Reviewing some docs for upgrading my primary production cluster from 8 to
9.1. What constitutes a large cluster wrt to the db replication timeout?
- Use the utils dbreplication setrepltimeout CLI command to increase
the database replication timeout value when upgrading large clusters so
Hey Ed,
Brian Meade responded to a similar question I had. He forwarded off this DOC...
https://supportforums.cisco.com/document/52421/troubleshooting-cucm-database-replication-linux-appliance-model#Replication_Timeout_Design_Estimation
The default is set to 300 seconds which suits clusters
Use the formula on
https://supportforums.cisco.com/document/52421/troubleshooting-cucm-database-replication-linux-appliance-modelunder
Replication
Timeout Design Estimation.
If that formula gives you more than 300 seconds, increase the repltimeout.
Brian
On Tue, Apr 22, 2014 at 11:26 AM, Ed
I enable alternate TFTP and then can't type anything in the fields??? The
selector goes down, but I hit the number keys and nothing types. New phone,
out of the box with 9.3.2 firmware. Any ideas? Of course this is the only
client where I can't just change DHCP myself...
Matthew G. Loraditch
There’s my doh moment of the day…
Thanks Brian!!
Matthew G. Loraditch – CCNP-Voice, CCNA, CCDA
1965 Greenspring Drive
Timonium, MD 21093
voice. 410.252.8830
fax. 410.252.9284
Twitterhttp://twitter.com/heliontech |
Facebookhttp://www.facebook.com/#!/pages/Helion/252157915296 |
Hey Guys/Gals,
I seem to be having a problem with an install of Cisco IP Communicator
(8.6.3.0) not picking up the auxiliary Voice VLAN configuration.
In short we have the option 150 details listed on the voice vlans and not
the data and I keep receiving a TFTP server not found error. But
Nick,
I've never heard of this being possible. In order for that to work, IP
Communicator would need some sort of virtual NIC in order to get an address
in the voice VLAN.
I've always just added option 150 on data VLANs that were going to be using
IP Communicators. Other option would be to
Thanks guys, I should have spelunked the archive a little bit :)
On Tue, Apr 22, 2014 at 12:01 PM, Brian Meade bmead...@vt.edu wrote:
Use the formula on
https://supportforums.cisco.com/document/52421/troubleshooting-cucm-database-replication-linux-appliance-modelunder
Replication
Timeout
Our upgrades have gone pretty well, except for licensing on both systems.
For both systems, we followed instructions as outlined in both documentation
and on the list. But for some reason, we still ran into issues.
On CallManager, I installed v7, restored from backup, and then proceeded to
Good morning all,
I have a VCS Control / Expressway combination setup with the appropriate
traversal zone, and search rules for a client of mine who has a Checkpoint
firewall and IPS function. I have provided them with the firewall port usage
guide for Cisco VCS Control with Expressway.
I
There's definitely potential for a firewall issue. Firewalls with SIP ALGs
built in drop 200 OKs with codecs/SDP lines they don't like all the time.
I'd make sure any SIP inspection/SIP ALG functionality is disabled on the
Checkpoint firewall.
Brian
On Tue, Apr 22, 2014 at 5:40 PM, Dana Tong
Wouldn't setting it to false, cause it to not be required, and thus break
your VPN solution when it isn't invoked?
On Tue, Apr 22, 2014 at 4:16 PM, Erick Wellnitz ewellnitzv...@gmail.comwrote:
After collecting traces and sending them off to TAC, we found that the Fail
Call If Trusted Relay
12 matches
Mail list logo