[beagleboard] Re: Cannot SSH to BBB anymore

and that seems to work fine but I am unsure how to access the eMMC to retrieve files before re-imaging. Is there a process making that possible? Thanks in advance On Thursday, May 17, 2018 at 12:52:38 PM UTC+12, yassyass wrote: > > Hi guys, > > Not sure what's happened and not sure wh

[beagleboard] Re: Cannot SSH to BBB anymore

keyboard directly off it to see what the matter is. Will report back with results once I find a mini HDMI cable... On Thursday, May 17, 2018 at 8:03:27 PM UTC+12, Chris Green wrote: > > yassyass <yasir...@gmail.com > wrote: > > Hi guys, > > > > Not sure what's happen

[beagleboard] Cannot SSH to BBB anymore

Hi guys, Not sure what's happened and not sure where to start troubleshooting. My BBB won't respond to SSH requests from Terminal on my mac, this was working perfectly fine just days ago and I am trying to go back and understand what changed. I worked mostly using Cloud9 and running scripts

Re: [beagleboard] Re: I2C SCL Voltage level too low?

Thank you John, It seems like my scope was loading it quite a bit and is now giving much better readings using x10 probes. The signals bellow are set to 400 kHz using 1kOhm pull-ups

[beagleboard] Re: I2C SCL Voltage level too low?

With the 1k resistors improvement is evident in terms of voltage level for the high signal. However the rise time still seems to be slow and I2C device is still

Re: [beagleboard] I2C SCL Voltage level too low?

t; > > > > > On Apr 4, 2018, at 10:06 PM, yassyass <yasir...@gmail.com > > wrote: > > Thanks Wulf, I will attempt to increase the resistor values and get back > with results. > > > -- > For more options, visit http://beagleboard.org/discuss > ---

Re: [beagleboard] I2C SCL Voltage level too low?

Thanks Wulf, I will attempt to increase the resistor values and get back with results. -- For more options, visit http://beagleboard.org/discuss --- You received this message because you are subscribed to the Google Groups "BeagleBoard" group. To unsubscribe from this group and stop receiving

[beagleboard] I2C SCL Voltage level too low?

Wrote a python script using SMBus to write to a slave I2C device. The slave is detectable with i2cdetect which results in the following output debian@beaglebone:~$ i2cdetect -y -r 2 0 1 2 3 4 5 6 7 8 9 a b c d e f 00: -- -- -- -- -- -- -- -- -- -- -- -- -- 10: --

[beagleboard] Re: How to wire up and configure an i2c device on Beaglebone

I would like to ask the same question that klemenz is asking. Does cloud9 provide a framework to run i2c slaves with js or python? On Wednesday, March 7, 2012 at 10:44:32 PM UTC+13, klemenz...@gmail.com wrote: > > Hi Dan, > > Is there an i2c support within cloud9ide environment or more

Re: [beagleboard] Re: i2c bus speed

23, 2018 at 2:37:48 PM UTC+13, yassyass wrote: > > > Heres the boot log: > https://pastebin.com/fgkRkCRv > > It seems to say that the I2C busses are set at 100 kHz because "could not > find pctldev for node > /ocp/l4_wkup@44c0/scm@21/pinmux@800/pinmux_i2c2_pi