltough i had to start the second job again. My concern is that when our bacula setup goes live and during the nightly backup-run ONE client crashes during the backup and the complete backup hangs ? Is there some sort of timeout that notices the client isn`t sending data anymore ? Is there a way to continue the backup from where it crashed (i doubt this functionality exists) ? If i had a Full-Backup pool for the crashed machine with a volume retention time of 2 months and 2 volumes maximum - what would happen if: sunday fullbackup crashes - volume marked as used monday - incremental gets upgraded to full - volume marked as used tue-sat - incrementals as usual sunday fullbackup - retention time for both used volumes are not over so what happens ? -- Logfiles --- Running Jobs: JobId Level Name Status == 10 FullNoether.2005-08-31_08.52.29 is running *cancel 10 Automatically selected Job: JobId=10 Job=Noether.2005-08-31_08.52.29 Confirm cancel (yes/no): yes 2901 Job Noether.2005-08-31_08.52.29 not found. 3000 Job Noether.2005-08-31_08.52.29 marked to be canceled. You have messages. *messages 31-Aug 09:49 backup-sd: Noether.2005-08-31_08.52.29 Fatal error: append.c:238 Network error on data channel. ERR=Connection reset by peer 31-Aug 09:49 backup-dir: Max Volume jobs exceeded. Marking Volume noether.full.0001 as Used. Running Jobs: JobId Level Name Status == 10 FullNoether.2005-08-31_08.52.29 has been canceled 11 Increme Backup.2005-08-31_10.00.00 is waiting execution After that i waited about an hour for the job to cancel but only restarting the director did the trick -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] crashed client further backups ?
Hello ! Thanks for the quick response ! Arno Lehmann wrote: Well, I don't know which section in the manual you refer to, but this is a network timeout problem and that's rather long in bacula - 2 hours, I think. Ouch, 2 hours is hard ... but i guess i can configure around this problem with allowing concurrent backups ... (for example one process hanging and waiting for timeout and the other is backing up fine) If i had a Full-Backup pool for the crashed machine with a volume retention time of 2 months and 2 volumes maximum - what would happen if: sunday fullbackup crashes - volume marked as used monday - incremental gets upgraded to full - volume marked as used tue-sat - incrementals as usual sunday fullbackup - retention time for both used volumes are not over so what happens ? I'm not sure I can follow your thought Indeed you couldn`t ;-) I noticed an error in my example tho, the retention time for the example should be two weeks. The question is about the volumes and their retention time. On the second sunday bacula would try to make a backup, check for available volumes in the full-pool and see two volumes (remember ? 2 volumes maximum), both in the used state (one 6 days old and ok, one 7 days old and damaged from the client-crash during the backup). At least i got the impression that a failed backup leads to a closed, used volume ... does bacula notice that this volume is incomplete and flag it for recycling immediately ignoring the retention time ? (as the data in the file is incomplete anyway). -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] include conf_file/conf_dir in bacula-dir.conf
Dmitry S. Vlasov wrote: Is there any directive in bacula-dir.conf file which can include files from any folder? ( in the apache httpd server: Include) Not exactly, i did this: /var/bacula/bin/bacula-dir.conf --- snip - # Links to client-configuration-files here @/var/bacula/bin/clients/baculacatalog.conf @/var/bacula/bin/clients/backup.conf @/var/bacula/bin/clients/galois.conf @/var/bacula/bin/clients/noether.conf --- snip - You have to include the full path if the file is not in the same directory as the bacula-dir.conf i think. -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Pools Storage location
Hi ! Trying to understand pools volumes Setup: Let`s say i only have a Default-Pool defined. Two Clients and two seperate jobs. Also two (File-)Storage locations. Each client backups to a seperate storage location BUT have the default-pool configured. Does this work ? From the configuration there seem to be no ties between the storage location and a pool. But i don`t understand what would happen because Volume001 of the Default pool cannot be on two storage locations right ? I would really appreciate some sample configuration files with multiple clients / pools / storage locations that would help me understand how everything is supposed to work. -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: holtkamp [at] riege.comFax: +49-2159-9148-11 --- SF.Net email is Sponsored by the Better Software Conference EXPO September 19-22, 2005 * San Francisco, CA * Development Lifecycle Practices Agile Plan-Driven Development * Managing Projects Teams * Testing QA Security * Process Improvement Measurement * http://www.sqe.com/bsce5sf ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Re: Bacula Multiple Tape Drives
Hi ! Now i`m on the list too, thanks for the nice explanation about the atimes tmpwatch ;) Kern Sibbald wrote: Yes, Bacula modifies atime for all files that it backs up. However, there is an option keepatime = yes, which will cause Bacula to reset the atime on files that it backs up. However, this option does not work until version 1.37.30 and later. This sounds very good - i`ve already setup the 1.37.30 (so no worries about atimes) on our server and all the initial tests look promising ... now i`m going to create a configuration for our site now ... and that means reading the documentation ... LOTS of reading :-) I suppose the /lib/tls warning is still valid ? We`re running RedHat Enterprise Linux 4 WS (Our company is very RedHat oriented). Best regards, -- Daniel HoltkampRiege Software International GmbH System Administration Mollsfeld 10 40670 Meerbusch, Germany Phone: +49-2159-9148-41 mail: [EMAIL PROTECTED] Fax: +49-2159-9148-11 --- SF.Net email is sponsored by: Discover Easy Linux Migration Strategies from IBM. Find simple to follow Roadmaps, straightforward articles, informative Webcasts and more! Get everything you need to get up to speed, fast. http://ads.osdn.com/?ad_id=7477alloc_id=16492op=click ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users