Diana,
We already got a new Art Robbins Phoenix crystallization robot recently and
very friendly as time consuming per plate is concerned. Theoretically your
strategy of aspirating one sample enough and dispensing into several 96 well
plate is feasible. However it should depend on the protocol
Dear Colleague,
At the Grenoble Outstation of the EMBL we have been developing a
humidity control device (HC1) used to improve the diffraction quality of
crystals. This device can be easily placed on a home source setup or a
synchrotron beamline. It has been tested with numerous crystals and
Note the appearance of Normal Termination in the middle of the table.
So I think it is this problem:
http://www.ccp4.ac.uk/problems.php#6.0.0-gfortran-unbuffered-22May2006
i.e. the GFORTRAN_UNBUFFERED_ALL one.
Martyn
-Original Message-
From: CCP4 bulletin board on behalf of hari
Maybe it is point 4 (GFORTRAN_UNBUFFERED_ALL) in
http://www.ccp4.ac.uk/problems.php#6.0-ccp4i
Clemens
On Thu, Apr 24, 2008 at 04:40:14PM -0400, hari jayaram wrote:
Hello everyone,
It seems that the reason I get short summaries in scala is because the
Show Summary button is affected by a
Dear Diana,
I have adopted this method, and for the reasons your users suggest, here at
Manchester and do not observe any clogging of the nano probe due to
evaporation. The computer interface does complain that there is no protein
solution aspirated after the initial run but this is not a
For more information please follow link:
http://www.farma.ku.dk/index.php?id=5392
information on research group:
www.farma.ku.dk/br
Professor Michael Gajhede
Biostructural research
Department of Medicinal Chemistry
University of Copenhagen
+45 35336407
Hi:
If anyone needs EDEN (Abraham and Hanna Szöke's density modification
program), the original edencrystallography.org site is gone. As a
quick remedy, I've created (with their permission) a google-code page
here:
http://code.google.com/p/edencrystallography/
The code is GPL-ed, fwiw.
Dear all,
Has anyone succeeded to connect an old StereoGraphics emitter (eg
revision M) with an RS232 outlet to a more modern 3-pin DIN graphics
board such as the Nvidia FX series? If so, could you please send me
the wiring diagram for the cable ?
Thanks in advance, Tassos
Tassos
A postdoctoral position in structural determination of the membrane
protein
One postdoctoral position is available immediately at the Center for
Membrane Biology, Department of Biochemistry and Molecular Biology, The
University of Texas Health Science Center at Houston.
Hi Tassos,
It'll take more than a cable: the signal voltage changes from 12V to 5V
(or vice versa, I forget). I've never seen any info on building a
step-down transformer or aomplifier to address the issue, but for ~$200
USD, it's probably easier just to buy a new emitter.
Cheers,
Warren
Accck!
1. I tried to install Bill Scott's precompiled ccp4 on an intel mac
running OS X 10.5. When attempting launch ccp4i, I receive this
error message:
/sw/share/xtal/ccp4-6.0.2/ccp4i/bin/ccp4i: line 4 /bltwish: no such
file or directory
Typing which bltwish returns
Patrick,
I've not used fink to install ccp4 so can't comment on that, but if you
want a quickie working suite:
I downloaded the pre-compiled binaries from the CCP4 ftp site and they
work fine.
ftp://ftp.ccp4.ac.uk/ccp4/6.0.2/binaries/
Use the Tcl/tk and Blt distributions on the CCP4
You need to run
source /sw/bin/init.sh
if you use bash or zsh
or
source /sw/bin/init.csh
if you use tcsh.
this will automatically set up the environment variables and then it
will do what you want it to (which is to set up the ccp4 environment
according to whichever shell you might be
1. I was sourcing /sw/bin/init.csh, so that wasn't the problem...but:
2. I did find the problem (at least for the precompiled version from
UC Santa Cruz): For some reason sudo ccp4i gave the error message,
but just ccp4i (without the sudo) worked OK. (Although I thought
the first time
14 matches
Mail list logo
