Re: [Bacula-users] FD Error On Backup
Silly question what would be an advisable / recommended heartbeat interval for the FD and DIR, respectively? With regards, Janco van der Merwe Technical Manager Dunns Stores (Pty) Ltd Switch Board: 011 541 3000 Direct: 011 541 3073 Cell: 083 291 8536 Fax: 0866308032 -Original Message- From: Dan Langille [mailto:d...@langille.org] Sent: 03 March 2009 08:06 To: Janco van der Merwe Cc: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] FD Error On Backup Janco van der Merwe wrote: Hi All, I have this error which started after hardware upgrade of our MIS system and I can't fix it. I went through the archive and a lot of people, who previously had this same problem, suggested that it might be network hardware i.e. Network cable, switch, router, NIC - related but in my case I changed the network cable from cat5 to cat6, put the 2 servers on the same Gb switch and there is no router or firewall between the two - including the normal OS firewall. I have even gone as far as downgrading the client from 2.2.8 to 2.2.5 and still the problem persists, any ideas? Look into the heartbeat options. I think you can set it for both FD and SD/dir. System Info: Server: Bacula Version: 2.2.8 OS Version: Fedora 8 Client: Bacula Version: 2.2.5 OS Version: Windows Server 2003 R2 Notification Mail: 03-Mar 02:22 brutus-dir JobId 10659: Start Backup JobId 10659, Job=MIS2005.2009-03-02_18.00.49 03-Mar 02:22 brutus-dir JobId 10659: Using Device LTO 03-Mar 02:28 mis2005-fd JobId 10659: Generate VSS snapshots. Driver=VSS Win 2003, Drive(s)=CD 03-Mar 03:17 brutus-sd JobId 10659: Job write elapsed time = 00:54:49, Transfer rate = 87.27 M bytes/second 03-Mar 04:22 brutus-dir JobId 10659: Fatal error: Network error with FD during Backup: ERR=Connection reset by peer 03-Mar 04:22 brutus-dir JobId 10659: Fatal error: No Job status returned from FD. 03-Mar 04:22 brutus-dir JobId 10659: Error: Bacula brutus-dir 2.2.8 (26Jan08): 03-Mar-2009 04:22:44 Build OS: i686-pc-linux-gnu redhat JobId: 10659 Job:MIS2005.2009-03-02_18.00.49 Backup Level: Full Client: mis2005-fd 2.2.5 (09Oct07) Linux,Cross-compile,Win32 FileSet:MIS2005 2009-02-24 12:00:00 Pool: Daily (From Job resource) Storage:PV124-T (From Job resource) Scheduled time: 02-Mar-2009 18:00:00 Start time: 03-Mar-2009 02:22:40 End time: 03-Mar-2009 04:22:44 Elapsed time: 2 hours 4 secs Priority: 10 FD Files Written: 0 SD Files Written: 25,207 FD Bytes Written: 0 (0 B) SD Bytes Written: 287,038,274,967 (287.0 GB) Rate: 0.0 KB/s Software Compression: None VSS:no Storage Encryption: no Volume name(s): 36L3 Volume Session Id: 260 Volume Session Time:1233812348 Last Volume Bytes: 808,992,156,672 (808.9 GB) Non-fatal FD errors:0 SD Errors: 0 FD termination status: Error SD termination status: OK Termination:*** Backup Error *** -- Dan Langille BSDCan - The Technical BSD Conference : http://www.bsdcan.org/ PGCon - The PostgreSQL Conference: http://www.pgcon.org/ -- Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users Please see the Dunns Stores (Pty) Ltd. Email disclaimer here: http://www.dunns.co.za/disclaimer.txt -- Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] FD Error On Backup
Isn't there a way that this can be done manually? The problem that I have on my side is that according to the director the job failed but it picks up that there was data transfer and according to the FD the job was successful, now even though the DIR recons it was a failed job the files are on the tape - now the question is how to get it off in a restore or how can I import the client status into the DIR so that I can restore those files? Strangely these errors only occur on the Dell PE 2950 with MS Windows Server 2003 x86 and x64 but not on the Linux counter part with the same hardware - which brings to mind the age old question which is better at the end Linux or Windows? In my mind there is actually no comparison, if I could I would go Linux all the way. With regards, Janco van der Merwe Technical Manager Dunns Stores (Pty) Ltd Switch Board: 011 541 3000 Direct: 011 541 3073 Cell: 083 291 8536 Fax: 0866308032 -Original Message- From: Chad Walstrom [mailto:che...@wookimus.net] Sent: 05 March 2009 18:02 To: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] FD Error On Backup Janco van der Merwe wrote: Silly question what would be an advisable / recommended heartbeat interval for the FD and DIR, respectively? We set up the heartbeat for any client-server session that exists over a firewall (which more often than not time out long-running sessions with little or no traffic) or trouble router. I would love it if the director-fd relationship could be re-established in the event of network failures. I.e., the director realizes that it's connection to the fd has failed, so it re-establishes it at a later time to find out the status of a backup job or retrieve messages. Chad -- Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users Please see the Dunns Stores (Pty) Ltd. Email disclaimer here: http://www.dunns.co.za/disclaimer.txt -- Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] FD Error On Backup
Please correct me if I'm wrong? The way that I understand it is that when you set a heartbeat interval in the director, the director will keep the connection open, for the specified time, for each client, is that correct? Now if my previous statement is correct, is it necessary to specify a heartbeat interval in the FD or doesn't matter where you specify it? With regards, Janco van der Merwe Technical Manager Dunns Stores (Pty) Ltd Switch Board: 011 541 3000 Direct: 011 541 3073 Cell: 083 291 8536 Fax: 0866308032 -Original Message- From: Dan Langille [mailto:d...@langille.org] Sent: 05 March 2009 17:38 To: Janco van der Merwe Cc: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] FD Error On Backup Janco van der Merwe wrote: Silly question what would be an advisable / recommended heartbeat interval for the FD and DIR, respectively? It's not much overhead. I'd go for 60 seconds. With regards, Janco van der Merwe Technical Manager Dunns Stores (Pty) Ltd Switch Board: 011 541 3000 Direct: 011 541 3073 Cell: 083 291 8536 Fax: 0866308032 -Original Message- From: Dan Langille [mailto:d...@langille.org] Sent: 03 March 2009 08:06 To: Janco van der Merwe Cc: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] FD Error On Backup Janco van der Merwe wrote: Hi All, I have this error which started after hardware upgrade of our MIS system and I can't fix it. I went through the archive and a lot of people, who previously had this same problem, suggested that it might be network hardware i.e. Network cable, switch, router, NIC - related but in my case I changed the network cable from cat5 to cat6, put the 2 servers on the same Gb switch and there is no router or firewall between the two - including the normal OS firewall. I have even gone as far as downgrading the client from 2.2.8 to 2.2.5 and still the problem persists, any ideas? Look into the heartbeat options. I think you can set it for both FD and SD/dir. System Info: Server: Bacula Version: 2.2.8 OS Version: Fedora 8 Client: Bacula Version: 2.2.5 OS Version: Windows Server 2003 R2 Notification Mail: 03-Mar 02:22 brutus-dir JobId 10659: Start Backup JobId 10659, Job=MIS2005.2009-03-02_18.00.49 03-Mar 02:22 brutus-dir JobId 10659: Using Device LTO 03-Mar 02:28 mis2005-fd JobId 10659: Generate VSS snapshots. Driver=VSS Win 2003, Drive(s)=CD 03-Mar 03:17 brutus-sd JobId 10659: Job write elapsed time = 00:54:49, Transfer rate = 87.27 M bytes/second 03-Mar 04:22 brutus-dir JobId 10659: Fatal error: Network error with FD during Backup: ERR=Connection reset by peer 03-Mar 04:22 brutus-dir JobId 10659: Fatal error: No Job status returned from FD. 03-Mar 04:22 brutus-dir JobId 10659: Error: Bacula brutus-dir 2.2.8 (26Jan08): 03-Mar-2009 04:22:44 Build OS: i686-pc-linux-gnu redhat JobId: 10659 Job:MIS2005.2009-03-02_18.00.49 Backup Level: Full Client: mis2005-fd 2.2.5 (09Oct07) Linux,Cross-compile,Win32 FileSet:MIS2005 2009-02-24 12:00:00 Pool: Daily (From Job resource) Storage:PV124-T (From Job resource) Scheduled time: 02-Mar-2009 18:00:00 Start time: 03-Mar-2009 02:22:40 End time: 03-Mar-2009 04:22:44 Elapsed time: 2 hours 4 secs Priority: 10 FD Files Written: 0 SD Files Written: 25,207 FD Bytes Written: 0 (0 B) SD Bytes Written: 287,038,274,967 (287.0 GB) Rate: 0.0 KB/s Software Compression: None VSS:no Storage Encryption: no Volume name(s): 36L3 Volume Session Id: 260 Volume Session Time:1233812348 Last Volume Bytes: 808,992,156,672 (808.9 GB) Non-fatal FD errors:0 SD Errors: 0 FD termination status: Error SD termination status: OK Termination:*** Backup Error *** -- Dan Langille BSDCan - The Technical BSD Conference : http://www.bsdcan.org/ PGCon - The PostgreSQL Conference: http://www.pgcon.org/ -- Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users Please see the Dunns Stores (Pty) Ltd. Email disclaimer here: http://www.dunns.co.za
[Bacula-users] FD Error On Backup
Hi All, I have this error which started after hardware upgrade of our MIS system and I can't fix it. I went through the archive and a lot of people, who previously had this same problem, suggested that it might be network hardware i.e. Network cable, switch, router, NIC - related but in my case I changed the network cable from cat5 to cat6, put the 2 servers on the same Gb switch and there is no router or firewall between the two - including the normal OS firewall. I have even gone as far as downgrading the client from 2.2.8 to 2.2.5 and still the problem persists, any ideas? System Info: Server: Bacula Version: 2.2.8 OS Version: Fedora 8 Client: Bacula Version: 2.2.5 OS Version: Windows Server 2003 R2 Notification Mail: 03-Mar 02:22 brutus-dir JobId 10659: Start Backup JobId 10659, Job=MIS2005.2009-03-02_18.00.49 03-Mar 02:22 brutus-dir JobId 10659: Using Device LTO 03-Mar 02:28 mis2005-fd JobId 10659: Generate VSS snapshots. Driver=VSS Win 2003, Drive(s)=CD 03-Mar 03:17 brutus-sd JobId 10659: Job write elapsed time = 00:54:49, Transfer rate = 87.27 M bytes/second 03-Mar 04:22 brutus-dir JobId 10659: Fatal error: Network error with FD during Backup: ERR=Connection reset by peer 03-Mar 04:22 brutus-dir JobId 10659: Fatal error: No Job status returned from FD. 03-Mar 04:22 brutus-dir JobId 10659: Error: Bacula brutus-dir 2.2.8 (26Jan08): 03-Mar-2009 04:22:44 Build OS: i686-pc-linux-gnu redhat JobId: 10659 Job:MIS2005.2009-03-02_18.00.49 Backup Level: Full Client: mis2005-fd 2.2.5 (09Oct07) Linux,Cross-compile,Win32 FileSet:MIS2005 2009-02-24 12:00:00 Pool: Daily (From Job resource) Storage:PV124-T (From Job resource) Scheduled time: 02-Mar-2009 18:00:00 Start time: 03-Mar-2009 02:22:40 End time: 03-Mar-2009 04:22:44 Elapsed time: 2 hours 4 secs Priority: 10 FD Files Written: 0 SD Files Written: 25,207 FD Bytes Written: 0 (0 B) SD Bytes Written: 287,038,274,967 (287.0 GB) Rate: 0.0 KB/s Software Compression: None VSS:no Storage Encryption: no Volume name(s): 36L3 Volume Session Id: 260 Volume Session Time:1233812348 Last Volume Bytes: 808,992,156,672 (808.9 GB) Non-fatal FD errors:0 SD Errors: 0 FD termination status: Error SD termination status: OK Termination:*** Backup Error *** With regards, Janco van der Merwe Technical Manager Dunns Stores (Pty) Ltd Switch Board: 011 541 3000 Direct: 011 541 3073 Cell: 083 291 8536 Fax: 0866308032 Please see the Dunns Stores (Pty) Ltd. Email disclaimer here: http://www.dunns.co.za/disclaimer.txt -- Open Source Business Conference (OSBC), March 24-25, 2009, San Francisco, CA -OSBC tackles the biggest issue in open source: Open Sourcing the Enterprise -Strategies to boost innovation and cut costs with open source participation -Receive a $600 discount off the registration fee with the source code: SFAD http://p.sf.net/sfu/XcvMzF8H___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Removable HDD backup
Hi, What I've done is the following: I've got 5 External USB HDD, one for Monday, one for Tuesday etc and have set up pools and jobs accordingly e.g. Monday, Tuesday, Wednesday etc. I've added a RunBeforeJob script to Mount the HDD to a dir called /opt/Backup Once the entire backup of the {WeekDay} Pool has completed the HDD is unmounted by a RunAfterJob script so that the user can just go and unplug the one HDD and plug in the next without having to umount and remount the HDDs. The only downside of doing this is that you have to have a job for every machine and x the amount of pools e.g. in my scenario I have 12 machines and 5 pools so the amount of jobs specified = 60 but it works. My run before job looks something like: mount -t ext3 /dev/sdb /opt/Backup Run After Job: umount /opt/Backup If you have a better way please let me know -Original Message- From: Dan Langille [EMAIL PROTECTED] To: bacula-users@lists.sourceforge.net Subject: [Bacula-users] Removable HDD backup Date: Wed, 12 Dec 2007 23:39:35 -0500 Tonight, on IRC, we solved the following problem (original posted to http://www.nabble.com/Removable-HDD-backup-to14286773.html): My goal is to have bacula backup onto an external HDD source that rotates. As in, there are three HDDs in rotation and at least one different HDD is put into the server every night. The other two HDDs are off somewhere safe. I need bacula to backup onto each HDD in such a way that a any of the HDDs will restore most of the files (as recent as it can be with the rotation schedule). Now I'm not sure if I should make bacula have more than one volume or if it can auto create volumes when another blank drive is present... any suggestions would be excellent. After concluding Bacula can't do this without Bacula knowing what was on each given HDD. I figured it could be done but it would be messy. It would involve three different FileSet definitions for each client, etc... Then the original figured we could just backup to local fixed HDD, then copy the Bacula volumes over to the HDD. I suggested rsync instead. This solution has the great features of always having a complete backup set local and at least two complete copies of the Volumes offsite at all times. We all thought we should post this for the archives. A very simple solution. Suggestions welcome though. -- Janco van der Merwe Open Solutions Tel: 011 305 2887 Cell: 083 291 8536 Fax: 0866978875 __ Think not those faithful who praise all thy words and actions; but those who kindly reprove thy faults. Socrates - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Removable HDD backup
Hi, I have a configuration with the following: 5 x 500GB External USB HDD in a 5 day rotation Each HDD is automatically mounted and unmounted so that the user can just unplug the used HDD and plug in the new one. This works well except that in order for this to work I had to create 5 pools for each working day {Monday - Friday} and I had to create a job per machine per pool so I ended up with 60 jobs in my Bacula conf because I have 12 machines. I have a Run Before Job that mounts the External HDDs to the /opt/Backup directory and after the backup is complete the Run After Job unmounts the HDD. If anyone has a better way of doing this please let me or if you want to take a look at my conf let me know -Original Message- From: Dan Langille [EMAIL PROTECTED] To: bacula-users@lists.sourceforge.net Subject: [Bacula-users] Removable HDD backup Date: Wed, 12 Dec 2007 23:39:35 -0500 Tonight, on IRC, we solved the following problem (original posted to http://www.nabble.com/Removable-HDD-backup-to14286773.html): My goal is to have bacula backup onto an external HDD source that rotates. As in, there are three HDDs in rotation and at least one different HDD is put into the server every night. The other two HDDs are off somewhere safe. I need bacula to backup onto each HDD in such a way that a any of the HDDs will restore most of the files (as recent as it can be with the rotation schedule). Now I'm not sure if I should make bacula have more than one volume or if it can auto create volumes when another blank drive is present... any suggestions would be excellent. After concluding Bacula can't do this without Bacula knowing what was on each given HDD. I figured it could be done but it would be messy. It would involve three different FileSet definitions for each client, etc... Then the original figured we could just backup to local fixed HDD, then copy the Bacula volumes over to the HDD. I suggested rsync instead. This solution has the great features of always having a complete backup set local and at least two complete copies of the Volumes offsite at all times. We all thought we should post this for the archives. A very simple solution. Suggestions welcome though. - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Postgres Dump command fails
Hi, Can someone please help me with the below? I'm not a BD expert so I don't have the faintest idea how to fix this. The permissions in the pg_hba.conf has been working for over 6 months and I suddenly received these errors after a Zabbix database was removed. Forwarded Message Subject: Bacula: Backup Error of carssrv4-fd Full Date: Thu, 13 Dec 2007 01:31:01 +0200 (SAST) 13-Dec 01:31 carssrv4-dir JobId 185: BeforeJob: run command /usr/local/etc/bacula/make_catalog_backup bacula bacula xxx 13-Dec 01:31 carssrv4-dir JobId 185: BeforeJob: pg_dump: SQL command failed 13-Dec 01:31 carssrv4-dir JobId 185: BeforeJob: pg_dump: Error message from server: ERROR: permission denied for relation client_group 13-Dec 01:31 carssrv4-dir JobId 185: BeforeJob: pg_dump: The command was: LOCK TABLE public.client_group IN ACCESS SHARE MODE 13-Dec 01:31 carssrv4-dir JobId 185: Error: Runscript: BeforeJob returned non-zero status=1. ERR=Child exited with code 1 - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Postgres Dump command fails
When the pg_dump command is run manually it works. My pg_hba.conf is set to allow all local users full access to the bacula DB What now? -Original Message- From: Dan Langille [EMAIL PROTECTED] To: Janco van der Merwe [EMAIL PROTECTED] Cc: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Postgres Dump command fails Date: Thu, 13 Dec 2007 07:57:34 -0500 Janco van der Merwe wrote: Hi, Can someone please help me with the below? I'm not a BD expert so I don't have the faintest idea how to fix this. The permissions in the pg_hba.conf has been working for over 6 months and I suddenly received these errors after a Zabbix database was removed. Forwarded Message Subject: Bacula: Backup Error of carssrv4-fd Full Date: Thu, 13 Dec 2007 01:31:01 +0200 (SAST) 13-Dec 01:31 carssrv4-dir JobId 185: BeforeJob: run command /usr/local/etc/bacula/make_catalog_backup bacula bacula xxx If you issue that command from the command line, does it succeed? By the way, if non-trusted users are on this system, and even if they aren't, you can avoid having the password in this email by using .pgpass in Bacula's home dir: http://www.postgresql.org/docs/8.2/static/libpq-pgpass.html 13-Dec 01:31 carssrv4-dir JobId 185: BeforeJob: pg_dump: SQL command failed 13-Dec 01:31 carssrv4-dir JobId 185: BeforeJob: pg_dump: Error message from server: ERROR: permission denied for relation client_group What are the table permissions? $ psql bacula Welcome to psql 8.2.5, the PostgreSQL interactive terminal. Type: \copyright for distribution terms \h for help with SQL commands \? for help with psql commands \g or terminate with semicolon to execute query \q to quit bacula=# \dp They should all be simliar permissions for the bacula user. BTW, you didn't tell us what version of Bacula, or the OS you are using. 13-Dec 01:31 carssrv4-dir JobId 185: BeforeJob: pg_dump: The command was: LOCK TABLE public.client_group IN ACCESS SHARE MODE How odd, but let's check the permissions first. 13-Dec 01:31 carssrv4-dir JobId 185: Error: Runscript: BeforeJob returned non-zero status=1. ERR=Child exited with code 1 - SF.Net email is sponsored by: Check out the new SourceForge.net Marketplace. It's the best place to buy or sell services for just about anything Open Source. http://ad.doubleclick.net/clk;164216239;13503038;w?http://sf.net/marketplace ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Postgres Dump command fails
Sorry I just read the rest of your mail..it has been one of those days. Bacula version: 2.2.5 OS: CentOS5 The output requested: bacula=# \dp Access privileges for database bacula Schema | Name | Type | Access privileges +--+--+- public | basefiles| table| {root=arwdRxt/root,bacula=arwdRxt/root} public | basefiles_baseid_seq | sequence | {root=arwdRxt/root,bacula=rw/root} public | cdimages | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | client | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | client_clientid_seq | sequence | {root=arwdRxt/root,bacula=rw/root} public | client_group | table| public | client_group_client_group_id_seq | sequence | public | client_group_member | table| public | counters | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | device | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | device_deviceid_seq | sequence | {root=arwdRxt/root,bacula=rw/root} public | file | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | file_fileid_seq | sequence | {root=arwdRxt/root,bacula=rw/root} public | filename | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | filename_filenameid_seq | sequence | {root=arwdRxt/root,bacula=rw/root} public | fileset | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | fileset_filesetid_seq| sequence | {root=arwdRxt/root,bacula=rw/root} public | job | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | job_jobid_seq| sequence | {root=arwdRxt/root,bacula=rw/root} public | jobmedia | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | jobmedia_jobmediaid_seq | sequence | {root=arwdRxt/root,bacula=rw/root} public | location | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | location_locationid_seq | sequence | {root=arwdRxt/root,bacula=rw/root} public | locationlog | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | locationlog_loclogid_seq | sequence | {root=arwdRxt/root,bacula=rw/root} public | log | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | log_logid_seq| sequence | {root=arwdRxt/root,bacula=rw/root} public | media| table| {root=arwdRxt/root,bacula=arwdRxt/root} public | media_mediaid_seq| sequence | {root=arwdRxt/root,bacula=rw/root} public | mediatype| table| {root=arwdRxt/root,bacula=arwdRxt/root} public | mediatype_mediatypeid_seq| sequence | {root=arwdRxt/root,bacula=rw/root} public | path | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | path_pathid_seq | sequence | {root=arwdRxt/root,bacula=rw/root} public | pool | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | pool_poolid_seq | sequence | {root=arwdRxt/root,bacula=rw/root} public | status | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | storage | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | storage_storageid_seq| sequence | {root=arwdRxt/root,bacula=rw/root} public | unsavedfiles | table| {root=arwdRxt/root,bacula=arwdRxt/root} public | version | table| {root=arwdRxt/root,bacula=arwdRxt/root} (40 rows) -Original Message- From: Dan Langille [EMAIL PROTECTED] To: Janco van der Merwe [EMAIL PROTECTED] Cc: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Postgres Dump command fails Date: Thu, 13 Dec 2007 07:57:34 -0500 Janco van der Merwe wrote: Hi, Can someone please help me with the below? I'm not a BD expert so I don't have the faintest idea how to fix this. The permissions in the pg_hba.conf has been working for over 6 months and I suddenly received these errors after a Zabbix database was removed. Forwarded Message Subject: Bacula: Backup Error of carssrv4-fd Full Date: Thu, 13 Dec 2007 01:31:01 +0200 (SAST) 13-Dec 01:31 carssrv4-dir JobId 185: BeforeJob: run command /usr/local/etc/bacula/make_catalog_backup bacula bacula xxx If you issue that command from the command line, does it succeed? By the way, if non-trusted users are on this system, and even
[Bacula-users] Tape Drive Issue
Hi, I have a strange problem and hop that someone will be able to help me Bacula Version: 2.0.5 OS: Fedora Core 6 Tape Drive: IBM ULTRIUM-TD3 DLT VS 160 I've set the automatic labelling of volumes and it would appear that it is working until the tape is ejected and inserted again. It is if there is no data on the tape when it is inserted again but here is the funny thing, when you manually label the the tape and bacula sends you the label conformation everything is ok, I mean you write to the tape, restore from the tape, unmount and remount the tape and the everything works except when you physically eject the tape, all data, it would seem. is lost. This happens to all the tapes and I'm really confused as to why something like this will happen especially only when the tape is ejected. According to Bacula the backups to this tape went through successfully, not that I think this is a bacula problem, but I don't really know where to start looking for a solution. Has anyone else had this problem before? -- Janco van der Merwe Open Solutions Tel: 011 305 2887 Cell: 083 291 8536 Fax: 0866978875 __ Think not those faithful who praise all thy words and actions; but those who kindly reprove thy faults. Socrates - SF.Net email is sponsored by: The Future of Linux Business White Paper from Novell. From the desktop to the data center, Linux is going mainstream. Let it simplify your IT future. http://altfarm.mediaplex.com/ad/ck/8857-50307-18918-4 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] All the problems with Bacula
Shon, If it took you four months to figure out how Bacula works maybe you shouldn't be allowed near any computer! There are ways and means to do things in Bacula and let me tell you this if you couldn't do it or find a way you are really incompetent and again should be allowed to operate a PC. I have Bacula running at several sites without a glitch and backing up over 1 TB of data on one site with a LTO3 Autoloader, and BTW this was done when I was still a novice in the Linux World, so if I could do it anyone canwell it looks like you're the excpetion not the rule. On the Windows side of things there are no problems, I've backuped and restored several machine using Bacula and the Bart PE and with great success. Basically I can't see that its useable for anything more than backing up a single system, and even then better be careful.WHAT, ARE YOU OUT OF FREAKING MIND, YOU NUMB SKULL, here is a tip and I'll try to do this in a language that you might understand LEARN.HOWTOUSE.A..COMPUTER You know what Bacula Usersgood riddance to bad trash and lastely he'll 10 to 1 make a [EMAIL PROTECTED] up of the other software as well! On Wed, 2007-11-21 at 08:07 -0500, Shon Stephens wrote: Ok. This is a rant and you can remove it from the list if you want to later. I just have to vent. Bacula is incredibly complex to setup. Its taken 4 months and its still not working correctly. Things that should be easy that Bacula makes overly complex: Labeling tapes Assigning tapes to pools Reassigning tapes to pools Managing disk media Things Bacula can't seem to get right: Detecting a tape is in the drive and using it Even though the correctly labeled tape is in the drive, and has the right Volume label, and is marked Append, and is from the correct Pool Bacula is still waiting for a mount request. Every external program recognizes that the tape is in the drive and mounted. Not Bacula Catalog entries. I've not had a single backup job where the right entries made it into the Catalog Windows hosts. Good luck figuring out the esoteric path syntax because its different in different chapters of the manual and also different depending on which part of the config you are editing Basically I can't see that its useable for anything more than backing up a single system, and even then better be careful. I'm going with Arkeia Network Backup. Might cost money, but at least it will work as advertised which is more than can be said for Crapula - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- Janco van der Merwe Open Solutions Tel: 011 305 2887 Cell: 083 291 8536 Fax: 0866978875 __ Think not those faithful who praise all thy words and actions; but those who kindly reprove thy faults. Socrates - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] All the problems with Bacula
Guys, Sorry, but - there must be a but - I deal with this sort of people everyday and it has come to a point where being nice and keeping quite is not a solutions anymore. Ok, I do understand that Bacula can be difficult some times but that is why this list is theream I wrong? I also have had blonde moments and posted it to top it all but at least I got an answer from a lot more patient people than I, the point being, I did a quick search and did not find any posts from this guy asking for help, if I'm wrong on this one please excuse me, and now lashing out on the listis just not on, I don't know maybe I'm wrong. Shon, I apologize sincerely and would like nothing more for you stay with Bacula because it is a brilliant backup solutions, hell I have backed up an entire Windows Domain Controller and restored it as it was and put that exact machine live whilst I reloaded the old DC. Once again I apologize. On Wed, 2007-11-21 at 16:08 +0100, Arno Lehmann wrote: Hi, 21.11.2007 15:43,, Janco van der Merwe wrote:: Shon, If it took you four months to figure out how Bacula works maybe you shouldn't be allowed near any computer! Janco, calm down please! Even if you or others don't agree with Shon don't resort to name-calling! Bacula as a whole - and that includes the user community we find here - works also (and in my opinion, mainly) because we try to solve problems politely. I, too, probably sound a bit harsh from time to time, but I really try not to insult anyone. Please try to do the same. And then let's see if Shon wants some more directed support later - he wouldn't be the first struggling with the great flexibility Bacula offers. Then we can put some effort into getting him a working Bacula system. That would be much better than starting a flame war, I think. And I hope you all agree :-) Arno -- Janco van der Merwe Open Solutions Tel: 011 305 2887 Cell: 083 291 8536 Fax: 0866978875 __ Think not those faithful who praise all thy words and actions; but those who kindly reprove thy faults. Socrates - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Using bsr files to restore / re-catalog DB
Hi, I hope someone can help me with this one. Someone approached me to help with their Bacula but the guy who set it up has left and they are in a bit of a sticky situation. First the nitty gritty: Bacula 1.38.1 with MySQL RHEL 4 Using a Dell PV-124T with LTO3 These people have different backups pools namely - Daily with 10 volumes Weekly with 4 volumes Monthly with 36 volumes and should have had a volume retention period of 1095 days because they keep the Monthly backups for three years The client wants to restore a file on a volume that is 1 year old and because the File, job and volume retentions were specified incorrectly the entire job was purged from the catalog, a long with other monthly backup jobs, and I have no reference of those Volumes or jobs in the catalog except for the bsr files. Is there a way that I can restore files from that volume using the bsr files or one better, can I use the bsr files to rebuild the catalog and set the correct retention periods where applicable and if that is possible how will I go about doing it? I tried searching the net, the user list and the manual for similar situations but was unable to find anything. Can anyone help me or GENTLY point out that it is in the manual and that I missed it? -- Janco van der Merwe Open Solutions Tel: 011 305 2887 Cell: 083 291 8536 Fax: 0866978875 __ Think not those faithful who praise all thy words and actions; but those who kindly reprove thy faults. Socrates - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] 2.2.4 ok to run?
Michael, I tried replying to the mail that you sent last night but shortly after we had power failures but in short: We run Bacula 2.2.5 with Postgres 8.1.4 Release 1.1 (The version on the DVD) and had no problems. My colleague seems to think, from the errors that you received, that you require certain libs or that the versions of your postgres, postgres_server and postgres_devel differ or, again from the error, that the version 8.2.x is not compatible with Bacula - I don't know going on what he said! On Thu, 2007-10-25 at 15:20 -0400, Michael Galloway wrote: ok, since i cannot get 2.2.5 to build, i guess i will have to drop back to the 2.2.4 EL5/centOS5 rpms off sourceforge. is 2.2.4 ok to run, or are there outstanding bugs in it? -- michael - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- Janco van der Merwe Open Solutions Tel: 011 305 2887 Cell: 083 291 8536 Fax: 0866978875 __ Think not those faithful who praise all thy words and actions; but those who kindly reprove thy faults. Socrates - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] bconsole with exchange
Have you created a mail account in AD for the bacula user and did you specify the bacula machine's IP as a safe host to relay through Exchange? On Thu, 2007-10-25 at 12:36 +0200, luyigui loholhlki wrote: hi thx for this beautiful mailing-list in fact i have i used to use a postfix as email server inorder to send notification with bsmtp but when i switched to exchange server that didnt wok any more can u please help me it's very urgent thx in advance __ Ne gardez plus qu'une seule adresse mail ! Copiez vos mails vers Yahoo! Mail - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- Janco van der Merwe Open Solutions Tel: 011 305 2887 Cell: 083 291 8536 Fax: 0866978875 __ Think not those faithful who praise all thy words and actions; but those who kindly reprove thy faults. Socrates - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] stored build problems centOS5/postgresql
to `krb5_unparse_name' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:133: undefined reference to `error_message' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:142: undefined reference to `error_message' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:145: undefined reference to `krb5_free_context' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:153: undefined reference to `error_message' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:168: undefined reference to `krb5_cc_close' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:169: undefined reference to `krb5_free_context' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:164: undefined reference to `error_message' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:167: undefined reference to `krb5_free_principal' /usr/lib64/libpq.a(fe-auth.o): In function `pg_krb5_sendauth': /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:236: undefined reference to `krb5_sname_to_principal' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:240: undefined reference to `error_message' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:258: undefined reference to `krb5_free_principal' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:263: undefined reference to `krb5_sendauth' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:293: undefined reference to `krb5_free_error' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:298: undefined reference to `krb5_free_principal' /builddir/build/BUILD/postgresql-8.1.9/src/interfaces/libpq/fe-auth.c:288: undefined reference to `error_message' collect2: ld returned 1 exit status make[1]: *** [bscan] Error 1 make[1]: Leaving directory `/usr/local/bacula-2.2.5/src/stored' == Error in /usr/local/bacula-2.2.5/src/stored == looks like its all authentication issues. what do i need to do to resolve this? thanks! -- michael - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users -- Janco van der Merwe Open Solutions Tel: 011 305 2887 Cell: 083 291 8536 Fax: 0866978875 __ Think not those faithful who praise all thy words and actions; but those who kindly reprove thy faults. Socrates - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Automatic Restore Jobs?
On Tue, 2007-10-16 at 08:34 -0400, Dan Langille wrote: On 16 Oct 2007 at 12:59, Janco van der Merwe wrote: OK I read the thread and it gave me basically what I thought I had to do but I'm not to keen putting the Restore Job in a RunAfterJob script I was hoping that there was an alternative way of doing this. The rsync might work but I'm not to sure how it'll work if an entire system is backed up and restored on another except if the hardware was the same. My whole idea is to try to introduce high availability so if one server goes down we can start the other, most probably a VM, and carry on as if nothing happened until we get the original server back up and running. I know that there are Server Mirroring Software out there but they cost a lot and in a company with a tight budgetwell you know the rest. rsync? Between the two servers. But still use Bacula for backups. rsync is not a backup. It is a copy. The rsync was only an idea, maybe an ambitious idea, but an idea never the less. I went on the Search for Open Source HA software and came across this: http://www.drbd.org/. Hopefully this will do the Job. Backups aren't my main concern because Bacula has that covered, what I was looking for was something that had HA capabilities and I hoped Bacula had something like that but have a look at the URLquite interesting. - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Single Director Daemon with multiples Storage Daemons
Hi, I just want to know if anyone has tried configuring a single director with multiple SDs? - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Single Director Daemon with multiples Storage Daemons
We mostly use the Red-Hat Distro's i.e. Fedora, RHEL and CentOS On Fri, 2007-10-12 at 09:53 +0300, Silver Salonen wrote: I don't know about that. I guess it's the question about your distribution packages. I use FreeBSD and I can choose from its port (e.g. package) what to build and what not to. - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Single Director Daemon with multiples Storage Daemons
I know it's actually incredible but is there a way of only compiling the SD and FD binaries, reason why I'm asking is that in order to get the SD installed I had to compile the entire Bacula which meant installing a DB, not that its that big of an issue I was just wondering if there is way or an option like --with-storage-only? But Bacula is the best written Software I have ever had the pleasure of working with!! On Fri, 2007-10-12 at 09:45 +0300, Silver Salonen wrote: Hi. I have. Works nicely. - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Single Director Daemon with multiples Storage Daemons
On Fri, 2007-10-12 at 13:03 +0200, Arno Lehmann wrote: Hi, 12.10.2007 09:47,, Silver Salonen wrote:: On Friday 12 October 2007 10:42, Arno Lehmann wrote: ... But Bacula is the best written Software I have ever had the pleasure (I leave this in to keep the mail on topic :-) of working with!! You know what they (in particular, Terry Pratchett) say about using multiple excamation marks? ;-) Actually I don't, but I'd like to know, because I really need smth funny to think about when I see such a case ;) “Multiple exclamation marks are a sure sign for a diseased mind!” and “And all those exclamation marks, you notice? Five? A sure sign of someone who wears his underpants on his head.” You are just jealous because the voices only talk to me :-) (found in wikipedia - I don't have the books here in my office) Arno - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Backup Error
Hi, Can anyone tell me why I'm receiving these errors? 03-Oct 02:49 subver-dir: Start Backup JobId 332, Job=sqlengine.2007-10-03_02.00.01 03-Oct 02:49 subver-dir: Pruned 3 Jobs on Volume Daily_Backup_SQL-0001 from catalog. 03-Oct 02:49 subver-dir: ua_purge.c:611 All records pruned from Volume Daily_Backup_SQL-0001; marking it Purged 03-Oct 02:49 subver-dir: Pruned 2 Jobs on Volume Daily_Backup_SQL-0002 from catalog. 03-Oct 02:49 subver-dir: Recycled volume Daily_Backup_SQL-0001 03-Oct 02:50 subver-sd: Recycled volume Daily_Backup_SQL-0001 on device LocalStorage (/opt/Backup), all previous data lost. 03-Oct 02:54 sqlengine-fd: Generate VSS snapshots. Driver=VSS Win 2003, Drive(s)=C 03-Oct 06:44 subver-sd: sqlengine.2007-10-03_02.00.01 Fatal error: append.c:259 Network error on data channel. ERR=Connection reset by peer 03-Oct 06:48 sqlengine-fd: sqlengine.2007-10-03_02.00.01 Fatal error: ../../filed/backup.c:873 Network send error to SD. ERR=Input/output error 03-Oct 06:44 subver-sd: Job write elapsed time = 03:54:20, Transfer rate = 747.7 K bytes/second 03-Oct 06:48 sqlengine-fd: sqlengine.2007-10-03_02.00.01 Error: ../../lib/bnet.c:406 Write error sending len to Storage daemon:subver:9103: ERR=Input/output error 03-Oct 06:50 sqlengine-fd: VSS Writer (BackupComplete): MSDEWriter, State: 0x1 (VSS_WS_STABLE) 03-Oct 06:50 sqlengine-fd: VSS Writer (BackupComplete): System Writer, State: 0x1 (VSS_WS_STABLE) 03-Oct 06:50 sqlengine-fd: VSS Writer (BackupComplete): Registry Writer, State: 0x1 (VSS_WS_STABLE) 03-Oct 06:50 sqlengine-fd: VSS Writer (BackupComplete): COM+ REGDB Writer, State: 0x1 (VSS_WS_STABLE) 03-Oct 06:50 sqlengine-fd: VSS Writer (BackupComplete): Event Log Writer, State: 0x1 (VSS_WS_STABLE) 03-Oct 06:50 sqlengine-fd: VSS Writer (BackupComplete): WMI Writer, State: 0x1 (VSS_WS_STABLE) 03-Oct 06:50 sqlengine-fd: VSS Writer (BackupComplete): TermServLicensing, State: 0x1 (VSS_WS_STABLE) 03-Oct 06:46 subver-dir: sqlengine.2007-10-03_02.00.01 Error: Bacula 2.0.3 (06Mar07): 03-Oct-2007 06:46:37 The MS-SQL makes its own backup and bacula just picks up the file and writes it to the backup media - sometimes it works most of the time it doesn't and when I manually run the backup it works?? Thank you in advance. - This SF.net email is sponsored by: Microsoft Defy all challenges. Microsoft(R) Visual Studio 2005. http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] FD - SD Error
Hi Guys, I have the following: 30-Jul 02:01 subver-dir: Start Backup JobId 57, Job=sqlengine.2007-07-30_02.00.01 30-Jul 02:01 subver-sd: Volume Daily_Backup-0002 previously written, moving to end of data. 30-Jul 02:08 sqlengine-fd: Generate VSS snapshots. Driver=VSS Win 2003, Drive(s)=C 30-Jul 04:12 sqlengine-fd: sqlengine.2007-07-30_02.00.01 Fatal error: ../../filed/backup.c:873 Network send error to SD. ERR=Input/output error 30-Jul 04:07 subver-sd: sqlengine.2007-07-30_02.00.01 Fatal error: append.c:259 Network error on data channel. ERR=Connection reset by peer 30-Jul 04:07 subver-sd: Job write elapsed time = 02:05:26, Transfer rate = 840.4 K bytes/second 30-Jul 04:12 sqlengine-fd: sqlengine.2007-07-30_02.00.01 Error: ../../lib/bnet.c:406 Write error sending len to Storage daemon:subver:9103: ERR=Input/output error I have my suspicions about what this could be but I need expert opinions before I brake something. The set up: The machine sqlengine is in a DMZ and a Linux Firewall using IPtables is suppose to NAT everything over ports 9101-9103 to the internal LAN Bacula server address, subver, but it seems that something isn't working as it should. I can use the bconsole from sqlengine to subver if that is anything to go by. Any suggestions? - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] FD - SD Error
I can telnet to all the bacula ports from the sqlengine machine and I ran a tcpdump to monitor the packets from the sqlengine machine to the bacula server and all is OK. I don't think it's the Firewall anymore, I realized with a shock that the SQL backup is over 30GB and I didn't configure my Bacula with Large File support during the install so that I think is the problem. Do you know how I can enable large file support without having to re compile again? On Wed, 2007-08-01 at 08:13 -0500, Drew Bentley wrote: On 8/1/07, Janco van der Merwe [EMAIL PROTECTED] wrote: Hi Guys, I have the following: 30-Jul 02:01 subver-dir: Start Backup JobId 57, Job=sqlengine.2007-07-30_02.00.01 30-Jul 02:01 subver-sd: Volume Daily_Backup-0002 previously written, moving to end of data. 30-Jul 02:08 sqlengine-fd: Generate VSS snapshots. Driver=VSS Win 2003, Drive(s)=C 30-Jul 04:12 sqlengine-fd: sqlengine.2007-07-30_02.00.01 Fatal error: ../../filed/backup.c:873 Network send error to SD. ERR=Input/output error 30-Jul 04:07 subver-sd: sqlengine.2007-07-30_02.00.01 Fatal error: append.c:259 Network error on data channel. ERR=Connection reset by peer 30-Jul 04:07 subver-sd: Job write elapsed time = 02:05:26, Transfer rate = 840.4 K bytes/second 30-Jul 04:12 sqlengine-fd: sqlengine.2007-07-30_02.00.01 Error: ../../lib/bnet.c:406 Write error sending len to Storage daemon:subver:9103: ERR=Input/output error I have my suspicions about what this could be but I need expert opinions before I brake something. The set up: The machine sqlengine is in a DMZ and a Linux Firewall using IPtables is suppose to NAT everything over ports 9101-9103 to the internal LAN Bacula server address, subver, but it seems that something isn't working as it should. I can use the bconsole from sqlengine to subver if that is anything to go by. Any suggestions? Seems to indicate possible firewall or the fd (client) can't reach the SD on it's specific port. Can you telnet from the client to the SD on port 9103? That should indicate if you have it blocked or not. -drew - This SF.net email is sponsored by: Splunk Inc. Still grepping through log files to find problems? Stop. Now Search log events and configuration files using AJAX and a browser. Download your FREE copy of Splunk now http://get.splunk.com/ ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Marking Directories/Files to be restored
We are trying to run a DR test and I'm have some problems CommandDescription ====== cd change current directory count count marked files in and below the cd dirlong list current directory, wildcards allowed done leave file selection mode estimate estimate restore size exit same as done command find find files, wildcards allowed help print help ls list current directory, wildcards allowed lsmark list the marked files in and below the cd mark mark dir/file to be restored recursively, wildcards allowed markdirmark directory name to be restored (no files) pwdprint current working directory unmark unmark dir/file to be restored recursively in dir unmarkdir unmark directory name only no recursion quit quit and do not do restore ? print help $ ls Arthur Data/ Departments/ UCS/ $ mark Arthur Data No files marked. $ markdir Arthur Data No directories marked. $ lsmark $ On this particular Win2003 Server client we backup to partitions, the D:/ and E:/. On the E:/ partition we have the 3 directories shown above but I only want to restore the Arthur Data dir but as you can see it does not want to mark it. I tried to mark one of the other dirs but it does exactly the same, I even tried marking the E:/ but nothing. Any idea? Janco v.d Merwe Network Administrator Dunns Stores (Pty) Ltd Switchboard: (011) 541 3000 Direct: (011) 541 3007 Fax: 0866321708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] FW: Marking Directories/Files to be restored
Sorry problem solved - user error Janco v.d Merwe Network Administrator Dunns Stores (Pty) Ltd Switchboard: (011) 541 3000 Direct: (011) 541 3007 Fax: 0866321708 From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Janco van der Merwe Sent: 18 January, 2007 10:55 To: bacula-users@lists.sourceforge.net Subject: [Bacula-users] Marking Directories/Files to be restored We are trying to run a DR test and I'm have some problems CommandDescription ====== cd change current directory count count marked files in and below the cd dirlong list current directory, wildcards allowed done leave file selection mode estimate estimate restore size exit same as done command find find files, wildcards allowed help print help ls list current directory, wildcards allowed lsmark list the marked files in and below the cd mark mark dir/file to be restored recursively, wildcards allowed markdirmark directory name to be restored (no files) pwdprint current working directory unmark unmark dir/file to be restored recursively in dir unmarkdir unmark directory name only no recursion quit quit and do not do restore ? print help $ ls Arthur Data/ Departments/ UCS/ $ mark Arthur Data No files marked. $ markdir Arthur Data No directories marked. $ lsmark $ On this particular Win2003 Server client we backup to partitions, the D:/ and E:/. On the E:/ partition we have the 3 directories shown above but I only want to restore the Arthur Data dir but as you can see it does not want to mark it. I tried to mark one of the other dirs but it does exactly the same, I even tried marking the E:/ but nothing. Any idea? Janco v.d Merwe Network Administrator Dunns Stores (Pty) Ltd Switchboard: (011) 541 3000 Direct: (011) 541 3007 Fax: 0866321708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Schedules
Hi, I hope someone can help me. First the nitty gritty stuff: Bacula 1.38.11 RHEL 4 What I want to do is create a monthly schedule that runs every 2nd Tuesday of the month but we have a daily schedule that runs Monday - Friday is there a way that I can tell Bacula not to do a Daily on the 2nd Tuesday of a month. I have the correct configuration for the monthly and daily schedule but they run simultaneous which takes up a lot of time. I would appreciate it if any body can tell me what I have to do so that the daily runs as normal but doesn't run on the 2nd Tuesday of every month. That is aal I need the rest has already been done but I'm struggling a little with this one. Janco v.d Merwe Network Administrator Dunns Stores (Pty) Ltd Switchboard: (011) 541 3000 Direct: (011) 541 3007 Fax: 0866321708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys - and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Volume retention and Volume Use Duration
Can someone please help me? If I understood correctly that if you use the Volume Use Duration directive the volume status will be changed to used after the specified time parameter but as you can see my Bacula is not doing it. +-++---+-+--+--+-+--+---+---+-+ | MediaId | VolumeName | VolStatus | VolBytes | VolFiles | VolRetention | Recycle | Slot | InChanger | MediaType | LastWritten | +-++---+-+--+--+-+--+---+---+-+ | 1 | 01L3 | Append | 279,046,895,474 | 283 | 518,400 | 1 | 1 | 1 | LTO3 | 2006-10-17 17:12:28 | | 2 | 02L3 | Full | 435,445,422,908 | 445 | 518,400 | 1 | 2 | 0 | LTO3 | 2006-10-13 12:00:02 | | 3 | 03L3 | Used | 441,597,354,449 | 450 | 518,400 | 1 | 3 | 0 | LTO3 | 2006-10-14 02:19:11 | | 4 | 04L3 | Full | 434,889,664,717 | 444 | 518,400 | 1 | 4 | 0 | LTO3 | 2006-10-17 12:00:02 | | 5 | 05L3 | Purged | 471,410,554,157 | 480 | 518,400 | 1 | 7 | 0 | LTO3 | 2006-10-07 08:04:17 | | 6 | 06L3 | Purged | 429,702,759,026 | 439 | 518,400 | 1 | 5 | 0 | LTO3 | 2006-10-10 21:00:05 | | 7 | 07L3 | Append | 437,022,761,665 | 446 | 518,400 | 1 | 6 | 0 | LTO3 | 2006-10-11 06:30:10 | | 8 | 08L3 | Full | 429,469,638,207 | 439 | 518,400 | 1 | 5 | 0 | LTO3 | 2006-10-12 12:00:02 | +-++---+-+--+--+-+--+---+---+-+ In my bacula-dir.conf Ive got the following: Pool { Name = Daily Pool Type = Backup Volume Retention = 6 days Volume Use Duration = 23 hours Recycle = yes AutoPrune = yes Recycle Oldest Volume = yes Accept Any Volume = yes } Reason I have the Volume Use Duration = 23 hours is because we have an Auto Changer and I want it to write to one tape per day but there are 2 schedules: Schedule { Name = Daily Run = Full mon-fri at 21:00 } Schedule { Name = UCSDaily Run = Full mon-fri at 12:00 } Now the problem is when I run the status dir in the console the output is as follows: Scheduled Jobs: Level Type Pri Scheduled Name Volume === Full Backup 1 17-Oct-06 21:00 Fasdev 01L3 Full Backup 7 17-Oct-06 21:00 F700100 01L3 Full Backup 8 17-Oct-06 21:00 MIS02Daily 01L3 Full Backup 9 17-Oct-06 21:00 Ceaser 01L3 Full Backup 10 17-Oct-06 21:00 Maximus 01L3 Full Backup 11 17-Oct-06 21:00 Navision 01L3 Full Backup 12 17-Oct-06 21:00 Bacula 01L3 Full Backup 13 17-Oct-06 21:00 Mail 01L3 Full Backup 14 17-Oct-06 21:00 Firewall 01L3 Full Backup 15 17-Oct-06 21:00 Fasint 01L3 Full Backup 2 18-Oct-06 12:00 Fas000s 01L3 Full Backup 3 18-Oct-06 12:00 Fas010c 01L3 Full Backup 4 18-Oct-06 12:00 Fas020c 01L3 Full Backup 5 18-Oct-06 12:00 Fas010b 01L3 Full Backup 6 18-Oct-06 12:00 Fasdsa 01L3 Full Backup 16 18-Oct-06 12:00 Fas000u 01L3 As you can see the 12:00 schedule ran using Volume 01L3 and the 21:00 should also use Volume 01L3 but shouldnt the volume be marked as used before the next 12:00 schedule runs? Please look at the Scheduled column what I basically want is for the jobs that are scheduled for the 18th should have a different volume label and the way that I understood is that if I use the Volume Use Duration that will be my solution. Does it have something to do with my volume retention period? Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo
[Bacula-users] Strange behavior
Hi, After I changed scheduled I started receiving these messages: 13-Oct 12:00 brutus-dir: Start Backup JobId 281, Job=Fas000s.2006-10-13_12.00.00 13-Oct 12:00 brutus-sd: Fas000s.2006-10-13_12.00.00 Error: block.c:538 Write error at 445:1 on device LTO (/dev/st0). ERR=Input/output error. 13-Oct 12:00 brutus-sd: Fas000s.2006-10-13_12.00.00 Error: Error writing final EOF to tape. This Volume may not be readable. dev.c:1542 ioctl MTWEOF error on LTO (/dev/st0). ERR=Input/output error. 13-Oct 12:00 brutus-sd: End of medium on Volume 02L3 Bytes=435,445,422,908 Blocks=6,749,843 at 13-Oct-2006 12:00. I know this because the volume is not in the drive because I ejected the volume but I ran a update slots command in the bconsole and usually helped. What happened was that I was requested to change the backup time from 21:00 in the evening to 12:00 during the day for some servers and since then I have been receiving these logs. The jobs execute as normal but I received these messages. Is it because that the Volume 02L3 was used @ 12:00 yesterday and again @ 21:00 last night and it wants the volume again for the latest backup? My current Use Volume duration 23 hours, shouldnt the tape be set as used or should the Volume duration be less perhaps? The reason for the Volume duration is because we have Autochanger and we want the daily backups on a separate tape for each day. Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Bacula and Softlinks
Hi, Before wasting valuable time in testing can someone tell me how Bacula will react with softlinks? Is it worth going that route? To give you an idea on the one server it has 3 partitions and the aim is to backup the last 3 months of data but the twist is that the directories and partitions of where the data is will change from month to month. What we thought is creating a backup dir on the / partition and then a script that creates softlinks to the required directories within the /backup dir which brings me to the above question will Bacula follow the softlinks? Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Compression ratio
By Client compression do you mean the Compression=GZIP or the default compression? My Bacula is pretty much still default nothing special at this pointwell apart from the amount of data being backed up. If it is not possible at this point is there a possibility in the near future for Bacula to include the ratio, by that I mean will it be possible for the Bacula to include the ratio from the Hardware? Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Kern Sibbald [mailto:[EMAIL PROTECTED] Sent: 27 September, 2006 08:29 To: bacula-users@lists.sourceforge.net Cc: Janco van der Merwe Subject: Re: [Bacula-users] Compression ratio On Wednesday 27 September 2006 08:15, Janco van der Merwe wrote: On my previous e-mail that I sent to the forum I showed you the amount of data that was backed up to a single LTO3 tape and I received a request from the management to see if I, or rather Bacula, can't give the compression ratio details in the notification e-mail. I went through the manual to see if there is a way but I can't find it, most probably missed it, but is there a way that I can do that? Bacula provides the compression ratio if you turn on Client compression, which I don't recommend especially with the results you are getting. With hardware compression, Bacula has insufficient information. Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] Amazing
Once again Bacula amazed me Please see the Last Volume Bytes section of the Bacula e-mail sent to me. This is on a LTO 3 which you all know is 800 GB max compressed. What amazed me more is that I restored the data and all is working. I had the same with my AIT but that was 295GB on a 260GB but thisthis is just incredible! Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL PROTECTED] Sent: 26 September, 2006 06:47 To: [EMAIL PROTECTED] Subject: Bacula: Backup OK of f700100-fd Full 26-Sep 06:41 brutus-dir: Start Backup JobId 71, Job=F700100.2006-09-25_21.00.14 26-Sep 06:47 brutus-dir: Bacula 1.38.11 (28Jun06): 26-Sep-2006 06:47:25 JobId: 71 Job:F700100.2006-09-25_21.00.14 Backup Level: Full Client: f700100-fd i686-pc-linux-gnu,redhat,7.3 FileSet:F700100 2006-09-21 04:18:35 Pool: Daily Storage:PV124-T Scheduled time: 25-Sep-2006 21:00:13 Start time: 26-Sep-2006 06:41:04 End time: 26-Sep-2006 06:47:25 Elapsed time: 6 mins 21 secs Priority: 18 FD Files Written: 12,586 SD Files Written: 12,586 FD Bytes Written: 3,724,677,819 (3.724 GB) SD Bytes Written: 3,726,028,597 (3.726 GB) Rate: 9776.1 KB/s Software Compression: None Volume name(s): 04L3 Volume Session Id: 45 Volume Session Time:1158820025 Last Volume Bytes: 1,052,817,801,596 (1.052 TB) Non-fatal FD errors:0 SD Errors: 0 FD termination status: OK SD termination status: OK Termination:Backup OK This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Forcing use of next tape in Autochanger
Is there a script that can be written so that when the last job is complete Bacula automatically unloads the tape to it original slot and mount a new tape from a different slot? Reason I ask is that I have the same question but I don’t know what the variables will be for such a script, I mean how will you tell Bacula that if it wrote on tape 0001 from slot one after the job is complete to move tape 0001 back to slot 1 and load tape 0004 from slot 2 or next available slot into the archive device automatically? Do any of you know what variables will be used i.e. run after job {mtx-changer /dev/sg1 unload $[originalslot] then mtx-changer /dev/sg1 load $[newslot] /dev/st0 0}? Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Troy Daniels Sent: 21 September, 2006 08:05 To: Michael Nelson Cc: bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Forcing use of next tape in Autochanger Michael Nelson wrote: I have a Quantum Superloader3 LTO-3 jukebox with one magazine (eight slots) and one drive. I have been backing our servers up to it successfully, after much tweaking. My problem is that I don't really want it to continue backing up to one tape until it's full. I am backing up about 100GB / night, and native capacity of an LTO-3 tape is 400GB, up to 800GB with compression. I am not comfortable having that many days worth of data on one tape and would like to be able to tell bacula to switch to the next tape. I believe I have found a way to do it manually, by using update volume in bconsole and changing that media_id's value from append to full, but I would rather this happen some way without my having to do that every day. If the answer to this is in the docs, I have missed it. Is there an easier way to handle this issue programmagically? Check out the Volume Use Duration option under: http://www.bacula.org/rel-manual/Configuring_Director.html#SECTION000141 Something like 'Volume Use Duration = 24h' should work if added to your Pools definition. Thanks Michael - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Autoloaders
We have a 2.6 Kernel and running RHEL 4, we installed the sg3 utils, ran the modprobe sg and everything, but there is no sg under /dev. If I run the hardware browser I can see the PV-124T as /dev/sg3 and the LTO device as /dev/sg2, the backplane as /dev/sg0 and the scsi adapter as /dev/sg1 but like I said nothing under /dev with sg. You know what I'm to re-install, we got the server pre-installed and people messed with the machine prior to me loading Bacula. Thanks for the help I appreciated it. Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Jaime Ventura [mailto:[EMAIL PROTECTED] Sent: 13 September, 2006 11:55 To: Janco van der Merwe Cc: Bacula Users Subject: Re: [Bacula-users] Autoloaders Did RHEL correctly detected you scsi board or did you changed the /etc/modprobe.conf? Which kernel version are you using? Jaime Ventura [Infra-estruturas e Comunicações] Rua Dr. António Bernardino de Almeida, 431 4200 - 072 Porto Telef: +351 22 834 05 00 (04) - ext. 1641 Fax: +351 22 832 11 59 e-mail: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] url:www.isep.ipp.pt http://www.isep.ipp.pt Janco van der Merwe wrote: According to the Hardware browser the PV-124T is located on /dev/sg3 but there is no sg3 under /dev..well there is no sg and when I try to access /dev/sg3 it just says no such device any ideas? When I ls /proc/scsi I get the following: aic79xx/ device_info scsi Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Jaime Ventura [mailto:[EMAIL PROTECTED] Sent: 12 September, 2006 16:58 To: Janco van der Merwe;Bacula Users Subject: Re: [Bacula-users] Autoloaders weird...:P do you have graphic interface? run the harware browser (hwbroswer on the command line) take a look on a screenshot I send as attachment. You should see you tape loader under the system devices. As you ca seen in the picture mine is on /dev/sg5. If doesn't work or if you don't have access to the harware browser let me see what you have on /proc/scsi (ls /proc/scsi ) Jaime Ventura [Infra-estruturas e Comunicações] Rua Dr. António Bernardino de Almeida, 431 4200 - 072 Porto Telef: +351 22 834 05 00 (04) - ext. 1641 Fax: +351 22 832 11 59 e-mail: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] url: www.isep.ipp.pt http://www.isep.ipp.pt Janco van der Merwe wrote: When I run the script the following error occurs: /dev/sg* cannot open SCSI device '/dev/sg*' - No such file or directory -- In the /proc/scsi/scsi : Host: scsi0 Channel: 00 Id: 08 Lun: 00 Vendor: DP Model: BACKPLANERev: 1.00 Type: EnclosureANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 5/i Rev: 1.00 Type: Direct-AccessANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 05 Lun: 00 Vendor: IBM Model: ULTRIUM-TD3 Rev: 5BG2 Type: Sequential-AccessANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 05 Lun: 01 Vendor: DELL Model: PV-124T Rev: 0031 Type: Medium Changer ANSI SCSI revision: 02 The board is a Adaptec 39160 Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Jaime Ventura [mailto:[EMAIL PROTECTED] Sent: 12 September, 2006 15:26 To: Janco van der Merwe;Bacula Users Subject: Re: [Bacula-users] Autoloaders First you need to be sure that you have the PV-124T correctly connected. I bought my PV-124T with a adaptec board scsi with it. First be sure that the board is recognized by linux. I didn't understand you message quite well. Does your cat /proc/scsi/scsi is something like this? Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: PE/PVModel: 1x2 SCSI BP Rev: 1.0 Type: ProcessorANSI SCSI revision: 02 Host: scsi0 Channel: 01 Id: 06 Lun: 00 Vendor: PE/PVModel: 1x4 SCSI BP Rev: 1.0 Type: ProcessorANSI SCSI revision: 02 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: MegaRAID Model: LD 0 RAID1 69G Rev: 521S Type: Direct-AccessANSI SCSI revision: 02 Host: scsi0 Channel: 02 Id: 01 Lun: 00 Vendor: MegaRAID Model: LD 1 RAID1 286G Rev: 521S Type: Direct-AccessANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 15 Lun: 00 Vendor: IBM Model: ULTRIUM-TD3 Rev: 5BG2 Type: Sequential-AccessANSI SCSI revision: 03 Host: scsi2 Channel: 00 Id: 15 Lun: 01 Vendor: DELL Model: PV-124T Rev
[Bacula-users] Autoloaders
Hi, Im going to ask a really dumb question now, so please bear with me. We just bought a Dell Power Vault 124 with a LTO 3 now the problem is that I dont know what device the autoloader is specified in /dev. I have a nst0, nst0a, nst0l, nst0m as well as st0, st0a, st0l and st0m. At least I know what the difference between nst0 and st0 is but I dont know which one of the rest is the autoloader ??? The best thing is I just got to grips with Bacula and the AIT and now I have to do everything over again but this time on RHEL 4 and the Dell Autoloader, at least Bacula is easy but the hardware through a curve ball. HELP??? Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Autoloaders
Shit..sorry, I missed that Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Kern Sibbald [mailto:[EMAIL PROTECTED] Sent: 12 September, 2006 14:22 To: bacula-users@lists.sourceforge.net Cc: Janco van der Merwe Subject: Re: [Bacula-users] Autoloaders On Tuesday 12 September 2006 14:16, Janco van der Merwe wrote: Hi, I'm going to ask a really dumb question now, so please bear with me. We just bought a Dell Power Vault 124 with a LTO 3 now the problem is that I don't know what device the autoloader is specified in /dev. I have a nst0, nst0a, nst0l, nst0m as well as st0, st0a, st0l and st0m. At least I know what the difference between nst0 and st0 is but I don't know which one of the rest is the autoloader ??? The best thing is I just got to grips with Bacula and the AIT and now I have to do everything over again but this time on RHEL 4 and the Dell Autoloader, at least Bacula is easy but the hardware through a curve ball. HELP??? Have you read the Autochanger chapter of the manual? It tells you how to figure it out by looking at /proc/... Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Autoloaders
According to the Hardware browser the PV-124T is located on /dev/sg3 but there is no sg3 under /dev..well there is no sg and when I try to access /dev/sg3 it just says no such device any ideas? When I ls /proc/scsi I get the following: aic79xx/ device_info scsi Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Jaime Ventura [mailto:[EMAIL PROTECTED] Sent: 12 September, 2006 16:58 To: Janco van der Merwe;Bacula Users Subject: Re: [Bacula-users] Autoloaders weird...:P do you have graphic interface? run the harware browser (hwbroswer on the command line) take a look on a screenshot I send as attachment. You should see you tape loader under the system devices. As you ca seen in the picture mine is on /dev/sg5. If doesn't work or if you don't have access to the harware browser let me see what you have on /proc/scsi (ls /proc/scsi ) Jaime Ventura [Infra-estruturas e Comunicações] Rua Dr. António Bernardino de Almeida, 431 4200 - 072 Porto Telef: +351 22 834 05 00 (04) - ext. 1641 Fax: +351 22 832 11 59 e-mail: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] url:www.isep.ipp.pt http://www.isep.ipp.pt Janco van der Merwe wrote: When I run the script the following error occurs: /dev/sg* cannot open SCSI device '/dev/sg*' - No such file or directory -- In the /proc/scsi/scsi : Host: scsi0 Channel: 00 Id: 08 Lun: 00 Vendor: DP Model: BACKPLANERev: 1.00 Type: EnclosureANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 5/i Rev: 1.00 Type: Direct-AccessANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 05 Lun: 00 Vendor: IBM Model: ULTRIUM-TD3 Rev: 5BG2 Type: Sequential-AccessANSI SCSI revision: 03 Host: scsi1 Channel: 00 Id: 05 Lun: 01 Vendor: DELL Model: PV-124T Rev: 0031 Type: Medium Changer ANSI SCSI revision: 02 The board is a Adaptec 39160 Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Jaime Ventura [mailto:[EMAIL PROTECTED] Sent: 12 September, 2006 15:26 To: Janco van der Merwe;Bacula Users Subject: Re: [Bacula-users] Autoloaders First you need to be sure that you have the PV-124T correctly connected. I bought my PV-124T with a adaptec board scsi with it. First be sure that the board is recognized by linux. I didn't understand you message quite well. Does your cat /proc/scsi/scsi is something like this? Attached devices: Host: scsi0 Channel: 00 Id: 06 Lun: 00 Vendor: PE/PVModel: 1x2 SCSI BP Rev: 1.0 Type: ProcessorANSI SCSI revision: 02 Host: scsi0 Channel: 01 Id: 06 Lun: 00 Vendor: PE/PVModel: 1x4 SCSI BP Rev: 1.0 Type: ProcessorANSI SCSI revision: 02 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: MegaRAID Model: LD 0 RAID1 69G Rev: 521S Type: Direct-AccessANSI SCSI revision: 02 Host: scsi0 Channel: 02 Id: 01 Lun: 00 Vendor: MegaRAID Model: LD 1 RAID1 286G Rev: 521S Type: Direct-AccessANSI SCSI revision: 02 Host: scsi2 Channel: 00 Id: 15 Lun: 00 Vendor: IBM Model: ULTRIUM-TD3 Rev: 5BG2 Type: Sequential-AccessANSI SCSI revision: 03 Host: scsi2 Channel: 00 Id: 15 Lun: 01 Vendor: DELL Model: PV-124T Rev: 0031 Type: Medium Changer ANSI SCSI revision: 02 Notice the 2 last scsi hosts. If you can get this, then your loader is correctly recognized. And If so, you can run the code i sent you on my previous message, in a bash console. If not, then probably the tapeloader isn't correctly recognized. What scsi board is your tapeloader connected to? Tell me what you got. Jaime Ventura [Infra-estruturas e Comunicações] Rua Dr. António Bernardino de Almeida, 431 4200 - 072 Porto Telef: +351 22 834 05 00 (04) - ext. 1641 Fax: +351 22 832 11 59 e-mail: [EMAIL PROTECTED] mailto:[EMAIL PROTECTED] url: www.isep.ipp.pt http://www.isep.ipp.pt Janco van der Merwe wrote: If I cat /proc/scsi/scsi the dell has an entry for the PV-124T but there is no /dev/sg* Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Jaime Ventura [mailto:[EMAIL PROTECTED] Sent: 12 September, 2006 14:36 To: Janco van der Merwe Cc: Bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Autoloaders Hi, Janco Try this: #!/bin/sh (for i in /dev/sg*; do echo $i; mtx -f $i inquiry 21; echo
Re: [Bacula-users] WOW
Yes but now you have to have a 3rd party app and requires subscription but Vodacom still has the e-mail to SMS but that is limited to 6 a day which will work but we are currently using the MTN network with our Zabbix which is on another machine and I hoped that there was a possibility that I could some how configure Bacula to use Zabbix which will solve this but I mean this is not a necessary thing just a nice to have, at least when jobs fail I have prior notice so that when my boss corners me I at least know and give him that all wonderful IT answer of I know and I'm busy working on it Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Alan Brown [mailto:[EMAIL PROTECTED] Sent: 11 September, 2006 11:42 To: Matt Cowger Cc: Janco van der Merwe;Bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] WOW On Sat, 9 Sep 2006, Matt Cowger wrote: My apologies - your email address was .co.za, so i assumed Zaire. .za = south africa Didn't realize your SMSs were so limited - indeed a script to attach to a GSM phone might be your best route, but I can't give you any guidance on that :(. Many years ago MTN networks used to run a email-SMS gateway (which promptly got overrun by spammers and switched to subscription mode about 1999-2000). Is that still going? AB This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
[Bacula-users] WOW
Hi, I've got a couple of questions but first I would like to say that Bacula is something incredible! We are currently backing up 6 servers and the total amount of data is 295GB and the best of all Bacula is writing all this data to an AIT 3 tape which can actually, I don't know a lot about tapes but usually the info given is correct, only take 260 GB compressed and when I saw the amount of data on the tape and Bacula did not ask for a second tape, I thought oh shit the data is damaged so I restored it and to my amazement it was perfectly fine! My question is, is it normal to take round about 13 hours to backup the data? What I mean isif you take each separate job and you compare it to the time that Ultrabac took you notice that Bacula takes 4 -5 times longer to backup the individual job.Any ideas why, DB maybe? My second question is, would it be possible to hook Bacula up to the monitoring package, Zabbix,to send out a sms/text message every time a job succeeds/fails or can Bacula do it if you hook it up to a GPRS modem? And then lastly,as you might come to realize my knowledge of backups is quite dangerous and I'm still learning. Can someone explain to me how did Bacula backup 295 GB to a tape that is suppose to take 260GB. 90% of the Servers are Windows Servers and very little data is text based so how in the hell did it do it without corrupting the Data??? To the developers.A JOB WELL DONE! This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] WOW
OH, I see, thank you for the speedy reply, just one thing I did not turn on the FD compression but you know what it isn't that much of a disater. I was curious and hell I haven't seen a backup solution like this before so I'm not complaining!Can you give me tip on how I will replace thebsmtp resource with my sms gateway, as far as I know there are return characters that should be read so that the modem doesn't keep on sending the same sms, how will Bacula read/interperet the return character, how will you set up Bacula to do thisso many questions so little time!!! From: Matt Cowger [mailto:[EMAIL PROTECTED]To: Janco van der Merwe [mailto:[EMAIL PROTECTED]Cc: Bacula-users@lists.sourceforge.netSent: Sat, 09 Sep 2006 23:11:59 +0200Subject: Re: [Bacula-users] WOW My question is, is it normal to take round about 13 hours to backup the data? What I mean is if you take each separate job and you compare it to the time that Ultrabac took you notice that Bacula takes 4 -5 times longer to backup the individual job. Any ideas why, DB maybe?This may depend on whether you are using compression on the FD's to transfer the data. On some of my machines, they are too slow to quickly compress the data, and turning on comrpession actually slows down my backups by nearly 3x. Just a thought. Perhaps UltraBac doesn't do comrpession on the client end? My second question is, would it be possible to hook Bacula up to the monitoring package, Zabbix, to send out a sms/text message every time a job succeeds/fails or can Bacula do it if you hook it up to a GPRS modem?Take a look at the call to bsmtp in the director config file. You could easily replace/supplement it with a call to your favorite SMS gateway And then lastly, as you might come to realize my knowledge of backups is quite dangerous and I'm still learning. Can someone explain to me how did Bacula backup 295 GB to a tape that is suppose to take 260GB. 90% of the Servers are Windows Servers and very little data is text based so how in the hell did it do it without corrupting the Data???The 260GB limit is based on compression, and assumes a 2.6:1 compression (AIT3 is 100GB native, 260GB compressed), but that estimate is just an AVERAGE. In your case, you got 2.95:1 (or more) - thats totally possible depending on your data. Its not just text data thats highly compressible - some types of email data, database data can also be highly compressible...--Matt This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] WOW
No need to apologize, a lot of South Africans recon that we are going the same route as our Norther African counterparts, well the white South Africans anyways. Thank you anyways for the tips I'll go do someresearch on the GSM issue but it is a nice thought. Bill Morgan, I like your signature! They say that some guy decided to write a virus and it was so successfull that they had to give a name so they called it Microsoft... and this coming from a MS guy who decided to try Linux and thus far loving it, just a thought. Well seeing as it is 00:00 in SA and my wife is already steaming, something to do with me being more affectionatetowardsmy PC, I'm going to bid thee a good night and may the grace from abovebless you all. From: Matt Cowger [mailto:[EMAIL PROTECTED]To: Janco van der Merwe [mailto:[EMAIL PROTECTED]Cc: Bacula-users@lists.sourceforge.netSent: Sat, 09 Sep 2006 23:46:19 +0200Subject: Re: [Bacula-users] WOWMy apologies - your email address was .co.za, so i assumed Zaire.Didn't realize your SMSs were so limited - indeed a script to attach to a GSM phone might be your best route, but I can't give you any guidance on that :(.--mattOn Sep 9, 2006, at 2:43 PM, Janco van der Merwe wrote: Fortunately I also don't know how the networks are in Zaire but in South Africa we are a little more advanced that our collegues up North, or so I'm told, something to do with our Apartheid Goverment building an excellent infrastruture which has gone to ruin with the new democratic thingie... but enough of politics. Unfortunately only SP, as far as I know, has that service but you only have limited sms's.5 in total if I'm not mistaken, that is why we have the GPRS modem linked to our Firewall which runs Zabbix and I though maybe I can utilize it but then I have to get another modem, so maybe it wasn't that good idea From: Matt Cowger [mailto:[EMAIL PROTECTED]] To: Janco van der Merwe [mailto:[EMAIL PROTECTED]] Cc: Bacula-users@lists.sourceforge.net Sent: Sat, 09 Sep 2006 23:33:43 +0200 Subject: Re: [Bacula-users] WOW Personally, I wouldn't send it directly through a modem if you can avoid it. I dont know how the networks are in Zaire, but in the US, most carriers offer a email- SMS gateway, so that you simply send an email to [EMAIL PROTECTED] or similar, and it becomes an SMS. If you can go that route, I'd definitly try. --matt On Sep 9, 2006, at 2:30 PM, Janco van der Merwe wrote: OH, I see, thank you for the speedy reply, just one thing I did not turn on the FD compression but you know what it isn't that much of a disater. I was curious and hell I haven't seen a backup solution like this before so I'm not complaining! Can you give me tip on how I will replace the bsmtp resource with my sms gateway, as far as I know there are return characters that should be read so that the modem doesn't keep on sending the same sms, how will Bacula read/interperet the return character, how will you set up Bacula to do thisso many questions so little time!!! From: Matt Cowger [mailto:[EMAIL PROTECTED]] To: Janco van der Merwe [mailto:[EMAIL PROTECTED]] Cc: Bacula-users@lists.sourceforge.net Sent: Sat, 09 Sep 2006 23:11:59 +0200 Subject: Re: [Bacula-users] WOW My question is, is it normal to take round about 13 hours to backup the data? What I mean is if you take each separate job and you compare it to the time that Ultrabac took you notice that Bacula takes 4 -5 times longer to backup the individual job. Any ideas why, DB maybe? This may depend on whether you are using compression on the FD's to transfer the data. On some of my machines, they are too slow to quickly compress the data, and turning on comrpession actually slows down my backups by nearly 3x. Just a thought. Perhaps UltraBac doesn't do comrpession on the client end? My second question is, would it be possible to hook Bacula up to the monitoring package, Zabbix, to send out a sms/text message every time a job succeeds/fails or can Bacula do it if you hook it up to a GPRS modem? Take a look at the call to bsmtp in the director config file. You could easily replace/supplement it with a call to your favorite SMS gateway And then lastly, as you might come to realize my knowledge of backups is quite dangerous and I'm still learning. Can someone explain to me how did Bacula backup 295 GB to a tape that is suppose to take 260GB. 90% of the Servers are Windows Servers and very little data is text based so how in the hell did it do it without corrupting the Data??? The 260GB limit is based on compression, and assumes a 2.6:1 compression (AIT3 is 100GB native, 260GB compressed), but that estimate is just an AVERAGE. In your case, you got 2.95:1 (or more) - thats totally possible depending on your data. Its not just text data thats highly compressible - some types of email data, database data can also be highly compressible... --Matt
Re: [Bacula-users] Fatal error in windows
I got the same error last night but mine was because of a bad AIT tape and it asked for the previous night's backup volume. Is yours the same? Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Arunav Mandal Sent: 07 September, 2006 10:35 To: Dominic Marks Cc: Bacula-users@lists.sourceforge.net Subject: Re: [Bacula-users] Fatal error in windows On Tuesday 05 September 2006 23:02, Arunav Mandal wrote: - Original Message - From: Arunav Mandal [EMAIL PROTECTED] To: Dominic Marks [EMAIL PROTECTED] Cc: Bacula-users@lists.sourceforge.net Sent: Tuesday, September 05, 2006 11:14 AM Subject: Re: [Bacula-users] Fatal error in windows On Tuesday 05 September 2006 10:59, Dominic Marks wrote: Arunav Mandal wrote: On Tuesday 05 September 2006 10:41, Dominic Marks wrote: Arunav Mandal wrote: In atleast 2 clients there is a fatal error. All the config is correct. Errors are given below. 05-Sep 00:48 bergen-fd: backup-bergen.2006-09-05_00.28.00 Fatal error: c: \cygwin\home\kern\bacula\k\src\win32\filed\../../filed/backup.c:500 Network send error to SD. ERR=Input/output error 05-Sep 00:48 bergen-fd: backup-bergen.2006-09-05_00.28.00 Error: c: \cygwin\home\kern\bacula\k\src\win32\lib\../../lib/bnet.c:426 Write error sending 65536 bytes to Storage daemon:sd.troll.no:9103: ERR=Input/output error 02-Sep 13:59 aeryn-fd: backup-aeryn.2006-09-02_13.54.11 Fatal error: c: \cygwin\home\kern\bacula\k\src\win32\filed\../../filed/backup.c:620 Network send error to SD. ERR=Input/output error 02-Sep 13:59 aeryn-fd: backup-aeryn.2006-09-02_13.54.11 Error: c: \cygwin\home\kern\bacula\k\src\win32\lib\../../lib/bnet.c:393 Write error sending len to Storage daemon:sd.troll.no:9103: ERR=Input/output error You are losing the network connection between the FD and SD. Is there a firewall of some sort in the way? If so you might have to specify a Heartbeat Interval to preserve to connection. Try running with a higher level of debugging? Maybe FD Connect Timeout = 5 is too less? There is no firewall but the machine can be slow as lot of processes are there. How to specify Heartbeat Interval and how to run with higher level of debugging? Quite possibly on a busy machine. Google for the last two, well documented. It failed after it started spooling data. Then something else is wrong. I tried reinstalling a number of times no luck. Thanks, Dominic Thanks, Dominic Arunav. Arunav It is still giving errors any ideas why? Arunav. This happens only with some XP machines and here is the output from the spool directory on the SD. Arunav. This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Configuration error
Kern, Okay I see your point, I'm sorry, the day just started @#$!@ and your e-mail was not what I really expected and it was the last straw, in a way of speaking. Please remember that coming from a MS background I found it quite difficult to do things the right way and I missed the quotation marks in the manual, yes it was my fault no need to rub it in at this point, but it was a valuable lesson. I never intended to discourage you or to be judgmental but like I said I just needed someone to smack me in the right direction which you did, I know that now, but all that I'm trying to say is sorry and thank you and please remember that there are a lot of other idiots like me out there so patience is a virtue if not you can always go visit your local Bar or gunshop (: Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Kern Sibbald [mailto:[EMAIL PROTECTED] Sent: 29 August, 2006 09:27 To: Janco van der Merwe Cc: bacula-users@lists.sourceforge.net Subject: Re: Configuration error Hello, On Tuesday 29 August 2006 07:32, Janco van der Merwe wrote: You know what Kern, instead of looking down at a person all that you could have done was just point out what I did wrong and fixing 1, only 1, to give me an example, that is all that I need is someone just to get me on the right path so that I can get this working. I have no problem admitting when I am wrong, and like every one I sometimes inadvertantly say something in a incorrect way. In this case, I can tell you that I didn't look down on anyone, and I see no reason to apologize for what I wrote. I don't normally answer such questions in the first place, and your email is the kind of response that discourages and demotivates Open Source developers. Just because my answer is short and to the point (the FileSet filenames *are* messed up) doesn't mean that I am attacking or criticising the person who wrote them. Remember not everyone is as magnificent as you are and sometimes it won't cost you a thing just to help a person out just by giving him practical examples on the config file he sent you so that he will actually see what he is doing wrong. It seems to me that you are the one doing the judging here, rather sarcastic, and treating me like a servant. You are complaining because I pointed you to the problem, and and also complaining because I didn't spend spend ten or fifteen more minutes correcting your errors. But in any case thank you for the reply I'll go through the manual again. Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Kern Sibbald [mailto:[EMAIL PROTECTED] Sent: 28 August, 2006 20:45 To: Janco van der Merwe Cc: bacula-users@lists.sourceforge.net;[EMAIL PROTECTED];[EMAIL PROTECTED] Subject: Re: Configuration error Your use of quotes and forward slashes in your FileSets is all messed up. Please see the manual. On Monday 28 August 2006 19:21, Janco van der Merwe wrote: I wonder if one of you can help me? When I add a second client to the dir.conf I receive a 28-Aug 18:58 bacula-dir: ERROR TERMINATION at inc_conf.c:330 Config error: Keyword Catalog not permitted in this resource : line 341, col 8 of file /etc/bacula/bacula-dir.conf Catalog { This only happens when I add the second client. I've check all closing braces and they are all where they should be. When I comment the FileSet directive out it moans about other things but as soon as uncomment the the above mentioned I get the same error. I have gone throught the FileSet with a hawk's eye but can't find anything. The strange thing is as soon as I move the client up the client works but then the original specified client gives the error (I hope that I'm making sense). I have attached a text format of my config file if someone wants to have a look at it. P.S where Ceaser is the culprit Please any help will be appreciated Oh I'm running FC4 with Bacula v 1.38 Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein
Re: [Bacula-users] Configuration error
Absolutely, just say when! Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Kern Sibbald [mailto:[EMAIL PROTECTED] Sent: 29 August, 2006 11:25 To: Janco van der Merwe Cc: bacula-users@lists.sourceforge.net Subject: Re: Configuration error Hello, On Tuesday 29 August 2006 09:59, Janco van der Merwe wrote: Kern, Okay I see your point, I'm sorry, the day just started @#$!@ and your e-mail was not what I really expected and it was the last straw, in a way of speaking. Please remember that coming from a MS background I found it quite difficult to do things the right way and I missed the quotation marks in the manual, yes it was my fault no need to rub it in at this point, but it was a valuable lesson. I never intended to discourage you or to be judgmental but like I said I just needed someone to smack me in the right direction which you did, I know that now, but all that I'm trying to say is sorry and thank you and please remember that there are a lot of other idiots like me out there so patience is a virtue if not you can always go visit your local Bar or gunshop (: OK, thanks. I appreciate this email and the attitude you have taken. Everyone (including me I hope) is entitled to a bad moment or two. By the way, I don't consider any Bacula user an idiot, even if they have a few problems. If I ever visit South Africa, we can go to your local bar (no gunshops for me) and and exchange offering each other a drink ... :-) Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Kern Sibbald [mailto:[EMAIL PROTECTED] Sent: 29 August, 2006 09:27 To: Janco van der Merwe Cc: bacula-users@lists.sourceforge.net Subject: Re: Configuration error Hello, On Tuesday 29 August 2006 07:32, Janco van der Merwe wrote: You know what Kern, instead of looking down at a person all that you could have done was just point out what I did wrong and fixing 1, only 1, to give me an example, that is all that I need is someone just to get me on the right path so that I can get this working. I have no problem admitting when I am wrong, and like every one I sometimes inadvertantly say something in a incorrect way. In this case, I can tell you that I didn't look down on anyone, and I see no reason to apologize for what I wrote. I don't normally answer such questions in the first place, and your email is the kind of response that discourages and demotivates Open Source developers. Just because my answer is short and to the point (the FileSet filenames *are* messed up) doesn't mean that I am attacking or criticising the person who wrote them. Remember not everyone is as magnificent as you are and sometimes it won't cost you a thing just to help a person out just by giving him practical examples on the config file he sent you so that he will actually see what he is doing wrong. It seems to me that you are the one doing the judging here, rather sarcastic, and treating me like a servant. You are complaining because I pointed you to the problem, and and also complaining because I didn't spend spend ten or fifteen more minutes correcting your errors. But in any case thank you for the reply I'll go through the manual again. Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Kern Sibbald [mailto:[EMAIL PROTECTED] Sent: 28 August, 2006 20:45 To: Janco van der Merwe Cc: bacula-users@lists.sourceforge.net;[EMAIL PROTECTED];[EMAIL PROTECTED] Subject: Re: Configuration error Your use of quotes and forward slashes in your FileSets is all messed up. Please see the manual. On Monday 28 August 2006 19:21, Janco van der Merwe wrote: I wonder if one of you can help me? When I add a second client to the dir.conf I receive a 28-Aug 18:58 bacula-dir: ERROR TERMINATION at inc_conf.c:330 Config error: Keyword Catalog not permitted in this resource : line 341, col 8 of file /etc/bacula/bacula-dir.conf Catalog { This only happens when I add the second client. I've check all closing braces and they are all where they should be. When I comment the FileSet directive out it moans about other things but as soon as uncomment the the above mentioned I get the same error. I have gone throught the FileSet with a hawk's eye but can't find anything. The strange thing is as soon as I move the client up the client works but then the original specified client gives the error (I hope that I'm making sense). I have attached a text format of my config file if someone wants to have a look at it. P.S where Ceaser
[Bacula-users] Configuration error
I wonder if one of you can help me? When I add a second client to the dir.conf I receive a 28-Aug 18:58 bacula-dir: ERROR TERMINATION at inc_conf.c:330 Config error: Keyword Catalog not permitted in this resource : line 341, col 8 of file /etc/bacula/bacula-dir.conf Catalog { This only happens when I add the second client. Ive check all closing braces and they are all where they should be. When I comment the FileSet directive out it moans about other things but as soon as uncomment the the above mentioned I get the same error. I have gone throught the FileSet with a hawks eye but cant find anything. The strange thing is as soon as I move the client up the client works but then the original specified client gives the error (I hope that Im making sense). I have attached a text format of my config file if someone wants to have a look at it. P.S where Ceaser is the culprit Please any help will be appreciated Oh Im running FC4 with Bacula v 1.38 Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. # # Default Bacula Director Configuration file # # The only thing that MUST be changed is to add one or more # file or directory names in the Include directive of the # FileSet resource. # # For Bacula release 1.38.11 (28 June 2006) -- redhat (Stentz) # # You might also want to change the default email address # from root to your address. See the mail and operator # directives in the Messages resource. # Director {# define myself Name = dunnsbac-dir DIRport = 9101# where we listen for UA connections QueryFile = /etc/bacula/query.sql WorkingDirectory = /var/bacula PidDirectory = /var/run Maximum Concurrent Jobs = 20 Password = director # Console password Messages = Daemon } JobDefs { Name = DefaultJob Type = Backup Level = Incremental Client = dunnsbac-fd FileSet = Full Set Schedule = WeeklyCycle Storage = File Messages = Standard Pool = Default Priority = 10 } JobDefs { Name = MIS02 Daily Type = Backup Level = Full Client = mis02-fd FileSet = MIS02_Daily Schedule = Daily Storage = AIT Messages = Standard Pool = Daily Priority = 1 } JobDefs { Name = MIS02 Weekly Type = Backup Level = Full Client = mis02-fd FileSet = MIS02_Weekly Schedule = Weekly Storage = AIT Messages = Standard Pool = Weekly Priority = 2 } JobDefs { Name = Ceaser Type = Backup Level = Full Client = ceaser-fd FileSet = Ceaser Schedule = Daily Storage = AIT Messages = Standard Pool = Daily Priority = 3 } # # Define the main nightly save backup job # By default, this job will back up to disk in /tmp Job { Name = Client1 JobDefs = DefaultJob Write Bootstrap = /var/bacula/Client1.bsr } Job { Name = MIS02Daily Client = mis02-fd JobDefs = MIS02 Daily Write Bootstrap = /var/bacula/mis02.bsr } Job { Name = MIS02Weekly JobDefs = MIS02 Weekly Write Bootstrap = /var/bacula/mis02weekly.bsr } Job { Name = Ceaser JobDefs = Ceaser Write Bootstrap = /var/bacula/ceaser.bsr } #Job { # Name = Client2 # Client = dunnsbac2-fd # JobDefs = DefaultJob # Write Bootstrap = /var/bacula/Client2.bsr #} # Backup the catalog database (after the nightly save) Job { Name = BackupCatalog JobDefs = DefaultJob Level = Full FileSet=Catalog Schedule = WeeklyCycleAfterBackup # This creates an ASCII copy of the catalog RunBeforeJob = /etc/bacula/make_catalog_backup bacula bacula # This deletes the copy of the catalog RunAfterJob = /etc/bacula/delete_catalog_backup Write Bootstrap = /var/bacula/BackupCatalog.bsr Priority = 11 # run after main backup } # # Standard Restore template, to be changed by Console program # Only one such job is needed for all Jobs/Clients/Storage ... # Job { Name = RestoreFiles Type = Restore Client=dunnsbac-fd FileSet=Full Set Storage = File Pool = Default Messages = Standard Where = /tmp/bacula-restores } # List of files to be backed up FileSet { Name = Full Set Include { Options { signature =
Re: [Bacula-users] Configuration error
You know what Kern, instead of looking down at a person all that you could have done was just point out what I did wrong and fixing 1, only 1, to give me an example, that is all that I need is someone just to get me on the right path so that I can get this working. Remember not everyone is as magnificent as you are and sometimes it won't cost you a thing just to help a person out just by giving him practical examples on the config file he sent you so that he will actually see what he is doing wrong. But in any case thank you for the reply I'll go through the manual again. Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 -Original Message- From: Kern Sibbald [mailto:[EMAIL PROTECTED] Sent: 28 August, 2006 20:45 To: Janco van der Merwe Cc: bacula-users@lists.sourceforge.net;[EMAIL PROTECTED];[EMAIL PROTECTED] Subject: Re: Configuration error Your use of quotes and forward slashes in your FileSets is all messed up. Please see the manual. On Monday 28 August 2006 19:21, Janco van der Merwe wrote: I wonder if one of you can help me? When I add a second client to the dir.conf I receive a 28-Aug 18:58 bacula-dir: ERROR TERMINATION at inc_conf.c:330 Config error: Keyword Catalog not permitted in this resource : line 341, col 8 of file /etc/bacula/bacula-dir.conf Catalog { This only happens when I add the second client. I've check all closing braces and they are all where they should be. When I comment the FileSet directive out it moans about other things but as soon as uncomment the the above mentioned I get the same error. I have gone throught the FileSet with a hawk's eye but can't find anything. The strange thing is as soon as I move the client up the client works but then the original specified client gives the error (I hope that I'm making sense). I have attached a text format of my config file if someone wants to have a look at it. P.S where Ceaser is the culprit Please any help will be appreciated Oh I'm running FC4 with Bacula v 1.38 Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Using Tomcat but need to do more? Need to support web services, security? Get stuff done quickly with pre-integrated technology to make your job easier Download IBM WebSphere Application Server v.1.0.1 based on Apache Geronimo http://sel.as-us.falkag.net/sel?cmd=lnkkid=120709bid=263057dat=121642 ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users
Re: [Bacula-users] Help
Hi Kern, Sorry for the inconvenience but the manual only tells what to do from the source and not if you download a rpm, but I went and downloaded the source and chanana how's your mother or should I say bob's your uncle and suzie is your auntie it worked. I had some problems with the configure but only to realize that it was my stupidity, let's keep that between us, but ja after that was done most of my questions were answered. Thanx anyway for the reply Janco v.d Merwe Network Administrator Dunns Stores (PTY) Ltd Switchboard: 011 541 3000 Direct: 011 541 3007 Fax: 086 632 1708 This communication and any attachments are confidential and intended for the sole use of the intended recipient. Any form of copying or disclosure of this communication to any third parties without permission is prohibited. The contents of this communication and its attachments are not intended to be relied upon in law without subsequent written confirmation. As such, Dunns Stores (Pty) Ltd accept no responsibility or liability (including negligence) for the consequences of anyone acting, or not acting, on information contained therein. If you have received this communication in error please notify us immediately and destroy or delete it. - Take Surveys. Earn Cash. Influence the Future of IT Join SourceForge.net's Techsay panel and you'll get the chance to share your opinions on IT business topics through brief surveys -- and earn cash http://www.techsay.com/default.php?page=join.phpp=sourceforgeCID=DEVDEV ___ Bacula-users mailing list Bacula-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/bacula-users