-default
fair-queue
int ser 0/1
service-policy output QOS.
In the same way, I wanted to control the bandwidth in Cisco 3560 switch
using mls qos or SRR shaping/sharing etc. on Ethernet interface.
Please help.
Thanks,
P Ambedkar.
___
cisco-nsp mailing list
Root
bridges, and when failover has to take place, the time to converge is more.
I guess BPDU packets are not exchanged properly.
Any help how to resolve this issue..
Thanks
P Ambedkar
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https
router eigrp 11
network 10.x2.y2.z2
redistribute eigrp 10
I want to same redundancy should happen in OSPF, which i am unable to
establish.
Can anybody help in this regard..
Thanks
Ambedkar
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https
Thanks for the replies... i will test and come back...
Thanks
P Ambedkar
On Tue, Jan 20, 2015 at 3:26 PM, Peter Rathlev pe...@rathlev.dk wrote:
On Tue, 2015-01-20 at 09:06 +0100, Peter Rathlev wrote:
On Tue, 2015-01-20 at 10:09 +0530, Ambedkar wrote:
I want to send the Proxy settings
Hi,
I want to send the Proxy settings includes IP address, port number through
DHCP in cisco routers and switches.
Is it possible to send ?
If yes, How ??
Thanks in advance,
P Ambedkar, Hyderabad.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Hi,
I am using RSTP with hello time=1sec with snooping diabled. There are
three scenarios i have tested, in which convergence time is varying.
The following diagram shows the test setup:
+--+
| A |
+--+
/\
Hi,
I am using cisco pix 515E firewall for my internet. With the firewall i am
not getting some websites like wikipedia, flickr..
I have checked in the debug logs, in that 3 way handshake is not happening
properly. In this, first 2 states are happening but 3rd state is NOT
happening, with this
to the required groups.
On Mon, Oct 29, 2012 at 6:18 AM, Ambedkar p.ambed...@gmail.com wrote:
Hi,
I am facing a problem in multicast..
The scenario is like this, 2 layer-2 switches(2950) and 1 Layer-1
switch(cisco 6509).
These three switches are connected in series, L2-L3-L2. The problem
Hi,
I am facing a problem in multicast..
The scenario is like this, 2 layer-2 switches(2950) and 1 Layer-1
switch(cisco 6509).
These three switches are connected in series, L2-L3-L2. The problem is the
packets are dropping at L3(Cisco 6509) switch using catOS. The multicast
data is flowing in SAME
Hi, i think that module is in ROMMON mode, if yes boot manually .
bye.
On Mon, Jun 18, 2012 at 2:42 PM, Phil Mayers p.may...@imperial.ac.ukwrote:
On 18/06/12 09:03, osama hammoudeh wrote:
I tried to :
1- reboot the core switch
2- change the slot where the module is installed
will come back after complete test.
Thanks to all
Bye, Ambi.
On Tue, Apr 3, 2012 at 7:18 PM, Brandon Ewing nicot...@warningg.com wrote:
On Mon, Apr 02, 2012 at 01:37:38PM +0530, Ambedkar wrote:
Hi,
I am having a Cisco 6509 sup-2 switch which is booting properly. When i
diagnose it says NVRAM
Hi,
I am having a Cisco 6509 sup-2 switch which is booting properly. When i
diagnose it says NVRAM area is corrupted and initializing to default
values. Every time i need to boot manually.
Any solution regarding the NVRAM.
Where can i find the NVRAM on the supervisor board, is there any chance
Hi, i am having cisco 2911 router, in which it is having E1 card. Please
give me some configuration examples on E1.
second thing is, if i want to test back to back connection with E1, what
type of cable is required.
Thanks in Advance,
bye
Ambi
___
Thanks for the information.
Ambi.
Unidirectional optic link. Check out udld for detection/protection
alan
Yes
TX - RX
RX - TX
If you wish to shut the port down in the case of unidirectionality have a
look at BFD.
___
cisco-nsp mailing
.
On Sat, Feb 18, 2012 at 12:29 AM, Alex Moya alex2...@gmail.com wrote:
Shoulds like the ports or modules the fiber plug into
On Feb 16, 2012 2:14 AM, Ambedkar p.ambed...@gmail.com wrote:
Hi,
There is a problem in our network. Two switches are directly connected via
Multimode fibre, the link
Hi,
There is a problem in our network. Two switches are directly connected via
Multimode fibre, the link is working fine. But sometimes the link is down
in switch-A for 7 seconds and becoming UP. The logging messages shows that
link is down and UP in switch-A. There is no err-disable messages
Hi,
I am having two leased lines of 2Mbps and 4Mbps. I want to configure both
as a backup route in case if one fails within 3 seconds.
Please give suggestions.
bye
Ambi
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
configuration for the router
as a client?
- is the router sourcing the request from the address that the
server is expecting?
HTH
Rick
On 11/14/2011 12:14 AM, Ambedkar wrote:
Hi,
I configured the tacacs+ in the cisco 7507. But when i am connecting and
entering the USERNAME and PASSWORD, it says
..
oli
Aaron
On Tue, Nov 15, 2011 at 03:28, Ambedkar p.ambed...@gmail.com wrote:
HIi, thanks for the information.
Actually what happened is, i have configured the router for the TACACS
in
the router and it was running properly.
After that the TACACS server has some different
Hi,
I configured the tacacs+ in the cisco 7507. But when i am connecting and
entering the USERNAME and PASSWORD, it says authentication failed.
Other devices are working with the same configuration.
I intentionally killed the tac_plus application, eventhough it is asking
the USERNAME and PASSWORD.
Hi,
Is there any free Backup tools are available which will regular backup's of
cisco devices say weekly once for scheduled day and time.
Thanks in advance.
Bye.
Ambedkar
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net
Thanks to everyone.
Ambedkar.
On Tue, Sep 13, 2011 at 1:27 PM, cisco group bundaberg44...@gmail.comwrote:
OPUtils is a commercial product. However I dont like it as it uses
tftp and effectively your transferring your data in clear text.
You can easily setup a linux box to do secure
Hi,
i am having cisco 6509 switch with MFSC card.
When i am manually restarting the switch, the boot variable and boot loader
of the MSFC card entries are missing and it is going to
ROMMON mode. We have to give BOOT command everytime.
I have configured the boot variable and bood loader entries in
Hi peter,
The command remote command switch show boot is not working on this
platform.
Thanks,
Ambi
On Fri, Aug 5, 2011 at 2:43 PM, Ambedkar Podeti p.ambed...@gmail.comwrote:
Hi,
i am having cisco 6509 switch with MFSC card.
When i am manually restarting the switch, the boot variable
in which the data is coming on 172.xx.xx.1 and translating to
172.xx.xx.255.
But just i want to translate to 2 to 3 packets only instead of broadcast.
So, Please suggest some solution w.r.t. NATing or if u have any other
solution.
Thanks in advance, bye.
Ambedkar
in the SWITCH/ROUTER.
Thanks, bye.
On Fri, Mar 25, 2011 at 12:49 PM, Peter Rathlev pe...@rathlev.dk wrote:
On Fri, 2011-03-25 at 12:34 +0530, Ambedkar Podeti wrote:
Hi, I want to implement the HOT-STANDBY in my network . For this i dont
want
lose even a single packet, so i have implemented
Multicast takes time when it goes out of GROUP and joining GROUP. i dont
want to lose even a single packet.
On Fri, Mar 25, 2011 at 3:04 PM, Oliver Boehmer (oboehmer)
oboeh...@cisco.com wrote:
Yeah broadcast is still a single packet but i dont want to send the
same
packet to whole VLAN
-up delay due to joining a group is the least concern.
If you need guaranteed delivery, look at protocols like SCTP/Sigtran, along
with diverse paths through the network.
oli
From: Ambedkar Podeti [mailto:p.ambed...@gmail.com]
Sent: 25 March 2011 10:40
To: Oliver Boehmer (oboehmer)
Cc
(Console)
(Console)
2. What are the configuration register values to work in MAIN and STANDBY MODE.
Thanks in advance.
Ambedkar.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at http
Yeah, thats true, it is login not line. But the problem is same
line con 0
password cisco
line authentication CONSOLE.
Shouldn't it be login authentication CONSOLE ?
Hi, i am using TACACS+ for my Network. After configuring the device, if i want
to login through the console, it is not taking
Hi, i am using TACACS+ for my Network. After configuring the device, if i want
to login through the console, it is not taking any password and continuosly
showing Con 0 is available.
These are my commands used:
aaa new-model
aaa authentication login default group tacacs+ line
aaa
Hi, my cisco 6509 rommon mode still continues..
previously i cleaned up the all modules, changed the batteries, now it is
showing:
rommon 1 boot
open: file c7200-fslib-m not found
open(): Open Error = -1
loadprog: error - on file open
cannot load the monitor library bootflash:%c7200-fslib-m
Hi, i cleaned the modules of 6509 and reinstalled, it shows
inband gmac link did not come up: reseting the system
System Bootstrap, Version 7.1(1)
Copyright (c) 1994-2001 by cisco Systems, Inc.
c6k_sup2 processor with 262144 Kbytes of main memory
Autoboot executing command: boot bootflash:
Hi, i am using cisco 6509 switch. This switch is not power ON for last one
year, now after switch ON,It is going to ROMMON mode.
The following is the log:
Currently running ROMMON from S (Gold) region
Boot image: bootflash:cat6000-sup2cvk9.8-3-2.bin
Module 1 port ASIC 0 failed: Pinnacle Packet
Hi, please help me. I am having approximately hundreds of cisco routers
and switches. i want to find out the serial numbers for AMC. can anybody
help me how to find out in a single stretch.
Thanks, bye.
___
cisco-nsp mailing list
hi,
i am using fxs card in cisco 2600 router.the problem is in, sh ver it is
showing voice ports, I have configured for POTS, but dial tone is not coming.
This card previously worked.
please give solutions.
bye.
___
cisco-nsp mailing list
hi,
i am using vsat link of 256kbps, two channels of 100kbps and 156 kbps
each. i am using cisco 3845 router. here i want to restrict the second
channel to 156 kbps.
I have an idea about class-map,policy map and service policy.
i tested with the class-map. have a look at it.
class-map
Hi, i am having 256kbps BW. I want to divide the BW into two channels
consists of 128kbps each. please suggest how to divide.
bye.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
https://puck.nether.net/mailman/listinfo/cisco-nsp
archive at
hi, this is the log...
106_6509_CAT_1
106_6509_CAT_1 sh port
* = Configured MAC Address.
# = 802.1X Authenticated Port Name.
Port Name Status Vlan Duplex Speed
Type
- -- -- -- --- --
--
1/1
hi,
1. In cisco 6500 switch, the vlans are missing whenever it is
restarted manually. please give me solution why it is happening.
2. one of the gig port showing errdisable.
cheers, bye.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
Hi,
1. Is it possible to use the IOS of Cisco-3845(ver 12.4) on
Cisco-3600 that is currently running IOS ver 12.2 ???
2. Is the Cisco IOS specific to the series or can be used
across different models?
Cheers,
Ambi
___
cisco-nsp mailing list
Hi, i want to subscribe to magazine related to NETWORKING. Can anybody
tell me which is better and it should be economical also.
please suggest me.
bye.
___
cisco-nsp mailing list cisco-nsp@puck.nether.net
to rommon where
you have
to manually enter the boot command.
--Pete
On Tue, Nov 11, 2008 at 1:15 AM, ambedkar
[EMAIL PROTECTED] wrote:
Hi, i am using cisco 6509 with two sup engines. sup1 is main and
sup2
is standby. The problem is sup2 is not booting automatically when
Hi, i am using cisco 6509 with two sup engines. sup1 is main and sup2
is standby. The problem is sup2 is not booting automatically when the
system is switched ON. it is going to rommon mode, where we have to
type boot command so that it will boot. after booting, boot variable
is missing. if
Hi,
First create a file in the linux.
cd /tftp/
touch xyz(filename)
chmod 777 xyz
--
in the router:
copy run tftp://ipaddress/xyz
try it.
On Sat, 08 Nov 2008 [EMAIL PROTECTED] wrote :
Send cisco-nsp mailing list submissions to
cisco-nsp@puck.nether.net
To subscribe or
hi, i want to implement layer-2 backup with minimum delay with cisco
2950 switches.
i have seen flexlinks, but this is for cisco 3500 series and above.
please help me in this regard.
Thanks in advance.
bye.
___
cisco-nsp mailing list
Hi,
This is Ambi from india. i am using ISDN connectivity between two
remote places. i am having one ISDN number which is having 2x64kbps
capability. when i am connecting with this ISDN number, i am able to
connect only one B-channel and second B-channel is unable to
establish.
i have
47 matches
Mail list logo