Agree with Wilson, I Upgrade the machines to 10.x, backup with DRS, restore
the the publisher in the new OVA with 10.x and install subscribers as
needed. The cutover must be clean if you dont upgrade the firmware for all
the phones at the same time, just make a controlled upgrade for the phones
Two ways to do it. On the gateway create an outbound translation pattern
and apply it on the D channel of the trunk. Second option, use
transformation masks on the outbound in your desire place.
On 05/07/2014 3:46 AM, Dharambir kumar varma dharambi...@gmail.com
wrote:
Hi All,
Would you
Is this for a lab? Cause the system come with some demo license.
Abel
On May 12, 2014, at 7:18 PM, Isamar Maia isa...@gmail.com wrote:
OK. Great. In worst case, on how much I should prepare my pocket for ?
2014-05-12 0:04 GMT-03:00 Abel Mateo midga...@gmail.com:
As far I know
As far I know the licensing is per every seat is a ip ivr license.
Abel
On May 12, 2014, at 10:54 AM, Isamar Maia isa...@gmail.com wrote:
Hi Folks
For only 5 channels, approximately, how much should be the budget to
add Cisco IP IVR to our CUCM structure ?
--
Isamar Maia
Cel
Export your config and return the VMware snapshot to the moment after the
installation
Abel
On Apr 7, 2014, at 5:40 AM, Chris Avants cava...@gmail.com wrote:
So was so happy to update my home CCIE Collaboration lab to 9.1 images to be
current on the new lab, as I want to sit
Oh good, at some place I miss read it.
On Sat, Feb 15, 2014 at 4:22 PM, m george m.george00...@gmail.com wrote:
Abel, That's not true.Last date is feb 13,2016. Read here :
*Option 2*: Pass the CCIE Collaboration Written Exam and then
*permanently* convert your CCIE Voice certification
Agree, you need to live to find sense on it.
Abel
On Feb 14, 2014, at 1:09 PM, m george m.george00...@gmail.com wrote:
If you think it was nonsense, you don't know what you are talking about.
On Fri, Feb 14, 2014 at 3:04 AM, Nicolas MICHEL mcl.nico...@gmail.com
wrote:
I am happy
You're not first one to said the same history about the voice lab. My
suggestion is try to lab down what you did in the lab, check your solution
and try to remember if they really asked you that or if that is the usual
solution provided by cisco site.
Abel Mateo
CCIE#28546
R/S | Voice
On Jun 9
At the moment nothing official about that, only the upgrade path. But if
they said yes, are you going to said Hey I'm double CCIE, Oh, Really?
Which tracks? , CCIE Voice/Collaboration!!, Plop!
On Sat, Jun 8, 2013 at 4:27 AM, Mohamed Gazzaz mgaz...@hotmail.com wrote:
Hi,
Let's say you are a
Yes, it does.
On Sun, Jun 2, 2013 at 10:28 PM, Karen Johnson karen.johnson...@yahoo.cawrote:
My question is :
If we only pass ccie voice lab then get ccie number and we keep renewing
it . When cisco retired it in Feb 2014. Does my ccie number count for
silver or gold partnership discount?
The system only allow one booking per time.
On Apr 30, 2013 10:02 PM, Bill Lake whl...@gmail.com wrote:
I know this can be true. When I took my lab, another version was updating
and I talked to one of the guys taking it. he said that all the seats were
full for the next 6 weeks. So if he
Learn to use both of it. In the lab you are not force to use one or the
other but sometimes the CLI is so slow that make you lost time. At the end
if you practice a lot and know where to find the configuration for CLI you
would be able to make the full config in matter of minutes.
Abel
On Mon
It fail sometimes, what I do is set it manually after select it in the GUI.
Abel Mateo
On Tue, Apr 9, 2013 at 9:40 AM, William Bell b...@ucguerrilla.com wrote:
Not sure about item i. I always set the switch type in the GUI.
For dtmf relay, I always set in IOS because I believe the versions
I used the 95% rule and I passed it too. So, read the requirements word by
word.
On Apr 9, 2013 5:43 PM, Leslie Meade leslie.me...@lvs1.com wrote:
Here is my take, and take it at face value..
** **
When I took my lab I asked the proctor am I to follow best practices and
use the 95%
Check the tech prefix in BR2 base on the command
h323-gateway voip tech-prefix 1#
is using 1 like the CUCM. Try using anything else like 2 and create an
inbound dial peer and remove the tech prefix at the CME. I usually do this
with the same transformation profile for the inbound call from the
My story to get my voice was like a funny movie. In the first attempt I
thought I got it cause I finished every task but like happens for most of
us I misread some stuff and fail.
In my second attempt my first daughter born one week before the lab, I
didn't practice a lot but for some reason I did
Is possible, because close to the lab I was studding around 16 hours per
day, that means eating over the keyboard minus some minutes to stretch and
walkout.
On Sat, Jan 26, 2013 at 9:09 PM, Pascal PRUDENT dominifil...@gmail.comwrote:
Hi,
And Congratulations for your success.
In your
Just adding something else. Before the lab try to do all requirements for
H323, CUCME, qos from your head for time drills test. If you need to check
something do it with the admin guides only.
Congrats Cory. Now what's next CCDE?
On Jan 24, 2013 7:03 PM, Sam Park upperlevelpark...@gmail.com
Try an inbound call from the pstn and run your debugs. Check the channel
used in that call. That test is to discard L1/L2 issues.
On Jan 9, 2013 6:21 PM, Cory Gray corygray22...@hotmail.com wrote:
I will say this. This happened to me once using MGCP and could never
figure
it out. I just
call clearing
*Jan 9 08:59:44.195: ISDN Se0/0/0:23 Q931: TX - RELEASE pd = 8 callref =
0x8084
*Jan 9 08:59:44.207: ISDN Se0/0/0:23 Q931: RX - RELEASE_COMP pd = 8
callref = 0x0084
HQ-RTR(config-if)#
Le Wednesday, January 09, 2013 11:50:14 PM, Abel ... a écrit :
Try an inbound call
Really? At least do some googling before run the marketing campaign to your
friend/relative/boss/put your answer here.
Regards
On Dec 28, 2012 9:10 AM, Sheraz Sheraz she...@live.com wrote:
Roman Rodichev 6x CCIE #7927 ( yes six ). Roman is the first person in
the world to hold all 6 active
probably the next summer if not earlier.
On Dec 13, 2012 10:49 AM, otunola.aker...@gmail.com wrote:
Hi guys,
I heard cisco is changing the ccie voice lab blueprint soon, please
when do you think that's gonna be guys??
Ola
Sent from my BlackBerry® Smartphone, from Etisalat. Enjoy
Best explanation for the factor.
Regards,
Abel Mateo
CCIE28546 - RS/Voice
On Fri, Nov 30, 2012 at 7:07 PM, Bill Lake whl...@gmail.com wrote:
Best guess as to the reasons more people pass as they take more exams:
1. More comfortable with environment, equipment time requirements.
2
For voice you have access in the desktop to the QoS Configuration Guide,
CME SRND and CUCM SRND. The Cisco documentation site with search enable for
the web page using Internet Explorer search tool.
On Thu, Nov 8, 2012 at 2:10 PM, Marko Milivojevic mar...@ipexpert.comwrote:
Disclaimer: I'm not
Try it with voice-card 0 with dspfarm also. Then the sessions under the
media resource.
On Fri, Oct 26, 2012 at 12:54 PM, Nicolas MICHEL mcl.nico...@gmail.comwrote:
Hi Guys,
Looks like I cannot add a Conference bridge on BR1-RTR (I'm using PL).
I have configured the voice-card 0 to share
transformation,
the one applied to the phone.
Abel Mateo
CCIE #28546 - RS/Voice
On Fri, Sep 21, 2012 at 8:33 AM, Nicolas MICHEL mcl.nico...@gmail.comwrote:
Then your gateway does not invoke the Callin party Transformation pattern
(Maybe a CSS/PT problem)
** **
You should also have a Translation
The first step in the gateway is the globalization of the number, the last
one is the localization of the number. Try to think it like two different
process.
On Fri, Sep 21, 2012 at 9:35 AM, Abel ... midga...@gmail.com wrote:
Try it without the calling party transformation applied in the phone
The answer of a CCIE, specially from inside the corporation.
On Mon, Sep 17, 2012 at 11:00 AM, Dan Quinlan (daquinla) daqui...@cisco.com
wrote:
Create a new Call Manager group that has the UCM servers in the order
you want them to use. Create a new Device Pool that uses the new UC group.
Well, yes, it look like is working but in the background for HQ router
native vlan is 101 so, untagged traffic is send over vlan 101, on the far
switch the untagged traffic is been put on the native vlan (untagged) of
the local switch, in this case 1. That is why everything can work even with
this
Be careful with the + sign, most of the time is not allowed on called
number.
On Sun, Jul 29, 2012 at 8:54 PM, chase mergenthal cm3_...@hotmail.comwrote:
Good call!
-Chase Mergenthal
--
If someone doesn't know how to do that, don't deserve the number, or
be called expert.
On Wed, Apr 25, 2012 at 5:52 AM, Ken Wyan kew...@gmail.com wrote:
Hey,
BUG ???
Use a good bugkiller , then you can sleep well I hope without shouting
spamming.
On Wed, Apr 25, 2012 at 1:01 PM,
VM on
CUC.
On Wed, Apr 25, 2012 at 3:07 PM, lab7done lab7done lab7d...@gmail.com wrote:
Hi,
NOW FOR ABEL
If someone doesn't know how to do that, don't deserve the number, or
be called expert.
FROM THIS STATMENT I AM FEELING LIKE U ARE VERY FRESH IN VOICE or I.T
YOU BECOME EXPERT WHEN
You lost more than 20% on previous sections?
On Sat, Feb 25, 2012 at 11:23 AM, eng_firasoq...@yahoo.com
eng_firasoq...@yahoo.com wrote:
Hi,
Dears plz if u suppose this NDA violation plz discard this mail.
I take my first attempt I failed.
I get 0 points in UCCX section presence I
Experts *have a prolonged or intense experience through practice and
education* in a particular field. In specific fields, the definition of
expert is well established by consensus and therefore it is not necessary
for an individual to have a professional or academic qualification for them
to be
Try to get an old cisco press book called Gateways and Gatekeepers. Good
source of information.
On Tue, Jan 10, 2012 at 5:40 PM, Jeferson Guardia jefers...@gmail.comwrote:
Thanks, I just read the article and starting the INE deep dive, really
helpful stuff, I recommend for anyone facing the
What your Q.931 debug tell you on the gateway and the PSTN?
On Thu, Dec 8, 2011 at 12:13 AM, ccielabrat ccielab...@gmail.com wrote:
To All,
I just needed to check to see if anyone knows about a problem using
calling party transformations at the gateway level.
I have a setup where I am send
Did you create a dedicated Location for the GK and limit the traffic for
all the other to g729?
On Mon, Nov 21, 2011 at 8:14 AM, datucha123 datucha123 datucha...@gmail.com
wrote:
I have the follwoing issue on GK:
So here is the configuration of my GK
*gatekeeper
zone local SEA ine.com
Well, the DHCP issue can be done easy if you look 5 minutes on
cisco.comdocumentation, by Early offer what you mean? no interdigit
timeout?
On Sun, Nov 20, 2011 at 2:22 PM, datucha123 datucha123 datucha...@gmail.com
wrote:
Do you mean under the DHCP configuration, that such question has been
From CCM4.x SRND
•H.225 trunk (gatekeeper controlled)
Always use this configuration to communicate with any combination Cisco
Unified CallManager (Release 3.2 or later) or other H.323 endpoints that
are all controlled by a common set of gatekeeper(s). Cisco Unified
CallManager will use the
resolution for intercluster calls. A single
intercluster trunk can communicate with all remote clusters.
On Wed, Nov 16, 2011 at 12:55 PM, Abel ... midga...@gmail.com wrote:
From CCM4.x SRND
•H.225 trunk (gatekeeper controlled)
Always use this configuration to communicate with any combination Cisco
Can we see the class map for RTP Class?
On Fri, Nov 4, 2011 at 9:42 AM, Nicolaers Luk
luk.nicola...@quentris-gdfsuez.be wrote:
Hi,
I'm trying to setup CB traffic shaping with CRTP.
This is the config of the policy maps:
policy-map VOIP
class RTP
Well
Speed depends of how full is the floor, but I almost sure SJC is fast than
RTP
Proctor depends of how you ask your questions...
HW is the same everywhere... you connect remotely to SJC
Abel Mateo
CCIE#28546
On Thu, Nov 3, 2011 at 8:18 PM, donny f f.faraday...@gmail.com wrote:
hi all
The command in the port (trust cost) is required, even if the cos mapping is
to the queues and thresholds.
On Mon, Sep 26, 2011 at 8:44 PM, Leslie Meade lme...@salientnetworks.comwrote:
When setting qos on a phone port, to trust dscp only. Is it necessary to
change the mls qos commands for cos
Im also having the same problem with CUCME.
2011/8/11 bruno bruno.juni...@gmail.com
hello expert ,
i use unifiedfx phoneview software on cme and follow their guide.
In PhoneView if you goto Group-Add and use the following credentials to
tie in the CME config provided:
Admin User:
Try to undo the AutoQOS command with the script. Then paste or write
yourself the commands create by AutoQoS, if problem persist try to configure
QoS without NBAR. This is just to check if is an IOS issue, Also I see
you're using IPS 15.0, try it with IOS 12.4T on lasted versions.
Regards
On
Skip the NBAR Part, I see is only ports and IP in the configurations.
On Wed, Aug 3, 2011 at 4:43 PM, Abel ... midga...@gmail.com wrote:
Try to undo the AutoQOS command with the script. Then paste or write
yourself the commands create by AutoQoS, if problem persist try to configure
QoS
Try to create profile command under voice register global again.
On Wed, Aug 3, 2011 at 5:42 PM, Jason Lee jas7...@gmail.com wrote:
All,
I'm running into and issue trying to register SIP phones to my CUCME
rotuer. I'm using SIP Digest Authentication. For some reason the
voice quality issues
until we applied it.
On Wed, Aug 3, 2011 at 3:43 PM, Abel ... midga...@gmail.com wrote:
Try to undo the AutoQOS command with the script. Then paste or write
yourself the commands create by AutoQoS, if problem persist try to configure
QoS without NBAR. This is just to check
Hello list,
I finish today the endpoint CUCME registration chaper and I getting issue to
test everything with X-lite. I have my own pod with 7965 but I don't have
enough of those phones to use it as SIP endpoints. My question is, for SIP
phones, at some point of the WB1 or WB2 I need more than
You have the option to connect it on a FE port on the router but it would
required a power brick, as proctor lab topology the PSTN and the Phone are
connected to the data vlan on the HQ.
Grts
On Sat, Jul 23, 2011 at 6:19 PM, michael.se...@compucom.com wrote:
Hello,
Where does the PSTN
) certification(s)
with training locations throughout the United States, Europe, South Asia and
Australia. Be sure to visit our online communities at
www.ipexpert.com/communities *http://www.ipexpert.com/communities* and
our public website at www.ipexpert.com *http://www.ipexpert.com/*
From: Abel
) certification(s)
with training locations throughout the United States, Europe, South Asia and
Australia. Be sure to visit our online communities at
www.ipexpert.com/communities *http://www.ipexpert.com/communities* and
our public website at www.ipexpert.com *http://www.ipexpert.com/*
From: Abel
Anyone can help me with this?
Thanks
On Thu, Jul 14, 2011 at 8:41 PM, Abel ... midga...@gmail.com wrote:
Hello everyone, I'm have this strange issue with PhoneView, for some reason
registered phones can be remotely access from the App, a screenshot of the
app is attached on the mail. Also
I have the same issue some time ago, try this:
1. Create a folder named WINNT in c:
2. Copy c:\WINDOWS\Java to WINNT
3. Go to Cisco JTAPI Resync in the Unified CM Telephony Subsystem to install
the Cisco JTAPI Client
4. Go to SystemControl Center and restart Cisco Unified CCX Engine
On Mon, Jul
DHCP is configure on Workbooks task.
10.10.110.3 as Default route and TFTP? for all or for the branch?
Grts
On Wed, Jun 8, 2011 at 8:01 AM, Voiper datapack...@gmail.com wrote:
Hi Friends:
Building my home lab was exciting. Getting the basic infrastructure
configured correctly is fun and
Hello everyone, I got two CUE from a friend, but one of then is rebooting
the router. Hardware issue? there is a way to test it with parts of the one
working?
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
There something we should know about the VWIC-2MFT-T1-DI, cause is a little
cheaper than the normal one. Can we use the DI like the normal one? I was
wondering about that some time ago.
Thanks
On Mon, May 30, 2011 at 8:49 PM, Bill Lake whl...@gmail.com wrote:
VWIC-2MFT-T1 is a flex port that
are there for you. For each lab / Initial configs
All you have to do is tweek them for your hardware setup.
Sam
On Wed, May 25, 2011 at 7:34 AM, Voiper datapack...@gmail.com wrote:
Thanks Abel.
Are you using 2 physical and 2 software phones for BR2?
On Tue, May 24, 2011 at 7:25 PM, Abel ... midga
Hello everyone;
I'm in the process of build my home lab, I have some issues to get UCCX 7.0
but I have at work UCCX8.0. I can use version 8 for lab purpose in the mean
time, there is a lot of difference apart of the Host OS?
Thanks
___
For more
Im also building my lab. As far I know there is a layer 3 network between HQ
and PSTN, From this point the other network device can get time.
On May 24, 2011 7:01 PM, Voiper datapack...@gmail.com wrote:
Hi Compadres:
I finished setting up my home lab hardware and am on the onset of starting
my
Hello everyone,
My question is, how many phone I need to mimic PL. I'm building my rack to
cover the IPX workbooks from end to end.
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a
29829? It looks number are not assigned in a lines fashion, cause my friend
pass it las thursday and.he got 28901; im 28546 and i got it on march 31;
maybe a typo.
Congratulations mate
On May 17, 2011 5:20 PM, Sam Park upperlevelpark...@gmail.com wrote:
Great Job!
On Tue, May 17, 2011 at
. They should basically function exactly the same except
for the screen.
On Mon, May 16, 2011 at 12:40 AM, Abel ... midga...@gmail.com wrote:
Hello everyone, I was wondering about the model and quantity of phones
on
the real lab. I'm asking cause I'm doing a shopping list for my home lab
phones but you can go with the less expensive
7962 phones. They should basically function exactly the same except
for the screen.
On Mon, May 16, 2011 at 12:40 AM, Abel ... midga...@gmail.com wrote:
Hello everyone, I was wondering about the model and quantity of phones
on
the real lab. I'm
And to cover IP Expert from end to end? the same?
On Mon, May 16, 2011 at 2:00 PM, CCIE Voice cc...@corb.net wrote:
you need 3 HQ phones, 2 each at sites B and C and the pstn phone...ideally
each should have 6 lines. Go with 7962 or 7965.
On Mon, May 16, 2011 at 10:51 AM, Abel ... midga
Hello everyone, I was wondering about the model and quantity of phones on
the real lab. I'm asking cause I'm doing a shopping list for my home lab
where I want to cover all on the first try.
Thanks for the help
___
For more information regarding
phones like the telecasters generation use ntp clock from the router.
This can be confirmed doing more on config files.
On May 11, 2011 6:33 PM, Randall Saborio ill2...@gmail.com wrote:
Hey Abel, buenisimo q te sirvio.
Can you be more specific on what did you add to get it working? You mean you
had
entered them before having the issue
telephony-service
em logout 0:0 0:0 0:0
xml user admin password cisco 15
max-ephones 16
max-dn ...
On Wed, May 11, 2011 at 5:33 PM, Randall Saborio ill2...@gmail.com wrote:
Hey Abel, buenisimo q ...
___
For more
:00 PM, Abel ... midga...@gmail.com
midga...@gmail.com wrote:
It look like the CME is not creating the cnf files for 7965
CUCME#sh telephony-service tftp-bindings
tftp-server system:/its/united_states/7960-tones.xml alias
United_States/7960-tones.xml
tftp-server system:/its
Hello everyone, I'm having this stange issue with CME 7.0.1, the router is
getting correct time from NTP and some phones are getting the right time
from the CME (7940) and other don't (7965 and CIPC), if someone know how
solve this issue, please let me know.
Thanks
Abel
Brian
- Reply message -
From: George Goglidze gogli...@gmail.com
Date: Mon, May 9, 2011 7:36 pm
Subject: [OSL | CCIE_Voice] Problem with Time on CME
To: Abel ... midga...@gmail.com
Cc: ccie_voice@onlinestudylist.com ccie_voice@onlinestudylist.com
Put the configs here...
I don't
the same as timezone 14?
Can't remember.
Is the ntp in synch on the router?
Show ntp status
Show clock
- Reply message -
From: Bill Lake whl...@gmail.com
Date: Mon, May 9, 2011 7:50 pm
Subject: [OSL | CCIE_Voice] Problem with Time on CME
To: Abel ... midga...@gmail.com
Cc
global
ntp-server ip address
timezone 14
This should fix your issue
On Mon, May 9, 2011 at 7:42 PM, Abel ... midga...@gmail.com wrote:
-4:00 is the same as 14 = -4*60=-240
CME have right time and NTP is synch, as I said the 7940 are getting time
ok, so the NTP config is right, I
.cnf.xml alias
SEP00042744AC58.cnf.xml
On Mon, May 9, 2011 at 10:00 PM, Jason Langenfeld
jlangenf...@prosysis.comwrote:
If you do show telephony-service tftp-bindings, then more with the phone
config file, is the timezone set correctly?
On 5/9/11 7:42 PM, Abel ... midga...@gmail.com wrote:
-4:00
Thanks
Abel Mateo
CCIE R/S 28546
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
...@onlinestudylist.com [mailto:
ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Abel ...
*Sent:* Thursday, April 28, 2011 2:43 PM
*To:* ccie_voice@onlinestudylist.com
*Subject:* [OSL | CCIE_Voice] SW Version for Lab
Hi everyone, the following list is the recommended software to be use on
lab, is ok use
, any advice with those or I should use a 3725 I have available?
Last thing is, I need 9 to 10 phones to cover the workbooks and labs? Cause
in the diagram in proctor labs is one phone in each site, BR2 is the only
one with 2 phones. This is up to date?
Thanks for the help.
Abel Mateo
CCIE#28546
-2011 a las 22:04 -0500, Bill Lake escribió:
do you want a full lab or a partial one to connect to rack rental?
On Mon, Apr 25, 2011 at 9:27 PM, Abel ... midga...@gmail.com wrote:
Hello everyone, This is my first post here, can someone help
me with a guide to build a home lab
Can I use the 3725 as a branch and a 2811 as path cause i don't have nm for
dsl farm?
On Apr 26, 2011 10:49 AM, Hough, Earl earl.ho...@pcmallservices.com
wrote:
Abel,
You can use WIC-1T modules for Frame-Relay connections using back-to-back
serial cables just like you did for R/S. Just make
All the branchs run CME?
On Tue, Apr 26, 2011 at 11:04 AM, Hough, Earl earl.ho...@pcmallservices.com
wrote:
Abel,
Yes, you can. However, the 3725 is limited in how far in the 12.4T release
train it can go. I believe 12.4.15T is the latest. Meaning, it can’t run
CME 7.0.1. There may
As Far i know only one branch run CME.
Grts
On Tue, Apr 26, 2011 at 11:13 AM, Abel ... midga...@gmail.com wrote:
All the branchs run CME?
On Tue, Apr 26, 2011 at 11:04 AM, Hough, Earl
earl.ho...@pcmallservices.com wrote:
Abel,
Yes, you can. However, the 3725 is limited in how far
as CME. Normally your HQ and BR1
sites are either MGCP or H323 gateways and BR1 will be used for SRST. BR2
is usually a CME site, but sometimes may be another UCM branch.
Earl Hough
CCIE #16508 (RS/Security/Voice)
*From:* Abel ... [mailto:midga...@gmail.com]
*Sent:* Tuesday, April 26
Hello everyone, This is my first post here, can someone help me with a guide
to build a home lab.
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job?
rental?
On Mon, Apr 25, 2011 at 9:27 PM, Abel ... midga...@gmail.com wrote:
Hello everyone, This is my first post here, can someone help me with a
guide to build a home lab.
Thanks
___
For more information regarding industry leading CCIE Lab
84 matches
Mail list logo
