The default maxrun is 20 seconds. After that expires the script would
terminate.
You need to set maxrun to a higher value on the event registration
statement. Look for maxrun here:
http://www.cisco.com/c/en/us/td/docs/ios/netmgmt/configuration/guide/12_2sx/nm_12_2sx_book/nm_eem_policy_tcl.html
Lukas Tribus
Sent: 22 April 2015 11:00
Are you kidding me? RTFM! It takes 3 to 5 seconds to find the response
to your question in google.
Stop abusing this list because of your laziness.
Gert Doering
Sent: 22 April 2015 21:46
Your mails are painful on so many levels, that it *does*
Hi,
On Thu, Apr 23, 2015 at 02:17:51PM +, Adam Vitkovsky wrote:
Though this kind of temper might discourage other folks to post questions
which is not vital for the list.
If this sort of exchange discourages people from posting stuff to the list
that could instead be answered by two
Hi guys,
Following up on this thread ... is there a particular non-Cisco RAM
manufacturer you've had good experience with (for example, a vendor known to
sell re-branded Cisco RAM?).
You can hit me off-list if preferred.
Thanks,
Adam
-Original Message-
From: cisco-nsp
Kingston all the way. At least for a while I know they were the company having
their memory rebranded. Not sure if this is still the case but have had very
good luck with their memory modules in Cisco devices.
On Apr 23, 2015, at 10:48 AM, Adam Greene maill...@webjogger.net wrote:
Hi
On Thu, 2015-04-23 at 14:17 +, Adam Vitkovsky wrote:
... this kind of temper might discourage other folks to post
questions which is not vital for the list.
On Thu, 2015-04-23 at 11:04 -0700, Pete Templin wrote:
There's a difference between an overall temper and a simple pointer
that
Good to know. Thanks, Scott.
Unfortunately, it looks like Kingston does not carry RAM for the ASR1002-X
...
Will keep hunting!
-Original Message-
From: Scott Granados [mailto:sc...@granados-llc.net]
Sent: Thursday, April 23, 2015 10:52 AM
To: Adam Greene
Cc: cisco-nsp@puck.nether.net
On 23/04/2015 15:17, Adam Vitkovsky wrote:
Hold your horses folks, since when do we have this IETF/NANOG temper
around here : ) ?
cisco-nsp is for cisco operators in network service provider environments.
Everyone on the mailing list is ok about occasional basic questions and
people are
Hi Guys,
I am having issue in my lab router Cisco 2821. This router is booting on
rommon mode all the time. I checked flash of this router in another working
router. So flash is working fine in another router. I tried to use another
router working flash on this router i am still having the same
There's a difference between an overall temper and a simple pointer
that someone's just not at the right level.
This particular individual brings a lot of completely unresearched
questions to the list...things where they'd be better served by hiring a
consultant, or in some cases where they'd
Hi Everyone,
Slightly off-topic, but we currently use Solarwinds - It works, is functional,
but some parts of it (Alerting for example), I find a bit cumbersome.
Ive had a look at some alternatives, and came across Opmantekhad a look at
a demo, and first impressions were positive...looks
Hi Richard,
Thanks for your reply helping me. I really appreciated.
I changed configuration register to 0x2102 but nothing changed. i am still
getting below messages and router is continuously booting on rommon mode.
so how i can show you configuration or which commands i should run so i can
Good to know. Thanks, Scott.
Unfortunately, it looks like Kingston does not carry RAM for the ASR1002-X
Have used NHR ram (Now curvature) in ASR1K's, and no issues so far...sorry,
dont know what brand they use.
Cheers.
Regarding what replaces the ME3800
Was looking around the Cisco labyrinth and saw that the big RSP for the
ASR 903 has 144Mb buffers and relatively interesting possibilities
regarding interfaces.
Assuming feature parity this would be a nice upgrade. Not to bad price, but
some wierd limitation on
On 23/Apr/15 09:56, Mattias Gyllenvarg wrote:
Regarding what replaces the ME3800
Was looking around the Cisco labyrinth and saw that the big RSP for the
ASR 903 has 144Mb buffers and relatively interesting possibilities
regarding interfaces.
Assuming feature parity this would be a nice
Mattias Gyllenvarg
Sent: 23 April 2015 08:56
Regarding what replaces the ME3800
Was looking around the Cisco labyrinth and saw that the big RSP for the
ASR 903 has 144Mb buffers and relatively interesting possibilities
regarding interfaces.
Assuming feature parity this would be a nice
On Thu, 23 Apr 2015, Ahsan Rasheed wrote:
Hi Guys,
I am having issue in my lab router Cisco 2821. This router is booting on
rommon mode all the time. I checked flash of this router in another working
router. So flash is working fine in another router. I tried to use another
Was this working
There was an issue a while back that Cisco had with faulty memory from a
particular vendor.
I'm not sure the exact symptoms, but it might be worth reading through this
doc:http://www.cisco.com/c/en/us/support/docs/field-notices/634/fn63405.html
Cheers,Josh
Date: Fri, 24 Apr 2015 06:50:43 +0200
Hi guys,
I recently was testing out migration from 15.1 S to 15.2 S and noticed
that the cisco-avpair ip:vrf-id does not seem to be working anymore
with the same running conf I tried changing to subscriber:vrf-id but that
didn't seem to do the trick either. Both seem to get ignored and they
get
19 matches
Mail list logo