You use them for +dial otherwise rp/rl will work
Randall
Sent from my iPhone
On Jun 1, 2011, at 6:31 PM, adam compton com...@gmail.com wrote:
The list is probably tired of hearing from me tonight :)
So when should you choose Called party transformation mask over route
pattern/route list
Hello,
Facing a strange issue in CME Phones, when i enable privacy-button on the
IP Phone the MWI does not work. CME is integrated with CUE.
Is it expected behavior.
Warm Regards,
Vinay Kumar
___
For more information regarding industry leading
Randall,
Did you ever get this working? I ran into the same problem during my last
rack session. Nothing I did fixed the problem. Wasted so much trying to
get this resolved. Not sure if it was due to an error in my config or a
problem with CUE/CME interfacing.
I checked my configs against
Worked exactly like you said this morning. I know this could potentially be
a question on the test, so this is a good method that doesn't involve
changing anything with the routing.
Thanks!
Adam Compton
On Wed, Jun 1, 2011 at 11:28 PM, Sam Park upperlevelpark...@gmail.comwrote:
Adam;
Been
In the middle of working a proctorlab session right now :) I'll give sip
mwi a shot and let you know.
On Thu, Jun 2, 2011 at 10:05 AM, Sam Park upperlevelpark...@gmail.comwrote:
Did you get SIP MWI to work? I could not get it to work.
Also, I found that you don't need to add the ip route
Are the CME GUI files actually located under the flash:/GUI directory? I have
seen this problem happen where the files aren't there or you're setting the
path variable to something that is incorrect.
Earl Hough
CCIE #16508 (RS/Security/Voice)
From: ccie_voice-boun...@onlinestudylist.com
So did you just specify the ip address and your mask was /32? Just asking
because the post before has /31
Randall
Sent from my iPhone
On Jun 1, 2011, at 6:23 PM, adam compton com...@gmail.com wrote:
I've got a weird requirement for configuring a CUE module. Normally you use
ip unnumber
Sam was correct. I had to use /31 mask. /32 was invalid mask and /30
overlapped with another interface.
On Thu, Jun 2, 2011 at 10:24 AM, Rrcrumm rrcr...@yahoo.com wrote:
So did you just specify the ip address and your mask was /32? Just asking
because the post before has /31
Randall
Sent
Hi Guys
I have a very basic question about DHCP. most of the time this works with out
any issue.
Is there anyway that we can DHCP debug in CUCM ?? Can we get the mac biind with
the IP form CUCM ?
Best RegardsJ anzar
I would say it all depends on the dial plan. Both can pretty much accomplish
the same; the problem at least for me is, how complex it gets when TEHO,
backup GWs and calling/called party presentation comes into play. In my
opinion CdPT patterns are scalable and they help you reduce your dial plan
Earl,
Yes, the files are in the correct directory. As it turns out, I got it
figured out 10 minutes after I sent my post. The problem was in fact the
license.
I went back to one of Vik's earlier walkthrough videos, and the answer was
there. The video didn't specifically address the login
HI,
I have a question.
Say I have a CME and have a dial-peer for intl calls that goies out local GW
I also need two dial-peers(1 backupo) to route calls through Gatekeeper@HQ, 1st
choice, or through the branch 1 gw as a backup.
I get calls to work through the GK but when it is down my calls go
Packetization delay (πn) is the time taken to fill a packet payload with
encoded/compressed speech. This delay is a function of the sample block size
required by the vocoder and the number of blocks placed in a single frame.
Packetization delay can also be called Accumulation delay, as the voice
I was looking at it from the perspective you could not change the SM
Randall
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of adam
compton
Sent: Thursday, June 02, 2011 7:28 AM
To: Rrcrumm
Cc: ccie_voice@onlinestudylist.com
Hi,
In my opinion if you have such scanario you should use class based frts
which does not require frame-relay traffice-shaping command on physical
interface.
So you can configure shaping for one PVC not affecting the other.
--
Best regards,
Bartosz
2011/6/1 adam compton com...@gmail.com
So I
John,
No debugs in CUCM for DHCP but you still have the Cisco DHCP Monitor Service
Traces and packet capture.
There is no way to bind the MAC of a device to an IP address as far as I can
tell; there is no option in GUI to accomplish this.
Regards,
Roger Carpio.
On Thu, Jun 2, 2011 at 8:45 AM,
I have a switch qos item I am not sure how to address:
When queue 2 reaches 60% capacity COS 4 packets should be dropped.
COS 4,6,7 is mapped to queue 2. any ideas?
Adam Compton
___
For more information regarding industry leading CCIE Lab training,
What shown the command sh software license in cue?
What shown in the command sh flash | in .html?
De: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] En nombre de John Ciccone
Enviado el: Jueves, 02 de Junio de 2011
Guys ,
i'm using this multi lab version for the testing. when i test mobility
features i notices that mobility soft key is not appearing and its not
even showing the HLOG soft key. Any of you came across this
situation ?
Thanks
--
Ravindra Lakpriya
Hi,
Ingress or egress??
My quess it to put COS 4 into different threshold than COS 6 and 7 and for
egress tune queue-set assigned to the interface.
I assume that auto qos was run before.
*! put cos 4 in Q2 threshold 1
*mls qos srr-queue output cos-map q 2 t 1 4
*! tune dscp to queue map as it
Instead of using destination-pattern 9001212T in dial-peers 2 and 3, use
something more specific, such as 9001212...$ instead.
cheers, sd
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Randall
Crumm
Sent: Thursday, June 02,
Hi,
Config provided is good. If it goes via dial-peer 1 instead of dial-peer 3
the problem is at BR1 site.
Check incomming dial-peer on BR1 etc.
Use voice iec syslog on CME and BR1. It may indicate where the problem is.
Search the list archive on how to use voice iec feature.
--
Regards,
Bartosz
CoS 4,6,7 are probably mapped to queue 2 threshold 2. Just move CoS 4 to
queue 2 threshold *1*, then make sure the threshold settings for queue 2
are 60 100 100 100 (the last 3 values aren't critical, you just need the
60 so that CoS 4 packets are dropped starting at threshold 1 - 60%).
Hi,
For US you need configure
HQ
Ntp server xx.xx.xx.xx
Clock timezone pst -8
Clock summertime pst recurring
For Honkong
Ntp server xx.xx.xx.xx
Clock timezone hkg 8
Do no use recurring, China does not have savelight
Verify the time the phones get checking the real time and the timezones
I'm dropping connections and it is very slow___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
So I did a little bit of reading. Auto QOS was mapping COS values to the
queues at threshold 3. I mapped COS 4 to queue 2 threshold 2:
mls qos srr-queue output cos-map queue 2 threshold 2 4
So I know that the command is something like someone listed:
mls qos queue-set output 2 threshold 2 60
how do you do the packet capture from the cucm cli ?
2011/6/2 Miron Kobelski findko...@gmail.com
Hi,
I was unable to find anything better then packet capture on CUCM CLI - it
allows you to see if the DHCP messages hit the CUCM and are sent back, but
not much more ;)
best regards
On
I agree with Bartosz and Steve's answers
i'd check the threshold and associate COS 4 to Queue 2 on a either threshold
1 or 2 and then modify the threshold to be 60% or whatever they're asking
2011/6/2 Steve Denney (stdenney) stden...@cisco.com
CoS 4,6,7 are probably mapped to queue 2 threshold
will it be also valid to use the command
ntp source lo0 for example ?
or if you use the command above you risk the points ?
2011/6/2 Friderich Claude cfrider...@netcore.lu
Check the time-zone they ask for and if this time-zone contains a
daylight saving time (compare to the geographical
mls qos queue-set output 2 threshold 2 60 100 100 400
mls qos que-set ouput queue set # threshold queue-id drop-threshold1
drop-threshold2 reserved-threshold maximum-threshold
2011/6/2 adam compton com...@gmail.com
So I did a little bit of reading. Auto QOS was mapping COS values to the
I'm hoping someone can help me out here. I am trying to understand the
process of how Unity Connection turns on the MWI light on a phone across a
SIP trunk when the CUCM has a full E.164 dialplan. I can see that the SIP
NOTIFY is sending the MWI notify across the trunk, but I never see when the
Is there a good way to confirm that mgcp switchback immediate is actually
working. Whether I configure it manually or through ccm with config server,
whenever I run debug mgcp packet, it always says graceful. Is this normal or
is there something I am missing?
May 6 01:07:26.934: ISDN
I'm testing with Unity Connection 7.0.
Let say if the voicemail ports are in region A. IP phones and voice gateway
are in region B. Cross-region codec was G.729.
IP phones can call VM pilot just fine (with G.729).
However, if PSTN calls IP phone and rollover (CFNA/CFB) to voicemail, I got
Does it do anything without filling in the start date and end date?
2011/6/3 Roig Borrell, Francesc Xavier francesc.ro...@tecnocom.es
Hi,
For US you need configure
HQ
Ntp server xx.xx.xx.xx
Clock timezone pst -8
Clock summertime pst recurring
For Honkong
Ntp server
34 matches
Mail list logo
