Hello,
I am using Beagle bone Black Rev C with 7.11 image and I have connected the
device to LCD monitor using micro HDMI to HDMI cable. Before it was working
fine but suddenly it started showing blank screen.
I tried various steps:
1) reflashed the device
2) parse-edid edid to check about
>
> Hello,
>
>
I am Ashwin. I am using BeagleBone black with 7.11 wheezy image. Earlier I
was using it by connecting to LCD monitor it was working before but
suddenly it started to show blank screen. I have been following this
thread since then and I have followed almost all the steps in
>
> Hello Gerald,
>
I am Ashwin. I am using Beaglebone Black with 7.11 wheezy image with LCD
monitor. Previously it was working fine.but suddenly it started to show
blank screen. I have been following the thread about the HDMI issue in BBB
closely and followed almost all the steps suggested
I reinstalled preinstalled image to BBB (debian) . Now it is displaying on
LCD screen with 1080@60.
Thank you.
--
For more options, visit http://beagleboard.org/discuss
---
You received this message because you are subscribed to the Google Groups
BeagleBoard group.
To unsubscribe from this
On Mon, Mar 16, 2015 at 4:52 AM, Upol Ryskulova upo...@gmail.com wrote:
Hello Robert,
I have checked my u-boot version. On working two BBB boards u-boot version
is U-Boot 2014.04-00015-gb4422bd. On problematic BBB board it is U-Boot
2013.10-00016-ga0e6bc6.
Do I need to upgrade my u-boot to
Actually I am working on three BBB boards, and they have preinstalled linux
3.8.13-bone70. Two of them are happy with our LCD screen(I do not why
though, yes I had checked the link you send me Robert. I guess really it is
exceptional case displaying on 1080@60 [smile] ). On one board I am
Actually we have three BBB boards, and two of them are perfectly displaying
on our LCD screen with 1080@60 (I do not know why though, I have looked the
lin http://elinux.org/Beagleboard:BeagleBoneBlack_HDMIk that you send me
Robert). All BBBs came with preinstalled linux 3.8.13-bone-70. On one
Hello Robert,
I have checked my u-boot version. On working two BBB boards u-boot version
is U-Boot 2014.04-00015-gb4422bd. On problematic BBB board it is U-Boot
2013.10-00016-ga0e6bc6.
Do I need to upgrade my u-boot to the 2014.04-00015 version?
Thank you in advance.
Regards,
Upol
--
For more
Yes, exactly the same software on both BBB.
2015-03-15 1:11 GMT+00:00 Gerald Coley ger...@beagleboard.org:
So you have one board that works and another that does not work with the
same exact software?
Gerald
On Sat, Mar 14, 2015 at 11:43 AM, Upol Ryskulova upo...@gmail.com wrote:
Hello
Hello Gerald Robert,
Actually I am working with three BBB boards, two of them are ok with LCD
display I am using. They all have preinstalled linux 3.8.13-bone70. I had
checked the link you send me Robert. (I guess it is really exceptional case
that BBBs displaying on 1080@60 lcd screen). On
On Mar 14, 2015 11:43 AM, Upol Ryskulova upo...@gmail.com wrote:
Hello Gerald,
I faced with the same problem as Glenn
I appear to be getting is that during the initial boot, I get the
BeagleBone logo appear in the top left of the screen. This also changes
size depending on what resolution I
So you have one board that works and another that does not work with the
same exact software?
Gerald
On Sat, Mar 14, 2015 at 11:43 AM, Upol Ryskulova upo...@gmail.com wrote:
Hello Gerald,
I faced with the same problem as Glenn
I appear to be getting is that during the initial boot, I get the
On Mar 14, 2015 11:43 AM, Upol Ryskulova upo...@gmail.com wrote:
Hello Gerald,
I faced with the same problem as Glenn
I appear to be getting is that during the initial boot, I get the
BeagleBone logo appear in the top left of the screen. This also changes
size depending on what resolution I
Hello Gerald,
I faced with the same problem as Glenn
I appear to be getting is that during the initial boot, I get the
BeagleBone logo appear in the top left of the screen. This also changes
size depending on what resolution I set in uEnv.txt .After this image
disappears and a little more time
Hi Gerald! I have the same problem as the people on here. Did an MMC
reflash to latest software and thought maybe it is a faulty HDMI cable. I
have since received a dragon board with the same micro hdmi connector as
the beaglebone. Dragonboard HDMI works fine, BeagleBone does not.
Any ideas?
I assume you followed all the instructions on the Wiki, so I guess the
board is bad. I would to an RMA request.
Gerald
On Sat, Dec 28, 2013 at 10:57 AM, aehr...@gmail.com wrote:
Hi Gerald! I have the same problem as the people on here. Did an MMC
reflash to latest software and thought maybe
Gerald,
I am having the same problems as described above.
The one difference I appear to be getting is that during the initial boot,
I get the BeagleBone logo appear in the top left of the screen. This also
changes size depending on what resolution I set in uEnv.txt
After this image
Then your cable and board is fine. Make sure you have the latest SW.
http://circuitco.com/support/index.php?title=Updating_The_Software
And check http://circuitco.com/support/index.php?title=BeagleBoneBlack_HDMI
Gerald
On Tue, Oct 22, 2013 at 6:48 AM, glennben...@gmail.com wrote:
Gerald,
I've confirmed the cable isn't bad. I plugged the cable into my Sony
Ericsson Xperia Neo, there is output on my HDMI monitor. But nothing
happens when connected to BBB.
I know there are different versions for the HDMI spec. Do you mean I have
to use the cable that supports newer version?
I've confirmed the cable isn't good. I plugged the cable into my Sony
Ericsson Xperia Neo, there is output on my HDMI monitor. But nothing
happens when connected to BBB.
I know there are different versions for the HDMI spec. Do you mean I have
to use the cable that supports newer version?
OK. I would look at the cable. We have had several instances of people with
bad HDMI cables.
Gerald
On Mon, Sep 30, 2013 at 8:57 AM, Chien-Yu Chen honer...@gmail.com wrote:
I've updated BBB using the newest firmware,
BBB-eMMC-flasher-2013.09.15.img.
Still have the same problem.
On
I met similar issue as well. My monitor is ASUS LS221H which can correctly
display outputted from my mobile phone Xperia Neo V via HDMI. From here, we
can confirm the monitor and the cable both function well. After powering
up, sometimes I could see the logo from BeagleBone Black. Then, what I
Could be this the reason why I can have a perfectly working
non-accelerated-android working on my BBB (followed
http://icculus.org/~hendersa/android/, with Robert Nelson's 3.8 kernel),
while follwing these instructions
It does not. It was too complicated for them to do as I understand it. I
think the EDID was a little overwhelming.
Gerald
On Thu, Sep 26, 2013 at 2:15 PM, Tomas Espeleta tomas.espel...@gmail.comwrote:
Yeah.. it's a bit confusing: their page actually makes you think they do
have support for
24 matches
Mail list logo
