Thanks for the link! I spent a good hour - as is most always the case with Nova
programs. Well told story and lots of vintage computers and telco gear in their
natural environment! We should start a contest to name them all. Many are easy
(for us that is). Here is a more obscure one that picked
I'm on it...
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Glen Slick
Sent: Monday, January 04, 2016 8:38 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Free HP 3000 Equipment for removal (Denver Craigslist)
Someone go get this.
I just resurrected a nice HP 2631G dot matrix line printer:
Like here: http://www.hpmuseum.net/display_item.php?hw=316
It has 3 empty slots for extra character ROMs, so I am itching to install
some... Anyone has ever made a dump of these character ROMs? Apparently these
are the same as the extra
Looks like someone beat me to it. Congrats to whomever it is, I hope it's one
of us!
Marc
- Original Message -
From: "CuriousMarc"
To: "'General Discussion: On-Topic and Off-Topic Posts'"
Sent: Tue 05 Jan 2016 03:34 PM
Subject: RE: Free HP
And I was already salivating for the 600 lines/minute HP2608 that was part of
the HP 3000 system since I have the interface card for it. Looks like it went
to a lucky someone else...
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Jay West
Sent:
I use a BK Precision 879B and can only say good things about it, saved me
numerous times (and also exonerated components I thought were faulty).
http://www.bkprecision.com/products/component-testers/879B-4-count-dual-display-handheld-lcr-meter-with-esr.html
Looks like the Der EE is an even be
You make me feel lucky. I have all 3 (almost, I have the low density HP 9121
rather than an HD 9122 so I can use it on my HP 85)... Haven't restored or even
powered up the recently acquired HP 9895 yet, but the HP 82901A and the HP
9121D now work great. Quite low capacity (270k?) due to the weir
I managed to run Win98 SE (the Second Edition is important!) on a Core Duo
E6700 2.6 GHz with SATA. But it was a very hard job to get it going. The
motherboard still had a legacy PCI slot on it which was helpful. Here is the
procedure I had to go through.
You'll need a Win95 or 98 "DOS" boot disc p
In case you had not seen it already. I finally managed to control my big HP
7970E 9-track tape and my HP 2631G dot matrix from the little HP 85 that could.
Hey, they all talk the same HP-IB after all (well, not really but close
enough). Here is the resulting demo of this odd 1970's trio:
https:/
>> Nice unit! Drool. Looks like this is a NRZI triple density tape, so
>> 7970A or B.
>> Marc
> Note that Christian Corti stated that his drive is capable of 9-track
operation. That's an E.
> (Apparently that will also write 9-track PE at 1600bpi, but it will write
9-track NRZI at 800bpi).
> R
> So, apparently my NRZI 9 track drive has the density option included, and
I don't know if there were any other 200/556 bpi 9 track drives out there.
> When we got the drive I had hoped it would be a 7 track drive, but it
isn't.
Now I finally get it. NRZI, 200, 556 and 800 densities, but in 9 tra
Awesome!
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Ian S. King
Sent: Thursday, March 10, 2016 6:08 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: OT: where I've landed
Hi all,
I informed the list when I left the Living Comp
Dave,
The best manual I have has 54 pages of visual diagrams for adjusting the
Selectric II, which should be mechanically similar to yours, save the added
actuators. With about 7 adjustments depicted per page. Really. That's no
trivial piece of mechanical machinery, it's up there with some of the m
-boun...@classiccmp.org] On Behalf Of Dave Wade
Sent: Friday, June 10, 2016 4:19 AM
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: IO Selectric
Thanks Marc Sounds Great. Dave
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Beh
http://www.cs.bris.ac.uk/Teaching/learning/junk.conferences.html
(specifically, The Society of Digital Information and Wireless Communications
(SDIWC) is in the list of a fake or bogus scientific publications)
http://bogus-conferences.blogspot.com/2012/11/junk-fake-and-bogus-conferences-by.html
Can anyone identify this HP board (see link to pictures)?
https://goo.gl/photos/BBuAV1oozWNSqeUTA
It was at under the main board of a newly acquired HP 1000-E, next to the
firmware board. It says HP 54427-60050 Booster Microcode. It has 5 bitslice
SN 74S181 chips at the back. So I surmise maybe i
: On-Topic and Off-Topic Posts'
Subject: RE: Mystery HP 1000 board
I have one of those boards. You sent me an email about it and I replied a
week ago :)
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of CuriousMarc
Sent: Wednesday, June 15, 2016 9:49 P
ose boards. You sent me an email about it and I
> replied a week ago :)
>
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of
> CuriousMarc
> Sent: Wednesday, June 15, 2016 9:49 PM
> To: cctalk@classiccmp.org
> Subject: Mystery H
gnal Analyzer.
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of CuriousMarc
Sent: Thursday, June 16, 2016 1:16 AM
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: Mystery HP 1000 board
You beat me! You got one hit. How did you search for tha
Marc
-Original Message-----
From: CuriousMarc [mailto:curiousma...@gmail.com]
Sent: Wednesday, June 15, 2016 11:07 PM
To: 'General Discussion: On-Topic and Off-Topic Posts'
Cc: 'Marc Verdiell'
Subject: RE: Mystery HP 1000 board
Ah, thanks, this is getting awfully close,
ht go back.
http://www.computerhistory.org/collections/catalog/102692715
A later revision of the 5451A system I had found below with the nice lady
picture.
Marc
-Original Message-
From: CuriousMarc [mailto:curiousma...@gmail.com]
Sent: Wednesday, June 15, 2016 11:54 PM
To: 'General Disc
Add me to the list of interested people for sure.
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Jay West
Sent: Monday, June 20, 2016 10:41 AM
To: 'General Discussion: On-Topic and Off-Topic Posts'
Subject: RE: HP Series-80 computers - PRM-85 board
make short videos trying to convey the inside story of the
restoration, on my YouTube channel:
https://www.youtube.com/curiousmarc
It's interspersed with all the other restorations, but two videos so far:
https://youtu.be/YupOC_6bfMI
https://youtu.be/xPyqQXFC2yw
Ed Thelen likes to collect
Questions for our HP specialists. I can't open the case of the HP 264x
terminals I just got. I see from the manual there is a small slot on the
side in which you have to insert a "key". Is the key just a small blade tool
or does it have to be more special shape than that?
Marc
Unfortunately, I have the older ROM, the HP 98217A. Says 9885 Flexible Disk
Drive on it (duh). Only this 9885, single side low density 8" drive,
connected with the parallel interface and a special cable is supported. And
indeed as Tony says, to start from a blank disk, you need a tape cartridge
tha
Thanks, I didn't know, I grabbed the image. That offers a path if I can ever
get an 9885 and single sides 8" discs...
Marc
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Paul
> Berger
> On the hpmuseum.net page for the 98217A ROM here is an image of
Next Episode:
https://youtu.be/EDw8U1a6s78
http://www.righto.com/2016/07/restoring-y-combinators-xerox-alto-day_31.html
Marc
From: Curious Marc [mailto:curiousma...@gmail.com]
Sent: Tuesday, July 12, 2016 2:01 AM
To: Curious Marc; cctalk@classiccmp.org
Subject: Re: Y Combinator is restoring
> > On Sep 5, 2016, at 9:30 AM, Josh Dersch wrote:
> >
> > At the LCM, I used an Apple II to test out the Alto's memory -- the
> > Alto II XM uses 4116 RAM chips. I swapped in a row at a time and wrote
a
> > little BASIC program to test for obvious errors. This was
> > time-consuming, but eli
>> On Sep 9, 2016, at 00:59, curiousma...@gmail.com wrote:
>>
>> I might be interested, as I already have two FFT systems that I am
restoring
>(an HP 5420A and a HP 5451C). I am local. Just drop me an email.
>
>If Marc adopts it, he'll surely make some excellent Youtube videos about
it!
>Mark J. B
, at 6:12 PM, CuriousMarc <mailto:curiousma...@gmail.com>
wrote:
Next Episode:
https://youtu.be/EDw8U1a6s78
http://www.righto.com/2016/07/restoring-y-combinators-xerox-alto-day_31.html
Marc
From: Curious Marc [mailto:curiousma...@gmail.com]
Sent: Tuesday, July 12, 2016 2:01 AM
To: Curiou
I dumped the ROMs of the HP 12825 and 12826 (Programmable Serial Interface
boards, a customer programmable version of the 12825A) and gave it to Al.
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Al Kossow
Sent: Thursday, October 27, 2016 11:27 AM
Here is the exact reference for the clean room wipes:
Berkshire DURX 670
Item #: DR670.0404.10
4"x4" (10cm x10 cm)
Non-woven Polyester/Cellulose
And isopropyl alcohol we use is 99.9%, not just 99 as I said.
Marc
-Original Message-
We use 6"x6" clean room rated wipes (I think they were
Incredibly clean unit. Museum quality ;-)
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Al Kossow
Sent: Friday, January 06, 2017 11:54 AM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Morrow MD-3P Portable MicroDecision
www.ebay.
Can you ID the following equipment? Melissa, a digital artist who has to
reconstruct the set of the movie Aliens (a 1986 James Cameron sequel to the
seminal 1979 Alien from Scott Ridley, has asked me to identify the large
computer props that were used in the original set. She identified an Alto
I'd look at hotels on El Camino in Mountain View or Palo Alto, maybe near San
Antonio road. There are a whole bunch of smaller hotels along there. Warning:
this is California, Silicon Valley and more specifically Google land, so hotels
tend to be full and rather expensive for what they are, as y
Wow, nice find. I have bought from thus guy before, but this time it's not me...
Marc
Sent from my iPad
> On May 12, 2017, at 12:33 PM, Al Kossow via cctalk
> wrote:
>
>
> Did someone on the list outbid me on these?
>
> http://www.ebay.com/itm/262963986628
>
I got quite a few interesting 1970's area chips in a recent component haul
in Palo Alto, CA (which had originally been advertised here). A whole TTL
series complement of course, but some old DTL stuff too and some early Intel
bipolar memories and Intel 8080 support chips. However there is a chip th
I thought I did, but what I have is the HP 12845B Line Printer interface
card, for which I could find the documentation. Unfortunately, looking at
the schematics, it does not seem to be based on a 12566B interface. Reading
some more, it is meant for the 2607/261x series of printers, which
apparentl
$9.99 a piece? Mind boggling.
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Chuck Guzis
via cctalk
Sent: Tuesday, July 11, 2017 8:15 AM
To: cctalk
Subject: Re: Cipher F880 with S100 interface card on local CL
On 07/10/2017 10:36 PM, Ethan Dicks
AM
To: CuriousMarc
Cc: Classic Computing List
Subject: Re: HP 12653A line printer interface
Marc,
On Monday, July 10, 2017 at 22:24, CuriousMarc wrote:
> I thought I did, but what I have is the HP 12845B Line Printer
> interface card, for which I could find the documentation.
Than
The overall Chordset dimensions are 5 3/4 for width and 6" for depth. Keys are
spaced like regular piano keys, whatever that is. That should help you
dimension the drawing you have. We found very few programs that would use it.
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@
Steve,
Here you go, 13 pictures of the Chordset. That's about as orthoscopic as I
could get them.
https://www.dropbox.com/sh/owjnyvozp0t8wsg/AABlwP-q-S1pOM4a9_RVAsXVa?dl=0
Note that even the piano keys are not flat pieces, they are wedges that thicken
towards the back. Way more engineering and i
All my capstans are feel rather hard (I think because the rubber is pretty
thin), and do not feel sticky either. The finish is matte. But they are not
powdery at all, they would not leave any residue rubbing your finger on them,
so something looks odd with yours. When the tape is threaded but th
What Chuck says. +1 on ImageDisk.
I also tried OmniDisk which allows you to do just about anything with the
formats, including a lot of wrong things. I found it much more difficult to
use, but it taught me quite a few things.
I made 3 videos on YouTube about it, mostly to remember what I did, th
I see you have the same problem as I did encounter: a rusting shaft that binds
the keys together... I agree, they really spent big $ for production level
tooling (and industrial design and engineering) to make the chordset, it is
quite impressive.
Marc
On Sep 16, 2017, at 1:58 PM, Al Kossow v
And indeed, the H2007 key from eBay works perfectly! Thanks a lot for the link.
I also have two kinds of 21 MX's, one with the double sided on/off H2007 key,
and one with a regular HP 1000 key and front panel arrangement. That key opens
the front panel. However, the second 21MX actually says "
Registered!
Marc
On Oct 3, 2017, at 1:30 PM, Al Kossow via cctalk wrote:
fyi, just noticed this is up now
http://www.computerhistory.org/events/upcoming/#yesterdays-computer-tomorrow-xerox-alto
Beautiful tape unit. Threading the tape over the myriad of pulleys must be a
joy!
Marc
On Oct 2, 2017, at 10:20 PM, Evan Koblentz via cctalk
wrote:
Here's a phone video from a recent repair workshop at the VCFed museum in New
Jersey. Bill Dromgoole is demonstrating progress on one of the ta
Talking to the direct interface should be much easier interface-wise. The
added difficulty is that you are now responsible for formatting. The
interface is well documented (look for
5952-5441_HP_7970E_Interface_Guide_May71.pdf), at least for the E.
Marc
From: Jack Harper [mailto:har...@secureo
Dave,
Thanks, I wasn't aware of this subtlety. But this is for the 7970E only,
right? Can you boot a 21MX from a 7970B tape with the standard boot ROM? Is
your better boot ROM code available?
Marc
-Original Message-
From: cctech [mailto:cctech-boun...@classiccmp.org] On Behalf Of J. David
Wonderful! What a beast! Nice to see the Model 35 TTY working so well too.
Wumpus runs on my HP 85, but it's not quite the same experience ;-). Curiously
it's one of the kids favorite vintage games.
Marc
On Oct 9, 2017, at 10:00 PM, Evan Koblentz via cctalk
wrote:
Here it is loading/runni
Hi Sellam,
I'm interested in your serial Thinkjet. No rush.
Marc
On Oct 7, 2017, at 12:12 AM, Sellam Ismail via cctalk
wrote:
I have listed several new items for sale on the VCFed forums. They are:
Mentor Graphics 433 Workstation
http://www.vcfed.org/forum/showthread.php?60031-Mentor-
Graphic
Anyone in the list has a copy of PowerPrint 2.5.2 from GDT Software? It's a
collection of printer drivers for the Mac for non-Apple printers that works
under System 6.0.7. I am particularly looking at a driver for an HP 2225D
(the serial version of the ThinkJet). It is said that GDT had a one.
Mar
And I found the Columbia.plt HPGL I believe I generated using the method below.
Sending directly to Mike.
Marc
-Original Message-
From: CuriousMarc [mailto:curiousma...@gmail.com]
Sent: Sunday, October 29, 2017 6:16 PM
To: 'Mike Stein'; 'General Discussion: On-Topic and
The link below is from the computer museum in Cambridge, UK, which seems to
have a copy of an HP 2640 terminal manual I am looking for. Is anyone from
that museum on the list? Does any of the UK members know them?
http://www.computinghistory.org.uk/det/14373/HP-2640-Series-Character-Set-Ge
neration
and take pictures of the
pages? Would be nice if they could consider lending it to another institution
or a researcher for scanning (CHM, hpmuseum.net, come to mind).
Marc
From: Dave Wade [mailto:dave.g4...@gmail.com]
Sent: Friday, November 03, 2017 10:38 AM
To: CuriousMarc; General
Behalf Of Christian
Corti via cctalk
Sent: Wednesday, November 08, 2017 12:56 AM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: HP 2640 character set generation manual in the UK
On Fri, 3 Nov 2017, CuriousMarc wrote:
> The link below is from the computer museum in Cambridge,
What did you do for the screen mold? Hot wire method to separate CRT from
implosion window? Put the CRT in a hot water bath? Chip at the glue?
Marc
On Nov 15, 2017, at 11:48 AM, Mattis Lind via cctalk
wrote:
I have been working on a HP 2640B terminal. It was mostly about fixing the
"screen m
I use shadow boxes from Michael's to display my boards. They have many kinds
http://www.michaels.com/-black-shadowbox-studio-decor/M10322044.html?dwvar_M10322044_color=Black
Marc
On Nov 16, 2017, at 8:04 AM, Ethan via cctalk wrote:
This message has no content.
I didn't even know there was such a thing as a twist to tighten on the HP7970.
On the 7970A maybe?
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Chuck Guzis
via cctalk
Sent: Sunday, November 19, 2017 7:32 PM
To: CCtalk
Subject: Wanted: HP7970 hu
Dave,
Thanks so much for the wonderful IMD utility. While I have you on the horn, can
I have you look into a small bug in IMD, related to using it to make HP LIF
disks.
I was trying to format an HP LIF disk from IMD (77 tracks, 30 sectors, 5
interleave, 512 MFM encoding, 256 bytes per sector)
Thanks!
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Kyle Owen via
cctalk
Sent: Wednesday, December 12, 2018 8:47 PM
To: General Discussion: On-Topic and Off-Topic Posts
Subject: Re: Documation card readers for sale
On Wed, Dec 12, 2018 at 6:50
All HP fans in general and Tony in particular,
I have the exact same problem. HP98035 real time clock module
(http://hpmuseum.net/display_item.php?hw=168), plugged into a HP9825T
(http://hpmuseum.net/display_item.php?hw=171), accepts commands, reads back
all 8's. Battery is new, is charging and at
ctalk-boun...@classiccmp.org] On Behalf Of Paul Berger
via cctalk
Sent: Thursday, June 06, 2019 1:28 PM
To: CuriousMarc via cctalk
Subject: Re: HP98035 Real Time clock and AC5954N clock chip
Are you able to set the date and time on your clock? I had disconnected
one end of the diode in the charge c
[mailto:ard.p850...@gmail.com]
Sent: Thursday, June 06, 2019 8:25 PM
To: CuriousMarc; General Discussion: On-Topic and Off-Topic Posts
Subject: Re: HP98035 Real Time clock and AC5954N clock chip
On Thu, Jun 6, 2019 at 8:57 PM CuriousMarc via cctalk
wrote:
>
> All HP fans in general and Tony in
>
> I wondered if it's actually a digtal watch chip (2.5V could have been a couple
> of mercury cells in series, LED watches were not uncommon back then).
>
> In which case it would not normally have come in a 0.6" wide DIP. Perhaps
> normally it was a bare chip directly mounted on the watch circ
Charles,
Then you are the one that asked for the permission to use the sound of my "Golf
Ball Madness" Selectric video (shameless plug: https://youtu.be/vOIPN70f_-Id ).
A) go right ahead and B) turns out I have a high end recording studio
installation at home. I can record clean high quality sa
For what it's worth, I'm OK with it too. It correctly shows that this is a
message relayed by a list sent from a person. I can easily choose whether I
want to respond to the list or to the person or both, I had to make that choice
before anyhow. If bounces are fixed that's great.
Marc
> On Mar
Dave,
I am interested. I have an HP 2647 with two restored tape drives, and have been
looking for this exact tape set. I have some "new" Athana tapes. Step 1 would
be to copy them to a new Athana master tape. Then step to could be to make
copies available to the group. Step 3 would be to transfe
Sweet!
Marc
> On Mar 19, 2017, at 2:39 PM, Cory Heisterkamp via cctalk
> wrote:
>
> Hey guys, figured it was time for an update on the LGP-30 resuscitation.
>
> Some further detective work found a leaky 1500uF cap in one of the B+
> supplies which was causing the 'surging' issue on the scope
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Guy
> Dunphy via cctalk
> Incidentally I've identified those boards. The ones with the pull rings:
>
> https://i.ebayimg.com/00/s/MTIwMFgxNjAw/z/ZrUAAOSwI5Fdg5KH/$_57.j
> pg
>
> They are 12/13 bit isolated DtoA, either voltage or
Hi Grant,
I looked at my collection and I have the 67-69 ROMs, which I also identified
as the DS/1000 ROMs (Distributed Systems Network). I also have a
91740-80033/34/35 set which I don't know what it is. Does anyone know?
Anyhow, looking at the ROMs and dates, I suspect these are E/F microcode
on
Thanks. This is one ugly duckling. I know why I didn't keep it! But it seems to
be functional. Stick to the 15C mentioned before if you don't need the
programmer's features.
Marc
-Original Message-
From: Keven Miller(3k) [mailto:kev...@3kranger.com]
Sent: Sunday, December 24, 2017 9:59
I am the temporary caretaker of a Sperry UTS-40 "intelligent" terminal (very
green screen, Z-80 based terminal from the late 70's or early 80's) which I
grabbed on eBait for sending parts to Dominique Carlier over in Belgium. The
CRT, power supply and character generator seem to work (gives a very
Wow! Complete with the matching desk and in perfect cosmetic condition. What a
find. Congratulations!
Marc
On Mar 21, 2018, at 10:55 AM, Kyle Owen via cctalk
wrote:
I ended up going with PakMail and was not disappointed. It arrived safe and
sound yesterday, and though the cost of shipping wa
Alan,
Saw your comment on my YouTube channel about the 029 size and weight. You
can reach me right here too if you want.
Marc
-Original Message-
From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Alan Perry
via cctalk
Sent: Sunday, April 15, 2018 8:16 AM
To: Pete Lancashire;
And by the way, you'll be glad to know that the answer is 230 lbs for an
029.
Marc
-Original Message-
From: CuriousMarc [mailto:curiousma...@gmail.com]
Sent: Sunday, April 15, 2018 11:02 PM
To: 'Alan Perry'; 'General Discussion: On-Topic and Off-Topic Posts';
After battling for days with a Dolch 65 that developed the two-tone
beep-of-death on boot, I finally found that it's just my BIOS ROM that has
gone bad. The BIOS happens to be an Award BIOS, says "Award 1998 PCI/PNP
686" on the chip. It's a square chip with pins on the side.
Photo here:
https://d
And lifting the sticker reveals the BIOS chip is just a W29C020P-12, a
regular 256k x 8 Flash memory, 5V chip. Duh. Mystery solved. Of course way
newer and with many more address lines than my DataIO 29B can read and
program. Time has come to buy a small, modern, cheap, infinitely capable
Chinesium
And as Glen figured out, I am very interested in this too! I didn't even know
such a card existed. If they have the schematics in the manual (likely), I can
recreate the card.
Marc
On Apr 30, 2018, at 7:40 AM, Glen Slick via cctalk
wrote:
I don't see a manual for the HP 12661A DVS (Digital
Thanks! Very interested, will respond to you directly in another email.
Marc
On Sep 3, 2018, at 9:42 AM, Ernie via cctalk wrote:
Hi Mark !
Ran across your 2016 note at (
http://www.classiccmp.org/pipermail/cctalk/2016-July/025530.html ) while
looking for info on the HP9885M Disk Drive. I
> On Sep 18, 2018, at 8:44 PM, Steve Malikoff via cctalk
> wrote:
>
> Haven't watched this video yet but am keen to do so as "ultimate" is a bold
> claim to make.
>
This an outstanding presentation. The bold claim is actually somewhat
justified...
Marc
I have a version of the Racal Redac CAD system for the HP 2647 or 2648 graphic
terminal I believe. Several DC 100 tapes and one or two boards full of custom
ROMs... No documentation. I have not tried to do anything with it yet.
Marc
On Oct 1, 2018, at 4:42 PM, Paul Koning via cctalk
wrote:
I recently acquired a TI Silent 703 on ePay and just fired up. It worked
right away. But I expected it to work at 300 bauds as advertised, and to my
surprise, it clocked at a the head turning speed of 1200 bauds! Did they
hot-rod it later in its product life? It says MODEL 703 at the back, part
no.
ilto:jbdig...@dragonsweb.org]
> Sent: Friday, October 29, 2021 10:01 PM
> To: cctalk@classiccmp.org
> Cc: CuriousMarc
> Subject: Re: Overclocked TI Silent 703 at 1200 bauds?
>
> On Fri, 29 Oct 2021 20:35:50 -0700
> CuriousMarc via cctalk wrote:
>
> > I recently acqui
On my 703 the label says switch 4 unused, and it does nothing when I try it.
Marc
> -Original Message-
> From: cctalk [mailto:cctalk-boun...@classiccmp.org] On Behalf Of Ron Pool
> via cctalk
> Sent: Saturday, October 30, 2021 10:06 AM
> To: 'General Discussion: On-Topic and Off-Topic Post
86 matches
Mail list logo
