Re: [OSL | CCIE_Voice] Is the list actually down?

[Ramcharan Arya]

I believe there is apps name "tap a talk"  for this new forum. If you logon
into new forum on right  under Ipexpert Chatter  it is mentioned " If you'd
like to be able to access our Member's Community from your iPhone or
Android, download this PDF <http://community.ipexpert.com/TapaTalk.pdf> for
instructions.

Regards,
Ramcharan Arya
CCIE # 28926 (Voice/R&S)




On Thu, Jun 26, 2014 at 7:06 PM, Robert McGhee 
wrote:

> I think there is a smartphone app for the new forum...
>
> Sent from my iPhone
>
> On Jun 26, 2014, at 6:44 PM, Josh Petro  wrote:
>
> Wayne,
> If you're still reading off this email list,  I really do like the new
> IPExpert site, but since I'm not always able to login to it, especially
> when I'm on my phone,  its not as appealing as this study list. I may have
> missed where you can sign up for the forum and have the topics and
> discussions of the day emailed to you, but if not, I probably won't use it
> as much. The email list is just too convenient.
> Is there a way to only email people with active accounts or something?
> Maybe that would help weed out all of the SPAMers and jerks trying to
> cheat. Just a thought (and I'm sure you've already looked at it as an
> option). Anything to keep things coming to an email would be sweet. Or, a
> smartphone app would be even better, but I'm sure that's overkill for what
> you're trying to do.
> Josh
> On Jun 26, 2014 1:23 PM, "Edgar Mauricio Diaz Orellana" <
> eorellan1...@gmail.com> wrote:
>
>> i get the email!
>>
>> ___
>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>>
>> iPexpert on YouTube: www.youtube.com/ipexpertinc
>>
> ___
> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>
> iPexpert on YouTube: www.youtube.com/ipexpertinc
>
>
> ___
> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>
> iPexpert on YouTube: www.youtube.com/ipexpertinc
>
___
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::

iPexpert on YouTube: www.youtube.com/ipexpertinc

Re: [OSL | CCIE_Voice] RIP CCIE-Voice :-)

[Ramcharan Arya]

Those who are choosing option # 3 - for those candidate IPX should provide
a different training program just to cover only specific features in new
blueprint. This might be beneficial. Assumption that candidates who have
CCIE voice certification  expert level understanding on infrastructure,
gateway protocols ( H.323, MGCP, SIP etc..), QOS and other topics from
previous blueprint.


I would think about option # 3 after Data Center lab planned this year.

Thanks,
Ramcharan Arya
CCIE # 28926 (Voice/R&S)





On Sat, Feb 15, 2014 at 3:05 PM, Mark Holloway  wrote:

> From a Cisco partner business perspective I don't see how it would make
> sense to have your current CCIE's retake the lab when they could just as
> easily migrate to Collaboration after taking their written renewal. Time is
> money, and consuming your top resources with another lab certification with
> no foreseeable gain seems like a waste. I imagine most folks working for
> partners are already deep into the same platforms on the Collaboration
> blueprint. At minimum, they should at least have the UC NFR software setup
> in their own lab already.
>
> On Feb 15, 2014, at 12:10 AM, m george  wrote:
>
> Will anyone here who already passed voice lab preparing to undertake
> collaboration lab for 2nd CCIE title ? I have talked to many folks & me &
> my colleagues we plan to convert our titles to Collab IE with written
> rather than going for another hectic lab. What's your guys take on this ?
> What will you do  ?
>
>
> On Sat, Feb 15, 2014 at 3:54 AM, Abel ...  wrote:
>
>> Upgrading my home lab already, kind of expensive with new 29xx. But just
>> for the knowledge sake.
>>
>>
>> On Sat, Feb 15, 2014 at 7:15 AM,  wrote:
>>
>>>  Aha Nicolas, you have a point sir.
>>>
>>> Anyway, I just wanted to make the passage of the track / version
>>> somewhat memorable that's all.
>>>
>>> No need to get serious on this now (note to myself as well)
>>>
>>> Lets get the Colloboration done..
>>>
>>> Btw, who is attempting it on tihs forum and how you have prepared for
>>> it? Lab Gear??
>>>
>>> Regards
>>>
>>>  --
>>> *From:* Mergenthal, Chase [chase.mergent...@bestbuy.com]
>>> *Sent:* Friday, February 14, 2014 3:01 PM
>>> *To:* Nicolas MICHEL; Samuel,W,Wilson,JKH3 R
>>> *Cc:* Online Study
>>> *Subject:* RE: [OSL | CCIE_Voice] RIP CCIE-Voice :-)
>>>
>>>   It's funny you mention that, on my second or so attempt; at the end
>>> of the exam UCCX wasn't working at all... I got 100% on UCCX...
>>>
>>>
>>> --
>>>
>>> Chase Mergenthal
>>>
>>>
>>> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
>>> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Nicolas MICHEL
>>> *Sent:* Friday, February 14, 2014 1:41 PM
>>> *To:* wilson.sam...@bt.com
>>> *Cc:* Online Study
>>> *Subject:* Re: [OSL | CCIE_Voice] RIP CCIE-Voice :-)
>>>
>>>
>>> Wilson, I am already a CCIE in RS so I know what to expect when I am
>>> taking a CCIE exam.
>>>
>>>
>>> When you skip the UCCX task because you ran out of time and when you
>>> score report says : UCCX = 100%, to me it means complete nonsense :)
>>>
>>>
>>>
>>> Lots of people have different opinion and point of view :)
>>>
>>>
>>>
>>> Cheers
>>>
>>>
>>>
>>> Nicolas
>>>
>>>
>>> ___
>>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>>>
>>> iPexpert on YouTube: www.youtube.com/ipexpertinc
>>>
>>
>>
>> ___
>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>>
>> iPexpert on YouTube: www.youtube.com/ipexpertinc
>>
>
> ___
> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>
> iPexpert on YouTube: www.youtube.com/ipexpertinc
>
>
>
> ___
> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>
> iPexpert on YouTube: www.youtube.com/ipexpertinc
>
___
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::

iPexpert on YouTube: www.youtube.com/ipexpertinc

Re: [OSL | CCIE_Voice] wireshark capture analysis

[Ramcharan Arya]

To access the VoIP calls analysis use the menu entry "Telephony->VoIP
Calls..."

http://wiki.wireshark.org/VoIP_calls

Thanks,
Ramcharan Arya
CCIE # 28926 (Voice/R&S)



On Sat, Jan 18, 2014 at 8:17 PM, virajith  wrote:

> Hello Guys,
>
> I have collected a Packet capture ( wireshark) from a cisco CME .  I need
> to know  following :-
>
>
> 1) The filters used on wireshark to see all traffic that passed between
> the ip phone  and the CME.
>
> 2) Would also like to  how to filter wireshark captures based on ip
> address  and  mac address of the phone .
>
>
> -Vir
>
>
>
>
>
> <http://sigads.rediff.com/RealMedia/ads/click_nx.ads/www.rediffmail.com/signatureline.htm@Middle?>
> Get your own *FREE* website, *FREE* domain & *FREE* mobile app with
> Company email.
> *Know More 
> >*<http://track.rediff.com/click?url=___http://businessemail.rediff.com/company-email-hosting-services?sc_cid=sign-1-10-13___&cmp=host&lnk=sign-1-10-13&nsrv1=host>
> ___
> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>
> iPexpert on YouTube: www.youtube.com/ipexpertinc
>
___
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::

iPexpert on YouTube: www.youtube.com/ipexpertinc

Re: [OSL | CCIE_Voice] Question About IPExpert OWLE Lab 1 - Question 4.3

[Ramcharan Arya]

Hi Michael,

Please update this parameter on H.323 gateway.

voice service voip
 allow-connections h323 to h323
 no supplementary-service h225-notify cid-update

Also there  is a service parameter under advanced under H.323 section can
achieve same results.

Regards,
Ramcharan Arya
CCIE # 28926 (Voice/R&S)



On Sun, Jan 5, 2014 at 2:45 PM, Michael Hall (michahal)
wrote:

>  In question 4.3, the last part of the requirement states that phones at
> Site C should always see "To +1408xxx" when they make TEHO calls to the
> Site B PSTN number.  To achieve this, I created a translation pattern of
> 9001.408XXX to +1408XX.  I then created a route pattern for +1408
> and pointed that the TEHO Route List.  When the call goes out Site B, the
> phone at Site C displays the called number as "To +14088397263", which is
> correct.  The problem is that when I shutdown the Site B GW and have the
> calls go out Site C, the phone goes back to displaying "To 90014088397263".
>  Any one have any ideas?
>
>  Thanks,
>
>  Mike
>
> ___
> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>
> iPexpert on YouTube: www.youtube.com/ipexpertinc
>
___
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::

iPexpert on YouTube: www.youtube.com/ipexpertinc

Re: [OSL | CCIE_Voice] NM-CUE integration with CUCM

[Ramcharan Arya]

Hi Chandan,

IPX 5 lab handbook have lab 1 through 5. In Vol 2 there are 10 labs. Vol 2
labs are good but I found 5 lab handbooks are very good.

I would recommend to work on IP Expert 5 labs handbooks lab those covers
very good scenario and improve you chance of passing.

Good Luck for your lab exam.

Thanks,
Ramcharan Arya
CCIE # 28926 (Voice/Routing & Switching)



On Wed, Dec 11, 2013 at 12:43 PM, Chandan Ug  wrote:

> Hi ,
>
> Any one passed CCIE voice in Lab 7 or Lab 8 - if yes kindly send me the
> solutions.
>
> Thank you
> Chandan
>
> On Tue, Dec 10, 2013 at 10:43 PM, Ramcharan Arya  > wrote:
>
>>  Check you WAN QoS policy. Fragmentation may cause this issue.
>>
>> Thanks
>> Ramcharan Arya
>> CCIE #28926(voice/R&S)
>>
>> Sent from my iPhone
>>
>> On Dec 9, 2013, at 6:02 PM, "Rahul Tapiawala"  wrote:
>>
>>
>>
>> Hello,
>>
>>
>>
>> I am trying to integrate NM-CUE (7.0.6) with CUCM (7.0.2) without success.
>>
>> Ports wont register as well as Jtapi user cant login. I have tried
>> everything suggested online
>>
>> as well as Cisco website. CUE can ping both PUB/SUB and vice versa.
>>
>>
>>
>> Has anyone encountered similar issue?
>>
>>
>>
>> Please advise. Thanks.
>>
>>  ___
>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>>
>> iPexpert on YouTube: www.youtube.com/ipexpertinc
>>
>>
>> ___
>> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>>
>> iPexpert on YouTube: www.youtube.com/ipexpertinc
>>
>
>
>
> --
> Thank you
> Chandan
>
___
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::

iPexpert on YouTube: www.youtube.com/ipexpertinc

Re: [OSL | CCIE_Voice] NM-CUE integration with CUCM

[Ramcharan Arya]

Check you WAN QoS policy. Fragmentation may cause this issue.

Thanks
Ramcharan Arya
CCIE #28926(voice/R&S)

Sent from my iPhone

> On Dec 9, 2013, at 6:02 PM, "Rahul Tapiawala"  wrote:
> 
>  
> Hello,
>  
> I am trying to integrate NM-CUE (7.0.6) with CUCM (7.0.2) without success.
> Ports wont register as well as Jtapi user cant login. I have tried everything 
> suggested online
> as well as Cisco website. CUE can ping both PUB/SUB and vice versa.
>  
> Has anyone encountered similar issue?
>  
> Please advise. Thanks.
> ___
> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
> 
> iPexpert on YouTube: www.youtube.com/ipexpertinc
___
Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::

iPexpert on YouTube: www.youtube.com/ipexpertinc

Re: [OSL | CCIE_Voice] Our FREE vLectures are back!

[Ramcharan Arya]

Hi Wayne,

One of the Data Center vLecture is schedule on 28th Nov Thanksgiving day.

Data Center: MDS FC Security Features (November 28th, 3 pm EST)

*(REGISTER) <http://www.ipexpert.com/Company/vlecture-registration>*
Is this still going to be happen on Thanksgiving day.? Is there any please
reschedule for another day.

Please let me know.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 (Voice/Routing & Switching)



On Fri, Oct 25, 2013 at 9:25 AM, Wayne Lawson
wrote:

> *Free CCIE Training! (Our vLectures Are 
> Back!)*<http://blog.ipexpert.com/2013/10/23/free-ccie-training-our-vlectures-are-back/?utm_source=rss&utm_medium=rss&utm_campaign=free-ccie-training-our-vlectures-are-back>
>
> Back by popular demand – our vLectures (free 1 to 2 hour training
> lectures) are now on the schedule, and free to anyone and everyone! A few
> things to note. First, these vLectures are done via our state of the art –
> Online-HD-ILT training solution. Secondly, if you’re unable to attend – we
> will be posting all vLectures on our YouTube channel – and linking to them
> from our website! *To REGISTER, please visit this link.
> <http://www.ipexpert.com/Company/vlecture-registration>*
>
> Here’s our vLecture schedule for the remainder of the year. We will be
> posting 2014 Q1 within the next few weeks.
>
>- Data Center: UCS Disjoint Layer 2 (October 28th, 3 pm EST) *(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>- R&S: MPLS 101 (Nov 6th, 10 am EST)*(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>- Collaboration / Voice. H.323 FastStart (November 8th, 4 pm 
> EST)*(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>- Security: Access Point 802.1x (Nov 13th, 10am EST) *(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>- Wireless: CAPWAP AP controller discovery process  (November 18th, 1
>pm EST) *(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>- Data Center: EvPC and FCoE (November 18th, 3 pm EST)*(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>- Data Center: MDS FC Security Features (November 28th, 3 pm 
> EST)*(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>- Security: IKEv2 L2L VPN (Dec 4th, 10am EST) *(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>- R&S: Multicast basics (Dec 6th, 10 am EST) *(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>- Collaboration / Voice: 3750 Quality of Service (December 6th, 4 pm
>EST)*(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>- Wireless: Troubleshooting the CAPWAP AP Join process (December 9th,
>1 pm EST) *(REGISTER)
><http://www.ipexpert.com/Company/vlecture-registration>*
>
> The following 2 vLectures are available now – for viewing (delivered last
> week):
>
> *Security: ISE Profiling – Device Sensor
> <http://www.youtube.com/watch?v=h571K91GWCA&feature=youtu.be>*
>
> *R&S:  <http://www.youtube.com/watch?v=mGblyTKAGIk>Private VLANs –
> Configuration, Operation and Troubleshooting
> <http://www.youtube.com/watch?v=mGblyTKAGIk>*
>
>
> Regards,
>
>
>
> Wayne A. Lawson II - CCIE #5244
>
> Founder & CEO - IPexpert, Inc.
>
>
> :: Message sent from iPhone
>
> On Oct 25, 2013, at 6:02 AM, Bill Hatcher  wrote:
>
> Stefano,
>
> When you go to that URL with your browser, using Internet Explorer go to
> view and source.  This will allow you to see the xml format on the page.
> You should be able to edit from that.
>
> Bill Hatcher
>
>
> On Thu, Oct 24, 2013 at 8:08 AM, StefanoS  wrote:
>
>> Hey Somphol thank you for your reply.
>>
>> You mean this?:
>> http://:8080/ccmcip/xmldirectory.jsp
>> There must be something that we have to add in this URL I believe because
>> as it is doesn't show anything. I remember something similar but I can't
>> figure it out right now. I'm exercising on something else. So if you can
>> explain further it would be perfect :)
>>
>> I added the IP Phone Customization links for things like XML writing,
>> Background changes for the 7965 etc
>>
>> Stefanos
>>
>>
>> On Thu, Oct 24, 2013 at 3:53 PM, Somphol Boonjing wrote:
>>
>>> Hi StefanoS,
>>>
>>> Just a tiny addition on the good collection of the link you've gathered,
>>> with the long navigation to Cisco IP Phone customization, you may want to
>>> get the the template f

Re: [OSL | CCIE_Voice] Voice Lab dates all gone?

[Ramcharan Arya]

Hi Bill,

You can  open a support case with Cisco Certification support team
www.cisco.com/go/certsupport. they might be able to assist you if any dates
available.

I had similar issue in 2009 when R&S blueprint 4.0 change announced.

Thanks,
Ramcharan Arya
CCIE # 28926 (Voice/Routing & Switching)



On Wed, Oct 30, 2013 at 4:21 PM, Bill Tolentino wrote:

> Hello everyone,
> Kind of off topic for most as I'm sure none of you waited until today to
> schedule/pay for your voice lab, unlike myself.  I just wanted to confirm
> from someone else that has access to the online scheduling site.
> Two days ago there were 8 seats left in San Jose.  Last night there was
> 5.  This morning at 7am Pacific (Wed Oct 30th, 2013) there were no seats
> left in San Jose.  Fine, I looked up other sites and RTP had about 5-6
> seats (within the next 10 days).  Tokyo had about 8 or so.  Bangalore had
> many open seats (20+) over the next three months.  I think Vancouver had
> one seat.  Then at approximately 7:10am they were all gone.  I have been
> re-checking all day and still no dates for any sites.?  Technically someone
> can be dropped from their 90+ day reservation date over the next 2 weeks
> and a slot may open, assuming they have not yet paid.  Then there's a slim
> shot at sneaking in...  Can someone confirm all slots have been filled?
>
> Thanks,
>
> Bill Tolentino
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Outbound PSTN call drops

[Ramcharan Arya]

Hi,

What is the settings in your gateway CUCM configuration. Have you checked
early offer option.

Please send debug of following command.


debug voip ccapi inout

debug h225 q931

debug h245 asn1

Thanks,
Ramcharan Arya CCIE # 28926 (Voice/R&S)




On Mon, Oct 21, 2013 at 12:32 PM, Samson Kareem
wrote:

> Hi All,
>
> I am hitting an issue where outbound PSTN calls are failing after the call
> initially seems to setup ok.
> Then the H323 gateway sends a disconnect to the PSTN and the call drops as
> per below.
>
>
> Oct 21 16:42:59.876: ISDN Se0/3/0:15 Q931: TX -> SETUP pd = 8  callref =
> 0x008C
> Bearer Capability i = 0x8090A3
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA98383
> Exclusive, Channel 3
> Display i = 'Tobias Funke'
> Calling Party Number i = 0x1181, '17707022001'
> Plan:ISDN, Type:International
> Called Party Number i = 0x91, '97148037333'
> Plan:ISDN, Type:International
> Oct 21 16:42:59.908: ISDN Se0/3/0:15 Q931: RX <- CALL_PROC pd = 8  callref
> = 0x808C
> Channel ID i = 0xA98383
> Exclusive, Channel 3
> Oct 21 16:42:59.916: ISDN Se0/3/0:15 Q931: RX <- ALERTING pd = 8  callref
> = 0x808C
> Progress Ind i = 0x8188 - In-band info or appropriate now available
> Oct 21 16:42:59.944: ISDN Se0/3/0:15 Q931: TX -> DISCONNECT pd = 8
> callref = 0x008C <<==
> Cause i = 0x80AF - Resource unavailable, unspecified
> Oct 21 16:42:59.952: ISDN Se0/3/0:15 Q931: RX <- RELEASE pd = 8  callref =
> 0x808C
> Oct 21 16:42:59.956: ISDN Se0/3/0:15 Q931: TX -> RELEASE_COMP pd = 8
> callref = 0x008C
>
>
> I first thought it was a DSP resource issue as the disconnect cause is
> Cause i = 0x80AF - Resource unavailable, unspecified
> but I checked the status of DSPs using #show voice dsp group all and no
> problems there.
>
> I found an old post from OSL Nov 2011 where someone suggested a codec
> mismatch with the H245 negotiation which causes
> the call to drop immediately after the alerting message.
>
> The thing is I have a voice class codec configured and in any case, the
> gateway was originally an MGCP gateway and calls were failing with the same
> ISDN disconnect cause (I only changed it to a H323 g/w for troubleshooting
> purposes).
>
> I tried using debug cch323 h245 and have pasted the output received after
> the ISDN alerting message below. I believe this is when codec negotiation
> takes place on the voip leg of the call between CUCM and the g/w.
>
> Oct 21 16:25:16.653:
> //51/8043215D0100/H323/cch323_h245_channel_established_ind: Using fd=4 to
> send msgs
> Oct 21 16:25:16.653:
> //51/8043215D0100/H323/cch323_send_event_to_h245_connection_sm: Changing to
> new event H245_ESTABLISHED_EVENT
> Oct 21 16:25:16.653: //51/8043215D0100/H323/cch323_h245_connection_sm:
> H245_LISTEN: Received event H245_ESTABLISHED_EVENT while at H245_WAITING
> state
> Oct 21 16:25:16.653: //51/8043215D0100/H323/cch323_h245_set_new_state:
> Changing from H245_WAITING state to H245_CONNECTED state
> Oct 21 16:25:16.653: //51/8043215D0100/H323/run_h245_iwf_sm: received
> IWF_EV_H245_CONNECTED while at state IWF_IDLE
> Oct 21 16:25:16.653: //51/8043215D0100/H323/h245_iwf_set_new_state:
> changing from IWF_IDLE state to IWF_AWAIT_CAP_MSD_RESP state
> Oct 21 16:25:16.657: //51/8043215D0100/H323/cch323_run_h245_cap_out_sm:
> Received H245_EVENT_CAP_REQ while at state IDLE
> Oct 21 16:25:16.657: //51/8043215D0100/H323/h245_cap_out_set_new_state:
> changing from IDLE state to AWAITING_RESPONSE state
> Oct 21 16:25:16.657: //51/8043215D0100/H323/cch323_run_h245_ms_sm:
> Received event H245_EVENT_MSD while at state H245_MS_NONE
> Oct 21 16:25:16.657: //51/8043215D0100/H323/cch323_run_h245_ms_sm: Sent
> MSD Request
> Oct 21 16:25:16.657: //51/8043215D0100/H323/h245_ms_set_new_state:
> Changing from H245_MS_NONE state to H245_MS_OUTGOING_WAIT state
>
> does anyone have any pointers?
>
> thanks
> Samson
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Fwd: CME as SRST help.

[Ramcharan Arya]

This is one of the best blog written by Vik on SRST it covers all details.


http://blog.ipexpert.com/2012/03/12/high-availability-series-3-unified-cme-for-srst-gotchas/

Thanks,
Ramcharan Arya CCIE # 28926 (Voice/Routing & Switching)



On Thu, Oct 17, 2013 at 11:05 AM, Martin Sloan wrote:

> Bill,
>
> Here's a great reference for CME MWI:
>
> http://ciscovoiceguru.com/518/cue-mwi-notification-methods/
>
> I've used this a lot through my studies.
>
> @Ramcharan - good call.  I think the symptom with that bug is that the
> phones will register but display no DN's and if you issue 'show ephone reg'
> it will show the DN's as 'invalid' or something like that.  I have also hit
> the other bug with SC MGCP after coming out of SRST the dial-peers are
> still chosen on inbound calls from the PSTN.  I believe the fix for that is
> to globally set 'voice hunt 2' and under the ephone-dn's assign a higher
> preference (I use 9).
>
>
> On Thu, Oct 17, 2013 at 11:53 AM, Bill Hatcher wrote:
>
>> Ok, I figured out my issue with the MWI not coming on in SRST more.  Need
>> to ass the key word unsolicited to the mwi-server command.
>>
>> Now to get the CME-SRST working.
>>
>>
>>
>> On Thu, Oct 17, 2013 at 10:36 AM, Bill Hatcher wrote:
>>
>>> Seifeddine,
>>>
>>> I've run that debug, but there is absolutly no output when I'm using
>>> CME-SRST.
>>>
>>> Bill
>>>
>>>
>>> On Thu, Oct 17, 2013 at 10:30 AM, Seifeddine Tlili <
>>> seifeddine.tl...@lvs1.com> wrote:
>>>
>>>>  Can you send the output of debug ephone register?
>>>>
>>>> ** **
>>>>
>>>> Thx
>>>>
>>>> ** **
>>>>
>>>> *Kindly***
>>>>
>>>> * *
>>>>
>>>> *Seifeddine Tlili*  
>>>>
>>>> [image: Description: Description: Long View Systems]
>>>>
>>>> M.Eng CCIE # 26440
>>>> Systems Consultant 
>>>>
>>>> .. *
>>>> Direct:* 403.387.3069 | *Mobile:* 403.973.4840 | *Main:* 403.515.6900
>>>>
>>>> [image: Description: Description: 
>>>> Linkedin]<http://www.linkedin.com/company/17908>
>>>>  [image: Description: Description: 
>>>> Twitter]<http://twitter.com/LongViewSystems>
>>>>  [image: Description: Description: 
>>>> Facebook]<http://www.facebook.com/longviewsystems> [image:
>>>> Description: Description: Facebook]<http://www.youtube.com/longviewsystems>
>>>> www.longviewsystems.com
>>>> This message and any attached documents are only for the use of
>>>> the intended recipient(s), are confidential and may contain privileged
>>>> information. Any unauthorized review, use, retransmission, or other
>>>> disclosure is strictly prohibited. If you have received this message in
>>>> error, notify the sender immediately, and delete the original message.
>>>> 
>>>>
>>>> ** **
>>>>
>>>> ** **
>>>>
>>>> ** **
>>>>
>>>> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
>>>> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Bill Hatcher
>>>> *Sent:* Thursday, October 17, 2013 9:29 AM
>>>> *To:* ccievoice
>>>> *Subject:* [OSL | CCIE_Voice] Fwd: CME as SRST help.
>>>>
>>>> ** **
>>>>
>>>> Marty,
>>>>
>>>> The weird thing is they work when I use call-manager-fallback.  Looking
>>>> at the cnf file, all seems well.
>>>>
>>>> ** **
>>>>
>>>> On Thu, Oct 17, 2013 at 10:05 AM, Martin Sloan 
>>>> wrote:
>>>>
>>>> I had a similar issue recently which ended up being a DB replication
>>>> problem.  You could check the phones config file:
>>>>
>>>> 10.10.210.11:6970/SEP123456789123.cnf.xml> Check
>>>> subscribers copy of the file
>>>>
>>>> Right-click, select view source and search for 'srst' and see what it
>>>> has there.  I could be missing something but it looks like you have enough
>>>> to get them registered.
>>>>
>>>> Marty
>&

Re: [OSL | CCIE_Voice] CME as SRST help.

[Ramcharan Arya]

Hi Bill,

I believe this might be related to a bug with using octo lines in CME SRST.

Come out of SRST and reload the router this might resolve the issue.

Regards,
Ramcharan Arya CCIE # 28926 ( Voice/Routing & Switching)




On Thu, Oct 17, 2013 at 9:34 AM, Bill Hatcher  wrote:

> It’s not working!!  Can anyone see something I may be doing wrong? My PRI
> and CUE register, I can even see SIP MWI being sent, but my phones will not
> register.  They worked when I was using call-manager-fallback though so I
> know my SRST configuration is correct on the CallManager.
>
>
>
> telephony-service
>
>  srst mode auto-provision all
>
>  srst ephone description auto provisioned ephone  : Oct 17 2013 14:47:07
>
>  srst dn line-mode octo
>
>  max-ephones 4
>
>  max-dn 4
>
>  ip source-address 10.10.202.1 port 2000
>
>  max-conferences 12 gain -6
>
>  transfer-system full-consult
>
>  create cnf-files version-stamp 7960 Oct 17 2013 16:07:18
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] ccie written

[Ramcharan Arya]

Hi Karen,

When I passed my CCIE voice written exam after that my CCIE R&S
automatically got renewed.


Regards,
Ramcharan Arya CCIE # 28926 ( Voice/Routing & Switching)





On Mon, Oct 7, 2013 at 12:19 PM, Karen Johnson wrote:

> hi Arya and all,
>
> when you have 2 ccie specialization, do you need to write WRITTEN exam
> for both or just one ?
>
> K
>
>   *From:* Ramcharan Arya 
> *To:* Josh Petro 
> *Cc:* "ccie_voice@onlinestudylist.com" ;
> sanity insanity 
> *Sent:* Wednesday, October 2, 2013 6:59:08 PM
> *Subject:* Re: [OSL | CCIE_Voice] Presence - on hook and off hook status
>
>   Hi Josh,
>
> I do not believe it is related to vmware environment. I am assuming your
> CUPS is integrated with CUCM using SIP trunk.
>
> Can you enable SIP debug level to detail and run collect SIP debug logs (
> on primary call processing engine i.e. Sub) and check SIP logs  why there
> is delay in status.?
>
> Im my home lab I never had this issue it works almost instantly my CUPS
> client is installed on UCCX server.
>
> Regards,
> Ramcharan Arya CCIE # 28926 ( Voice/R&S)
>
>
>
>  On Wed, Oct 2, 2013 at 7:47 PM, Josh Petro  wrote:
>
> I have a huge delay in my presence updates on my system. Im assuming
> that's from CUPS being installed in my lab vmware environment though.
> Try to go off hook or call a pstn number and let it sit for 1-2 minutes. If
> anyone knows how to fix the lag, please let me know. Im assuming its
> related to vmware.
> Josh
>  On Oct 1, 2013 11:20 AM, "Ovidiu Popa"  wrote:
>
>  Hi
>
> You could try a reboot of the CUPS server. Worked for me a couple of
> times...
>
> Cheers,
> Ovidiu
>
>
> On Tue, Oct 1, 2013 at 4:43 PM, Martin Sloan wrote:
>
>  Hi MJ,
>
> Is the end user assigned on the line level of the hard phone?  That
> assignment is unique per line appearance so if you make the association on
> the CUPC device it does not automatically populate to the hard phone/any
> other line appearance.  When the phone goes off-hook CUCM checks the end
> user assignment for that appearance and if there is an end user assigned it
> check whether that end user is assigned CUP licensing to decide if the
> publish message is sent over the CUPS SIP trunk.
>
> BR,
> Marty
>
>
>  On Tue, Oct 1, 2013 at 10:29 AM, sanity insanity <
> networksanitytoinsan...@gmail.com> wrote:
>
> Hello all,
>
> I have configured presence and both softphone and deskphone modes , IM
> and voicemail is working fine on the clients
>
> However I have a question when I lift the handset of the phone ( hard
> phone ) that is assoicated
> with the CUPC clients . I see that the presence status does not show  "
> On the phone "  and does not turn yellow.
>
> I have tried reseting my sip trunk pointing to the presence server yet I
> see the same issue.
>
> Please let me know what can be done to fix this ?  Also is this  a major
> issue ?
>
> -MJ
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit http://www.ipexpert.com/
>
> Are you a CCNP or CCIE and looking for a job? Check out
> http://www.platinumplacement.com/
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit http://www.ipexpert.com/
>
> Are you a CCNP or CCIE and looking for a job? Check out
> http://www.platinumplacement.com/
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit http://www.ipexpert.com/
>
> Are you a CCNP or CCIE and looking for a job? Check out
> http://www.platinumplacement.com/
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit http://www.ipexpert.com/
>
> Are you a CCNP or CCIE and looking for a job? Check out
> http://www.platinumplacement.com/
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Issues in opening the workbook and accessing my account

[Ramcharan Arya]

Hi,

I am able to access my account and able to open workbook successfully.

Have you updated your Adobe reader recently if yes then you might have to
install correct fileopen plug-in.

Thanks,
Ramcharan Arya CCIE # 28926(Voice/Routing & Switching)



On Sat, Oct 5, 2013 at 8:04 AM, Vignesh Sethuraman
wrote:

> Dear All,
>
> I am facing issue in opening the PDF workbook and accessing my account in
> ipexpert today.
>
> I tried to send e-mail to supp...@ipexpert.com but still waiting for the
> answer.
>
> Just wanted to ensure if this problem exists only for me or to every
> ipexpert customer.
>
> Thanks,
> Viki
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] unity connection - transfer option for users.

[Ramcharan Arya]

Hi Marty,

In order to preserve Original calling party TON you have to consider
existing route pattern should not override  so two possible ways to achieve
this you can try to use a translation patter which evaluation prior to
route pattern. Let us assume you prefix some additional character and
create clng party x-formation pattern and DDI -predot what was prefix in TP
and set appropriate plan and type. Use separate pt/css for clng party
x-formation pattern.

Another option is using application dial-rule can also use for this.

Regards,
Ramcharan Arya CCIE # 28926 (Voice/Routing & Switching)


On Wed, Oct 2, 2013 at 12:53 PM, Martin Sloan wrote:

> Yeah, I wasn't sure on that one either and had to test it out.  I can't
> recall what the exact requirement, if any, for calling party TON was on the
> 'practice test' that I had with a similar task but I'm thinking the only
> way to properly set the calling TON would be with Xforms on the port level
> since it could be any number on the PSTN phone, even the number you're
> trying to dial out to from VM.  They'd have to be very specific Xforms
> though since it could potentially override the current dial-plan
> manipulations in RL and RP if general masks are used like 10 X's.
>
>
> On Wed, Oct 2, 2013 at 1:21 PM, Justin Carney 
> wrote:
>
>> I wasn't sure RDNIS would matter here but figured I would throw it out
>> there anyway (as it applies when redirecting TO CUC).  It seems the unity
>> service parameter mentioned earlier obviates the need to use RDNIS.
>>
>> With the option you proposed on creating a new RP/RL just for this
>> requirement I would just set the digit manipulation/TON on the RL to
>> whatever you see inbound from that specific PSTN ANI to HQ - unless the
>> question told you what the expected outbound ANI/TON should be.  Another
>> option would be to compare the original PSTN number with the destination
>> PSTN and set to local if same NPA, LD if different NPA, or international
>> different country codes.  If it comes in unknown/unknown then send it back
>> out that way.
>>
>>
>> On Wed, Oct 2, 2013 at 12:48 PM, Martin Sloan wrote:
>>
>>> The RDNIS shouldn't be a factor here.  I just labbed this up and there
>>> is no Redirecting Number IE in the ISDN messages for this scenario.  It's
>>> more of a straight dial from Unity.
>>>
>>> I think the places to be checked are:
>>>
>>> CUCM service parameter
>>> Call Routing Path
>>>
>>> Whatever Route Pattern -> Route List is being used needs to have the
>>> "Use Calling Party's External Phone Number Mask" checked and no masking
>>> being done below, like truncating the calling party number to 7 digits if
>>> that was part of the requirement for the sites local PSTN dialing.  I
>>> recommend partitioning out a new pattern that matches the number you're
>>> trying to dial and handling the digit manipulation separately from the rest
>>> of the dial plan to keep it conceptually simple, but not necessarily
>>> 'cleaner'.  Kind of along the lines of keeping AAR, CFUR, SNR separate.
>>>
>>> As for the calling party TON on this, your guess is as good as mine.  If
>>> the task doesn't specifically ask to set the calling party TON and it says
>>> to use any line from the PSTN phone, what do you do?
>>>
>>> Marty
>>>
>>>
>>> On Wed, Oct 2, 2013 at 12:14 PM, Justin Carney <
>>> justin.s.car...@gmail.com> wrote:
>>>
>>>> What do you see on the voice gateway for ANI/DNIS of the two separate
>>>> calls - inbound (PSTN to Phone (which is then CFNA to CUC)) and outbound
>>>> (CUC to PSTN alt dest 9515)?
>>>>
>>>> Take a look your gateways settings for "Redirecting Number IE Delivery"
>>>> (RDNIS) for both inbound/outbound.  These checkboxes are adjacent to the
>>>> "Display IE Delivery" (which is usually turned on).
>>>>
>>>> To test and understand the behavior of these settings I would recommend
>>>> ticking these boxes on/off and retrying your inbound/outbound calls in this
>>>> (and other) scenario.  As a test try setting up a call such as PSTN > SA
>>>> phone > CFA to a different PSTN number and look at the q931 debugs for
>>>> ANI/DNIS/RDNIS.
>>>>
>>>> I haven't tested this recently and not sure if it applies in your
>>>> stated scenario but try checking the box on SA gateway for the outbound
>>>

Re: [OSL | CCIE_Voice] Presence - on hook and off hook status

[Ramcharan Arya]

Hi Josh,

I do not believe it is related to vmware environment. I am assuming your
CUPS is integrated with CUCM using SIP trunk.

Can you enable SIP debug level to detail and run collect SIP debug logs (
on primary call processing engine i.e. Sub) and check SIP logs  why there
is delay in status.?

Im my home lab I never had this issue it works almost instantly my CUPS
client is installed on UCCX server.

Regards,
Ramcharan Arya CCIE # 28926 ( Voice/R&S)



On Wed, Oct 2, 2013 at 7:47 PM, Josh Petro  wrote:

> I have a huge delay in my presence updates on my system. Im assuming
> that's from CUPS being installed in my lab vmware environment though. Try
> to go off hook or call a pstn number and let it sit for 1-2 minutes. If
> anyone knows how to fix the lag, please let me know. Im assuming its
> related to vmware.
> Josh
> On Oct 1, 2013 11:20 AM, "Ovidiu Popa"  wrote:
>
>> Hi
>>
>> You could try a reboot of the CUPS server. Worked for me a couple of
>> times...
>>
>> Cheers,
>> Ovidiu
>>
>>
>> On Tue, Oct 1, 2013 at 4:43 PM, Martin Sloan wrote:
>>
>>> Hi MJ,
>>>
>>> Is the end user assigned on the line level of the hard phone?  That
>>> assignment is unique per line appearance so if you make the association on
>>> the CUPC device it does not automatically populate to the hard phone/any
>>> other line appearance.  When the phone goes off-hook CUCM checks the end
>>> user assignment for that appearance and if there is an end user assigned it
>>> check whether that end user is assigned CUP licensing to decide if the
>>> publish message is sent over the CUPS SIP trunk.
>>>
>>> BR,
>>> Marty
>>>
>>>
>>> On Tue, Oct 1, 2013 at 10:29 AM, sanity insanity <
>>> networksanitytoinsan...@gmail.com> wrote:
>>>
>>>> Hello all,
>>>>
>>>> I have configured presence and both softphone and deskphone modes , IM
>>>> and voicemail is working fine on the clients
>>>>
>>>> However I have a question when I lift the handset of the phone ( hard
>>>> phone ) that is assoicated
>>>> with the CUPC clients . I see that the presence status does not show
>>>> "  On the phone "  and does not turn yellow.
>>>>
>>>> I have tried reseting my sip trunk pointing to the presence server yet
>>>> I see the same issue.
>>>>
>>>> Please let me know what can be done to fix this ?  Also is this  a
>>>> major issue ?
>>>>
>>>> -MJ
>>>>
>>>> ___
>>>> For more information regarding industry leading CCIE Lab training,
>>>> please visit www.ipexpert.com
>>>>
>>>> Are you a CCNP or CCIE and looking for a job? Check out
>>>> www.PlatinumPlacement.com
>>>>
>>>
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Unity express

[Ramcharan Arya]

You need to figure out how to access CUE using CLI.

ssh/telnet into your router
type below command ( depend up on module)

service-module service-engine x/y session

once you have to CUE using CLI then run debug command.






On Thu, Sep 19, 2013 at 3:18 PM, Dharambir kumar varma <
dharambi...@gmail.com> wrote:

> sir i dont have access on CME ...
> but we can acess only cue through GUI...
> is there any other way???
> i am confused about IMAP..it shows '' no active IMAP session"
>
> but i have configured all parameters on CUE
> Lke SMTP setting /Domain setting/User notification enable/user email
> address.
> is anything requiredto configure on exchange server side...
>
> please suggest where can i find info.
>
> Thanks
>
>
> On 9/20/13, Ramcharan Arya  wrote:
> > Can you send below command output from CUE CLI.
> >
> > trace networking smtp all
> >
> >
> >
> > Thanks,
> > Ramcharan Arya CCIE # 28926 (Voice/Routing & Switching)
> >
> >
> >
> >
> > On Thu, Sep 19, 2013 at 12:35 PM, Dharambir kumar varma <
> > dharambi...@gmail.com> wrote:
> >
> >> Hi All,
> >>
> >> users are not getting voice mail notification on email..
> >> please guide...
> >> --
> >>  Regards,
> >>  Dharambir Kumar
> >> ___
> >> For more information regarding industry leading CCIE Lab training,
> please
> >> visit www.ipexpert.com
> >>
> >> Are you a CCNP or CCIE and looking for a job? Check out
> >> www.PlatinumPlacement.com
> >>
> >
>
>
> --
>  Regards,
>  Dharambir Kumar
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Unity express

[Ramcharan Arya]

Can you send below command output from CUE CLI.

trace networking smtp all



Thanks,
Ramcharan Arya CCIE # 28926 (Voice/Routing & Switching)




On Thu, Sep 19, 2013 at 12:35 PM, Dharambir kumar varma <
dharambi...@gmail.com> wrote:

> Hi All,
>
> users are not getting voice mail notification on email..
> please guide...
> --
>  Regards,
>  Dharambir Kumar
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CCIE collaboration written - official study material availability

[Ramcharan Arya]

Hi,

Can someone please tell me about timeline when collaboration study material
will be available.

Regards,
Ramcharan Arya
CCIE # 28926 ( Voice/Routing & Switching)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] SIP Early offer

[Ramcharan Arya]

Just go through this SRND article this might be useful.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/trunks.html#wp1045957

If you have IPX 5 lab handbooks CCIE-Voice-5-Lab-Handbook-
-Workbook-Lab-5.pdf sec 4.5 SIP Trunk Troubleshooting Vik has covered  SIP
trunk troubleshooting explanation in great detail.

HTH

Thanks,
Ramcharan Arya- CCIE # 28926 ( Voice/Routing & Switching)



On Wed, Aug 7, 2013 at 9:34 PM, Karen Johnson wrote:

> IOS mtp, i understand the explicit mtp from ucm.
>
> but this must used IOS mtp , because if I do not put MGRL that only
> contacin IOS MTP and not check MTP in trunk, i will not work as Early.
>
> K
>
>   *From:* Rafael Chavantes 
> *To:* Karen Johnson 
> *Cc:* ccie_voice@onlinestudylist.com
> *Sent:* Wednesday, August 7, 2013 2:11:28 PM
> *Subject:* Re: [OSL | CCIE_Voice] SIP Early offer
>
>  Are you using mtp on ios or on cucm?
> Remember that for early offer you can use the software mtp on cucm
> Also remember that if cucm mtps are not associated to any Mrg, they reside
> on the none mrg, and be used even if not explicity selected on any mrg
> Em 07/08/2013 15:19, "Karen Johnson"  escreveu:
>
>
> all,
>
> when i check MTP in SIP trunk and use MRGL, call become SIP Early offer.
> However why if I do " sh sccp connection " , I did not see SIP Early offer
> use my MTP resource at all?
>
> K
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit http://www.ipexpert.com/
>
> Are you a CCNP or CCIE and looking for a job? Check out
> http://www.platinumplacement.com/
>
>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] NO Extension in CME-SRST

[Ramcharan Arya]

Check your WAN QOS  one-way compression might be causing this.

Regards,
Ramcharan Arya - CCIE # 28926 ( Voice/Routing & Switching)



On Thu, Aug 1, 2013 at 8:27 PM, Amdo Ngawa  wrote:

> I am having similar issue. No resolution so far? Will read and google.
>
> Thanks
>
>
> On Thu, May 16, 2013 at 4:21 PM, CISCO CCIE VOICE 
> wrote:
>
>> HI experts,
>>
>> When the Phones are in CME SRST its does not shows Extension on Phone
>> display this  happens when  i change the name +86223033001 to SiteC Phone 1
>> under Ephone-dn's
>>
>> Thnks
>>
>>
>>
>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] !!End users permissions and groups!!

[Ramcharan Arya]

Hi,

IMO you may  want to avoid giving AXL Admin permission to end users.

Regards,
Ramcharan Arya - CCIE # 28926 (Voice/Routing & Switching)



On Thu, Aug 1, 2013 at 7:45 PM, Drake J  wrote:

> Hello All,
>
> In the callmanger If the end users are already created such as HQ1, HQ2.,
> HQ3, SB1 and so on ... and if we add all  roles  and and groups to them
> under permissions  then will this be wrong or should not be done ? Could
> someone comment on this? Are we allowed to  do this?
>
> -Drake
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] uccx script : get reporting statistics playing negative value

[Ramcharan Arya]

Hi,

My UCCX script playing negating output value from get reporting statistics.


Can someone please give expert advice what could be wrong in uccx script
which result into negative output.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 (R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] AAR and uccx

[Ramcharan Arya]

Hi Piyush,

I assigned HQ device pool and location setting on CTI route point and CTI
ports to HQ.

Following is isdn debug output when calling from 4002 to 4000 ( during AAR)

HQ(config)#
Jul 10 22:15:08.149: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callref =
0x000F
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98397
Exclusive, Channel 23
Calling Party Number i = 0x1181, '85224044011'
Plan:ISDN, Type:International
Called Party Number i = 0x91, '85224044102'
Plan:ISDN, Type:International
Jul 10 22:15:08.201: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8  callref
= 0x800F
Channel ID i = 0xA98397
Exclusive, Channel 23
HQ(config)#
Jul 10 22:15:08.329: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8  callref =
0x800F
Progress Ind i = 0x8088 - In-band info or appropriate now available
Jul 10 22:15:08.341: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8  callref
= 0x000F
Cause i = 0x8290 - Normal call clearing

Site C phone 2 Line 2 4102 ring and call disconnect in 2 sec.

with below error message

Jul 10 22:16:48.524: ISDN Se0/0/0:15 Q931: TX -> SETUP pd = 8  callref =
0x0048
Sending Complete
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA9838B
Exclusive, Channel 11
Display i = 'SiteC Phone 2'
Calling Party Number i = 0x1183, '+85224044002'
Plan:ISDN, Type:International
Called Party Number i = 0x91, '85224044010'
Plan:ISDN, Type:International
Jul 10 22:16:48.524: ISDN Se0/0/0:15 Q931: TX -> RELEASE pd = 8  callref =
0x80D5
Jul 10 22:16:48.780: ISDN Se0/0/0:15 Q931: RX <- STATUS pd = 8  callref =
0x00D5
Cause i = 0x80E202 - Message not compatible with call state or not
implemented
Call State i = 0x0C
Jul 10 22:16:48.780: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8  callref =
0x8047
Jul 10 22:16:48.780: ISDN Se0/0/0:15 Q931: RX <- RELEASE_COMP pd = 8
callref = 0x00D5

Basically when calling from HQ PH1 to 4000 ( in AAR) it work without any
issue.


Thanks,
Ramcharan Arya



On Tue, Jul 9, 2013 at 10:37 PM,  wrote:

> Hello Ram,
>
> You can assign Hq device pool and location setting to cti route point and
> cti ports..
> And assign site c device pool and location to site c phones...
>
> Regards,
> Piyush Jain
>
> Sent from my android device.
>
>
>
>
> -Original Message-
> From: Ramcharan Arya 
> To: "ccie_voice@onlinestudylist.com" 
> Sent: Tue, 09 Jul 2013 7:59 AM
> Subject: [OSL | CCIE_Voice] AAR and uccx
>
> Hi,
> I have a CTI Route point 4000 and two CTI port 410x and 410y
>
>
>
> SiteC Phone 1 and SC Phone 2 are in CSQ which is assign to application and
> associated with trigger.
>
> Due to  RSVP when call exceed ip rsvp bandwidth call  from uccx to site
> Phones should use AAR and to over PSTN.
>
> My doubts are .
>
> What should be local and device pool of CTI ports so it should work in AAR
> when PSTN caller make call to CTI route point number 4000.
>
> Can someone please advice about this.
>
> Thanks,
> Ramcharan Arya
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] AAR and uccx

[Ramcharan Arya]

Hi,
I have a CTI Route point 4000 and two CTI port 410x and 410y



SiteC Phone 1 and SC Phone 2 are in CSQ which is assign to application and
associated with trigger.

Due to  RSVP when call exceed ip rsvp bandwidth call  from uccx to site
Phones should use AAR and to over PSTN.

My doubts are .

What should be local and device pool of CTI ports so it should work in AAR
when PSTN caller make call to CTI route point number 4000.

Can someone please advice about this.

Thanks,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CUCM Privacy button display as 'Private' Is this a bug.?

[Ramcharan Arya]

Hello,

When I assign a privacy button on HQ phone. my display show private not
privacy as per label.Is this a cosmetic bug in CUCM.?

Can someone please confirm.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 (R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CME Date-format in SRST show mm/dd/yy

[Ramcharan Arya]

Hi,
I have some issue with date-format for SC phones.

On CUCM date-format is mm-dd-yy

When site C is in SRST mode. phone date-format change to mm/dd/yy.

I have specify  date-format  in telephony-service

date-format mm-dd-yy

I have recreate CNF files for phones phone in SRST always show date format

can someone please suggest what is the correct way to keep date-formate
mm-dd-yy while phones are in SRST mode.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 ( R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] H323 fast start question

[Ramcharan Arya]

According my interpretation If requirement say "collecting CUCM traces"
then you might want to think about using RTMT tool for logs.

Debug h225 ans1 command you can run output on IOS router which does not
gives an output from CUCM trace.


On Mon, Jun 3, 2013 at 8:06 PM, singh  wrote:

>
> HI All,
>
> If we are required to setup fast between H323 gateway and callmanger and
> indicate the ...
>
> a) Inbound fast start to CUCM
> b) Outbound fast start from CUCM
>
>
> Can we therefore just collect "debug h225 asn1" and indicate the above ?
> or is it required to demonstrate this by collecting CUCM traces ?
>
>
> -singh
>
>
> Get Yourself a cool, short *@in.com* Email ID 
> now!
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Cisco: Provide a reasonable transition path from CCIE Voice to CCIE Collaboration

[Ramcharan Arya]

I signed as well.

Thanks,
Ramcharan Arya CCIE # 28926 ( R&S)



On Fri, May 31, 2013 at 9:09 PM, Ikenna Izugbokwe <
ikenna.izugbo...@gmail.com> wrote:

> Done.
>
> Ikenna Izugbokwe
> Former - CCIE #36,472 (Voice)
>
>
> On Fri, May 31, 2013 at 8:40 PM, Tian  wrote:
>
>> DONE…
>>
>> ** **
>>
>> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
>> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Edgar Feliz
>> *Sent:* Friday, May 31, 2013 1:36 PM
>> *To:* Suresh Bhandari
>> *Cc:* ccie_voice@onlinestudylist.com
>> *Subject:* Re: [OSL | CCIE_Voice] Cisco: Provide a reasonable transition
>> path from CCIE Voice to CCIE Collaboration
>>
>> ** **
>>
>> DONE...My wife also posted it on FB.
>>
>> ** **
>>
>> On Fri, May 31, 2013 at 12:40 AM, Suresh Bhandari 
>> wrote:
>>
>> *Cisco: Provide a reasonable transition path from CCIE Voice to CCIE
>> Collaboration *- Sign the Petition!
>>
>> For the interested candidates...
>>
>> Please join this campaign: http://chn.ge/17A0zXE 
>>
>> I already did. Now its your turn.
>>
>> Initially shared by Martin Sloan (martinsloa...@gmail.com)
>> 
>>
>>
>> --
>> Suresh Bhandari
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>> ** **
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
>
> --
> I
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Unity Connection Restriction Tables setting for External Transfer

[Ramcharan Arya]

Hello,
I need clarification regarding when call goes into HQ Phone  and press key
1 to transfer call to PSTN Line 1.

Since this is external number 2123942123. Since this is external call and
Unity connection is using Default system transfer.

Do I need to remove block pattern from restriction table.

Please let me know your feedback/suggestions.

Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] 5 Lab Handbook Lab 4 task 7.3 : Caller hear Ringback when agent phone ringing

[Ramcharan Arya]

Hi,
I have select codec g729 in IP voice streaming media apps service parameter and 
then restart IP voice streaming service on pub and sub.

Also on CTI port need to add network on hold music source.

If you watch vik's voice troubleshooting video it is covered also audio on 
demand Amy has also explained about this in great detail.

In vol 2 lab 7 is another good example.

Thanks,
Ramcharan Arya

Sent from my iPhone

On May 5, 2013, at 7:01 PM, Hesham Abdelkereem  wrote:

> Hi Ramarchan,
> 
> I wonder if you have solved the issue as I am looking forward how we 
> accomplish that.
> If you solved it please share your solution if you don't mind.
> 
> 
> Thanks,
> Hesham
> 
> 
> On 27 April 2013 18:19, Ramcharan Arya  wrote:
>> Hi,
>> 
>> I have configure ringback as per solutions guide when agent phone is ringing 
>> caller hear tone of hold. I am using music on hold audio source 2 
>> ringback2.wav file
>> 
>> ringback file is upload in PUB and SUB. IP voice streaming media app service 
>> restarted
>> 
>> Network on hold is set as per solutions guide.PSTN caller and HQ caller hear 
>> tone on hold.
>> 
>> Can someone please suggest approach how to troubleshoot this issue.
>> 
>> Thanks & Regards,
>> Ramcharan Arya
>> 
>> ___
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>> 
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.PlatinumPlacement.com
> 
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] rtp location start time

[Ramcharan Arya]

Food menu is not good. There were very  little options for vegetarians. I
was not happy at all.




On Wed, May 1, 2013 at 9:41 PM, Pavan K  wrote:

> I second that. Excellent experience at RTP. Wasn't impressed with the
> proctors at SJC.
> On May 1, 2013 7:52 PM, "STEPHEN FREEBERG"  wrote:
>
>> RTP exams begin at 7:15 am, You should arrive no later than 7:00 am.
>>
>> David Blair is the proctor and in my opinion is the best proctor I have
>> encountered at Cisco.
>>
>> Steve
>>
>> On May 1, 2013, at 5:06 PM, Karen Johnson 
>> wrote:
>>
>> hi,
>>
>> anyone can share what start time in RTP and proctors there?
>>
>> tks
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] 5 Lab Handbook Lab 4 task 7.3 : Caller hear Ringback when agent phone ringing

[Ramcharan Arya]

Hi,

I have configure ringback as per solutions guide when agent phone is
ringing caller hear tone of hold. I am using music on hold audio source 2
ringback2.wav file

ringback file is upload in PUB and SUB. IP voice streaming media app
service restarted

Network on hold is set as per solutions guide.PSTN caller and HQ caller
hear tone on hold.

Can someone please suggest approach how to troubleshoot this issue.

Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CME BACD dial-peer

[Ramcharan Arya]

Please remove port 1820 from VoIP service it will work

Sent from my iPhone

On Apr 23, 2013, at 9:54 PM, Martin Sloan  wrote:

> Rafael,
> 
> Thanks for the assist.  I've attached the sh run and debug.
> 
> Marty
> 
> 
> On Tue, Apr 23, 2013 at 10:10 PM, Rafael Chavantes  
> wrote:
>> Hello Martin,
>> Can you please send the sh run and the output for debug ccapi inout?
>> 
>> 
>> On Tuesday, April 23, 2013, Martin Sloan wrote:
>>> Hello experts,
>>> 
>>> I'm having some trouble with the BACD dial-peer in vol 1 WB section 9.2.  
>>> I'm following the CUCME BACD 'tcl in flash mem' guide as recommended by Vik 
>>> but I'm getting fast busy when dialing into the aa.  If I bring up a POTS 
>>> dial-peer for PSTN->AA or if I modify session target to ras in the voip 
>>> dial-peer for IP Phone->AA, the aa works so I at least know that part is 
>>> solid. 
>>> 
>>> Here's the dial-peer config I'm using that isn't working:
>>> 
>>> dial-peer voice 222 voip
>>>  service aa
>>>  destination-pattern 3500
>>>  session target ipv4:10.10.110.3
>>>  incoming called-number 3500
>>>  dtmf-relay h245-alphanumeric
>>>  codec g711ulaw
>>>  no vad
>>> 
>>> Also:
>>>  allow-connections h323 to h323
>>>  allow-connections h323 to sip
>>>  allow-connections sip to h323
>>>  allow-connections sip to sip
>>> 
>>> And a snip from the end of a voip dialpeer debug:
>>> 
>>> Apr 24 00:52:24.603: //-1//DPM/dpAssociateIncomingPeerCore:
>>>Calling Number=3500, Called Number=, Voice-Interface=0x0,
>>>Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search 
>>> Type=PEER_TYPE_VOICE,
>>>Peer Info Type=DIALPEER_INFO_SPEECH
>>> Apr 24 00:52:24.603: //-1//DPM/dpAssociateIncomingPeerCore:
>>>Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=222
>>> Apr 24 00:52:24.623: //-1//DPM/dpAssociateIncomingPeerCore:
>>>Calling Number=3006, Called Number=, Voice-Interface=0x0,
>>>Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search 
>>> Type=PEER_TYPE_VOICE,
>>>Peer Info Type=DIALPEER_INFO_SPEECH
>>> Apr 24 00:52:24.623: //-1//DPM/dpAssociateIncomingPeerCore:
>>>Result=Success(0) after DP_MATCH_ORIGINATE; Incoming 
>>> Dial-peer=40001-dial-peer)#
>>> 
>>> I see in the debug it matches 222 as the inbound dial-peer but then it also 
>>> matches 40001 for the SIP CME phone.  Any help is much appreciated.
>>> 
>>> Marty
>> 
>> 
>> -- 
>> Rafael Chavantes
> 
> 
> 
> ___
> For more information regarding industry leading CCIE Lab training, please 
> visit www.ipexpert.com
> 
> Are you a CCNP or CCIE and looking for a job? Check out 
> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] OWLE Lab 1 Task 2.4 " No Service Configured"

[Ramcharan Arya]

Hi Edgar,

I tried this solution in my pod today. Message " No Service configured"
show under directory. Earlier requirement was to display this message as
soon as directory button depress.

Can you write down detail steps may be I am doing something wrong.

Thanks & regards,
Ramcharan Arya
CCIE # 28926 (R&S)



On Wed, Apr 17, 2013 at 7:19 PM, Edgar Feliz  wrote:

> much easier way is to go to go to CCX create a file in notepad that says
> "No Services configured" save it as scph1.html  etcset you enterprise
> parameter to both...on your phone set it to external and on site c ph1
>  Directories url enter. http:///scphn1.html
>
>
> On Wed, Apr 17, 2013 at 2:57 PM, Ramcharan Arya 
> wrote:
>
>> Thank you William for detail steps. I will try this afternoon in my pod.
>>
>> In summary : For No service configuration on phone I should use solution
>> describe either in OWLE lab 4 solutions guide or below describe in email.
>>
>> Regards,
>> Ramcharan Arya
>> CCIE # 28926
>>
>>
>> On Wed, Apr 17, 2013 at 9:09 AM, William Bell wrote:
>>
>>> Right. The order you place the MenuItem child nodes in the XML file will
>>> be the order they are presented on the phone.
>>>
>>> What I do when practicing lab 4 was as follows:
>>>
>>> *CCX*
>>>
>>> 1. RDP to CCX
>>> 2. From CCX browse to xml directory URL  (copied from Ent Params in CUCM)
>>> 3. Copy XML from CCX browser to notepad
>>>
>>>
>>> *CUCM* / *CLI*
>>>
>>> 1. Go to CLI on CUCM and run query
>>>
>>> admin:*run sql select name,urltemplate from telecasterservice*
>>> nameurltemplate
>>> ===
>>> 
>>> Missed CallsApplication:Cisco/MissedCalls
>>> Received Calls  Application:Cisco/ReceivedCalls
>>> Placed CallsApplication:Cisco/PlacedCalls
>>> Intercom Calls  Application:Cisco/IntercomCalls
>>> Personal Directory  Application:Cisco/PersonalDirectory
>>> Corporate Directory Application:Cisco/CorporateDirectory
>>> Voicemail   Application:Cisco/Voicemail
>>>
>>> *Back to CCX*
>>> *
>>> *
>>> In CCX you will edit the XML you have in notepad. You will create
>>> MenuItem child nodes using the above output. The SQL "name" maps to the XML
>>> "Name" field and the "urltemplate" maps to the "URL" field.
>>>
>>> Build your menu accordingly.
>>>
>>> You will likely need to create more than one XML file to service from
>>> CCX. One for "normal" phones and one for the phone that is being
>>> customized. The nature of the customization will vary based on lab
>>> requirement.
>>>
>>> Save files to c:\inetpub\wwwroot\
>>>
>>> *Back to CUCM (cli)*
>>>
>>> Now you want to disable the various directories. I wouldn't delete them
>>> and I sure as heck wouldn't muddle through the web interface to toggle the
>>> services as enabled/disable. So, I use SQL to disable the services:
>>>
>>> run sql update telecasterservice set enabled = 'f' where name like '%d
>>> Calls' or name like '%Directory'
>>>
>>> The above query will disable: Missed Calls, Received Calls, Placed
>>> Calls, Personal Directory, and Corporate Directory.
>>>
>>>
>>> *
>>> *
>>> *Back to CUCM (web)*
>>> *
>>> *
>>> You want to set the services provisioning from Internal to "Both". You
>>> can do this from Ent Params, via common phone profile, or directly on each
>>> phone (via BAT). I use Ent Params because you will also need to remove the
>>> default Directories URL.
>>>
>>> Restart the phones.
>>>
>>>
>>>
>>> -Bill
>>> --
>>> William Bell, CCIE #38914
>>> blog: http://ucguerrilla.com
>>> twitter: @ucguerrilla
>>>
>>>
>>>
>>>
>>> On Apr 17, 2013, at 9:25 AM, Ramcharan Arya wrote:
>>>
>>> Your Bill you are correct OWLE Lab4 solution seems to be more
>>> appropriate for this task.
>>>
>>> So when I create XML file I can keep the same priority of services  as
>>> show in telecasterservices table to keep directory structure identical.
>>>
>>> Thanks & Regards,
>

Re: [OSL | CCIE_Voice] OWLE Lab 1 Task 2.4 " No Service Configured"

[Ramcharan Arya]

Thank you William for detail steps. I will try this afternoon in my pod.

In summary : For No service configuration on phone I should use solution
describe either in OWLE lab 4 solutions guide or below describe in email.

Regards,
Ramcharan Arya
CCIE # 28926


On Wed, Apr 17, 2013 at 9:09 AM, William Bell  wrote:

> Right. The order you place the MenuItem child nodes in the XML file will
> be the order they are presented on the phone.
>
> What I do when practicing lab 4 was as follows:
>
> *CCX*
>
> 1. RDP to CCX
> 2. From CCX browse to xml directory URL  (copied from Ent Params in CUCM)
> 3. Copy XML from CCX browser to notepad
>
>
> *CUCM* / *CLI*
>
> 1. Go to CLI on CUCM and run query
>
> admin:*run sql select name,urltemplate from telecasterservice*
> nameurltemplate
> ===
> 
> Missed CallsApplication:Cisco/MissedCalls
> Received Calls  Application:Cisco/ReceivedCalls
> Placed CallsApplication:Cisco/PlacedCalls
> Intercom Calls  Application:Cisco/IntercomCalls
> Personal Directory  Application:Cisco/PersonalDirectory
> Corporate Directory Application:Cisco/CorporateDirectory
> Voicemail   Application:Cisco/Voicemail
>
> *Back to CCX*
> *
> *
> In CCX you will edit the XML you have in notepad. You will create MenuItem
> child nodes using the above output. The SQL "name" maps to the XML "Name"
> field and the "urltemplate" maps to the "URL" field.
>
> Build your menu accordingly.
>
> You will likely need to create more than one XML file to service from CCX.
> One for "normal" phones and one for the phone that is being customized. The
> nature of the customization will vary based on lab requirement.
>
> Save files to c:\inetpub\wwwroot\
>
> *Back to CUCM (cli)*
>
> Now you want to disable the various directories. I wouldn't delete them
> and I sure as heck wouldn't muddle through the web interface to toggle the
> services as enabled/disable. So, I use SQL to disable the services:
>
> run sql update telecasterservice set enabled = 'f' where name like '%d
> Calls' or name like '%Directory'
>
> The above query will disable: Missed Calls, Received Calls, Placed Calls,
> Personal Directory, and Corporate Directory.
>
>
> *
> *
> *Back to CUCM (web)*
> *
> *
> You want to set the services provisioning from Internal to "Both". You can
> do this from Ent Params, via common phone profile, or directly on each
> phone (via BAT). I use Ent Params because you will also need to remove the
> default Directories URL.
>
> Restart the phones.
>
>
>
> -Bill
> --
> William Bell, CCIE #38914
> blog: http://ucguerrilla.com
> twitter: @ucguerrilla
>
>
>
>
> On Apr 17, 2013, at 9:25 AM, Ramcharan Arya wrote:
>
> Your Bill you are correct OWLE Lab4 solution seems to be more appropriate
> for this task.
>
> So when I create XML file I can keep the same priority of services  as
> show in telecasterservices table to keep directory structure identical.
>
> Thanks & Regards,
> Ramcharan Arya
> CCIE # 28926 (R&S)
>
>
>
> On Wed, Apr 17, 2013 at 6:56 AM, William Bell wrote:
>
>> Ramcharan,
>>
>> The only alternate solution is that you create two XML files that you
>> host from the UCCX web server. One XML file is a complete replica of the
>> Directory menu so that your "normal" phones have a normal experience. The
>> other would display a status message of services disabled.
>>
>> Look at OWLE Lab 4, question 2.2 for a question that is similar. Tinker
>> with it a bit and you can map it into your alternate solution.
>>
>> -Bill
>>
>>
>>
>> On Apr 16, 2013, at 11:16 PM, Ramcharan Arya wrote:
>>
>> Hi Vik,
>>
>> Can you please suggest about alternate solutions  because current
>> solution break voicemail service on the phone.
>>
>> Thanks & Regards,
>> Ramcharan Arya
>>
>>
>>
>> On Tue, Apr 16, 2013 at 12:10 PM, Ramcharan Arya <
>> ramcharan.a...@gmail.com> wrote:
>>
>>> Thanks Bill I will check archive for this discussion.
>>>
>>>
>>> On Tue, Apr 16, 2013 at 12:00 PM, Bill Lake  wrote:
>>>
>>>> Look for a detailed discussion on this very issue around November 19th
>>>> 2012
>>>>
>>>>
>>>>
>>>> Sent from my iPhone
>>>>
>>>> On Apr 16, 2013, at 11:25 AM, Ramcharan Arya 
>>>> wrote:

Re: [OSL | CCIE_Voice] OWLE Lab 1 Task 2.4 " No Service Configured"

[Ramcharan Arya]

Your Bill you are correct OWLE Lab4 solution seems to be more appropriate
for this task.

So when I create XML file I can keep the same priority of services  as show
in telecasterservices table to keep directory structure identical.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 (R&S)



On Wed, Apr 17, 2013 at 6:56 AM, William Bell  wrote:

> Ramcharan,
>
> The only alternate solution is that you create two XML files that you host
> from the UCCX web server. One XML file is a complete replica of the
> Directory menu so that your "normal" phones have a normal experience. The
> other would display a status message of services disabled.
>
> Look at OWLE Lab 4, question 2.2 for a question that is similar. Tinker
> with it a bit and you can map it into your alternate solution.
>
> -Bill
>
>
>
> On Apr 16, 2013, at 11:16 PM, Ramcharan Arya wrote:
>
> Hi Vik,
>
> Can you please suggest about alternate solutions  because current solution
> break voicemail service on the phone.
>
> Thanks & Regards,
> Ramcharan Arya
>
>
>
> On Tue, Apr 16, 2013 at 12:10 PM, Ramcharan Arya  > wrote:
>
>> Thanks Bill I will check archive for this discussion.
>>
>>
>> On Tue, Apr 16, 2013 at 12:00 PM, Bill Lake  wrote:
>>
>>> Look for a detailed discussion on this very issue around November 19th
>>> 2012
>>>
>>>
>>>
>>> Sent from my iPhone
>>>
>>> On Apr 16, 2013, at 11:25 AM, Ramcharan Arya 
>>> wrote:
>>>
>>> Hi Bill
>>>
>>> I breaks voicemail service on that phone. So what is the alternative
>>> solutions for this task.?
>>>
>>> Thanks,
>>> Ramcharan Arya
>>> CCIE # 28926 (R&S)
>>>
>>>
>>>
>>> On Tue, Apr 16, 2013 at 11:22 AM, William Bell wrote:
>>>
>>>> Correct. If you convert a phone to using External URLs only then you
>>>> will be breaking Messages button. You can apply a URL to the messages
>>>> button but it doesn't restore the behavior you are looking for because the
>>>> VM services URL that I have seen used/reference is a XML phone menu object.
>>>> Which means you get a menu.
>>>>
>>>> So, what you are seeing is expected per the requirements of the OWLE
>>>> lab.
>>>>
>>>>
>>>> -Bill
>>>>  --
>>>> William Bell, CCIE #38914
>>>> blog: http://ucguerrilla.com
>>>> twitter: @ucguerrilla
>>>>
>>>>
>>>>
>>>>
>>>> On Apr 16, 2013, at 11:42 AM, Ramcharan Arya wrote:
>>>>
>>>> Hi,
>>>>
>>>> When I use proposed solutions according to solution guide for disabling
>>>> directory service it works but voicemail service also stop working on the
>>>> same phone.
>>>>
>>>> Can someone please test this and let me know if anyone had similar
>>>> problem.
>>>>
>>>> Thanks & Regards,
>>>> Ramcharan Arya
>>>> CCIE # 28926 (R&S)
>>>>
>>>> ___
>>>> For more information regarding industry leading CCIE Lab training,
>>>> please visit www.ipexpert.com
>>>>
>>>> Are you a CCNP or CCIE and looking for a job? Check out
>>>> www.PlatinumPlacement.com
>>>>
>>>>
>>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>>
>>
>
> --
> William Bell, CCIE #38914
> blog: http://ucguerrilla.com
> Follow me on twitter @ucguerrilla
>
>
>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] OWLE Lab 1 Task 2.4 " No Service Configured"

[Ramcharan Arya]

Hi Vik,

Can you please suggest about alternate solutions  because current solution
break voicemail service on the phone.

Thanks & Regards,
Ramcharan Arya



On Tue, Apr 16, 2013 at 12:10 PM, Ramcharan Arya
wrote:

> Thanks Bill I will check archive for this discussion.
>
>
> On Tue, Apr 16, 2013 at 12:00 PM, Bill Lake  wrote:
>
>> Look for a detailed discussion on this very issue around November 19th
>> 2012
>>
>>
>>
>> Sent from my iPhone
>>
>> On Apr 16, 2013, at 11:25 AM, Ramcharan Arya 
>> wrote:
>>
>> Hi Bill
>>
>> I breaks voicemail service on that phone. So what is the alternative
>> solutions for this task.?
>>
>> Thanks,
>> Ramcharan Arya
>> CCIE # 28926 (R&S)
>>
>>
>>
>> On Tue, Apr 16, 2013 at 11:22 AM, William Bell wrote:
>>
>>> Correct. If you convert a phone to using External URLs only then you
>>> will be breaking Messages button. You can apply a URL to the messages
>>> button but it doesn't restore the behavior you are looking for because the
>>> VM services URL that I have seen used/reference is a XML phone menu object.
>>> Which means you get a menu.
>>>
>>> So, what you are seeing is expected per the requirements of the OWLE
>>> lab.
>>>
>>>
>>> -Bill
>>>  --
>>> William Bell, CCIE #38914
>>> blog: http://ucguerrilla.com
>>> twitter: @ucguerrilla
>>>
>>>
>>>
>>>
>>> On Apr 16, 2013, at 11:42 AM, Ramcharan Arya wrote:
>>>
>>> Hi,
>>>
>>> When I use proposed solutions according to solution guide for disabling
>>> directory service it works but voicemail service also stop working on the
>>> same phone.
>>>
>>> Can someone please test this and let me know if anyone had similar
>>> problem.
>>>
>>> Thanks & Regards,
>>> Ramcharan Arya
>>> CCIE # 28926 (R&S)
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>>
>>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] OWLE Lab 1 Task 2.4 " No Service Configured"

[Ramcharan Arya]

Thanks Bill I will check archive for this discussion.


On Tue, Apr 16, 2013 at 12:00 PM, Bill Lake  wrote:

> Look for a detailed discussion on this very issue around November 19th 2012
>
>
>
> Sent from my iPhone
>
> On Apr 16, 2013, at 11:25 AM, Ramcharan Arya 
> wrote:
>
> Hi Bill
>
> I breaks voicemail service on that phone. So what is the alternative
> solutions for this task.?
>
> Thanks,
> Ramcharan Arya
> CCIE # 28926 (R&S)
>
>
>
> On Tue, Apr 16, 2013 at 11:22 AM, William Bell wrote:
>
>> Correct. If you convert a phone to using External URLs only then you will
>> be breaking Messages button. You can apply a URL to the messages button but
>> it doesn't restore the behavior you are looking for because the VM services
>> URL that I have seen used/reference is a XML phone menu object. Which means
>> you get a menu.
>>
>> So, what you are seeing is expected per the requirements of the OWLE lab.
>>
>>
>> -Bill
>>  --
>> William Bell, CCIE #38914
>> blog: http://ucguerrilla.com
>> twitter: @ucguerrilla
>>
>>
>>
>>
>> On Apr 16, 2013, at 11:42 AM, Ramcharan Arya wrote:
>>
>> Hi,
>>
>> When I use proposed solutions according to solution guide for disabling
>> directory service it works but voicemail service also stop working on the
>> same phone.
>>
>> Can someone please test this and let me know if anyone had similar
>> problem.
>>
>> Thanks & Regards,
>> Ramcharan Arya
>> CCIE # 28926 (R&S)
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>>
>>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] OWLE Lab 1 Task 2.4 " No Service Configured"

[Ramcharan Arya]

Hi Bill

I breaks voicemail service on that phone. So what is the alternative
solutions for this task.?

Thanks,
Ramcharan Arya
CCIE # 28926 (R&S)



On Tue, Apr 16, 2013 at 11:22 AM, William Bell  wrote:

> Correct. If you convert a phone to using External URLs only then you will
> be breaking Messages button. You can apply a URL to the messages button but
> it doesn't restore the behavior you are looking for because the VM services
> URL that I have seen used/reference is a XML phone menu object. Which means
> you get a menu.
>
> So, what you are seeing is expected per the requirements of the OWLE lab.
>
>
> -Bill
> --
> William Bell, CCIE #38914
> blog: http://ucguerrilla.com
> twitter: @ucguerrilla
>
>
>
>
> On Apr 16, 2013, at 11:42 AM, Ramcharan Arya wrote:
>
> Hi,
>
> When I use proposed solutions according to solution guide for disabling
> directory service it works but voicemail service also stop working on the
> same phone.
>
> Can someone please test this and let me know if anyone had similar problem.
>
> Thanks & Regards,
> Ramcharan Arya
> CCIE # 28926 (R&S)
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] OWLE Lab 1 Task 2.4 " No Service Configured"

[Ramcharan Arya]

Hi,

When I use proposed solutions according to solution guide for disabling
directory service it works but voicemail service also stop working on the
same phone.

Can someone please test this and let me know if anyone had similar problem.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 (R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CME -> GK -> UCM bandwidth

[Ramcharan Arya]

Here is bug id

CSCsl74701 Bug Details ARQ requests 1280 when no regions are defined to use
g711

Regards,
Ramcharan Arya
CCIE # 28926 (R&S)



On Mon, Apr 8, 2013 at 9:02 AM, Suresh Bhandari  wrote:

> Will check and let you know.
>
> BTW you mentioned "a known bug" can you please post a link of it?
>
> Thanks.
>
>
> On Mon, Apr 8, 2013 at 7:41 PM, Mohamed Gazzaz wrote:
>
>> Hi Suresh,
>>
>> I think you are hitting a known bug . Please go to service parameters -->
>> call manager  and change the following to G729
>>
>> Intraregion Audio Codec Default: G729
>>
>> Regards,
>> Mohamed Gazzaz
>>
>> --
>> Date: Mon, 8 Apr 2013 19:02:14 +0545
>> From: bring...@gmail.com
>> To: ccie_voice@onlinestudylist.com
>> Subject: [OSL | CCIE_Voice] CME -> GK -> UCM bandwidth
>>
>>
>> Hello Experts!
>>
>> I have HQ as the GK and CME, CUCM publisher and subscriber are registered
>> to GK in single zone. Further, GK Trunk is in separate region/DP with
>> hard-coded G.729 codec with other regions/itself as well.
>>
>> When I call from HQ to CME side, and check "sh gatek call" it shows that
>> the call is consuming 16K bandwidth, which is expected.
>>
>> The dial-peer to CME has g729r8 as codec (the default one).
>>
>> Even then, the same command displays that the bandwidth consumed is 128K.
>>
>> Any thoughts on what probably I missed?
>> --
>> Suresh Bhandari
>>
>> ___ For more information
>> regarding industry leading CCIE Lab training, please visit
>> www.ipexpert.com Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
>
> --
> Suresh Bhandari
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Lab 1: Task 3.1 : 5 Lab Handbook - workbook lab

[Ramcharan Arya]

Hi,
I have question regarding User-side Q.921/Q.931 Signalling

when I configure my gateway will full T1 PRI

command isdn protocol-emulate user does not appear under D channel
configuration.

interface Serial0/0/0:23
 no ip address
 encapsulation hdlc
 isdn switch-type primary-ni
 isdn incoming-voice voice
 isdn map address 911 plan isdn type unknown
 isdn map address [2-9]..$ plan isdn type subscriber
 isdn map address 1[2-9]..[2-9]..$ plan isdn type national
 isdn outgoing display-ie
 isdn outgoing ie redirecting-number
 no cdp enable

Do we need to add this command manual.? WB says it is by default.

Please let us know your thoughts

Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CLI Command to monitor Directed call Park in CUCM

[Ramcharan Arya]

Hi,

Is there any  command to check Directed call Park status on CUCM using CLI.?

Please let me know.

Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Lab Exam Speed Strategy

[Ramcharan Arya]

Hi Bill,

Thank you very much for nice writeup on strategy.

This is really helpful for CCIE vocie lab aspirants.  Do you have any
strategy how many notepad sessions to keep open simultaneously.

How to arrange SecureCRT sessions screen, online lab webpage, and notepad
on 32" screen.

I am still practice same method which I learn during R&S bootcamp with
Marko.If you have any better approach please share.


Regards,
Ramcharan Arya
CCIE # 28926 (R&S)



On Wed, Apr 3, 2013 at 10:57 AM, William Bell  wrote:

> I have had this as a draft for a few days. Just too busy to finish it
> until now. So, some of my thoughts are redundant to what others have said.
> Hopefully that isn't a bad thing.
>
> Timing is definitely a critical aspect of the exam. I know I have areas
> where I am slower than I should be. I suspect most people do. Most of my
> comments herein are based on my self-study practice labs. I have taken the
> lab a couple of times but most of the tinkering I have done with my method
> is during self-study. When I sit for the real lab, I don't tinker. I go
> with whatever method I have been practicing. So, that is suggestion #1:
> Don't tinker on lab day, stick to your guns and don't 2nd guess your method.
>
> Going back to the OP, I believe you should look at the bright side. Your
> statement "...I seemed to keep moving forward..." is key. The fact you were
> able to avoid a stall is important. I believe controlling this exam is
> about rhythm and finding what config approach helps you establish a
> sustainable and consistent rhythm. Speed on any individual task is critical
> but rhythm is king in my opinion.
>
> Like others (most?), I follow the device-based approach. It has been
> around since pre 3.0 blueprint (contrary to popular opinion) and is a
> proven strategy. However, I have found that you will need to customize that
> approach to suit your needs. For me, it is about managing the transitions.
> Again, I believe focusing on establishing and maintaining a rhythm is
> absolutely key. Smoothing the transitions and/or stacking tasks that help
> ease transitions is important. Also, you won't maintain the same rhythm
> throughout the exam. Some tasks you will bang out (or should) very fast.
> Others, you will need to pay close attention to what you are doing.
>
> So, suggestion #2 is find your rhythm.
>
> Establishing your rhythm is a product of repetition. Practice, practice,
> practice as Mr. Sears puts it. You may also need some face time with the
> real lab to help you come into your rhythm. For example, some of the "weak
> spots" I had (or maybe still have) and adjustments I made.
>
>
> 1. Transitioning from read-through to config. The read through is/was the
> worst for me. Most people I have spoken with (who have passed or come
> close) are able to get through the read-through in 30 minutes. Some say
> less. I was taking a whole lot more time than 30 minutes. My budget for
> this task is 30m today.
>
> Adjustments I made:
>
>
>- Dial Plan. I was building out my dial plan (on paper) during the
>read through. My logic was that "you have to do it at some point, just do
>it now". The flaw with that logic is that to establish a good rhythm, you
>need to avoid lingering on a task for too long. I decided that I would
>focus on getting the tasks mapped out as quick as possible and the task of
>mapping out a dial plan could wait. So, I added a section in my table to
>track the DP-related tasks by task ID (e.g. 4.1) only.
>- Skim. I already know that I am going to do a thorough read on the
>questions at least once (during config) and likely twice (during
>validation). No sense in reading the question in detail 3 times. So, I
>mainly focus on what devices/apps are affected by the question and put the
>ID in the table.
>
>
> How I use this task:
>
>- I build a table (like the dev-based approach table) to track tasks
>- I build a table to track what the PSTN wants to see for off net
>calls (this is key because I can build an entire h323 config just on that
>info)
>- I track phone/user features/buttons/etc. This goes to speed when
>customizing phones
>- I build a basic.txt text file to capture IP addresses, vlans,
>interface assignments, etc. I keep this very short. Note that with the new
>exam, the instructions are electronic. This kinda de-emphasizes the need to
>store some of this info.
>
>
>
> 2. Where to stick in QoS. QoS is clearly infrastructure and all of the
> action happens in the router config. However, for me there is a "slow down"
> if I try to stick QoS config in with banging out vlan, ntp, dhcp, 

Re: [OSL | CCIE_Voice] Lab Exam Speed Strategy

[Ramcharan Arya]

Hi Mike,

Thank you for sharing great information.

Can you share some detail about approach and sequence to follow like
Infrastructure, gateway configuration, QoS and SRST, Presence . Unity, UCCX
etc.

When did you do SRST testing in the middle or at the end of the lab.?

Please share your experience.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 ( Routing & Switching)



On Tue, Apr 2, 2013 at 12:26 PM,  wrote:

> It took me 4 attempts to pass the lab.  Actually the first three attempts
> helped to develop a strategy for passing.  The proctor in RTP, David,
> thought me something, don't look at a no pass as a failure but a as
> learning experience.  After my third attempt I couldn't stand to see
> another "fail" on the score report.  I took 45 days, doing two labs a day
> following the same strategy.
>
> If your typing skills are below 70 words/minute or less or you are hunt
> and peck typist take a typing class "won't hurt" have to type fast.
>
> Briefly read the entire lab and absorb as much as possible 5 to 10 minutes
> maximum regarding CUCM and gateway, QoS, etc.
>
> Perform all your switch and gateway configurations first including
> everything so you don't have to revisit them.  Write all configuration for
> SW and Gateways in notepad prior to putting into devices and same to
> desktop, leave them there when leaving the lab.  Copy all the
> customization's you'll need and put in notepad and put on desktop, i.e.,
> media resources, dial-peer, other customizations.  Don't type and memorize
> things you can obtain from links copy from links and edit
>
> 1.) Configure the SW first and take what configure you can from there
> and move onto R1.
> 2.) Configure R1 and take configuration from there to R2 and edit and
> add additional configuration.
> 3.) Configure R2 including SRST/GK/Dial-peers/MVA/everything.  Move
> configure from R2 and R1 to R3 and edit.
> 4.) Configure R3/CUE/Presence/SRST using configuration from R1 and R2
> that's reusable.
> 5.) Don't type the same thing twice.
> 5.) Now move to CUCM.  You should have a pretty good idea of what you
> will need from reading lab.
> 6.) Open browser to CUCM Pub, Sub, Unity.  Add ntp and any required
> customizations
> 7.) Configure CUCM moving from left to right, save phones for last.
> 8.) Configure UNITY and all voicemail customization
> 9.) Configure UCCX script and record prompts unless they are
> pre-recorded for you.
> 10.)Configure Presence if you have it on your lab.
> 11.)Need at least three hours to test and validate.
> 12.)Make every attempt to complete lab before lunch.
> 13.)Feel good at lunch relax forget the lab
> 14.)Get your score report that says "PASS".
> 15.)Preform Troubleshooting as you are most comfortable with I saved
> it for last.
>
> There was a guy walking down the street in NYC and he recognized a famous
> pianist.  He stopped him and ask him "How do you get to Carnegie Hall.  The
> pianist replied "Practice, Practice, Practice".
>
> Michael Sears, CCIE(V)#38404
> Cisco Certified Unfied Communications Computing Systems Specialist
> E911 Specialist
> "Designing and Implementing Cisco Unified Communications on Unified
> Computing Systems"
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] HQ and Branch1 phones cannot call CUE

[Ramcharan Arya]

Hi,

You need to add codec g729r8 in your transcoder profile.

Codec Configuration
 Codec : g711ulaw, Maximum Packetization Period : 30
 Codec : g711alaw, Maximum Packetization Period : 30
 Codec : g729ar8, Maximum Packetization Period : 60
 Codec : g729abr8, Maximum Packetization Period : 60


Thanks,
Ramcharan Arya


On Wed, Mar 20, 2013 at 2:46 PM, Vikky Kumar  wrote:

> Hi Experts,
>
> I have configured :
>
> 1. transcoder on CUCM for HQ & BR2 (Cisco IOS Enhanced Media Termination
> Point )
> and also Router of  BR2 (dspfarm profile 2 transcode , max sess 4 .. )
>
> 2. above hq-xcode,, sc-xcode is registered  > included in respective > mrg
> > mrgl > DP
>
> 3. voice service voip , allow connection h t h,allow connection h t  s,
> allow connection s t h
>
> When call from HQ i can notice randomly (6221, 6222, 6223) , very very
> small ring/tone, Display "Ring out" with busy tone
>
> Please advise...
>
> [
> Router BR2 >sh dspfarm all >
>
> Dspfarm Profile Configuration
>
>  Profile ID = 2, Service = TRANSCODING, Resource ID = 1
>  Profile Description :
>  Profile Service Mode : Non Secure
>  Profile Admin State : UP
>  Profile Operation State : ACTIVE
>  Application : SCCP   Status : ASSOCIATED
>  Resource Provider : FLEX_DSPRM   Status : UP
>  Number of Resource Configured : 4
>  Number of Resource Available : 4
>  Codec Configuration
>  Codec : g711ulaw, Maximum Packetization Period : 30
>  Codec : g711alaw, Maximum Packetization Period : 30
>  Codec : g729ar8, Maximum Packetization Period : 60
>  Codec : g729abr8, Maximum Packetization Period : 60
>
> ]
>
>
> Regards,
>
> Vikky
>
>
>
> On Wed, Mar 20, 2013 at 9:54 PM, Ramcharan Arya 
> wrote:
>
>> Hi,
>>
>> You have to add on your CME side.
>>
>> voice service voip
>> allow connection h t h
>> allow connection h t  s
>> allow connection s t h
>>
>> Thanks,
>> Ramcharan Arya
>>
>>
>>
>>
>>
>> On Wed, Mar 20, 2013 at 1:16 PM, Vikky Kumar wrote:
>>
>>>  Hi Experts,
>>>
>>> I configured branch 2 CME/CUE working normal for Voice mails.
>>>
>>> CUE is registered with CUCM but I call not call CUE(6220)  from HQ and
>>> Branch1 but branch2 phones 4001 and 4002 working normal/ringing from every
>>> where.
>>>
>>> FYI. I have also configured CAC between on Br2 site - HQ site
>>>
>>> Please hel.
>>>
>>> Regards
>>>
>>> Vikky
>>>
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] HQ and Branch1 phones cannot call CUE

[Ramcharan Arya]

Hi,

You have to add on your CME side.

voice service voip
allow connection h t h
allow connection h t  s
allow connection s t h

Thanks,
Ramcharan Arya





On Wed, Mar 20, 2013 at 1:16 PM, Vikky Kumar  wrote:

> Hi Experts,
>
> I configured branch 2 CME/CUE working normal for Voice mails.
>
> CUE is registered with CUCM but I call not call CUE(6220)  from HQ and
> Branch1 but branch2 phones 4001 and 4002 working normal/ringing from every
> where.
>
> FYI. I have also configured CAC between on Br2 site - HQ site
>
> Please hel.
>
> Regards
>
> Vikky
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] IntegratedServicesEngine bound to Loopback can ping but can't http to it?

[Ramcharan Arya]

Did he enable ip http server  also ip http path flash/gui

I suggest he need to xtract tar file and make sure all files are there in
flash/gui directory



On Tue, Mar 19, 2013 at 7:33 PM, Bill  wrote:

>   Ip ospf network point-to-point
>
> And he said he can ping and session to it,  web interface is not working
> though?
>
>
> Sent from my iPad
>
> On Mar 19, 2013, at 6:31 PM, Andy Thanh  wrote:
>
> Did you advertise this network through ospf? This is for simple command:
>
> router ospf 1
>  network 0.0.0.0 255.255.255.255 area 0
>
> On Wed, Mar 20, 2013 at 5:11 AM, Sergey Heyphets wrote:
>
>> Jason,
>>
>>
>> is your route to *1*10.32.60.253 ?
>>
>>
>> On Tue, Mar 19, 2013 at 4:56 PM, Jason Aarons wrote:
>>
>>>  ** **
>>>
>>> What are some troubleshooting shooting steps for a
>>> CUE/IntegratedServicesEngine that is using ip unnumbered loopback0?
>>>
>>> ** **
>>>
>>> I can ping the ISE locally and from remote sites, but I can’t get the
>>> http web page for the ISE  to show (CME web page is good). I can ping
>>> 10.32.60.253 from another site but web page doesn’t come up in Internet
>>> Explorer.
>>>
>>> ** **
>>>
>>> I can session to ISE  (show tech page is correct), I have reset ISE, I
>>> have done a restore factory default. I have reloaded the router and the ISE.
>>> 
>>>
>>> ** **
>>>
>>> What else can I do?  If I switch it to another interface, reload, etc it
>>> works fine (ping, web page, phones pilot number works fine). What are some
>>> CUE/ISE debug commands I should run to see if http traffic is making it to
>>> the CUE/ISE?
>>>
>>> ** **
>>>
>>> ** **
>>>
>>> Branch2#
>>>
>>> Int loopback0 
>>>
>>>Ip address 10.32.60.254 255.255.255.0
>>>
>>>Ip ospf network point-to-point
>>>
>>> !
>>>
>>> Int integrated-services-engine 1/0
>>>
>>> Ip unnumbered loopback0
>>>
>>>Ip ospf network point-to-point
>>>
>>> Service-module ip address 10.32.60.253
>>>
>>> Service-module ip default-gateway 10.32.60.254
>>>
>>> Keepalive 10
>>>
>>> No shut
>>>
>>> !
>>>
>>> Ip route 110.32.60.253 255.255.255.255 integrated-service-engine 1/0
>>>
>>> ** **
>>>
>>> Seems to me I’m missing something when using loopbacks for the CUE/ISE.*
>>> ***
>>>
>>> ** **
>>>
>>> -jason
>>>
>>> ** **
>>>
>>> Could be some typo’s above this is from memory of my home lab, I’m not
>>> at home right now.
>>>
>>> ** **
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] IntegratedServicesEngine bound to Loopback can ping but can't http to it?

[Ramcharan Arya]

Jason,

Can you share your full Branch2 configuration here.?

Thanks,
Ramcharan Arya
CCIE # 28926 (R&S)


On Tue, Mar 19, 2013 at 6:31 PM, Andy Thanh  wrote:

> Did you advertise this network through ospf? This is for simple command:
>
> router ospf 1
>  network 0.0.0.0 255.255.255.255 area 0
>
>
> On Wed, Mar 20, 2013 at 5:11 AM, Sergey Heyphets wrote:
>
>> Jason,
>>
>>
>> is your route to *1*10.32.60.253 ?
>>
>>
>> On Tue, Mar 19, 2013 at 4:56 PM, Jason Aarons wrote:
>>
>>>  ** **
>>>
>>> What are some troubleshooting shooting steps for a
>>> CUE/IntegratedServicesEngine that is using ip unnumbered loopback0?
>>>
>>> ** **
>>>
>>> I can ping the ISE locally and from remote sites, but I can’t get the
>>> http web page for the ISE  to show (CME web page is good). I can ping
>>> 10.32.60.253 from another site but web page doesn’t come up in Internet
>>> Explorer.
>>>
>>> ** **
>>>
>>> I can session to ISE  (show tech page is correct), I have reset ISE, I
>>> have done a restore factory default. I have reloaded the router and the ISE.
>>> 
>>>
>>> ** **
>>>
>>> What else can I do?  If I switch it to another interface, reload, etc it
>>> works fine (ping, web page, phones pilot number works fine). What are some
>>> CUE/ISE debug commands I should run to see if http traffic is making it to
>>> the CUE/ISE?
>>>
>>> ** **
>>>
>>> ** **
>>>
>>> Branch2#
>>>
>>> Int loopback0 
>>>
>>>Ip address 10.32.60.254 255.255.255.0
>>>
>>>Ip ospf network point-to-point
>>>
>>> !
>>>
>>> Int integrated-services-engine 1/0
>>>
>>> Ip unnumbered loopback0
>>>
>>>Ip ospf network point-to-point
>>>
>>> Service-module ip address 10.32.60.253
>>>
>>> Service-module ip default-gateway 10.32.60.254
>>>
>>> Keepalive 10
>>>
>>> No shut
>>>
>>> !
>>>
>>> Ip route 110.32.60.253 255.255.255.255 integrated-service-engine 1/0
>>>
>>> ** **
>>>
>>> Seems to me I’m missing something when using loopbacks for the CUE/ISE.*
>>> ***
>>>
>>> ** **
>>>
>>> -jason
>>>
>>> ** **
>>>
>>> Could be some typo’s above this is from memory of my home lab, I’m not
>>> at home right now.
>>>
>>> ** **
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] IntegratedServicesEngine bound to Loopback can ping but can't http to it?

[Ramcharan Arya]

Hi,

Your IP route statement is wrong

It should be

Ip route 10.32.60.253 255.255.255.255 integrated-service-engine 1/0

Regards,
Ramcharan Arya
CCIE # 28926 (R&S)


On Tue, Mar 19, 2013 at 3:56 PM, Jason Aarons  wrote:

> ** **
>
> What are some troubleshooting shooting steps for a
> CUE/IntegratedServicesEngine that is using ip unnumbered loopback0?
>
> ** **
>
> I can ping the ISE locally and from remote sites, but I can’t get the http
> web page for the ISE  to show (CME web page is good). I can ping
> 10.32.60.253 from another site but web page doesn’t come up in Internet
> Explorer.
>
> ** **
>
> I can session to ISE  (show tech page is correct), I have reset ISE, I
> have done a restore factory default. I have reloaded the router and the ISE.
> 
>
> ** **
>
> What else can I do?  If I switch it to another interface, reload, etc it
> works fine (ping, web page, phones pilot number works fine). What are some
> CUE/ISE debug commands I should run to see if http traffic is making it to
> the CUE/ISE?
>
> ** **
>
> ** **
>
> Branch2#
>
> Int loopback0 
>
>Ip address 10.32.60.254 255.255.255.0
>
>Ip ospf network point-to-point
>
> !
>
> Int integrated-services-engine 1/0
>
> Ip unnumbered loopback0
>
>Ip ospf network point-to-point
>
> Service-module ip address 10.32.60.253
>
> Service-module ip default-gateway 10.32.60.254
>
> Keepalive 10
>
> No shut
>
> !
>
> Ip route 110.32.60.253 255.255.255.255 integrated-service-engine 1/0
>
> ** **
>
> Seems to me I’m missing something when using loopbacks for the CUE/ISE.***
> *
>
> ** **
>
> -jason
>
> ** **
>
> Could be some typo’s above this is from memory of my home lab, I’m not at
> home right now.
>
> ** **
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] SRST issues

[Ramcharan Arya]

Hello,

I have couple of issues when site becomes SRST.

1. One ephone 1 and 2 it does not add phone type automatically. I'm using
one 7962 and one 7965 phone.

ccm-manager mgcp-fallback

telephony-service
srst mode auto all

2. My other site is H.323 gateway and I am using call-manager-fallback

First of all my ie display showing E.164 number when making call to PSTN

2nd issue I am unable to preserve active call on H.323 gateway also keys
are not same when phone register to cucm

This site has mobile voice access it does not work. Is there any solution
to change vxml script to use fall-manager-fallback feature.

4th issue : When I press message button I am able to reach mailbox using
alternate ext in Unity. Is there any other approach if I am not allow to
use alternate ext.


Please help me how should I fix these problems.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] SRST transfer system and pattern

[Ramcharan Arya]

Hi,

As per cisco CME design guide these commands are necessary. Please refer
cisco CME SRND.

http://www.cisco.com/en/US/docs/voice_ip_comm/cucme/srnd/design/guide/clproc.html#wp1068396

Regards,
Ramcharan Arya
CCIE # 28926 ( R&S)


On Fri, Feb 15, 2013 at 4:51 PM, Cory Gray wrote:

> I have had several conversations with people on this.  Everyone can easily
> make SRST work but scoring points seems to be the trickiest thing in the
> lab.  So I do not think anyone knows for sure what should or should not be
> on the “template”  I have never scored any points there so I cannot give an
> OPINION on what should or should not be there.  People say they score
> points and then go with the same template on the next lab and get 0 so it
> is a mystery.  People can share templates without breaking NDA since the
> question is never discussed.  Getting the question right is the easy part!
> 
>
> ** **
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Pixar Perfect
> *Sent:* Friday, February 15, 2013 5:26 PM
> *To:* CCIE Voice OSL
> *Subject:* [OSL | CCIE_Voice] SRST transfer system and pattern
>
> ** **
>
> transfer-system full-consultdo we need to specify this? I thought by
> default it is wnabled but I read on voiceie forum someone scored nothing on
> SRST adn the only conclusion was the transfersystem consult was missing.
> Any thoughts?
>
> ** **
>
>  srst mode auto-provision all
>
>  srst ephone description SRST-EPHONES-CME  
>
>  srst dn template 1
>
>  srst dn line-mode octo
>
>  max-ephones 10
>
>  max-dn 10 preference 2 no-reg both
>
>  ip source-address 10.10.1.13   port 2000
>
>  time-zone 42
>
>  max-conferences 8 gain -6
>
>  call-forward pattern .T
>
>  time-webedit 
>
> * transfer-system full-consult*
>
> * transfer-pattern .T*
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Site A to Site C can't leave vm on CUE

[Ramcharan Arya]

Hi,
Check your WAN QoS It could be related to one way RTP compression.

Regards
Ramcharan Arya

On Sat, Feb 2, 2013 at 12:37 PM, Cory Gray wrote:

> 
>
> *You need to transfer h323 to sip on SiteC*
>
> Voice services voip
>
> Allow connections h323 to sip
>
> ** **
>
> *Make sure your Site C Gwy register to Site A GK as H323-GWY instead of
> VOIP-GWY*
>
> No gateway
>
> Gateway 
>
> ** **
>
> You do need a transcoder and it looks like you have it configured mostly
> correct
>
> You do not need ephone 3
>
> Also it is a good practice to use version 6 or higher for sccp ccm
> configuration or higher
>
> Also use bind interface X under sccp ccm group
>
> You should also not need “mailbox-selection last-redirect-num”
>
> ** **
>
> ** **
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Joe Fearday
> *Sent:* Saturday, February 02, 2013 11:28 AM
> *To:* ccie_voice@onlinestudylist.com
> *Subject:* [OSL | CCIE_Voice] Site A to Site C can't leave vm on CUE
>
> ** **
>
> Site A to Site C can't leave vm on CUE 
>
>  
>
> Site A to Site C configured for g729
> Site A routes to Site C using gk in region C
> PSTN can leave vm on CUE as can other site C phones
> I am thinking this is a site C transcoding problem
> CUE only supports g711; right?
> Site C transcoding detailed below along with ephone:
>
>  
>
> sccp local Vlan102
> sccp ccm 10.196.102.1 identifier 1 version 3.1
> sccp
> !
> sccp ccm group 1
>  associate ccm 1 priority 1
>  associate profile 1 register sctrans
> !
> dspfarm profile 1 transcode
>  codec g711ulaw
>  codec g711alaw
>  codec g729ar8
>  codec g729abr8
>  codec g729r8
>  maximum sessions 12
>  associate application SCCP
>
>  telephony-service
>  sdspfarm units 1
>  sdspfarm transcode sessions 20
>  sdspfarm tag 1 sctrans
>
>  
>
> ephone  3
> codec g729r8 dspfarm-assist
>
>  
>
> dial-peer voice 9000 voip
>  mailbox-selection last-redirect-num
>  destination-pattern 3180  (CUE)
>  session protocol sipv2
>  session target ipv4:10.196.102.2
>  dtmf-relay sip-notify
>  codec g711ulaw
>  no vad
>
> Any assistance is greatly apprecaited.
> Joe Fearday
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Failed Voice Lab

[Ramcharan Arya]

Hi Ben,

I feel bad about this news  you did not score passing marks in lab exam.
Can you please share your experience  without breaking NDA.

At least this will be useful for others who are preparing for lab.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926

On Thu, Jan 31, 2013 at 1:39 PM, Ben John  wrote:

>  Guys,
> i took my lab last week in SJ and i failed again that was my fourth
> attempt. i got everything working tested and i was confident i will get it
> this time but when i got my result i was disappointed i don't feel like
> going back again i feel like i am not spending enough times with my family
> and it cost me almost 2K for each attempt. i have seen all the labs as far
> as i know i don't if i do go back which one i will get and there is no
> guaranty i will pass it looks like i am doing the way cisco wants it. i am
> really down right the good thing is i can do Voice.
>
> Thanks,
>
> Ben
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CME 12.4T and max-dn X no-reg

[Ramcharan Arya]

Hi Jason,

If you put command max-dn 30 no-reg both you need to reboot the router then
phone will not register into Gatekeeper with alias.

Regards,
Ramcharan Arya
CCIE # 28926 ( R&S)



On Wed, Jan 30, 2013 at 7:49 PM, Jason Aarons  wrote:

> Is there a known bug with max-dn 30 no-reg in that ephone-dns still
> register to gatekeeper? Anyone got a bug id?  
>
> ** **
>
> Pretty clear it don’t work, you have to put no-reg in the ephone-dn itself.
> 
>
> ** **
>
> -jason
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CFUR Blog link broken

[Ramcharan Arya]

Hi Vik,

I am unable to access CFUR blog link it is displaying 404 error message.

http://blog.ipexpert.com/2010/04/05/cfur-and-ucm-7.0-new-features/

Can you please correct this.?

Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Workbook 1 Lab 5a

[Ramcharan Arya]

Yes, This pre-configuration could be part of  troubleshooting.


On Mon, Jan 28, 2013 at 5:10 PM, Nathan Silvers  wrote:

> hahaha nice.. gotta love how detailed the solutions guide is at times...
> hey its all pre-configured but you have to remove this configuration before
> you can do the configuration you we tell you to do.. thanks guys!
>
>
> On Mon, Jan 28, 2013 at 3:05 PM, Ramcharan Arya 
> wrote:
>
>> You might have assigned  gateway directly under route-pattern.
>>
>> If you remove gateway from route-pattern then you should be to add into
>> route-group/route-list.
>>
>> Regards,
>> Ramcharan Arya
>>
>>
>> On Mon, Jan 28, 2013 at 4:42 PM, Nathan Silvers wrote:
>>
>>> Has anyone seen when trying to create a route group the gateways do not
>>> all appear as available devices, they appear when configuring route
>>> patterns but not under route groups.
>>>
>>> --
>>> "The biggest mistake people make in life is not trying to make a living
>>> at doing what they most enjoy."
>>>
>>> - Malcolm Forbes
>>>
>>> Nathan Silvers
>>>
>>> ___
>>> For more information regarding industry leading CCIE Lab training,
>>> please visit www.ipexpert.com
>>>
>>> Are you a CCNP or CCIE and looking for a job? Check out
>>> www.PlatinumPlacement.com
>>>
>>
>>
>
>
> --
> "The biggest mistake people make in life is not trying to make a living at
> doing what they most enjoy."
>
> - Malcolm Forbes
>
> Nathan Silvers
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Workbook 1 Lab 5a

[Ramcharan Arya]

You might have assigned  gateway directly under route-pattern.

If you remove gateway from route-pattern then you should be to add into
route-group/route-list.

Regards,
Ramcharan Arya


On Mon, Jan 28, 2013 at 4:42 PM, Nathan Silvers  wrote:

> Has anyone seen when trying to create a route group the gateways do not
> all appear as available devices, they appear when configuring route
> patterns but not under route groups.
>
> --
> "The biggest mistake people make in life is not trying to make a living at
> doing what they most enjoy."
>
> - Malcolm Forbes
>
> Nathan Silvers
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Question on Auto Qos WAN QoS

[Ramcharan Arya]

Hi,

I have noticed when I run AutoQoS on sub-interface it automatically add
encapsulation CISCO on Inteface-dlci

Config Prior to AutoQoS:

interface Serial0/1/0
 no ip address
 encapsulation frame-relay IETF
 no frame-relay inverse-arp
 frame-relay lmi-type ansi
!
interface Serial0/1/0.1 point-to-point
 ip address 10.10.112.2 255.255.255.0
 ip ospf mtu-ignore
 snmp trap link-status
 frame-relay interface-dlci 102
---

Configuration After AutoQoS

interface Serial0/1/0.1 point-to-point
 ip address 10.10.112.2 255.255.255.0
 ip ospf mtu-ignore
 snmp trap link-status
 frame-relay interface-dlci 102 CISCO <<<<<<- Encapsulation Cisco
class AutoQoS-FR-Se0/1/0-1
  auto qos voip trust

Prior to auto configuration on my primary interface frame-relay
encapsulation is IETF.

I think encapsulation should be match after autoqos.

Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] [CCIE VOICE - Answer the Dial-Plan questions.

[Ramcharan Arya]

Hi ,

I suggest you work on VOL 1 Lab 5A & 5C this will help you understanding
dialplan.Both labs are very good for call routing section.


Regards,
Ramcharan Arya
CCIE # 28926

On Fri, Jan 25, 2013 at 8:58 AM, ie ravindra  wrote:

> .
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Custom Background image for phones registered to cme

[Ramcharan Arya]

Hi,

Another option is there is a FTP server available to download CUE license.

You can copy backgroud image on FTP server ( I believe it is available on
pc given for testing).

ip ftp username ipexpert
ip ftp password ipexpert

copy ftp flash:

tclsh
puts [open "flash:Desktops/320x196x4/List.xml" w+] {


}
tclq

tftp-server flash:Desktops/320x196x4/TN-greenbaypackers.png
tftp-server flash:Desktops/320x196x4/greenbaypackers.png
tftp-server flash:Desktops/320x196x4/List.xml

do wr mem

Thanks,
Ramcharan Arya
CCIE # 28926 (Routing & Switching)


On Sun, Jan 20, 2013 at 7:22 PM, sanity insanity <
networksanitytoinsan...@gmail.com> wrote:

> What is the easiest way of getting a customized background image and
> configuring it for cme  ip phones . Given that there is no TFTP server , we
> just need to use the callmanger . Please illustrate the steps...
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Gatekeeper in Single zone : Call Processing engine prioritize

[Ramcharan Arya]

Hello Steffen,

One of the requirement of this task:

you are not allowed to use zone prefixes in this task. What are the other
way to achieve this.

Regards,
Ramcharan Arya

How should we send call to SUB vs PUB in this given situation and we are
not allow to

On Wed, Jan 9, 2013 at 12:14 AM, Steffen Bruening wrote:

> You can define a gw-priority for the trunks to each endpoint.
>
> Am Mittwoch, 9. Januar 2013 schrieb Ramcharan Arya :
>
> Hello,
>>
>> I have a small query about Gatekeeper in single zone configuration it is
>> prefer PUB as call processing ( as per ARQ message).
>>
>> if lab requirement says make subscriber as call processing engine then it
>> does not meet requirement.
>>
>> Does any one know the answer what is the solution of this tricky
>> situation.
>>
>> Regards,
>> Ramcharan Arya
>> CCIE # 28926
>>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Gatekeeper in Single zone : Call Processing engine prioritize

[Ramcharan Arya]

Hello,

I have a small query about Gatekeeper in single zone configuration it is
prefer PUB as call processing ( as per ARQ message).

if lab requirement says make subscriber as call processing engine then it
does not meet requirement.

Does any one know the answer what is the solution of this tricky situation.

Regards,
Ramcharan Arya
CCIE # 28926
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Any good blogs link on DB Replication Troubleshooting ?

[Ramcharan Arya]

Hello,

I am running on db replication issues very often.

PUB & Sub status are in these combinations 2:0, 3:0, 3:3, 4:4,

Is any these structured procedure to fix these different state of db
replications.

I have search IPX blogs but could not find information I was looking for.

Can you someone please share detail procedures about how to fix DB
replication between in following state:

Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] OWLE Lab 4 : Task 6.3 :Voicemail Forward to Alternate extension

[Ramcharan Arya]

Thank you everyone for your swift response on this.

Imaging If this site becomes as SRST. Does this service parameter can still
meet telco requirement.

If this is H.323 gateway then it is easy to fix in IOS gateway.

Regards,
Ramcharan Arya



On Fri, Jan 4, 2013 at 8:36 PM, Cory Gray  wrote:

> Without that parameter you should at least see the DN of the Unity Port as
> the calling number.  Are you doing a SIP integration?  I am not sure what
> would be the calling number in that situation.
>
> Sent from my iPhone
>
> On Jan 4, 2013, at 9:14 PM, "William Bell"  wrote:
>
> Check CUCM service parameters "Display Original Calling Number on Transfer
> from Unity". Set this to true.
>
> HTH.
>
> -Bill
> --
> William Bell
> blog: http://ucguerrilla.com
> twitter: @ucguerrilla
>
>
>
> On Jan 4, 2013, at 6:22 PM, Ramcharan Arya wrote:
>
> Hello,
>
> Have issue with particular task:
>
> When someone call ext 2002 ( Gwashington) during voicemail greeting when
> press 9 then call should forward to external number 4678124 ( PSTN Line).
>
> This is working as expected.
>
> Below is debug isqn q931 output:
>
> HQ-RTR(config)#
> Jan  4 23:09:57.642: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8
> callref = 0x0004
> Cause i = 0x8290 - Normal call clearing
> Jan  4 23:09:57.654: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8  callref =
> 0x8004
> Jan  4 23:09:57.686: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8
> callref = 0x0004
> Jan  4 23:12:44.994: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callref =
> 0x0005
> Bearer Capability i = 0x8090A2
> Standard = CCITT
> Transfer Capability = Speech
> Transfer Mode = Circuit
> Transfer Rate = 64 kbit/s
> Channel ID i = 0xA98388
> Exclusive, Channel 8
> Display i = 'VoiceMail'
> Called Party Number i = 0xC1, '4678124'
> Plan:ISDN, Type:Subscriber(local)
> Jan  4 23:12:45.042: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8  callref
> = 0x8005
> Channel ID i = 0xA98388
> Exclusive, Channel 8
> Jan  4 23:12:45.058: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8  callref
> = 0x8005
> Progress Ind i = 0x8188 - In-band info or appropriate now
> available
> Jan  4 23:12:55.886: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8
> callref = 0x0005
> Cause i = 0x8290 - Normal call clearing
>
> This is no sending any calling number when Unity make call to external
> phone. This does not meet Telco requirements.
>
> Is there any way to fix this problem when call goes out to external number
> from PSTN it should show calling number in isdn q931. Any thought.?
>
> Thanks & Regards,
> Ramcharan Arya
>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] OWLE Lab 4 : Task 6.3 :Voicemail Forward to Alternate extension

[Ramcharan Arya]

Hello,

Have issue with particular task:

When someone call ext 2002 ( Gwashington) during voicemail greeting when
press 9 then call should forward to external number 4678124 ( PSTN Line).

This is working as expected.

Below is debug isqn q931 output:

HQ-RTR(config)#
Jan  4 23:09:57.642: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8  callref
= 0x0004
Cause i = 0x8290 - Normal call clearing
Jan  4 23:09:57.654: ISDN Se0/0/0:23 Q931: RX <- RELEASE pd = 8  callref =
0x8004
Jan  4 23:09:57.686: ISDN Se0/0/0:23 Q931: TX -> RELEASE_COMP pd = 8
callref = 0x0004
Jan  4 23:12:44.994: ISDN Se0/0/0:23 Q931: TX -> SETUP pd = 8  callref =
0x0005
Bearer Capability i = 0x8090A2
Standard = CCITT
Transfer Capability = Speech
Transfer Mode = Circuit
Transfer Rate = 64 kbit/s
Channel ID i = 0xA98388
Exclusive, Channel 8
Display i = 'VoiceMail'
Called Party Number i = 0xC1, '4678124'
Plan:ISDN, Type:Subscriber(local)
Jan  4 23:12:45.042: ISDN Se0/0/0:23 Q931: RX <- CALL_PROC pd = 8  callref
= 0x8005
Channel ID i = 0xA98388
Exclusive, Channel 8
Jan  4 23:12:45.058: ISDN Se0/0/0:23 Q931: RX <- ALERTING pd = 8  callref =
0x8005
Progress Ind i = 0x8188 - In-band info or appropriate now available
Jan  4 23:12:55.886: ISDN Se0/0/0:23 Q931: TX -> DISCONNECT pd = 8  callref
= 0x0005
Cause i = 0x8290 - Normal call clearing

This is no sending any calling number when Unity make call to external
phone. This does not meet Telco requirements.

Is there any way to fix this problem when call goes out to external number
from PSTN it should show calling number in isdn q931. Any thought.?

Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] OWLE Lab 4 : Task 8.1 : Directed call park retrieval

[Ramcharan Arya]

Hi,

Task requirement is below:

OWLE Lab 4 : Task 8.1
User at Site A phone 2 can transfer an active call to extension 2456.
Ensure that the user can retrieve the call by dialing *2456.

I have configured directed call park and call is successfully park bu
unable to retrieve by dialing *2456.

When I press *2456 is play reorder tone.

Assuming enterprise parameters are setup correctly. Please suggest how this
can be achive.

Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUCM-CUPS integration

[Ramcharan Arya]

check your inbound ACL and proxy domain setting.


On Wed, Jan 2, 2013 at 10:54 AM, Suresh Bhandari  wrote:

> Using UCM / UCx 7 and UPS 8.0 in VM in home lab.
>
> UCM and UCx integrated successfully using SCCP.
>
> UCM has everything configured, including SIP Trunk, required Users etc.
>
> Configured CUPS, and I can see that the users created in UCM are populated
> in CUPS.
>
> Diagnostics>System Troubleshooter shows that things required for basic
> integration are okay, a snapshot is attached (1.png).
>
> All *Feature Services *except three are up and running. Services not
> running are:
>
> Cisco UP XCP XMPP Federation Connection Manager
> Cisco UP XCP Message Archiver
> Cisco UP XCP Directory Service
>
> Have yet to go detail on the purposes of these services.
>
> All *Network Services *are up and running.
>
> Now my problem is that when I check the CUPS server in Cluster Topology,
> all the services for this server seems UNKNOWN state, snapshot attached
> (2.png). I am trying to connect to the CUPC in Deskphone mode, but... :(
>
> Does anyone faced this issue earlier? Please help.
>
> --
> Suresh Bhandari
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 82, Issue 54

[Ramcharan Arya]

Hi MJ

Can you try dtmf-relay sip-notify on CUE dial-peer.

Thanks,
Ramcharan Arya


On Fri, Dec 28, 2012 at 7:37 PM, wrote:

> Send CCIE_Voice mailing list submissions to
> ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
> ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
> ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>1. Re: [OSL | CCIE_Security] The only guy who is CCIE in 6
>   (Sheraz Sheraz)
>2. CUE with CUCM (CCIEing)
>3. Re: CUE with CUCM (Hesham Abdelkereem)
>4. Re: CUE with CUCM (Bill Lake)
>5. Re: In cme -srst mode the calls to CUE do not work (Amaia Lesta)
>
>
> --
>
> Message: 1
> Date: Sat, 29 Dec 2012 00:07:43 +0500
> From: Sheraz Sheraz 
> To: Jay McMickle 
> Cc: "ccie...@onlinestudylist.com" ,
> "ccie_voice@onlinestudylist.com" ,
> "ccie...@onlinestudylist.com" ,
> "ccie_secur...@onlinestudylist.com"
> ,
> "ccie_wirel...@onlinestudylist.com"
> 
> Subject: Re: [OSL | CCIE_Voice] [OSL | CCIE_Security] The only guy who
> is  CCIE in 6
> Message-ID: 
> Content-Type: text/plain; charset="iso-8859-1"
>
> Yes dear i meant to say all of 6 and active! not all of 8. the most
> hardest CCIE track is CCIE data center according to my observation let see
> how much CCIE gona come out with CCIE data center.
>
> Regards
> Sheraz
>
> CC: ccie...@onlinestudylist.com; ccie_secur...@onlinestudylist.com;
> ccie...@onlinestudylist.com; ccie_wirel...@onlinestudylist.com;
> ccie_voice@onlinestudylist.com
> From: jay.mcmic...@yahoo.com
> Subject: Re: [OSL | CCIE_Security] The only guy who is CCIE in 6
> Date: Fri, 28 Dec 2012 08:21:49 -0600
> To: she...@live.com
>
> That's awesome, but one question. You stated "all" 6, and maybe I took out
> of context, but isn't there 7/8 IE tracks (if you count both SP tracks).
> See here that Cisco states 8 active IE tracks.
> http://www.cisco.com/web/learning/le3/ccie/track_comparison/index.html
> Is Roman the only person to hold 6? I thought someone had 7?
>
> Regards,Jay McMickle- CCIE #35355 (RS)Sent from my iPhone 5
> On Dec 28, 2012, at 6:59 AM, Sheraz Sheraz  wrote:
>
>
>
>
>  Roman Rodichev 6x CCIE #7927 ( yes six ). Roman is the first person in
>  the world to hold all 6 active CCIE certifications!!! He is also the
> instructor, content developer, and owner of ieMentor
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
> -- next part --
> An HTML attachment was scrubbed...
> URL:
> 
>
> --
>
> Message: 2
> Date: Sat, 29 Dec 2012 01:15:31 +0300
> From: CCIEing 
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] CUE with CUCM
> Message-ID:
> <
> caehpkkkws_fvonxva52l4_mfuoef9mq8svwm3zxelv7nbpi...@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Hi All,
>
> I want to make sure that the CUE integration with CUCM is included of the
> LAB exam , right ?
>
>
> Thanks
> -- next part --
> An HTML attachment was scrubbed...
> URL:
> 
>
> --
>
> Message: 3
> Date: Fri, 28 Dec 2012 14:34:02 -0800
> From: Hesham Abdelkereem 
> To: CCIEing 
> Cc: ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] CUE with CUCM
> Message-ID: 
> Content-Type: text/plain; charset=iso-8859-1
>
> Yes it's but not necessarily all the attempts you will do.
> But yes CUE with CUCM is included but not in all the models just for your
> information
> On Dec 28, 2012, at 2:15 PM, CCIEing  wrote:
>
> > Hi All,
> >
> > I want to make sure that the CUE integration with CUCM is included of
> the LAB exam , right ?
> >
> >
> > Thanks
> >
> >
> > ___
> > For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.co

[OSL | CCIE_Voice] OWLE : lab 4 : Task 6.1 : Unable to set default pin

[Ramcharan Arya]

Hello,

I have trouble with below task in Unity connection. When I import these
users I am unable to set their PIN 12345. It is showing error message.

Import users “gwashington” and “jadams” into the Unity Connection server
ensuring the PIN is “12345”.

I already change password length and uncheck trivial password option.

Can someone please suggest fix/workaround of this issue.

Regards,
Ramcharan Arya
CCIE # 28926 ( R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUCM slow while changing service parameter

[Ramcharan Arya]

Hi Bill,

This is an ESXi 5.1 think deployment.

Regards,
Ramcharan Arya



On Sat, Dec 22, 2012 at 11:33 AM, Bill Lake  wrote:

> Are you running this in VM inside an OS or ESXi
>
>
>
> On Sat, Dec 22, 2012 at 7:56 AM, Ramcharan Arya 
> wrote:
>
>> Hello,
>>
>> My CUCM response is very slow when I update Cisco Callmanager service
>> paramter. It is running on vm.
>>
>> Can you please suggest is there any setting on vm to improve the
>> performance.
>>
>> Rest everything works normal.
>>
>> Please suggest if you have any technical detail to share about this.
>>
>> Regards,
>> Ramcharan Arya
>>
>>
>> ___
>> For more information regarding industry leading CCIE Lab training, please
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CUCM slow while changing service parameter

[Ramcharan Arya]

Yes MOH is configured as per task.

Is there any workaroun/solution to fix this problem.

Regards,
Ramcharan Arya

On Sat, Dec 22, 2012 at 9:04 AM, scubajasona  wrote:

> Is multicast moh enabled? Seems enabling multicast slows my vmware
> workstation down. Floods 239.x.x.x nonstop.
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CUCM slow while changing service parameter

[Ramcharan Arya]

Hello,

My CUCM response is very slow when I update Cisco Callmanager service
paramter. It is running on vm.

Can you please suggest is there any setting on vm to improve the
performance.

Rest everything works normal.

Please suggest if you have any technical detail to share about this.

Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] VOL1 : Lab 9 Task 2: BACD Problem

[Ramcharan Arya]

Hi,

Finally my problem is fixed. In VOL 1 Lab 4 I change H323 port 1820 and I
did not reload my router after lab 4.

When Cisco TAC run command

debug h245 asn1

TAC  found ISDN cause code and trace the problem source. After change
port 1720 under voice service voip it fixed the problem.


Regards,
Ramcharan Arya
CCIE # 28926(R&S)


On Mon, Dec 17, 2012 at 6:43 PM, Ramcharan Arya wrote:

> Hello Bill,
>
> I have bacd tcl file into flash memory.
>
> Brach2#show flash | inc tcl
> 118  25804 Dec 15 2012 18:45:58 bacdprompts/app-b-acd-2.1.2.2.tcl
> 119  36667 Dec 15 2012 18:46:14 bacdprompts/app-b-acd-aa-2.1.2.2.tcl
> Brach2#
>
> when I call from ext 3001 to aa pilot ext 3500 it is playing reorder tone
> with unknown number.
>
> --
>
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Calling Number=3500, Called Number=3500, Peer Info
> Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Calling Number=3500, Called Number=3500, Peer Info
> Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
> Dec 18 00:43:21.285: //-1//DPM/dpAssociateIncomingPeerCore:
>Calling Number=3500, Called Number=, Voice-Interface=0x0,
>Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search
> Type=PEER_TYPE_VOICE,
>Peer Info Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.285: //-1//DPM/dpAssociateIncomingPeerCore:
>Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=222
> Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersCore:
>Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
> Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
>
> I used new translation rule you provide me it is very nice way to strip
> DNIS  :-)
>
> I will continue to troubleshoot this until I fixed it. May be I can open a
> TAC case later if it unresolved.
>
> Thanks,
> Ramcharan Arya
>
>
> On Mon, Dec 17, 2012 at 5:10 PM, Bill Lake  wrote:
>
>> This should help you avoid the dual results (one time getting +343500 and
>> one time getting 3500
>>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Is there any issue with ipexpert.com?

[Ramcharan Arya]

Thank you for checking. Yes I can see site is up now. I did notify support
via email prior to sending email out to group.

Regards,
Ramcharan Arya


On Thu, Dec 20, 2012 at 6:57 AM, Chrysostomos Christofi <
ch.christ...@logicom.net> wrote:

>  Hi
>
> ** **
>
> Its working ok
>
> ** **
>
> But if you have an issue send an email to support 
>
> ** **
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *Ramcharan Arya
> *Sent:* Πέμπτη, 20 Δεκεμβρίου 2012 2:02 μμ
> *To:* ccie_voice@onlinestudylist.com
> *Subject:* [OSL | CCIE_Voice] Is there any issue with ipexpert.com?
>
> ** **
>
> Hello,
>
> Can someone please check ipexpert.com it seems site is not working. I am
> unable to open pdf files and watch streaming videos.
>
> My Internet connection is good because youtube is working fine.
>
> Regards,
> Ramcharan Arya
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Is there any issue with ipexpert.com?

[Ramcharan Arya]

Hello,

Can someone please check ipexpert.com it seems site is not working. I am
unable to open pdf files and watch streaming videos.

My Internet connection is good because youtube is working fine.

Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] VOL1 : Lab 9 Task 2: BACD Problem

[Ramcharan Arya]

Hi Everyone,

I am sending my Branch2 router configuration can someone please try this
config in your router. I am trying to eliminate if my .tcl script file
might have some problem.

my IOS ver : System image file is
"flash:c2800nm-adventerprisek9_ivs_li-mz.124-22.T5.bin"

Many Thanks,

Regards
Ramcharan Arya


On Mon, Dec 17, 2012 at 6:43 PM, Ramcharan Arya wrote:

> Hello Bill,
>
> I have bacd tcl file into flash memory.
>
> Brach2#show flash | inc tcl
> 118  25804 Dec 15 2012 18:45:58 bacdprompts/app-b-acd-2.1.2.2.tcl
> 119  36667 Dec 15 2012 18:46:14 bacdprompts/app-b-acd-aa-2.1.2.2.tcl
> Brach2#
>
> when I call from ext 3001 to aa pilot ext 3500 it is playing reorder tone
> with unknown number.
>
> --
>
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Calling Number=3500, Called Number=3500, Peer Info
> Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Calling Number=3500, Called Number=3500, Peer Info
> Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
> Dec 18 00:43:21.285: //-1//DPM/dpAssociateIncomingPeerCore:
>Calling Number=3500, Called Number=, Voice-Interface=0x0,
>Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search
> Type=PEER_TYPE_VOICE,
>Peer Info Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.285: //-1//DPM/dpAssociateIncomingPeerCore:
>Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=222
> Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersCore:
>Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
> Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
> Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Match Rule=DP_MATCH_DEST; Called Number=3500
> Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersCore:
>Result=Success(0) after DP_MATCH_DEST
> Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersMoreArg:
>Result=SUCCESS(0)
>List of Matched Outgoing Dial-peer(s):
>  1: Dial-peer Tag=222
>
> I used new translation rule you provide me it is very nice way to strip
> DNIS  :-)
>
> I will continue to troubleshoot this until I fixed it. May be I can open a
> TAC case later if it unresolved.
>
> Thanks,
> Ramcharan Arya
>
>
> On Mon, Dec 17, 2012 at 5:10 PM, Bill Lake  wrote:
>
>> This should help you avoid the dual results (one time getting +343500 and
>> one time getting 3500
>>
>
>

Re: [OSL | CCIE_Voice] VOL1 : Lab 9 Task 2: BACD Problem

[Ramcharan Arya]

Hello Bill,

I have bacd tcl file into flash memory.

Brach2#show flash | inc tcl
118  25804 Dec 15 2012 18:45:58 bacdprompts/app-b-acd-2.1.2.2.tcl
119  36667 Dec 15 2012 18:46:14 bacdprompts/app-b-acd-aa-2.1.2.2.tcl
Brach2#

when I call from ext 3001 to aa pilot ext 3500 it is playing reorder tone
with unknown number.

--

Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
   Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
   Match Rule=DP_MATCH_DEST; Called Number=3500
Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
   Result=Success(0) after DP_MATCH_DEST
Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersMoreArg:
   Result=SUCCESS(0)
   List of Matched Outgoing Dial-peer(s):
 1: Dial-peer Tag=222
Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
   Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
   Match Rule=DP_MATCH_DEST; Called Number=3500
Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersCore:
   Result=Success(0) after DP_MATCH_DEST
Dec 18 00:43:21.285: //-1/C08E1E428089/DPM/dpMatchPeersMoreArg:
   Result=SUCCESS(0)
   List of Matched Outgoing Dial-peer(s):
 1: Dial-peer Tag=222
Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
   Calling Number=3500, Called Number=3500, Peer Info
Type=DIALPEER_INFO_SPEECH
Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
   Match Rule=DP_MATCH_DEST; Called Number=3500
Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
   Result=Success(0) after DP_MATCH_DEST
Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersMoreArg:
   Result=SUCCESS(0)
   List of Matched Outgoing Dial-peer(s):
 1: Dial-peer Tag=222
Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
   Calling Number=3500, Called Number=3500, Peer Info
Type=DIALPEER_INFO_SPEECH
Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
   Match Rule=DP_MATCH_DEST; Called Number=3500
Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersCore:
   Result=Success(0) after DP_MATCH_DEST
Dec 18 00:43:21.285: //-1//DPM/dpMatchPeersMoreArg:
   Result=SUCCESS(0)
   List of Matched Outgoing Dial-peer(s):
 1: Dial-peer Tag=222
Dec 18 00:43:21.285: //-1//DPM/dpAssociateIncomingPeerCore:
   Calling Number=3500, Called Number=, Voice-Interface=0x0,
   Timeout=TRUE, Peer Encap Type=ENCAP_VOIP, Peer Search
Type=PEER_TYPE_VOICE,
   Peer Info Type=DIALPEER_INFO_SPEECH
Dec 18 00:43:21.285: //-1//DPM/dpAssociateIncomingPeerCore:
   Result=Success(0) after DP_MATCH_ORIGINATE; Incoming Dial-peer=222
Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersCore:
   Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersCore:
   Match Rule=DP_MATCH_DEST; Called Number=3500
Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersCore:
   Result=Success(0) after DP_MATCH_DEST
Dec 18 00:43:21.289: //-1//DPM/dpMatchPeersMoreArg:
   Result=SUCCESS(0)
   List of Matched Outgoing Dial-peer(s):
 1: Dial-peer Tag=222
Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersCore:
   Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersCore:
   Match Rule=DP_MATCH_DEST; Called Number=3500
Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersCore:
   Result=Success(0) after DP_MATCH_DEST
Dec 18 00:43:21.289: //-1/C08E1E428089/DPM/dpMatchPeersMoreArg:
   Result=SUCCESS(0)
   List of Matched Outgoing Dial-peer(s):
 1: Dial-peer Tag=222

I used new translation rule you provide me it is very nice way to strip
DNIS  :-)

I will continue to troubleshoot this until I fixed it. May be I can open a
TAC case later if it unresolved.

Thanks,
Ramcharan Arya


On Mon, Dec 17, 2012 at 5:10 PM, Bill Lake  wrote:

> This should help you avoid the dual results (one time getting +343500 and
> one time getting 3500
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] VOL1 : Lab 9 Task 2: BACD Problem

[Ramcharan Arya]

ec 17 16:27:23.404: //-1//DPM/dpMatchPeersCore:
   Result=Success(0) after DP_MATCH_DEST
Dec 17 16:27:23.404: //-1//DPM/dpMatchPeersMoreArg:
   Result=SUCCESS(0)
   List of Matched Outgoing Dial-peer(s):
 1: Dial-peer Tag=222
Dec 17 16:27:23.404: //-1/78A3AD858034/DPM/dpMatchPeersCore:
   Calling Number=, Called Number=3500, Peer Info Type=DIALPEER_INFO_SPEECH
Dec 17 16:27:23.404: //-1/78A3AD858034/DPM/dpMatchPeersCore:
   Match Rule=DP_MATCH_DEST; Called Number=3500
Dec 17 16:27:23.404: //-1/78A3AD858034/DPM/dpMatchPeersCore:
   Result=Success(0) after DP_MATCH_DEST
Dec 17 16:27:23.404: //-1/78A3AD858034/DPM/dpMatchPeersMoreArg:
   Result=SUCCESS(0)
   List of Matched Outgoing Dial-peer(s):
 1: Dial-peer Tag=222
Dec 17 16:27:23.412: ISDN Se0/0/0:15 Q931: TX -> CALL_PROC pd = 8  callref
= 0x80D4
Channel ID i = 0xA98381
Exclusive, Channel 1
Dec 17 16:27:23.420: ISDN Se0/0/0:15 Q931: TX -> DISCONNECT pd = 8  callref
= 0x80D4
Cause i = 0x80A6 - Network out of order
Dec 17 16:27:23.432: ISDN Se0/0/0:15 Q931: RX <- RELEASE pd = 8  callref =
0x00D4
Cause i = 0x82E4 - Invalid information element contents


Can you please suggest what might be causing this problem.

Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 82, Issue 15

[Ramcharan Arya]

Hi,

Also check igmp snooping on LAN switch.

Regards,
Ramcharan Arya
CCIE # 28926 ( R&S)



On Thu, Dec 13, 2012 at 1:23 PM, wrote:

> Send CCIE_Voice mailing list submissions to
> ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
> ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
> ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>1. Blueprint Change (Michael Davis)
>2. Re: Blueprint Change (Marko Milivojevic)
>3. Purchasing updated rea l labs LAB -->7 (james jacob)
>4. Re: Hyphothetical Voice Infrastructure Issue Question
>   (Mark Thrash (marthras))
>5. Re: Hyphothetical Voice Infrastructure Issue Question
>   (Mark Thrash (marthras))
>
>
> --
>
> Message: 1
> Date: Thu, 13 Dec 2012 09:20:17 -0800 (PST)
> From: Michael Davis 
> To: "ccie_voice@onlinestudylist.com" 
> Subject: [OSL | CCIE_Voice] Blueprint Change
> Message-ID:
> <1355419217.99823.yahoomail...@web126004.mail.ne1.yahoo.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> The Blueprint for voice will change, and I was also told soon. When I took
> my first attempt at my CCIE voice this week, I was told it "weill not be as
> quickly as you would think" by the proctor. Vik, on the other hand, is
> convinced it will sooner that latter.
> ?
> You just have to keep checking the Cisco web site for updates.
> ?
> Michael
> -- next part --
> An HTML attachment was scrubbed...
> URL:
> 
>
> --
>
> Message: 2
> Date: Thu, 13 Dec 2012 10:09:59 -0800
> From: Marko Milivojevic 
> To: Michael Davis 
> Cc: "ccie_voice@onlinestudylist.com" 
> Subject: Re: [OSL | CCIE_Voice] Blueprint Change
> Message-ID:
>  gtuknepshhc...@mail.gmail.com>
> Content-Type: text/plain; charset=UTF-8
>
> Remember that even when they announce the new blueprint, it will take
> 6 months before it goes active.
>
> --
> Marko Milivojevic - CCIE #18427 (SP R&S)
> Senior CCIE Instructor - IPexpert
>
> On Thu, Dec 13, 2012 at 9:20 AM, Michael Davis
>  wrote:
> > The Blueprint for voice will change, and I was also told soon. When I
> took
> > my first attempt at my CCIE voice this week, I was told it "weill not be
> as
> > quickly as you would think" by the proctor. Vik, on the other hand, is
> > convinced it will sooner that latter.
> >
> > You just have to keep checking the Cisco web site for updates.
> >
> > Michael
> >
> > ___
> > For more information regarding industry leading CCIE Lab training, please
> > visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> > www.PlatinumPlacement.com
>
>
> --
>
> Message: 3
> Date: Fri, 14 Dec 2012 00:38:04 +0530
> From: james jacob 
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] Purchasing updated rea l labs LAB -->7
> Message-ID:
>  919ok-npr9jdbseyylrlt9ej...@mail.gmail.com>
> Content-Type: text/plain; charset="iso-8859-1"
>
> Guys i am purchasing real lab please let us know if anyone here like to
> share the cost so that we can get it in cheaper rate
>
> Below is the link
>
> http://www.c e r t k n o w le d g
> e.com/ipb/topic/24-ccievoicelabscom-real-labs/page__st__140
>
> Email me if anyone is interested further (jamesja...@gmail.com) on google
> talk
>
> thanks
> -- next part --
> An HTML attachment was scrubbed...
> URL:
> 
>
> --
>
> Message: 4
> Date: Thu, 13 Dec 2012 18:44:17 +
> From: "Mark Thrash (marthras)" 
> To: Michael Davis ,
> "ccie_voice@onlinestudylist.com" 
> Subject: Re: [OSL | CCIE_Voice] Hyphothetical Voice Infrastructure
> Issue Question
> Message-ID:
> <079142a0a27a8641bdac42dbd9eccdda15515...@xmb-rcd-x12.cisco.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Verified CDP ver 2 running?
> __
> Mark Thrash
> marth...@cisco.com<mailto:marth...

[OSL | CCIE_Voice] RSVP with Moh between HQPh1 and BR1Ph1

[Ramcharan Arya]

Hello,

I have little issue with my task. I have enable RSVP call-agent between HQ
Ph1 and BR1 Phone.

Show ip rsvp reservation showing active call at 24K for G729r8 codec.

For BR1 I am using SUB as Multicast MOH audio source. It is part of
Device-pool IOS which all region setting G711 codec.

When I press hold key on HQ Ph1 :

1. Show ip rsvp res still showing once active call at 24K
2. On CUCM CLI SUb is showing as Multicast  stream
3. On BR1 I hear tone on Hold ( No music on hold without multicast)

Does it mean I need to add codec pass-through in my SCCP profile for MTP.?

Please suggest.

Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CUCM TFTP service restart from CLI

[Ramcharan Arya]

Hello,

Can you someone please tell me command syntax how to restart Cisco Tftp
service from CUCM CLI.?

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 (R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CME 7.0.1 Call Park presence monitoring/BLF Speed dial

[Ramcharan Arya]

Thank you !

Yes you are right  BLS speed for call park slot feature is in CME 7.1.
However I am running CME 7.0.1  in my lab rack that is why it did not work.

Regards,
Ramcharan Arya


On Mon, Nov 19, 2012 at 6:30 PM, William Bell  wrote:

> IIRC, using BLF speed dial to monitor call park slot status was introduced
> in CME 7.1.  You can use monitor on a line. I just tested this and it
> appears to work as desired. Here is a sample:
>
>
> ephone-dn  6
>  number 1001 no-reg primary
>  park-slot
>  allow watch
> !
> ephone  1
>  device-security-mode none
>  description SiteC Phone 1
>  mac-address ..
>  ephone-template 2
>  type 7961
>  no dnd feature-ring
>  button  1f1 2c3,4 3m6
> !
>
>
> With the above config, if I initiate a Call Park from any station on the
> CME button 3 on ephone 1 lights up. The button can also be used to "speed
> dial" the call park slot.
>
>
> HTH.
>
> -Bill
>
> --
> William Bell
> blog: http://ucguerrilla.com
> twitter: @ucguerrilla
>
>
>
> On Nov 19, 2012, at 5:25 PM, Ramcharan Arya wrote:
>
> Hello,
>
> Need help on setting up presence in CME for call park. I have enable
> presence and BLF Speeddial when I park call BFL does not glow.
>
> Can you please suggest  any other way to monitor call park slot.
>
> Thanks,
> Ramcharan Arya
>
>
> On Mon, Nov 12, 2012 at 2:13 PM, Ramcharan Arya 
> wrote:
>
>> Hello,
>>
>> I have am working on CME call pickup excercise. I have testing call park
>> and pickup, When I press pickup software I am getting  getting fast  tone.
>>
>>
>> Here is my configuration.
>>
>>
>> ephone-dn  17 octo-line
>> number 4731
>> label 4731
>> description BR2 Ph1
>> !
>> ephone-dn  18 octo-line
>> number 4732
>> label 4732
>> description BR2 Ph2
>> !
>> ephone-dn  19  octo-line
>> number 4733
>> label 4733
>> Description BR2 Ph3
>>
>> !
>> ephone-template  1
>>  softkeys idle  Newcall Pickup Redial Dnd
>>  softkeys connected  Hold Park Trnsfer Endcall Flash
>>
>> ephone  15
>> ephone-template 1
>> device-security-mode none
>> mac-address 0CD9.9690.6FC2
>> type 7962
>> button  1:17
>> !
>> ephone  17
>> ephone-template 1
>> device-security-mode none
>> mac-address 0CD9.9690.6CA8
>> type 7962
>> button  1:18
>> !
>> ephone  18
>> ephone-template 1
>> device-security-mode none
>> mac-address 34BD.C82D.A1D7
>> type 7962
>> button  1:19
>> !
>> ephone-dn  16
>>  number 4735
>>  park-slot timeout 20 limit 2 recall
>>  description park slot for All Users
>> !
>> telephony-service
>> call-park system application
>> !
>>
>>
>> Testing procedure:
>>
>> 1. Call from ext 4731 to ext 4732
>> 2. On ext 4732 answer the phone and put call on park
>> 3. When I press pickup softkey to retrieve call on park is not working
>> getting busy tone.
>>
>>
>> Can you please tell me if I am doing something wrong.
>>
>> Thanks,
>> Ramcharan Arya
>> CCIE # 28926(R&S)
>>
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
>
>
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CME 7.0.1 Call Park presence monitoring/BLF Speed dial

[Ramcharan Arya]

Hello,

Need help on setting up presence in CME for call park. I have enable
presence and BLF Speeddial when I park call BFL does not glow.

Can you please suggest  any other way to monitor call park slot.

Thanks,
Ramcharan Arya


On Mon, Nov 12, 2012 at 2:13 PM, Ramcharan Arya wrote:

> Hello,
>
> I have am working on CME call pickup excercise. I have testing call park
> and pickup, When I press pickup software I am getting  getting fast  tone.
>
>
> Here is my configuration.
>
>
> ephone-dn  17 octo-line
> number 4731
> label 4731
> description BR2 Ph1
> !
> ephone-dn  18 octo-line
> number 4732
> label 4732
> description BR2 Ph2
> !
> ephone-dn  19  octo-line
> number 4733
> label 4733
> Description BR2 Ph3
>
> !
> ephone-template  1
>  softkeys idle  Newcall Pickup Redial Dnd
>  softkeys connected  Hold Park Trnsfer Endcall Flash
>
> ephone  15
> ephone-template 1
> device-security-mode none
> mac-address 0CD9.9690.6FC2
> type 7962
> button  1:17
> !
> ephone  17
> ephone-template 1
> device-security-mode none
> mac-address 0CD9.9690.6CA8
> type 7962
> button  1:18
> !
> ephone  18
> ephone-template 1
> device-security-mode none
> mac-address 34BD.C82D.A1D7
> type 7962
> button  1:19
> !
> ephone-dn  16
>  number 4735
>  park-slot timeout 20 limit 2 recall
>  description park slot for All Users
> !
> telephony-service
> call-park system application
> !
>
>
> Testing procedure:
>
> 1. Call from ext 4731 to ext 4732
> 2. On ext 4732 answer the phone and put call on park
> 3. When I press pickup softkey to retrieve call on park is not working
> getting busy tone.
>
>
> Can you please tell me if I am doing something wrong.
>
> Thanks,
> Ramcharan Arya
> CCIE # 28926(R&S)
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Vol1 - Lab 6-A SRST Testing correct procedure

[Ramcharan Arya]

Hi All,
I am working on Vol-1 Lab 6A High availability. As per DSG instruction it
is describe to stop CCM services on Pub & Sub.  However 5 Lab Handbook lab
4 has different approach by adding static route on Branch A/Site B.

If later apporach is appropriate then these workbook need updates so
students do not follow inappropriate procedure.

Another query about SRST which option is appropriate ccm-manager-fallback
or telephony-services.


Please share your inputs on this.

Thanks,
Ramcharan Arya
CCIE # 28926(R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 81, Issue 27

[Ramcharan Arya]

Hello,

I ran into similar issue. Please follow Bill's suggestion also you need to
check route pattern for AAR is correct. If it does not match then
annunciator message will play.

Thanks,
Ramcharan Arya


On Wed, Nov 14, 2012 at 9:05 PM, wrote:

> Send CCIE_Voice mailing list submissions to
> ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
> ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
> ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>1. AAR Not Working (Barrera, Hugo)
>2. Re: AAR Not Working (Bill)
>
>
> --
>
> Message: 1
> Date: Thu, 15 Nov 2012 01:08:05 +
> From: "Barrera, Hugo" 
> To: "ccie_voice@onlinestudylist.com" 
> Subject: [OSL | CCIE_Voice] AAR Not Working
> Message-ID:
> <0bebb671101b304eb5b3b3d587c6d75201e...@nxca05exch11.nexusis.com>
> Content-Type: text/plain; charset="us-ascii"
>
> Hi,
>
> I am doing AAR, Lab 6 Volume 1, but I just can't get it to work correctly.
> The following is my programming task list and what I witnessed:
>
> Call flow = HQ Phone 2 x5002 calls BR1 Phone 2 x1002
>
>
> 1.  Enabled AAR globally in service parameters
>
> 2.  Created my AAR-PT and AAR-CSS
>
> o   The AAR-CSS contains the AAR-PT and Internal-PT
>
> 3.  Both my phones have their corresponding Ext Phone Mask (10 digits)
>
> 4.  Created my (1) AAR Group named = HQ-BR1-AARGroup
>
> o   Prefix for this AAR group is "91"
>
> 5.  Assigned the above AAR group at the line and device level of both
> phones
>
> 6.  Built out separate AAR Rout Patterns pointing to new Route List
>
> Troubleshooting:
> I ran my debugs on both gateways and could see the call from CUCM to the
> HQ-RTR I could also see the incoming call from PSTN to BR1-RTR however I
> still received a busy?
>
> Any ideas would be appreciated!
>
>
> - Hugo
>
> -- next part --
> An HTML attachment was scrubbed...
> URL:
> 
>
> --
>
> Message: 2
> Date: Wed, 14 Nov 2012 21:05:45 -0600
> From: Bill 
> To: "Barrera, Hugo" 
> Cc: "ccie_voice@onlinestudylist.com" 
> Subject: Re: [OSL | CCIE_Voice] AAR Not Working
> Message-ID: <99f28133-bc81-4220-a947-35fe18de1...@gmail.com>
> Content-Type: text/plain; charset="utf-8"
>
> So you can see the call go out the pstn at HQ and arrive at SB but you get
> busy?
>
> What is the error or reason for busy?
>
> Normally, I do not put anything but aar pt in aar CSS.  I the assign the
> aar CSS to the device level.  I assign the aar group to the line level.  On
> the target I set the aar number, uncheck the box and put aar as its CSS.
>
> Bill
>
>
> On Nov 14, 2012, at 7:08 PM, "Barrera, Hugo" 
> wrote:
>
> > Hi,
> >
> > I am doing AAR, Lab 6 Volume 1, but I just can?t get it to work
> correctly. The following is my programming task list and what I witnessed:
> >
> > Call flow = HQ Phone 2 x5002 calls BR1 Phone 2 x1002
> >
> > 1.  Enabled AAR globally in service parameters
> > 2.  Created my AAR-PT and AAR-CSS
> > o   The AAR-CSS contains the AAR-PT and Internal-PT
> > 3.  Both my phones have their corresponding Ext Phone Mask (10
> digits)
> > 4.  Created my (1) AAR Group named = HQ-BR1-AARGroup
> > o   Prefix for this AAR group is ?91?
> > 5.  Assigned the above AAR group at the line and device level of
> both phones
> > 6.  Built out separate AAR Rout Patterns pointing to new Route List
> >
> > Troubleshooting:
> > I ran my debugs on both gateways and could see the call from CUCM to the
> HQ-RTR I could also see the incoming call from PSTN to BR1-RTR however I
> still received a busy?
> >
> > Any ideas would be appreciated!
> >
> >
> > - Hugo
> >
> > ___
> > For more information regarding industry leading CCIE Lab training,
> please visit www.ipexpert.com
> >
> > Are you a CCNP or CCIE and looking for a job? Check out
> www.PlatinumPlacement.com
> -- next part --
> An HTML attachment was scrubbed...
> URL: 
>
> --
>
> ___
> CCIE_Voice mailing list
> CCIE_Voice@onlinestudylist.com
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
>
>
> End of CCIE_Voice Digest, Vol 81, Issue 27
> **
>
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CME 7.0.1 Call Park & Call Pickup issue

[Ramcharan Arya]

Hello,

I have am working on CME call pickup excercise. I have testing call park
and pickup, When I press pickup software I am getting  getting fast  tone.


Here is my configuration.


ephone-dn  17 octo-line
number 4731
label 4731
description BR2 Ph1
!
ephone-dn  18 octo-line
number 4732
label 4732
description BR2 Ph2
!
ephone-dn  19  octo-line
number 4733
label 4733
Description BR2 Ph3

!
ephone-template  1
 softkeys idle  Newcall Pickup Redial Dnd
 softkeys connected  Hold Park Trnsfer Endcall Flash

ephone  15
ephone-template 1
device-security-mode none
mac-address 0CD9.9690.6FC2
type 7962
button  1:17
!
ephone  17
ephone-template 1
device-security-mode none
mac-address 0CD9.9690.6CA8
type 7962
button  1:18
!
ephone  18
ephone-template 1
device-security-mode none
mac-address 34BD.C82D.A1D7
type 7962
button  1:19
!
ephone-dn  16
 number 4735
 park-slot timeout 20 limit 2 recall
 description park slot for All Users
!
telephony-service
call-park system application
!


Testing procedure:

1. Call from ext 4731 to ext 4732
2. On ext 4732 answer the phone and put call on park
3. When I press pickup softkey to retrieve call on park is not working
getting busy tone.


Can you please tell me if I am doing something wrong.

Thanks,
Ramcharan Arya
CCIE # 28926(R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] CCIE training + Lab expenses while US Tax returns filling

[Ramcharan Arya]

Hello,

I have a stupid question which I need your thoughts.?

How do we consider these  self paid amount towards CCIE training and
Lab exam fee while filling US tax returns.

Please let me if anyone have done this while filling tax returns in past years.

Regards,
Ramcharan Arya
CCIE # 28926 (R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Unable to call AVT from PSTN 911

[Ramcharan Arya]

Hello,

I am working on a task trying to call AVT extension  4005 from PSTN
911. I am able to call voice mail and auto-attendent but when I call
AVT number I get re-order tone.

Has anyone try AVT setup on CUE. Please let me know.

I got another problem with MWI lamp is not working when use left voice
mail to extension.


telephony-service
no auto-reg-ephone
  max-ephones 52
 max-dn 192
 ip source-address 10.10.128.1 port 2000
 voicemail 4004
 max-conferences 8 gain -6
 moh music-on-hold.au
 multicast moh 239.23.4.10 port 2000
 web admin system name Admin password admin
 dn-webedit
 time-webedit
 transfer-system full-consult
!
ephone-dn  98
 number 4010
 mwi off
!
!
ephone-dn  99
 number 4011
 mwi on

!
dial-peer voice 98 voip
 description MWI OFF
 incoming called-number 4010
 codec g711ulaw
 no vad
!
dial-peer voice 99 voip
 description MWI ON
 incoming called-number 4011
 codec g711ulaw
 no vad
!
dial-peer voice 4004 voip
 destination-pattern 4004
 session protocol sipv2
 session target ipv4:10.10.128.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad
!
dial-peer voice 4005 voip
   ** Description AVT ***
 destination-pattern 4005
 session protocol sipv2
 session target ipv4:10.10.128.2
 dtmf-relay sip-notify
 codec g711ulaw
 no vad

Can you please  suggest is something is missing in my configuration.

Thanks & Regards,
Ramcharan Arya
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] Question of Home lab virtual server setup

[Ramcharan Arya]

Hi Everyone,

Thank you very much for all your suggestions and inputs.

Finally I have decided to build this server with ESXI 5.1. I initially
ran into couple of issues.

1. Got Pink screen error message : execute disable/no execute cpu
feature to be enable
2.  vSphere client was unable to connect The underlying correction was
closed: could not establish trust relatoinship for SSL/TLS secure
channel

Both issues are fixed now. Tomorrow I will continue to setup VMs.

Finally I should be able to start this lab for Vol1 I will use
proctorlabs once I am approaching  otwards my lab dates.

Thanks once again for all your help.

Regards,
Ramcharan Arya
CCIE # 28926 ( Routing & Switching)


On Mon, Oct 22, 2012 at 7:04 PM, Craig Hill (crahill)  wrote:
> The versions on the lab are not officially supported by Cisco in VMWare, but 
> this link will give a good guideline on the requirements if you follow the 
> 8.0 trains. Can you run CUP and UCXN on 80 Gig drives in VMWare? Probably, 
> but I have had very few issues following the guidelines here. Also, if you 
> are like me , you may want to take  multiple snapshots as you work  through 
> the scenarios for quick restoration,  and this will consume space as well.
>
> http://docwiki.cisco.com/wiki/Unified_Communications_Virtualization_Downloads_(including_OVA/OVF_Templates)
>
>
> Following these recommendations, you will be tight on space, and I would 
> again recommend using thin provisioning to help offset some of this.
>
>
> Craig
>
>
>
>
>
> -Original Message-
> From: Bill [mailto:whl...@gmail.com]
> Sent: Monday, October 22, 2012 5:40 PM
> To: Craig Hill (crahill)
> Cc: Ramcharan Arya; ccie_voice@onlinestudylist.com
> Subject: Re: [OSL | CCIE_Voice] Question of Home lab virtual server setup
>
> Most Cisco UCM servers only require a 72 or 80 GB HDD so 400 should cover you 
> 2 UCM (pub & sub) CUCx, CUPS, and UCCX.
>
> Bill
>
>
> On Oct 22, 2012, at 1:22 PM, "Craig Hill (crahill)"  wrote:
>
>> You are a little light on HD space, to run everything. I would go with ESXi 
>> 5 and use thin provisioning. I think you will get better performance if you 
>> use ESXi vs Workstation. Until I got my hands on a UCS server, I built a 
>> home based PC with 2 TB of drive space and 16 gig of RAM, and an adaptec 
>> controller card. This ran 5 VM's pretty well and I had no issues with Audio.
>>
>>
>> Craig
>>
>>
>>
>> -Original Message-
>> From: ccie_voice-boun...@onlinestudylist.com
>> [mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Ramcharan
>> Arya
>> Sent: Sunday, October 21, 2012 10:27 PM
>> To: ccie_voice@onlinestudylist.com
>> Subject: [OSL | CCIE_Voice] Question of Home lab virtual server setup
>>
>> Hello,
>>
>> Apologies for sending this message to the list.
>>
>> I need your advice regarding my home lab.
>>
>> My CUCM was running on a desktop which crashed now I got new HP DL 360
>> G5 server it is 2x QUAD-cpu  XEON 2.00  Gig hz.
>> This server has 16 Gig RAM.
>>
>> Currently server is configured with RAID 5 so disk spare is showing
>> 400 Gig but I want to change to RAID 0 so I can have full 590 Gig disk space.
>>
>> I have two choices:
>>
>> 1. Install Windows 2008 R2 enterprise edition 64 bit OS eval 180 days.
>> Then install
>> VMware  Workstations  7.0 and create 4-5 virtual machines.
>>
>> 2. Install ESXI 5.1 which is free and manage Virtual environment using
>> vSphere client
>>
>> Because I want to take snapshot of these VM for these virtual machine on 
>> regular basis.
>>
>>
>> This is my last attempt to build this server otherwise I will start using 
>> proctorlab rack if it does not work.
>> Please suggest and send your response directly.
>>
>> Has anyone setup Unifiedfx lab edition. In my setup Audio is not
>> working. Please share your advice
>>
>> Thanks & Regards,
>> Ramcharan Arya
>> CCIE # 28926
>> ___
>> For more information regarding industry leading CCIE Lab training,
>> please visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
>> ___
>> For more information regarding industry leading CCIE Lab training,
>> please visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out
>> www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Question of Home lab virtual server setup

[Ramcharan Arya]

Hello,

Apologies for sending this message to the list.

I need your advice regarding my home lab.

My CUCM was running on a desktop which crashed now I got new HP DL 360
G5 server it is 2x QUAD-cpu  XEON 2.00  Gig hz.
This server has 16 Gig RAM.

Currently server is configured with RAID 5 so disk spare is showing
400 Gig but I want to change to RAID 0 so I can have full 590 Gig disk
space.

I have two choices:

1. Install Windows 2008 R2 enterprise edition 64 bit OS eval 180 days.
Then install
VMware  Workstations  7.0 and create 4-5 virtual machines.

2. Install ESXI 5.1 which is free and manage Virtual environment using
vSphere client

Because I want to take snapshot of these VM for these virtual machine
on regular basis.


This is my last attempt to build this server otherwise I will start
using proctorlab rack if it does not work.
Please suggest and send your response directly.

Has anyone setup Unifiedfx lab edition. In my setup Audio is not
working. Please share your advice

Thanks & Regards,
Ramcharan Arya
CCIE # 28926
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] IOS Version in LAB according to blueprint

[Ramcharan Arya]

Hello,

Can someone please confirm what is the exact version in lab according
to Blueprint.I checked blueprint but it does not specify proper
details about IOS version.

On my home lab cisco 2821 router IOS version is
c2800nm-adventerprisek9_ivs-mz.124-20.T6.bin

My CME ver is 7.0.1

Please let me know if this is the correct IOS  version for router.

Thank you,
Ramcharan Arya
CCIE # 28926 (Routing & Switching)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 79, Issue 32

[Ramcharan Arya]

Hello,

Enable Debug and trace on CME and CUE module and send output so I can
take a look at it.

Command on CME :
debug ip http authentication

Command On CUE :

Cue# trace webinterface all

Cue# show trace buffer tail

http://www.cisco.com/en/US/docs/voice_ip_comm/unity_exp/design/CP_CIPExpress/cipce19.html#wp1015605

Thanks,
Ramcharan Arya
CCIE # 28926 ( R&S&


On Fri, Sep 7, 2012 at 1:12 PM,   wrote:
> Send CCIE_Voice mailing list submissions to
> ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
> ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
> ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>1. Re: CUE GUI login (Dane Warner)
>
>
> --
>
> Message: 1
> Date: Fri, 7 Sep 2012 14:11:58 -0400
> From: Dane Warner 
> To: "Dan Quinlan (daquinla)" , Kevin Spicer
> 
> Cc: "Online Study \(ccie_voice@onlinestudylist.com\)"
> 
> Subject: Re: [OSL | CCIE_Voice] CUE GUI login
> Message-ID:
> 
> <839DE40FFC6A1443A1376AC8917475B028BC15058B@EXMBX01.connectwise.hosted>
>
> Content-Type: text/plain; charset="us-ascii"
>
> Still no dice either way. Trying 10.10.110.3 doesn't work at all.
>
> Thanks for the suggestions.
>
> Dane Warner, CCVP
> Sr. Network Engineer
> Epoch Universal, Inc.
> (909)226-0755
> [cid:image001.jpg@01CD8CE9.989B36F0]
>
> Confidentiality Notice: This email and the information contained within it, 
> to include any attachment(s) is for the express use of Epoch Universal, Inc 
> and the person(s) and entities to which it is addressed.  It contains 
> confidential and privileged information.  As such it is intended solely for 
> the person(s) and entities to which it is addressed.  If you are not the 
> intended recipient, you have received this transmittal in error and are 
> obligated to delete this email and all of its attachments immediately.  Any 
> disclosure, re-creation or distribution of this transmittal or its contents 
> is strictly prohibited.  Please notify the sender immediately of your receipt 
> of this transmittal.  Please accept our sincere apologies for any 
> inconvenience.
>
> From: Dan Quinlan (daquinla) [mailto:daqui...@cisco.com]
> Sent: Friday, September 07, 2012 11:03 AM
> To: Kevin Spicer
> Cc: Dane Warner; Online Study (ccie_voice@onlinestudylist.com)
> Subject: Re: [OSL | CCIE_Voice] CUE GUI login
>
> Try putting a / after GUI in ip http path:
>
> ip http path flash:GUI/
> DQ
> d...@cisco.com<mailto:d...@cisco.com>
>
> Sent from my iPhone
>
> On Sep 7, 2012, at 1:54 PM, "Kevin Spicer" 
> mailto:ke...@kevinspicer.co.uk>> wrote:
>
> What happens if you use 10.10.110.3 in the url?
>
> On 7 Sep 2012 18:10, "Dane Warner" 
> mailto:dwar...@epochuniversal.com>> wrote:
> All,
>
> I'm in WB2 Lab 4, have done a factory restore on the CUE module, gone through 
> initial setup successfully.
> When I try to login to the GUI via http://10.10.202.2/Web/index.html, it says 
> 'waiting for 
> 10.10.202.2/Web/Common/HomePage.do<http://10.10.202.2/Web/Common/HomePage.do>'
>  and nothing shows up, blank page. Both IE and Firefox.
>
> ip http server
> ip http authentication local
> no ip http secure-server
> ip http path flash:GUI
>
> telephony-service
> sdspfarm units 1
> sdspfarm transcode sessions 3
> sdspfarm tag 1 br2-xcoder
> conference hardware
> srst mode auto-provision dn
> em logout 0:0 0:0 0:0
>  max-ephones 3
> max-dn 6 no-reg
> ip source-address 10.10.110.3 port 2000
> system message Your current options
> load 7960-7940 P00308000500
> load 7962 SCCP42.8-3-3S
> time-zone 21
> time-format 24
> date-format dd-mm-yy
> voicemail 4600
> max-conferences 8 gain -6
> call-forward pattern 
> web admin system name admin password cisco
> dn-webedit
>  time-webedit
>  transfer-system full-consult
> transfer-pattern 
> create cnf-files version-stamp 7960 Sep 05 2012 21:26:56
>
> should be all I need.
>
> Any ideas?
>
> Thanks,
>
> Dane Warner, CCVP
> Sr. Network Engineer
> Epoch Universal, Inc.
> (909)226-0755
> 
>
> Confidentiality Notice: This email and the information contained within it, 
> to include

[OSL | CCIE_Voice] Pub & Sub VM snapshot issue with cluster

[Ramcharan Arya]

Hello Everyone,

I have take a VM snapshot of my CUCM  PUB & Sub. After completion of
first lab when I restart VM from snaptop cluster is not working
properly.
Can someone please advice me some best practice how to preserve VM
status so I can use  CUCM for next lab practice.

Another query : For Branch 2 router I am using cisco 3725 router with
NM-HDV for T1 PRI with PVDM-16.I have VWIC2-2MFT1/E1 controller it is
not compatible any suggestion how can I make it work.?

Thank you in advance.

Regards,
Ramcharan Arya
CCIE # 28926 ( R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Question about PSTN phone registration?

[Ramcharan Arya]

Hello,

I  have a question about  PSTN WAN router physical connectivity.
According to ipexpert workbook vol 1 configurations PSTN WAN router is
suppose to be connect on Port 2 on HQ-3750 Switch on VLAN 10.

On PSTN WAN Router Fa0/0 IP is 10.10.100.2

On HQ-3750  switch;

interface Vlan10
 ip address 10.10.100.3 255.255.255.0
!
interface FastEthernet1/0/2
 switchport access vlan 10
 switchport mode access
 switchvoice vlan 20
 spanning-tree portfastport


Can someone confirm to me.?

Does any one know the IP address of the PSTN Phone.? I am assuming
there is some DHCP Pool for PSTN Phone which is not  shown in the
configuration.

It would be really nice to have physical connection diagram for voice
v rack similar to R&S
This will help me to setup my rack.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 ( R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 79, Issue 8

[Ramcharan Arya]

Hi,

I checked https://www.ipexpert.com/Cisco/CCIE/Voice/Bootcamps their
website also advertising CCIE Voice version 4.0.

When I click on one of the link its showing version 3.0.

 My guess is version 4.0 is coming soon because ipexpert start
updating their website.


Regards,
Ramcharan Arya
CCIE # 28926 (R&S)




On Mon, Sep 3, 2012 at 7:55 PM,   wrote:
> Send CCIE_Voice mailing list submissions to
> ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
> ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
> ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>1. Re: CCIE Blueprint version change (Dan Quinlan (daquinla))
>2. Voicemail SRST (Justin Barksdale)
>3. UCCX (Bill Lake)
>4. Re: Voicemail SRST (Dan Quinlan (daquinla))
>
>
> --
>
> Message: 1
> Date: Tue, 4 Sep 2012 00:12:54 +
> From: "Dan Quinlan (daquinla)" 
> To: Bikramjit Singh 
> Cc: "ccie_voice@onlinestudylist.com" 
> Subject: Re: [OSL | CCIE_Voice] CCIE Blueprint version change
> Message-ID: <7c6fde39-79f8-48b9-a096-caed1d166...@cisco.com>
> Content-Type: text/plain; charset="us-ascii"
>
> I have no inside info on this, but given that it wasn't announced at Cisco 
> LIVE! this year, I'd expect that the next revision, if it happens in the next 
> 12 months, will be 2900 and 3900 series gateways with PVDM3's, 9.x trains of 
> software, and will include video endpoints of some fashion (8900 or 9900 
> series phones, perhaps the Jabber for Windows Client, maybe even a 
> VCS-registered endpoint such as an EX unit or the Jabber Video client). As 
> for timing, Cisco LIVE! next year seems logical to me.
>
> Again, this is all a guess and not based on any knowledge or fact.
>
> DQ
> d...@cisco.com
>
> Sent from my iPhone
>
> On Sep 3, 2012, at 1:51 PM, "Bikramjit Singh"  wrote:
>
>> Hi Folks,
>>
>> Is there anyone who has a logical prediction on when is the blueprint about 
>> to change?
>> Also, what kind of changes are we expecting; both from software and hardware 
>> (voice gateways, pvdm, etc..) perspective.
>>
>> Thanks!
>> ___
>> For more information regarding industry leading CCIE Lab training, please 
>> visit www.ipexpert.com
>>
>> Are you a CCNP or CCIE and looking for a job? Check out 
>> www.PlatinumPlacement.com
>
>
> --
>
> Message: 2
> Date: Mon, 3 Sep 2012 20:15:49 -0400
> From: Justin Barksdale 
> To: "ccie_voice@onlinestudylist.com" 
> Cc: "ccie_voice@onlinestudylist.com" 
> Subject: [OSL | CCIE_Voice] Voicemail SRST
> Message-ID: 
> Content-Type: text/plain;   charset=us-ascii
>
> Steve,
>
> Voicemail while in SRST can be accomplished using the redirecting number in 
> order to reach the required mailbox.  Alternate extension are not required.
>
> Justin Barksdale
> CCIE #29866
>
>
> Sent from my iPhone 4.
>
> On Sep 3, 2012, at 8:00 PM, ccie_voice-requ...@onlinestudylist.com wrote:
>
>> Voicemail SRST
>
>
> --
>
> Message: 3
> Date: Mon, 3 Sep 2012 19:41:48 -0500
> From: Bill Lake 
> To: CCIE Study 
> Subject: [OSL | CCIE_Voice] UCCX
> Message-ID:
> 
> Content-Type: text/plain; charset="iso-8859-1"
>
> Trying to install UCCX on laptop to practice scripting but while I
> installed Server 2003 and did the registry update, it says
>
> "Installation of Cisco Unified Contact Center Express cannot be performed
> on the current version of MCS OS Service Release.  Please upgrade the OS
> image version to 2003.1.5a or higher and try again"
>
> Does anyone know how to overcome this issue. I tried the following
> [image: Inline image 1]
>
> Bill
> -- next part --
> An HTML attachment was scrubbed...
> URL: 
> -- next part --
> A non-text attachment was scrubbed...
> Name: image.png
> Type: image/png
> Size: 13715 bytes
> Desc: not available
> URL: 
>
> --
>
> Message: 4
> Date: Tue, 4 Sep 2012 00:55:08 +
> From: "Dan Quinlan (daquinla)" 
&

[OSL | CCIE_Voice] cisco 3725 for PSTN WAN

[Ramcharan Arya]

Hi Everybody,

I am building home lab for voice track. I have Cisco 3725 router with
12.4 Advance IP service IOS with PVDM2-32  and 2 VWIC-2MFT1/E1
controllers.

Is this router appropriate for PSTN WAN router.

Additional question for PSTN Phone is Cisco 7942 phone sufficient for
testing. Because I have 2x7960 & 4x7942 phone.

Please let me know your inputs/feedback.

Have a nice long weekend !!

Thanks & Best Regards,
Ramcharan Arya
CCIE # 28926 ( Routing & Switching)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

[OSL | CCIE_Voice] Home Lab Setup Question : Single PoE Switch with multiple VLANs (VRF-Lite/Private VLAN) for HQ, BR1, BR2 and PSTN Phone

[Ramcharan Arya]

Hello,

I am setting up my home lab. I have single 3750 PoE switch. Is it OK
to use one single switch with multiple VLAN or vrf-lite for HQ, BR1,
BR2 and PSTN Phone.

I understand setup will limit me for QoS  implementation.

Please share you input if someone has done similar setup for home lab
using single PoE switch.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 ( R&S)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com

Re: [OSL | CCIE_Voice] CCIE_Voice Digest, Vol 78, Issue 87

[Ramcharan Arya]

Hi Jason,

Congratulations !!!

Thank you very much for sharing valuable information.

Regards,
Ramcharan Arya
CCIE # 28926 ( Routing & Switching)


On Tue, Aug 28, 2012 at 8:24 AM,
 wrote:
> Send CCIE_Voice mailing list submissions to
> ccie_voice@onlinestudylist.com
>
> To subscribe or unsubscribe via the World Wide Web, visit
> http://onlinestudylist.com/mailman/listinfo/ccie_voice
> or, via email, send a message with subject or body 'help' to
> ccie_voice-requ...@onlinestudylist.com
>
> You can reach the person managing the list at
> ccie_voice-ow...@onlinestudylist.com
>
> When replying, please edit your Subject line so it is more specific
> than "Re: Contents of CCIE_Voice digest..."
>
>
> Today's Topics:
>
>1. Re: SLRG is same as LRG??? (Jason Murray)
>2. CCIE Passed! (Jason Murray)
>3. Re: CCIE Passed! (Dan Quinlan (daquinla))
>
>
> --
>
> Message: 1
> Date: Tue, 28 Aug 2012 08:23:08 -0400
> From: "Jason Murray" 
> To: "Krishna" ,"Online Study"
> 
> Subject: Re: [OSL | CCIE_Voice] SLRG is same as LRG???
> Message-ID: <20120828122308.203...@gmx.com>
> Content-Type: text/plain; charset="utf-8"
>
> LRG is only found mentioned in the Device Pool configuration. And the only 
> way you can use that setting is if you use SLRG. So that is how those two 
> correlate to each other.
>
> - Original Message -
> From: Krishna
> Sent: 08/27/12 11:11 PM
> To: Online Study
> Subject: Re: [OSL | CCIE_Voice] SLRG is same as LRG???
>
>  hi folks,
>
> i was wondering slrg and lrg are same in terms of functionality... can both 
> viewed as same ..??? please advise me on this query...
>
> thank you
> krishna.
> -- next part --
> An HTML attachment was scrubbed...
> URL: 
>
> --
>
> Message: 2
> Date: Tue, 28 Aug 2012 09:13:43 -0400
> From: "Jason Murray" 
> To: Online Study 
> Subject: [OSL | CCIE_Voice] CCIE Passed!
> Message-ID: <20120828131344.203...@gmx.com>
> Content-Type: text/plain; charset="utf-8"
>
> Hello everyone just wanted to send a note out that I have passed my CCIE last 
> week #36408!! First and foremost I want to thank God for the ability to 
> retain as much information as I had to take in. Definitely a lot of prayers 
> were answered last week. Next I have to thank my family for sure for putting 
> up with me for the last year (esp these last 4 months of not having my full 
> attention almost daily). They have sacrificed with me. It will be nice not 
> getting up pretty much every morning including Saturdays and turning on my 
> home lab. Will enjoy some peace and quiet of not having the hum of servers 
> and routers running in my office. I wanted to say thanks to Vik and the 
> ipexpert crew. I used their BLS product for about a year now. I had my own 
> equipment so it was easy for me to turn it on almost everyday and run through 
> the walkthroughs and everything until I had it down. Then a month out I went 
> to the One Week Lab Experience which I think put it all together and 
> finalized my 
 st
>  udies. I would like to have said I passed my first time, as I did come very 
> close I didn't but the next 30 days I worked with Vik to help understand 
> where I was needing improvements and the next time I went in I passed. Vik 
> went above and beyond in helping me understand it. He truly loves what he 
> does and enjoys helping people. If he didn't he would have put up with all my 
> emails. I know he's especially glad I passed so he doesn't have to be 
> bothered by me anymore lol :). Also I did use another product some (Cisco 
> 360) which helped to see the grading process using their graded assessments. 
> But as far as actual study material I used ipexpert exclusively.
>
>  So to help those out on this same journey as I was I thought I would put my 
> strategy out there so it may help someone else.
>
>  My strategy was using the device based approach (search google and you will 
> find a nice video on this) where I made a table and read through the entire 
> guide and put each question under the device it corresponded to. Once that 
> was complete I started with SiteC and did that router config along with CUE. 
> Then moved to SB, complete, then check CUE and finish. Then to SA RTR finish 
> that, check CUE if needed. Then finish the 3750 config. On the routers if I 
> happened to be doing QOS or RSVP or something I would configure on the router 
> I was on and then I would hop over to the router it was g

[OSL | CCIE_Voice] Unable to logon into Call Manager after installation

[Ramcharan Arya]

Hello,

I am starting for my CCIE Voice track. As a part of this preperation I
am building home lab for CCIE voice. I have installed Call Manager
7.0.1 on Dell 780 Optiplex dekstop running windows 7 64-bit  8 Gig
RAM,  Running VM workstation 7.0. I have create a VM  and call manager
installed successfully.

When I restart my virtual machine I am unable to logon into CLI using
admin userid and password. I am typing correct userid and password. I
am able to ping Virtual machine IP address but unanle to open http
url.?

Can someone please assist me if you have installed Call manager on virtual.

Thanks & Regards,
Ramcharan Arya
CCIE # 28926 ( Routing & Switching)
___
For more information regarding industry leading CCIE Lab training, please visit 
www.ipexpert.com

Are you a CCNP or CCIE and looking for a job? Check out 
www.PlatinumPlacement.com