I know it's an old editor, but I like it. I moved to Windows 7, the bundled
version of topstyle lite, doesn't like win 7, so I went out and got topstyle
lite 3, runs fine in win 7. The question is, How do I configure CF studio to
call the new version? I looked through the option, but I don't
NorthGoods Merchant Services
103 E. Wisconsin Avenue
Tomahawk, WI 54487-1471
(715) 453-7414
-Original Message-
From: Richard Meredith-Hardy [mailto:[EMAIL PROTECTED]
Sent: Friday, June 06, 2008 3:03 AM
To: CF-Talk
Subject: RE: CF Studio 5
I bit the bullet and moved from CF Studio 5 to CFE
I bit the bullet and moved from CF Studio 5 to CFEclipse.
I found the initial learning curve to get it all set up how I wanted was
rather steep. With three months at it now, I won't be going back, but on
balance I still think CF Studio 5 is hard to beat; really the only reason
I'm using
Sounds like it's time to move to another editor.
-Original Message-
From: Dave Long [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 04, 2008 5:02 PM
To: CF-Talk
Subject: CF Studio 5
I've had to reformat my computer after 5years of faithful service.
After re-installing
Thanks Gerald,
I understand about playing by the rules. It should be legal because I bought
and paid for Macromedia Studio MX and it was they who upgraded HS 5 plus to
CF Studio 5 in the first place. If anyone knows otherwise, please advise.
As often happens when one corporation swallows
>>> Troublemaker... :)
Look Mark, you know as well as I that Charlie is a card carrying member of
the CFeclipse Gestapo and is under direct orders from Herr Drew to recruit
members by any and all means possible. I find your lack of faith disturbing.
But yeah Dave, I have a copy of CFS 5.0 share
try it and don't like it, you can always resume the search for
>CF Studio 5. Won't cost you anything in the interim.
>
>On Wed, Jun 4, 2008 at 3:02 PM, Dave Long <[EMAIL PROTECTED]> wrote:
>site.
Troublemaker... :)
-Original Message-
From: Charlie Griefer [mailto:[EMAIL PROTECTED]
Sent: Wednesday, June 04, 2008 5:17 PM
To: CF-Talk
Subject: Re: CF Studio 5
y'know, somebody's bound to say it... so i'll just throw out a suggestion
that this might be a good ti
y'know, somebody's bound to say it... so i'll just throw out a
suggestion that this might be a good time to check out eclipse and
cfeclipse :)
hey, if you try it and don't like it, you can always resume the search
for CF Studio 5. Won't cost you anything in the interim.
I've had to reformat my computer after 5years of faithful service.
After re-installing Macromedia Studio MX, I realized it only has Homesite
5.0+.
Does anyone know where I can download a copy of ColdFusion Studio 5.0? Of
course, they are very similar but there seem to be some features that are
di
We have a 10-pack license to CF Studio 5, if you'd like to buy it.
Contact me offlist if you're interested.
Respectfully,
Adam Phillip Churvis
Get advanced intensive Master-level training in
C# & ASP.NET 2.0 for ColdFusion Developers at
ProductivityEnhancement.com
-Or
I'm with Charlie here. You are looking at this in the wrong perspective.
You did not LOSE a copy of CFStudio, you GAINED the opportunity to come up
to speed on the best CF editor out there. It's easy to make excuses to
stick with old products that lack the features you need to be a professional
de
On 8/14/07, Alan Rother <[EMAIL PROTECTED]> wrote:
> You can buy Homesite 5.5 by itself from the Adobe store for $99.
>
> https://store1.adobe.com/cfusion/store/index.cfm?store=OLS-US&view=ols_cat&catType=PRODUCTS&nr=0
>
Note that this is just Homesite, not Homesite+. It does not have RDS,
the CF
and a note: If you have Unicode as standard on your projects, do not
use Homesite/CF Studio.
Here is the technote: http://www.adobe.com/go/tn_19059
OÄuz Demirkapı wrote:
> http://www.adobe.com/cfusion/tdrc/index.cfm?product=homesite
>
>
> Dae wrote:
>
>> Can anyone help? We decom'd a
http://www.adobe.com/cfusion/tdrc/index.cfm?product=homesite
Dae wrote:
> Can anyone help? We decom'd a server that had our copy of ColdFusion Studio
> on it and now need it. Being that it's so old, we lost the disk years ago.
>
> Anyone got a copy or know where I can get a copy of Coldfusion S
You can also purchase it from adobe... http://tinyurl.com/27gtma
On 8/14/07, Justin Scott <[EMAIL PROTECTED]> wrote:
> > Can anyone help? We decom'd a server that had our
> > copy of ColdFusion Studio on it and now need it.
>
> You mentioned in another message that they are familiar with it and t
You can buy Homesite 5.5 by itself from the Adobe store for $99.
https://store1.adobe.com/cfusion/store/index.cfm?store=OLS-US&view=ols_cat&catType=PRODUCTS&nr=0
=]
--
Alan Rother
Adobe Certified Advanced ColdFusion MX 7 Developer
Manager, Phoenix Cold Fusion User Group, AZCFUG.org
~~
> Can anyone help? We decom'd a server that had our
> copy of ColdFusion Studio on it and now need it.
You mentioned in another message that they are familiar with it and that
is why they need it. I would recommend tracking down a copy of
Homesite+ instead. It's essentially the same thing excep
I'm new to CF and one of our team members got a new laptop and needs it.
They're familiar with it so that's why I'm trying o get a copy for them.
On 8/14/07, Charlie Griefer <[EMAIL PROTECTED]> wrote:
>
> at the risk of starting the IDE holy flame war... why not just use
> Eclipse and CFEclipse? :
at the risk of starting the IDE holy flame war... why not just use
Eclipse and CFEclipse? :)
On 8/14/07, Dae <[EMAIL PROTECTED]> wrote:
> Can anyone help? We decom'd a server that had our copy of ColdFusion Studio
> on it and now need it. Being that it's so old, we lost the disk years ago.
>
> A
Can anyone help? We decom'd a server that had our copy of ColdFusion Studio
on it and now need it. Being that it's so old, we lost the disk years ago.
Anyone got a copy or know where I can get a copy of Coldfusion Studio?
Thanks!
~~~
r young <[EMAIL PROTECTED]> wrote:
> I've been using CF Studio 5 quite reliably for years on Windows 2000. Had to
> replace my desktop recently and now using Windows XP.
> Now finding that CF Studio is frequently throwing timeout messages when
> saving files via RDS.
>
>
I've been using CF Studio 5 quite reliably for years on Windows 2000. Had to
replace my desktop recently and now using Windows XP.
Now finding that CF Studio is frequently throwing timeout messages when saving
files via RDS.
Anyone else experience this? Got a solution? (that's NOT D
You can get Homesite+ for free and it has all the functionality of CF Studio
5 I believe.
That is if you cannot get a copy of the CD.
Teddy
On 10/9/06, Dick Price <[EMAIL PROTECTED]> wrote:
>
> Rey
>
> Do you know where I can get the CD containing CF Studio 5. My CD became
&
Rey
Do you know where I can get the CD containing CF Studio 5. My CD became corrupt.
Dick
~|
Introducing the Fusion Authority Quarterly Update. 80 pages of hard-hitting,
up-to-date ColdFusion information by your peers
Rey
Do you know where I can get CF Studio 5 CD? Have license but CD has become
corrupt..
Dick
>Rey,
>
>I'm witchu. Why change if you don't have to. I use Homesite 5.5 (or is it
>+). Can't remember. All I know is every time I try to switch to Eclipse it
>lacks sev
next time you might not be so lucky!!
~Dave the disruptor~
From: Rey Bango <[EMAIL PROTECTED]>
Sent: Tuesday, June 06, 2006 10:02 AM
To: CF-Talk
Subject: Re: CF Studio 5 - Why are we still talking about this?
Thanks Massimo. Ben Nadel hooked me
alone.
-Original Message-
From: "Nick Tong - TalkWebSolutions.co.uk" <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Date: Tue, 6 Jun 2006 16:41:28 +0100
Subject: Fwd: CF Studio 5
> -- Forwarded message --
> From: dave <[EMAIL PROTECTED]>
> Date: 05-Jun-2
> Thanks Massimo. Ben Nadel hooked me up the same day I posted but I
> appreciate the link. :o)
I missed Ben's post, I skipped the whole thread after it started going
nowhere :-)
Massimo
~|
Message: http://www.houseoffusion.com/
Thanks Massimo. Ben Nadel hooked me up the same day I posted but I
appreciate the link. :o)
Rey...
[EMAIL PROTECTED] wrote:
>>It went off topic day's ago. All I wanted to know was if anyone had an
>>updated set of files for tag insight and documentation.
>
>
> The files for Homesite+ should wo
> Actually, there is a little trick to convert your snippets, you
> import them into dreamweaver from HomeSite and then you can grab
> those snippets and chuck them straight into CFE.
That's true, I have heard of that. But there was a guy that posted a
utility he wrote to convert them directl
> It went off topic day's ago. All I wanted to know was if anyone had an
> updated set of files for tag insight and documentation.
The files for Homesite+ should work just fine:
http://download.macromedia.com/pub/coldfusion/7/hsextend/hsplus_extensions_for_cfmx7.zip
Back up your configuration fir
It went off topic day's ago. All I wanted to know was if anyone had an
updated set of files for tag insight and documentation. From there, all
hell broke loose. I think some guy named Dave screwed things up! ;o)
Rey...
Andy Matthews wrote:
> For God's sake! Change the subject line. There's no w
For God's sake! Change the subject line. There's no way this could still be
on topic.
~|
Message: http://www.houseoffusion.com/lists.cfm/link=i:4:242564
Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4
Subscription
<[EMAIL PROTECTED]>
Sent: Tuesday, June 06, 2006 4:46 AM
To: CF-Talk
Subject: Re: CF Studio 5
We do use version control, maybe I missed the question (thought you
were asking which FTP clients we use).
Cyberduck is just a good FTP client.
With Ant I can build a script that would do things such
thanks
~Dave the disruptor~
From: Mark Drew <[EMAIL PROTECTED]>
Sent: Tuesday, June 06, 2006 4:40 AM
To: CF-Talk
Subject: Re: CF Studio 5
Dave
Have a look at http://ant.apache.org/manual/
on the right click on Ant Tasks and have a look throu
t: Tuesday, June 06, 2006 4:18 AM
> To: CF-Talk
> Subject: Re: CF Studio 5
>
> As far as I know it doesnt and doesnt need to. Ant already has FTP
> tasks (might be an optional library).
>
> Cyberduck is a good FTP/SFTP client for OS X that is all
>
> MD
>
> On 6 Jun
t; From: Mark Drew <[EMAIL PROTECTED]>
> Sent: Tuesday, June 06, 2006 2:55 AM
> To: CF-Talk
> Subject: Re: CF Studio 5
>
> I use Cyberduck on OS X
>
> MD
>
> On 6 Jun 2006, at 05:42, dave wrote:
>
>> ok so Sean and Ray use transmit I know (on osx, which is
so then you arent using version control? or do u still use your reg ftp client
with it?
~Dave the disruptor~
From: Mark Drew <[EMAIL PROTECTED]>
Sent: Tuesday, June 06, 2006 4:18 AM
To: CF-Talk
Subject: Re: CF Studio 5
As far as I know it does
disruptor~
>
>
> From: Mark Drew <[EMAIL PROTECTED]>
> Sent: Tuesday, June 06, 2006 2:55 AM
> To: CF-Talk
> Subject: Re: CF Studio 5
>
> I use Cyberduck on OS X
>
> MD
>
> On 6 Jun 2006, at 05:42, dave wrote:
>
>&
So how does that work with all these ants and what not?
~Dave the disruptor~
From: Mark Drew <[EMAIL PROTECTED]>
Sent: Tuesday, June 06, 2006 2:55 AM
To: CF-Talk
Subject: Re: CF Studio 5
I use Cyberduck on OS X
MD
On 6 Jun 2006, at 05:42, dave
I use Cyberduck on OS X
MD
On 6 Jun 2006, at 05:42, dave wrote:
> ok so Sean and Ray use transmit I know (on osx, which is what i use
> as well) but what do the good folks on osx use?
>
> ~Dave the disruptor~
~|
Message: http
till have good ole plain text insecure ftp.
>
> I will look into tortoise once I figure out what the hell Wide Open
> West is doing to my internet connection g
>
> Eric
>
> -Original Message-
> From: Denny Valliant [mailto:[EMAIL PROTECTED]
> Sent: Monday,
MAIL PROTECTED]>
> Sent: Monday, June 05, 2006 9:33 PM
> To: CF-Talk
> Subject: RE: CF Studio 5
>
> So do I remember correctly that I've read somewhere that CFE is
> going to
> move to using SVN and trac? Maybe somebody can create an easy guide on
> starting on develop
We have a guide on checking out CFEclipse over at cfeclipse.org:
http://cfeclipse.org/go/documentation/developer-docs/checking-out
One thing to note is that the username is now "guest" and the
password is blank (but you need to tick the "save password" tick-box
otherwise it keeps prompting you
:53, Eric Roberts wrote:
> That's just what they have on the site...Mark...is there a
> different one?
>
> Eric
>
> -Original Message-
> From: dave [mailto:[EMAIL PROTECTED]
> Sent: Monday, 05 June 2006 13:46
> To: CF-Talk
> Subject: RE: CF Studio 5
>
Actually, there is a little trick to convert your snippets, you
import them into dreamweaver from HomeSite and then you can grab
those snippets and chuck them straight into CFE.
Yes, there are problems with FTP in CFEclipse, I am trying to fix them.
Yes, there is a problem with the update sit
Eric Roberts wrote:
> FTP is a protocol set by W3C.
IETF
Jochem
~|
Message: http://www.houseoffusion.com/lists.cfm/link=i:4:242535
Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4
Subscription: http://www.houseoffus
ok so Sean and Ray use transmit I know (on osx, which is what i use as well)
but what do the good folks on osx use?
~Dave the disruptor~
From: "Russ" <[EMAIL PROTECTED]>
Sent: Tuesday, June 06, 2006 12:15 AM
To: CF-Talk
Subject:
ient/shared host).
Russ
> -Original Message-
> From: Denny Valliant [mailto:[EMAIL PROTECTED]
> Sent: Monday, June 05, 2006 11:51 PM
> To: CF-Talk
> Subject: Re: CF Studio 5
>
> On 6/5/06, Eric Roberts <[EMAIL PROTECTED]> wrote:
>
> > FTP is a protocol set
On 6/5/06, Eric Roberts <[EMAIL PROTECTED]> wrote:
> FTP is a protocol set by W3C. Much like any other transfer protocol, you
> can "transmit" it over a secure channel. Is there any difference in the
> html for a page that uses http vs. https? It's all the same transfer
> protocol, with an adde
re ftp.
I will look into tortoise once I figure out what the hell Wide Open West is
doing to my internet connection g
Eric
-Original Message-
From: Denny Valliant [mailto:[EMAIL PROTECTED]
Sent: Monday, 05 June 2006 21:26
To: CF-Talk
Subject: Re: CF Studio 5
On 6/5/06, Eric
On 6/5/06, Rey Bango <[EMAIL PROTECTED]> wrote:
>
> And I wouldn't want you to be unhappy unless you actually wanted to be
> unhappy in which case I would be happy for your unhappiness.
That just tickles me pink. Thanks for the consideration Rey. Your logic
is impeccable!
> Seriously, by then,
;
> a guide would be nice
>
> ~Dave the disruptor~
>
>
> From: "Russ" <[EMAIL PROTECTED]>
> Sent: Monday, June 05, 2006 9:33 PM
> To: CF-Talk
> Subject: RE: CF Studio 5
>
> So do I remember correctly that I've read somewhere that
On 6/5/06, Eric Roberts <[EMAIL PROTECTED]> wrote:
>
> Its still ftp over something. Just because you send ftp over ssl, ssh,
> tls,
> or anything else for that matter, it doesn't make the ftp part of it any
I'd challenge that, if only because I was checking out the FTP bugs in
the eclipse bugzi
Eric
-Original Message-
From: Russ [mailto:[EMAIL PROTECTED]
Sent: Monday, 05 June 2006 20:22
To: CF-Talk
Subject: RE: CF Studio 5
I'm sorry, Eric, but there are many types of ftp. There is the plain old
insecure ftp which will eventually get you in trouble. Then there's ftp
o
a guide would be nice
~Dave the disruptor~
From: "Russ" <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 9:33 PM
To: CF-Talk
Subject: RE: CF Studio 5
So do I remember correctly that I've read somewhere that CFE is going to
move
To: CF-Talk
Subject: Re: CF Studio 5
Hi Denny,
> ...It's good to be happy, and that's what really matters.
Damn straight!
> And you like to let people know when you're not happy,
Damn straight!
> so PLEASE don't start using CFE.
Still don't have a
lol, i didnt get this name for nuthin!
~Dave the disruptor~
From: Rey Bango <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 8:53 PM
To: CF-Talk
Subject: Re: CF Studio 5
> and Denny, its good to know others put their feet in their mouth too!
So do I remember correctly that I've read somewhere that CFE is going to
move to using SVN and trac? Maybe somebody can create an easy guide on
starting on developing CFE. I tried in the past but could not figure out
how to make edits.
Java is not that hard to pick up and I'm sure a decent per
Eric Roberts [mailto:[EMAIL PROTECTED]
> Sent: Monday, June 05, 2006 8:53 PM
> To: CF-Talk
> Subject: RE: CF Studio 5
>
> Many places don't allow a copy for security reasons. Many of us are
> working
> with sensitive data, so having a copy of the DB is out of the
> qu
Yeah...that found it...thanks!
Eric
-Original Message-
From: dave [mailto:[EMAIL PROTECTED]
Sent: Monday, 05 June 2006 18:25
To: CF-Talk
Subject: Re: CF Studio 5
cfeclipse.tigris.org
Thats the link to put into eclipse I do believe
and Denny, its good to know others put their feet in
> and Denny, its good to know others put their feet in their mouth too!
And deep too!
.
~|
Message: http://www.houseoffusion.com/lists.cfm/link=i:4:242510
Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4
Subscri
Hi Denny,
> ...It's good to be happy, and that's what really matters.
Damn straight!
> And you like to let people know when you're not happy,
Damn straight!
> so PLEASE don't start using CFE.
Still don't have a reason to.
> You, a fellow user, being unhappy would make me unhappy.
And I
That's just what they have on the site...Mark...is there a different one?
Eric
-Original Message-
From: dave [mailto:[EMAIL PROTECTED]
Sent: Monday, 05 June 2006 13:46
To: CF-Talk
Subject: RE: CF Studio 5
That hasnt worked for me for awhile, was a diff one
~Dave the disr
job of it.
Hailisa,
Eric
-Original Message-
From: Denny Valliant [mailto:[EMAIL PROTECTED]
Sent: Monday, 05 June 2006 16:30
To: CF-Talk
Subject: Re: CF Studio 5
MMA Eric!
On 6/5/06, Eric Roberts <[EMAIL PROTECTED]> wrote:
>
> Actually...things are quite the opposite with many
I'll give you that one cause it was too easy. ;P
Rey...
dave wrote:
> I just couldnt let that 1 slip by
>
> ~Dave the disruptor~
>
>
> From: Rick Root <[EMAIL PROTECTED]>
> Sent: Monday, June 05, 2006 7:35 PM
> To
On 6/2/06, Steve Brownlee <[EMAIL PROTECTED]> wrote:
>
> >> 3. The right-click on a CFInclude and option "Edit included
> template"...
> Doesn't exist.
This feature has existed in CFE for a while now (1.7 nightly builds IIRC).
That being said its sort of buggy. It only works some of the time(yo
I just couldnt let that 1 slip by
~Dave the disruptor~
From: Rick Root <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 7:35 PM
To: CF-Talk
Subject: Re: CF Studio 5
dave wrote:
> cfstudio is to much to type tho, u know i hate typing
>
dave wrote:
> cfstudio is to much to type tho, u know i hate typing
>
> Oh and btw your name is Rey not Rye (unless ur feeling a lil toasted!!)
It's funny for someone to correct your typing them misspell his own name. :)
Rik
Re: CF Studio 5
Its CFStudio! Get your editors straight! ;)
Rye...
~|
Message: http://www.houseoffusion.com/lists.cfm/link=i:4:242496
Archives: http://www.houseoffusion.com/cf_lists/threads.cfm/4
Subscription
yup that kettle sure is black!
~Dave the disruptor~
From: Rey Bango <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 7:08 PM
To: CF-Talk
Subject: Re: CF Studio 5
> Maybe I am doing things wrong but I sure make a lot more money than most of
&
8 PM
To: CF-Talk
Subject: Re: CF Studio 5
On 6/5/06, Rey Bango wrote:
>
> Hi Denny,
>
> I guess us commercial, non-power CF'ers with the wrong mindset will just
> stick with other tools then. Hey Dave, Snake & Ferg, how does it feel to
> be part of "commercial, non-p
On 6/5/06, Rey Bango <[EMAIL PROTECTED]> wrote:
>
> Hi Denny,
>
> I guess us commercial, non-power CF'ers with the wrong mindset will just
> stick with other tools then. Hey Dave, Snake & Ferg, how does it feel to
> be part of "commercial, non-power CF'ers, designers/coder wannabes with
> the wrong
> Maybe I am doing things wrong but I sure make a lot more money than most of
> the guys doing it "right", so I will call it my "hs" and be happy with it!
Seems that we have a common theme. ;)
Rey...
~|
Message: http://www.hous
Monday, June 05, 2006 6:35 PM
> To: CF-Talk
> Subject: Re: CF Studio 5
>
> But it wasn't the point of the thread, hijacker!
>
> Rey...
>
> dave wrote:
>
>>" Adobe has made it clear that CFE is their supported platform of choice
>>for CF coders. A
;
Sent: Monday, June 05, 2006 6:47 PM
To: CF-Talk
Subject: Re: CF Studio 5
dave wrote:
> I didnt actually go read that yet but how is it on a shared servers?
It typically doesn't run on the server but somewhere on development /
test / QA. Try it, the worst that can happen is that you like
yeah well...
things change
except u and hs!! ;)~
~Dave the disruptor~
From: Rey Bango <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 6:35 PM
To: CF-Talk
Subject: Re: CF Studio 5
But it wasn't the point of the thread, hij
yeah there is, its at http://www.cfeclipse.org/ haha!!
~Dave the disruptor~
From: Rey Bango <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 6:35 PM
To: CF-Talk
Subject: Re: CF Studio 5
Okay, so yeah, does anyone know if I there's an update
dave wrote:
> I didnt actually go read that yet but how is it on a shared servers?
It typically doesn't run on the server but somewhere on development /
test / QA. Try it, the worst that can happen is that you like it :)
Jochem
~~~
quot;right", so I will call it my "hs" and be happy with it!
~Dave the disruptor~
From: Rey Bango <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 6:17 PM
To: CF-Talk
Subject: Re: CF Studio 5
Hi Denny,
I guess us commercial, non-powe
Okay, so yeah, does anyone know if I there's an update for CFMX 7 tags
in HS/CF Studio 5? ;o)
Rey...
dave wrote:
> whatever poser boy, i wasnt preaching osx and ur the one who's panties got
> all ripped up because i "mentioned" that hs doesnt run on any other os. An
, Jacob" <[EMAIL PROTECTED]>
> Sent: Monday, June 05, 2006 4:58 PM
> To: CF-Talk
> Subject: RE: CF Studio 5
>
>
>>I have to say, I would buy HS if they continued releasing it.
>
>
> Adobe has made it clear that CFE is their supported platform of choic
our breath for any new features, nor bug fixes. "
thank u, that was my whole point
~Dave the disruptor~
From: "Munson, Jacob" <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 4:58 PM
To: CF-Talk
Subject: RE: CF Studio 5
> I h
Hi Denny,
I guess us commercial, non-power CF'ers with the wrong mindset will just
stick with other tools then. Hey Dave, Snake & Ferg, how does it feel to
be part of "commercial, non-power CF'ers, designers/coder wannabes with
the wrong mindset" group? I'm feeling pretty damn good.
Rey...
~
ed it.
~Dave the disruptor~
From: "Munson, Jacob" <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 5:01 PM
To: CF-Talk
Subject: RE: CF Studio 5
> 1. A design view, which doesn't mean a drag and drop
> interface wwysiwyg interface
And this comes from captain poser, you should change your name to garter snake.
~Dave the disruptor~
From: "Snake" <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 9:51 AM
To: CF-Talk
Subject: RE: CF Studio 5
Or Pussy OS's like OS
That hasnt worked for me for awhile, was a diff one
~Dave the disruptor~
From: "Eric Roberts" <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 10:46 AM
To: CF-Talk
Subject: RE: CF Studio 5
It should be http://www.cfeclipse.org/update
06 5:39 PM
To: CF-Talk
Subject: Re: CF Studio 5
MMA Eric!
On 6/5/06, Eric Roberts wrote:
>
> Actually...things are quite the opposite with many developers also working
> from home. Most of the time we don't have access to the data locally from
> db's that are either at the
sorry bout my comments to someone-in-perticular.
my meaning was very mistaken and he wont move on.
~Dave the disruptor~
From: "Munson, Jacob" <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 5:49 PM
To: CF-Talk
Subject: RE: CF Studio 5
Hi Denny,
I guess us commercial, non-power CF'ers with the wrong mindset will just
stick with other tools then. Hey Dave, Snake & Ferg, how does it feel to
be part of "commercial, non-power CF'ers, designers/coder wannabes with
the wrong mindset" group? I'm feeling pretty damn good.
Rey...
De
Bango <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 5:36 PM
To: CF-Talk
Subject: Re: CF Studio 5
Nope. It didn't work for me. I installed the most stable version of
Eclipse and had to install CFEclipse manually...and this was last night.
And on a different note, the FTP plugin
i dont like u and u dont like me yet i am prety sure we will both live we
can take this off list not on here
~Dave the disruptor~
From: "Snake" <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 9:51 AM
To: CF-Talk
Subject: RE: CF Stu
I didnt actually go read that yet but how is it on a shared servers?
~Dave the disruptor~
From: "Eric Roberts" <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 10:46 AM
To: CF-Talk
Subject: RE: CF Studio 5
Thanks for posting that...I wa
ching about OSX.
snake
-Original Message-
From: dave [mailto:[EMAIL PROTECTED]
Sent: 04 June 2006 23:59
To: CF-Talk
Subject: RE: CF Studio 5
no one said u didnt, my god
the point was it doesnt run on anything but winblows and other people choose
to use other os's, lets see how much yo
, June 05, 2006 4:46 PM
To: CF-Talk
Subject: Re: CF Studio 5
+1 for the quickdocs, I liked that too.
As for the rest, Ferg, you are probably better off with a tool like
DW or (maybe) HS/CFStud.
Working sets ROCK, the snippets are real powerful, somehow
I think better than HS, but I don't
> That said, I'm gonna give CFE another shot for the remainder of this
> month. Is there any tool that will automate the move of my 97 code
> templates from the HS dat file into the CFE snippets, or is that
> something I'm going to have to either make or do manually?
I'm pretty sure there is a
MMA Eric!
On 6/5/06, Eric Roberts <[EMAIL PROTECTED]> wrote:
>
> Actually...things are quite the opposite with many developers also working
> from home. Most of the time we don't have access to the data locally from
> db's that are either at the company's site or at their host. That is why
> ftp
right and I even do a lot when traveling
~Dave the disruptor~
From: "Eric Roberts" <[EMAIL PROTECTED]>
Sent: Monday, June 05, 2006 4:36 PM
To: CF-Talk
Subject: RE: CF Studio 5
Actually...things are quite the opposite with many develop
like it says on the site. This
> has always worked before.
>
> Eric
>
> -Original Message-
> From: dave [mailto:[EMAIL PROTECTED]
> Sent: Monday, 05 June 2006 00:10
> To: CF-Talk
> Subject: RE: CF Studio 5
>
> I ran into this as well before and as it tur
1 - 100 of 331 matches
Mail list logo
