Yea, I stumbled across the ASA guide mentioning it when I was trying
to find something stating CUCM 8.6 and phone proxy wasn't supported.
On Tue, Jul 5, 2016 at 12:17 PM, Brian Meade wrote:
> I'm not so sure that was supposed to be added in there. Phone proxy never
> supported the security by de
I'm not so sure that was supposed to be added in there. Phone proxy never
supported the security by default features of CUCM which is why it went End
of Support with 8.x along with Phone VPN being launched. It looks like a
doc bug was made to add CUCM 8.0 support into the ASA config guide
recentl
The ASA 9.x documentation has Call Manager 8.0.x listed in it's
configuration guide for phone proxy. Just went through this recently
working on a phone proxy issue.
On Tue, Jul 5, 2016 at 10:58 AM, Brian Meade wrote:
> Technically phone proxy isn't supported on 8.x either. It ended support
> af
This is co-res on call manager. All the docs say it is up to
application to alert on license issues and not PLM.
I wish there was a way to poll PLM directly for license usage,
compliance, etc via SNMP but I haven't found a way yet and tried to
walk the MIBs but nothing pops up that looks right. W
Do you have a standalone PLM or co-res?
On Tue, Jul 5, 2016 at 12:25 PM, Erick Bergquist wrote:
> Has anyone seen any issues with the license related Call Manager
> alerts not being logged to the CiscoSyslog or sent as Syslog messages?
>
> The RTMT alerts are all enabled, and I have a 10.5.2.129
Technically phone proxy isn't supported on 8.x either. It ended support
after 7.x and Phone VPN replaced it in 8.x. If you're just using 7940/60s
and IP Communicator, it should work still though.
Do you have a mixed mode CUCM cluster now or just doing non-secure between
the ASA and CUCM? You ca
Has anyone seen any issues with the license related Call Manager
alerts not being logged to the CiscoSyslog or sent as Syslog messages?
The RTMT alerts are all enabled, and I have a 10.5.2.12901-1 (SU2a)
version system with an active CiscoSystemInOverage alert in RTMT and
the license warning when
Alternatively to building a forecasted schedule, could you see a way in
which a "forced open," and "forced closed" feature would help? I.e.,
Supervisors come in at 8:00am and open the call center, and when they go
home at 5:00pm they close it.
This could be as simple as checking for the logged in
XML would be good. just need a few variables.
date
StartTime
EndTime.
The times would be in the form of = T[9:00:00 AM PST]
Then do a if statement
On Mon, 7/4/16, norm.nichol...@kitchener.ca wrote:
Subject: [cisco-voip] Time of day routing on UCC
Looks like this bug-
https://bst.cloudapps.cisco.com/bugsearch/bug/CSCut10254
On Mon, Jul 4, 2016 at 11:19 AM, Eric Pedersen
wrote:
> There is a defect in CUCM 10.5 where the Conductor won't register if CUCM
> is configured to use HTTPS. I don't remember the details but it's related
> to certifi
This really comes down to attenuation (and a couple of other factors). I would
consider an unbroken distance of 420ft-450ft very safe but you may be able to
get closer to 630'ish feet before needing a repeater / extender (depends on
environmental variables).
My previous employer used a Patton C
We are finally replacing our aging router and replacing it with a new (at least
new for us) 2911. The current location of our old router was where our old
Nortel PBX was located. We are looking at relocating the 2911 into our data
centre which will require us to push the PRI signal (we have
Device Mobility will do it by subnet-
http://www.cisco.com/c/en/us/td/docs/voice_ip_comm/cucm/admin/8_6_1/ccmfeat/fsgd-861-cm/fsdevmob.html
On Sat, Jul 2, 2016 at 10:42 AM, Özgür ÖÇALAN
wrote:
> Hi,
>
>
>
> I have a CUCM cluster with 2 Device Pools (DP). I want that some ip phones
> automaticall
Mike & Wes,
While analog is the past, clearly still relevant enough to understand and by
extension, the underlying electrical behavior and interaction of analog
telephony hardware. I thank both of you for teaching me (and hopefully others
listening on the list) something.
A special thanks to W
I am on the planning process to migrate CUCM 8.5 cluster to 10.5(2) using
PCD simple migration to minimize any change. Since Phone Proxy is not
supported on CUCM 10.x, I am thinking to keep the 8.5 cluster but change
the IP address. My question is this:
1. Do I have to enroll the certificate from
15 matches
Mail list logo
