[beagleboard] Re: HDMI not working in new BeagleboardX15

Hi, My BB-X15 which arrived just prior to Harvey boots into some form of X windows from the internal eMMC image and the beagleboard.org desktop is displayed on my TV via HDMI. I haven't yet updated the internal eMMC image as I'm running mainly from uSD cards.. My BB-X15 default eMMC image

[beagleboard] Re: can't install ubuntu..

maybe 2. push not boot S/W My BBB push not boot S/W and update ubuntu. 2018년 1월 29일 월요일 오후 7시 45분 2초 UTC+9, ush...@gmail.com 님의 말: > > hi > i got BBB rev.C > > i tried install ubuntu, but it failed.. > > i installed at this step. > 1. input uSD card(ubuntu) > 2. pushed boot S/W and input

Re: [beagleboard] Re: Beaglebone Blue crashes furing updates/downloads and subsequent root file system failures

If you cannot do a complete reboot and remove the OS and GPIO isetup, can you return the unit to the place you bought it from, and let them figure it out. On Thu, Jan 25, 2018 at 11:37 AM, wrote: > Could it be the on board battery is retaining the GPio confirguration from

[beagleboard] ADXL345 device support in U-Boot for Beaglebone black

Need Complete steps for U-Boot a) steps to pull U-boot and patch for Beagle Bone black b) Steps to compile c) Steps to prepare SD Card and load image to Beagle Bone Black. d) Steps to add device tree configuration for ADXL345 device. Could someone please help me out of these

Re: [beagleboard] Re: Error using connmanctl> enable wifi BBBW

Ok should've guessed that, it works now. Thanks for the help Robert! Burak On Mon, Jan 29, 2018 at 8:43 PM, Robert Nelson wrote: > On Mon, Jan 29, 2018 at 11:40 AM, BURAK SONER wrote: > > Hi Robert, > > > > I've grounded TP1 (something like a via I

Re: [beagleboard] Re: Error using connmanctl> enable wifi BBBW

Hi Robert, I've grounded TP1 (something like a via I suppose so I stuck a jumper in and connected the other end to P9-1). I checked with a thin tip multimeter touching the golden part of the via (not the jumper) and verified they're connected. I logged in as root and entered the following

[beagleboard] Re: Will I hit any issues going from Debian 7 (wheezy) to 9 (stretch)?

Robert Nelson wrote: > On Mon, Jan 29, 2018 at 10:31 AM, Chris Green wrote: > > I have a fairly old (just coming up to 4 years) BBB running Debian 7 > > which I have kept up to date with security fixes etc. > > > > It's used to monitor various things on my

Re: [beagleboard] Re: Error using connmanctl> enable wifi BBBW

On Mon, Jan 29, 2018 at 11:40 AM, BURAK SONER wrote: > Hi Robert, > > I've grounded TP1 (something like a via I suppose so I stuck a jumper in and > connected the other end to P9-1). I checked with a thin tip multimeter > touching the golden part of the via (not the jumper)

Re: [beagleboard] Will I hit any issues going from Debian 7 (wheezy) to 9 (stretch)?

On Mon, Jan 29, 2018 at 10:31 AM, Chris Green wrote: > I have a fairly old (just coming up to 4 years) BBB running Debian 7 > which I have kept up to date with security fixes etc. > > It's used to monitor various things on my boat and runs headless with > remote ssh access to

[beagleboard] Will I hit any issues going from Debian 7 (wheezy) to 9 (stretch)?

I have a fairly old (just coming up to 4 years) BBB running Debian 7 which I have kept up to date with security fixes etc. It's used to monitor various things on my boat and runs headless with remote ssh access to manage it. Just about all of the monitoring code is written in Python and lives in

Re: [beagleboard] Re: Error using connmanctl> enable wifi BBBW

On Mon, Jan 29, 2018 at 12:24 AM, BURAK SONER wrote: > Hi Robert, > > Thanks for the quick answer! Here's the output: > > git:/opt/scripts/:[2ce750d881941c5189db9e189af90517e11c079f] > eeprom:[A335BNLT*] Another case of eeprom mis-programmed: GND TP1 then run as root: dd

[beagleboard] Re: HDMI not working in new BeagleboardX15

Hi, I have a BB-X15 at home still with the default image (kernel 4.9.??) on the eMMC. Regrettably, I've never tried running X on it (not even remote desktop). I will test it tonight by plugging an HDMI cable into it.. I HAVE plugged an HDMI cable into our 572xEVM/BB-X15 at work a few

[beagleboard] BB-Blue and stepper motor

Hi It is possible with this version beaglebone-blue to control motor stepper driver like leadshine dm556 in place of servo ? (i can try some hw mod if needed) Also for this use, machinekit can work with this board ? Best regards. -- For more options, visit http://beagleboard.org/discuss

[beagleboard] HDMI not working in new BeagleboardX15

Hi, I just purchased a new BBX15 from mouser and connected to the suggested 12v 5a power adaptor. On switching the power button, I don't see any activity in the monitor connected through the HDMI port of BBX15. Does the new board come default with debian OS booting from eMMC? -- For more

[beagleboard] can't install ubuntu..

hi i got BBB rev.C i tried install ubuntu, but it failed.. i installed at this step. 1. input uSD card(ubuntu) 2. pushed boot S/W and input power 3. wating install 4. 4LED on 5. remove power and uSD card 6. input power at reboot BBB's OS is not ubuntu. still Ångström.. why not installed

[beagleboard] BBB ubuntu install fail

hi, I got BBB and tried install ubuntu. input uSD card(installed ubuntu) push boot button and input 5v power. bbb is working well. and install finished with LED1~4 on. and remove 5V and uSD card input 5v power. but BBB is not installed ubuntu still Ångström... why still installed

Re: [beagleboard] Re: Error using connmanctl> enable wifi BBBW

Hi Robert, Thanks for the quick answer! Here's the output: git:/opt/scripts/:[2ce750d881941c5189db9e189af90517e11c079f] eeprom:[A335BNLT*] dogtag:[BeagleBoard.org Debian Image 2017-08-31] bootloader:[eMMC-(default)]:[/dev/mmcblk1]:[U-Boot 2017.09-rc2-2-g7c9353] kernel:[4.9.45-ti-r57]