Re: [beagleboard] Reload a new PRU program in the PRU using pruss_remoteproc

D=1=AFQjCNHA4ztlFX21uInjI9Ir1q1TXIYRVA> > > > > Unfortunately, Pantelis never responded so I have no idea how to fix this > issue. > > Regards, > John > > > > > On Feb 8, 2016, at 1:04 PM, Jelle Spijker <spijke...@gmail.com > &

[beagleboard] Reload a new PRU program in the PRU using pruss_remoteproc

Hello all, first post hoping you can help me. I have finally got my PRU working on my BBB Debian 4.1.17-ti-rt-r46. I used the PRU_gpioToggle example from https://git.ti.com/pru-software-support-package/pru-software-support-package/trees/master/examples/am335x/PRU_gpioToggle which I compiled

[beagleboard] BBB gets stuck during bootup @ i2c i2c-2: SCL is stuck low, exit recovery

Quite often my BBB gets stuck during bootup. Allways at "i2c i2c-2: SCL is stuck low, exit recovery" When I reset a couple of times it boots up okay. My BBB runs from an SD card with Debian 4.1.17-ti-rt-r46. U-Boot SPL 2015.07-rc3-1-g2c9c20a (Jun 30 2015 - 09:02:07) > > >> >> U-Boot

Re: [beagleboard] Installing ARch Linux on BBB rev C. can't find boot/zImage

William Hermans: > > Is that mount on partition 2 ? > > On Wed, Jul 13, 2016 at 1:35 PM, Jelle Spijker <spijke...@gmail.com > > wrote: > >> drwxr-xr-x 2 root root 4.0K Jul 1 03:57 dtbs >> -rw-r--r-- 1 root root 74K Jun 8 2015 MLO >> -rw-r--r-- 1 root

Re: [beagleboard] Installing ARch Linux on BBB rev C. can't find boot/zImage

William Hermans: > > So . . . put sdcard into another Linux machine. Then . . . > > sudo mount /dev/sdxx /media/rootfs > ls /media/rootfs/boot > > What output do you get ? > > On Wed, Jul 13, 2016 at 1:16 PM, Jelle Spijker <spijke...@gmail.com > > wrote: > >

[beagleboard] Installing ARch Linux on BBB rev C. can't find boot/zImage

Hello, I'm trying to install Arch on my BBB rev C. using the described method on https://archlinuxarm.org/platforms/armv7/ti/beaglebone-black but it can't find my zImage, whilst it is present in the boot folder. It hangs while the two outer LEDS are on with the following message. I also

Re: [beagleboard] Installing ARch Linux on BBB rev C. can't find boot/zImage

setenv mmc0 0;fi;if run loaduimage; then >>>>> run loadfdt;run mmcboot;fi; >>>>> *mmcroot=/dev/mmcblk0p2* rw >>>>> *loadfdt=ext4load mmc ${mmcdev}:2 ${fdtaddr} /boot/dtbs/${fdtfile}* >>>>> l*oaduimage=if ext4load mmc 0:2 ${loadaddr} /boot/zImage; th

Re: [beagleboard] Installing ARch Linux on BBB rev C. can't find boot/zImage

= 1.43: mkfs.ext4 -O ^metadata_csum,^64bit /dev/sdX1 by executing: mkfs.ext4 -O ^metadata_csum,^64bit /dev/sdX1 I now got Arch linux up and running. I wanted to thank you for your quick response. best regards, Jelle Op donderdag 14 juli 2016 09:48:37 UTC+2 schreef Jelle Spijker: > > Dam

[beagleboard] gdbserver shared library PRU loader

Hi All, I'm running Arch Linux on my BBB, so no remoteproc for me :-( when working with the PRU. In my setup I'm developing a shared library that loads a simple PRU program via a unittest to verify if it works. Because I work with prussdrv the program should be run with sudo. If that it is

[beagleboard] Re: gdbserver shared library PRU loader

issue: > > Am Mittwoch, 12. Oktober 2016 15:05:12 UTC+2 schrieb Jelle Spijker: >> >> Fragment of the Shared library: >> >> void BBB::loadPRUfirmware(const unsigned int , const std::string >> ) { >> //Initialize structure used by prussdrv_pruintc_intc &

[beagleboard] Re: gdbserver shared library PRU loader

t; PRU_DMEM_0_1, PAGE 1 } It generates an SonarArray.out see attachment. Op donderdag 13 oktober 2016 09:45:27 UTC+2 schreef TJF: > > > > Am Donnerstag, 13. Oktober 2016 09:16:31 UTC+2 schrieb Jelle Spijker: >> >> When I run the test as a normal user and output the re

[beagleboard] Re: BBB gets stuck during bootup @ i2c i2c-2: SCL is stuck low, exit recovery

Hi Ison, Unfortunately no. I switched to an Arch Linux image, which ran without problems. Best regards, Jelle -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this