You can always hack it up and recirculate it and waste a couple front
ports if you are really in a pinch :)
On 9/20/2016 11:27 AM, Ryan NSP wrote:
Howdy folks,
I am in the middle of some re-arch/migrations/you name it, and I am trying
to lay out some design ahead of ripping out some legacy g
04:24 p.m.
Para: Tarko Tikan
CC: cisco-nsp@puck.nether.net
Asunto: Re: [c-nsp] MPLS via SVI on Sup720-PFC3b
Hey Tarko,
That might be less insane than vrf-lite'ing everything everywhere. I found some
confusing documentation after doing some reading.
http://www.cisco.com/c/en/us/td/docs/swi
Hey Tarko,
That might be less insane than vrf-lite'ing everything everywhere. I found
some confusing documentation after doing some reading.
http://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst6500/ios/15-1SY/config_guide/sup720/15_1_sy_swcg_720/vpn.html#50545
The note on that particular b
hey,
If you don't want to spend any money on this, loop the related vlan with
external cable to physical port? Not pretty but you can get it done with
zero cost if you have two ports to spare.
--
tarko
___
cisco-nsp mailing list cisco-nsp@puck.neth
Hmm, thanks guys...
I would be OK tearing out and replacing with 2T to get this done if it
works.
That's not as bad as line cards galore. 6500s... so really don't want to
dump too much cash into them as I'm planning to get rid of them in the next
couple years.
Looks like if I do the 2T I also ne
Hi,
On Tue, Sep 20, 2016 at 11:27:08AM -0400, Ryan NSP wrote:
> Specifically I am trying to determine if I can run MPLS on a SVI off of a
> Sup720-PFC3b with WS-X6748-GE-TX (CFC) line cards and a WS-X6516A-GBIC
> blade (where the SVI for my LDP neighbor ultimately goes), or just at port
> level?
Nope. You need a core facing 'ES' based card to do the label imposition with
that Sup.
I believe the SUP2T is able to do this now without requiring core facing ES
cards, but don’t hold me to that.
> On Sep 20, 2016, at 11:27 AM, Ryan NSP wrote:
>
> Howdy folks,
>
> I am in the middle of som
