On 11/24/06, Tomasz Papszun [EMAIL PROTECTED] wrote:
On Fri, 24 Nov 2006 at 13:34:37 -0600, Jon Smith wrote:
On 11/24/06, Jon Smith [EMAIL PROTECTED] wrote:
[...]
So, apparently it's just not tagging the messages? I'm going to man
clamav-milter conf to see if maybe I just forgot to enable
On 11/24/06, Jon Smith [EMAIL PROTECTED] wrote:
On 11/24/06, Tomasz Papszun [EMAIL PROTECTED] wrote:
On Fri, 24 Nov 2006 at 13:34:37 -0600, Jon Smith wrote:
On 11/24/06, Jon Smith [EMAIL PROTECTED] wrote:
[...]
So, apparently it's just not tagging the messages? I'm going to man
On 11/24/06, Jon Smith [EMAIL PROTECTED] wrote:
On 11/24/06, Jon Smith [EMAIL PROTECTED] wrote:
On 11/24/06, Tomasz Papszun [EMAIL PROTECTED] wrote:
On Fri, 24 Nov 2006 at 13:34:37 -0600, Jon Smith wrote:
On 11/24/06, Jon Smith [EMAIL PROTECTED] wrote:
[...]
So, apparently it's
On 11/24/06, Jon Smith [EMAIL PROTECTED] wrote:
On 11/24/06, Jon Smith [EMAIL PROTECTED] wrote:
On 11/24/06, Jon Smith [EMAIL PROTECTED] wrote:
On 11/24/06, Tomasz Papszun [EMAIL PROTECTED] wrote:
On Fri, 24 Nov 2006 at 13:34:37 -0600, Jon Smith wrote:
On 11/24/06, Jon Smith
Michael Grant wrote:
So will this fix my quitting issue too or is my problem elsewhere? It
seems incredible to me that I'm the only one having this problem.
TBH, I don't remember what was your original problem. Because of the
top-posting it was not possible to me to follow the whole thread
Even after I create this directory by hand and make it owned by
clamav, group clamav clamav-milter still quits with this same error.
Stranger still, clamav-milter or something, removes this directory and
then complains it's not there.
I'd be really happy if someone had some ideas here, this is
Look at permissions on the parent directory, and it's parent
Steve
On Thu, 2 Nov 2006 20:41:08 +0100
Michael Grant [EMAIL PROTECTED] wrote:
Even after I create this directory by hand and make it owned by
clamav, group clamav clamav-milter still quits with this same error.
Stranger still,
Here's another clue below. It's freshclam that is removing the
daily.inc dir. And when this dir doesn't exist, freshclam-milter
exits. This seems wrong, shouldn't freshclam perhaps download to a
new temporary directory and then upon successful download then
install? Isn't it better to have a
That's a known issue and will be corrected in RC3.
So will this fix my quitting issue too or is my problem elsewhere? It
seems incredible to me that I'm the only one having this problem.
Please don't top-post.
damn, sorry about that.
___
On Fri, 3 Nov 2006 00:37:40 +0100
Michael Grant [EMAIL PROTECTED] wrote:
That's a known issue and will be corrected in RC3.
So will this fix my quitting issue too or is my problem elsewhere? It
seems incredible to me that I'm the only one having this problem.
TBH, I don't remember what
So will this fix my quitting issue too or is my problem elsewhere? It
seems incredible to me that I'm the only one having this problem.
TBH, I don't remember what was your original problem. Because of the
top-posting it was not possible to me to follow the whole thread carefully.
I am
Clamav-milter is quiting on me. It seems to be that daily.inc doesn't
exist. Can someone please tell me how to create this file?
Here's the log file tail when it exits:
LibClamAV debug:
/var/tmp//clamav-e809928209a72505df61c7e112c04a42/main.db loaded
LibClamAV debug: Initializing md5 list
Michael Grant wrote:
Clamav-milter is quiting on me. It seems to be that daily.inc doesn't
exist. Can someone please tell me how to create this file?
Does this directory exist and if so is it writable by the user your
process runs as?
/var/db/clamav/
dp
Yes, that dir does exist and is owned by clamav, group clamav.
I tried mkdir /var/db/clamav/daily.inc to see if it was expecting a
dir and not a file. Can anyone confirm what clamav-milter is
expecting here? So far, one hour later and it hasn't quit again but
sometimes it goes for several
Михаил Исаев wrote:
ClamAV version - snapshot 20061026 (also testing v0.90RC1.1)
OS - Solaris 5.9 (with updated zlib v1.2.3, gcc v3.4.0)
I have a problem with clamav-milter: it's die when freshclam gots errors.
See also bug 113.
--
Nigel Horne. Arranger, Adjudicator, Band Trainer, Composer,
Hi, Nigel.
See also bug 113.
I can't see this bug: You are not authorized to access bug #113 (i am logged in to Bugzilla before
search). Can you post this bug here?
Best regards,
Michael Isaev
___
On Mon, 30 Oct 2006 09:52:11 +0900
Михаил Исаев [EMAIL PROTECTED] wrote:
ClamAV version - snapshot 20061026 (also testing v0.90RC1.1)
OS - Solaris 5.9 (with updated zlib v1.2.3, gcc v3.4.0)
Do you use the experimental code (--enable-experimental)?
--
oo. Tomasz Kojm [EMAIL
ClamAV version - snapshot 20061026 (also testing v0.90RC1.1)
OS - Solaris 5.9 (with updated zlib v1.2.3, gcc v3.4.0)
I have a problem with clamav-milter: it's die when freshclam gots errors.
freshclam log:
--
Received signal: wake up
Max retries == 3
ClamAV
R. Steven Rainwater wrote:
Thanks! I've filed a bug report and included sample error messages from
my log. It might be a good idea if some of the other people experiencing
this posted samples of their logs on the bug report too.
https://wwws.clamav.net/bugzilla/show_bug.cgi?id=106
I tried
On Fri, 2006-10-27 at 07:51, Nicholas Anderson wrote:
https://wwws.clamav.net/bugzilla/show_bug.cgi?id=106
I tried acessing this post but I was not able ...
:-P
You are not authorized to access bug #106
Hmmm... I get a warning saying the site has a broken security
certificate but once
I have a login, and i logged in with it, and then it says that i dont
have permission to access you bug id .
:-P
Nicholas Anderson
Administrador de Sistemas Unix
LPIC-1 Certified
Rede Fiocruz
R. Steven Rainwater wrote:
On Fri, 2006-10-27 at 07:51, Nicholas Anderson wrote:
On Fri, 27 Oct 2006 12:38:09 -0300
Nicholas Anderson [EMAIL PROTECTED] wrote:
I have a login, and i logged in with it, and then it says that i dont
have permission to access you bug id .
Should work now.
--
oo. Tomasz Kojm [EMAIL PROTECTED]
(\/)\.
R. Steven Rainwater wrote:
reported through a more official channel than this list? Is there a
bugzilla somewhere?
http://bugs.clamav.net
___
http://lurker.clamav.net/list/clamav-users.html
On Thu, 2006-10-26 at 10:24, aCaB wrote:
R. Steven Rainwater wrote:
reported through a more official channel than this list?
Is there a bugzilla somewhere?
http://bugs.clamav.net
Thanks! I've filed a bug report and included sample error messages from
my log. It might be a good idea if
Nicholas Anderson wrote
... then i decided to install another milter
tool, and it solved the problem.
So, what one did you switch to?
Jay West
___
http://lurker.clamav.net/list/clamav-users.html
smf-clamd
http://smfs.sourceforge.net
Nick
Nicholas Anderson
Administrador de Sistemas Unix
LPIC-1 Certified
Rede Fiocruz
Jay West wrote:
Nicholas Anderson wrote
... then i decided to install another milter tool, and it solved the
problem.
So, what one did you switch to?
Jay
FreeBSD 6.1
Clamav-milter 0.88.5
Postfix-2.4-20061006
Has anyone gotten the whitelist to work with 'clamav-milter'? I am
assuming that the file syntax is one entry per line. No matter what I
have tried, clamav-milter insists on checking messages even when the
address is in the 'whitelist' as
On Tue, 2006-10-24 at 05:40, Nigel Horne wrote:
On Mon, 2006-10-23 at 15:42 -0300, Nicholas Anderson wrote:
Oct 22 04:44:28 manguinhos sm-mta[7136]: k9M7iSBm007136: Milter
(clmilter): local socket name /var/run/clamav/milter.sock unsafe
Oct 22 04:44:28 manguinhos sm-mta[7136]:
Hi
I've started seeing the same thing using v0.88.4 on a RedHat 9 box. The
weird thing is that it has been very stable in the past. This just
started happening about a week ago - maybe some new type of virus email
is crashing clamd or something? The biggest problem for me is that once
On Wed, 2006-10-25 at 13:00, Nicholas Anderson wrote:
The biggest problem for me is that once clamav-milter dies,
sendmail stops accepting mail altogether.
Does anyone know of a work around that would allow sendmail
to keep going even though clamav-milter or clamd has died?
I did
On Mon, 2006-10-23 at 15:42 -0300, Nicholas Anderson wrote:
Hi All,
i've just installed ClamAV 0.88.5 together with sendmail/milter in a
slackware server.
It worked fine this weekend but today, as traffic has grown,
clamav-milter started dying without leaving any clear error message.
The
Nigel Horne wrote:
On Mon, 2006-10-23 at 15:42 -0300, Nicholas Anderson wrote:
Hi All,
i've just installed ClamAV 0.88.5 together with sendmail/milter in a
slackware server.
It worked fine this weekend but today, as traffic has grown,
clamav-milter started dying without leaving any
Gerard Seibert wrote:
On Sunday October 22, 2006 at 09:49:38 (PM) Dennis Peterson wrote:
Gerard Seibert wrote:
I would rather not use the '--force-scan' option since I am not
particularly interested in scanning outgoing mail. Perhaps someone has
an idea how to correct this problem.
Because
Henrik Krohns wrote:
On Mon, Oct 23, 2006 at 05:53:30AM -0400, Gerard Seibert wrote:
Anyway, we send out several times a week flyers to our customers. These
mailings range from 750 to 2000 messages per run. To scan 2000 identical
messages is insane, not to mention a total waste of system
- Original Message -
Dennis Peterson Gerard Seibert wrote:
Because you don't scan outgoing mail I have to scan incoming mail from
you. My usual response when I read this kind of thing is to just go
ahead and blacklist you now rather than later. Please practice safe
messaging.
On Monday October 23, 2006 at 11:49:47 (AM) Dennis Peterson wrote:
Gerard Seibert wrote:
On Sunday October 22, 2006 at 09:49:38 (PM) Dennis Peterson wrote:
Gerard Seibert wrote:
I would rather not use the '--force-scan' option since I am not
particularly interested in scanning
Kevin W. Gagel wrote:
- Original Message -
Dennis Peterson Gerard Seibert wrote:
Because you don't scan outgoing mail I have to scan incoming mail from
you. My usual response when I read this kind of thing is to just go
ahead and blacklist you now rather than later. Please practice
Gerard Seibert wrote:
On Monday October 23, 2006 at 11:49:47 (AM) Dennis Peterson wrote:
Gerard Seibert wrote:
On Sunday October 22, 2006 at 09:49:38 (PM) Dennis Peterson wrote:
Gerard Seibert wrote:
I would rather not use the '--force-scan' option since I am not
particularly interested
Hi All,
i've just installed ClamAV 0.88.5 together with sendmail/milter in a
slackware server.
It worked fine this weekend but today, as traffic has grown,
clamav-milter started dying without leaving any clear error message.
The messages it's left in log were:
Oct 22 04:44:28 manguinhos
On Sunday October 22, 2006 at 09:49:38 (PM) Dennis Peterson wrote:
Gerard Seibert wrote:
I would rather not use the '--force-scan' option since I am not
particularly interested in scanning outgoing mail. Perhaps someone has
an idea how to correct this problem.
Because you don't
On Mon, Oct 23, 2006 at 05:53:30AM -0400, Gerard Seibert wrote:
Anyway, we send out several times a week flyers to our customers. These
mailings range from 750 to 2000 messages per run. To scan 2000 identical
messages is insane, not to mention a total waste of system resources.
Other than
On Mon, Oct 23, 2006 at 05:53:30AM -0400, Gerard Seibert wrote:
Anyway, we send out several times a week flyers to our customers. These
mailings range from 750 to 2000 messages per run. To scan 2000 identical
messages is insane, not to mention a total waste of system resources.
Other than
On Monday October 23, 2006 at 07:01:47 (AM) Christopher X. Candreva wrote:
On Mon, Oct 23, 2006 at 05:53:30AM -0400, Gerard Seibert wrote:
Anyway, we send out several times a week flyers to our customers. These
mailings range from 750 to 2000 messages per run. To scan 2000 identical
Clamav-milter keeps exiting on me, here's the entry in the log:
LibClamAV debug:
/var/tmp//clamav-404c95520e84423fd3e77caacd7b08e0/main.db loaded
LibClamAV debug: Initializing md5 list structure
LibClamAV debug:
/var/tmp//clamav-404c95520e84423fd3e77caacd7b08e0/main.hdb loaded
LibClamAV debug:
FreeBSD 6.1
Postfix-2.4-20061006
Clamav-milter 0.88.5
I am trying to get clamav-milter working with Postfix. I finally got it
to work, so to speak, but only after using the '-f' aka '--force-scan)'
flag. Without that flag, clamav-milter will only scan outgoing files,
and then only if I use the
Gerard Seibert wrote:
I would rather not use the '--force-scan' option since I am not
particularly interested in scanning outgoing mail. Perhaps someone has
an idea how to correct this problem.
Because you don't scan outgoing mail I have to scan incoming mail from
you. My usual response
FreeBSD 6.1 STABLE
ClamAV 0.88.5
clamav-milter 0.88.5
Postfix-2.4-20061006
I previously had clamav-milter working on a PC with 'Sendmail' as the
MTA. My new system has 'Postfix' installed. I have no desire to change
this, therefore I would like to know how to get the clamav-milter to
operate
Am Samstag, den 21.10.2006, 08:33 -0400 schrieb Gerard Seibert:
FreeBSD 6.1 STABLE
ClamAV 0.88.5
clamav-milter 0.88.5
Postfix-2.4-20061006
I previously had clamav-milter working on a PC with 'Sendmail' as the
MTA. My new system has 'Postfix' installed. I have no desire to change
this,
On Saturday 21 October 2006 10:24, Christian Rueger wrote:
what your problem?
it so easy
postfix main.cf:
smtpd_milters = unix:/clamav/milter
postfix work in chroot /var/spool/postfix
clamav-milter fake sendmail.mc:
INPUT_MAIL_FILTER(‘clmilter’,‘S=unix:/var/spool/postfix/clamav/milter,
Hi,all
I am taking use of clamav-0.88.4 with Postfix-2.3.3,1 under FreeBSD
6.1Release. Now, I am using before-queue smtpd_milter to take virus
checking.
But the daemon, clamav-milter, often goes down and takes these errors, such
as:
[EMAIL
Does anyone have an answer to the question does clamscan act differently than
clamav-milter/clamd when mail is scanned.
I have taken attachment files from the emails and created custom signatures
using sigtool.
The extracted attachment is identified properly by clamscan but emails
containing
On Thu, 7 Sep 2006, Scott Moseman wrote:
Date: Thu, 7 Sep 2006 22:31:43 -0500
From: Scott Moseman [EMAIL PROTECTED]
Reply-To: ClamAV users ML clamav-users@lists.clamav.net
To: clamav-users@lists.clamav.net
Subject: [Clamav-users] clamav-milter will not create socket file
I have searched
I have searched all over, but I cannot find the solution...
Here's the configuration files:
# cat /etc/mail/sendmail.cf | grep clmilter
O InputMailFilters=clmilter
Xclmilter, S=local:/var/run/clamav/clmilter.sock, T=S:4m;R:4m
# cat /etc/sysconfig/clamav-milter | grep clmilter
-o
On Wed, 30 Aug 2006, Dan MacNeil wrote:
Jim Holland writes:
You will need to check to see whether your version of Postfix is fully
supported - I understand that there has been a recent code update to
Postfix which might have introduced some incompatibilities with
MailScanner. These will
Jim Holland writes:
You will need to check to see whether your version of Postfix is fully
supported - I understand that there has been a recent code update to
Postfix which might have introduced some incompatibilities with
MailScanner. These will be sorted out by MailScanner's developer as
I originally had the 'clamav-milter' working with Sendmail on my system.
I recently switched over to Postfix for numerous reasons.
I have not been able to configure the 'clamav-milter' to work correctly
with Postfix. I have version 2.3.x of Postfix which is suppose to
support Sendmail type
On Mon, 28 Aug 2006, Gerard Seibert wrote:
I originally had the 'clamav-milter' working with Sendmail on my system.
I recently switched over to Postfix for numerous reasons.
I have not been able to configure the 'clamav-milter' to work correctly
with Postfix. I have version 2.3.x of Postfix
At 08:20 AM 8/28/2006, [EMAIL PROTECTED] wrote:
On Mon, 28 Aug 2006, Gerard Seibert wrote:
I originally had the 'clamav-milter' working with
Sendmail on my system.
I recently switched over to Postfix for numerous reasons.
I have not been able to configure the 'clamav-milter'
to work
I am sure this has come up before. The failure according to clamav-milter
is in sendmail.cf, even though I have changed it:
I tried two ways to start it:
[EMAIL PROTECTED] mail]# service clamav-milter start Starting Clamav
Milter Daemon:
clamav-milter: socket-addr
You're using a backslash, so the message about wrong sendmail.cf is
correct.
INPUT_MAIL_FILTER(`clmilter',`S=local:/var/run/clamav/clmilter.sock,F=,T=S:4
m;R:4m')dnl
define(`confINPUT_MAIL_FILTERS', `clmilter')
Sorry I copied it wrong. It was correct in the sendmail.mc/cf
I am sure this has come up before. The failure according to clamav-milter
is in sendmail.cf, even though I have changed it:
I tried two ways to start it:
[EMAIL PROTECTED] mail]# service clamav-milter start Starting Clamav Milter
Daemon:
clamav-milter: socket-addr
Never mind
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Edward Ray
Sent: Saturday, August 12, 2006 9:10 PM
To: clamav-users@lists.clamav.net
Subject: [Clamav-users] Clamav-milter for dummies, cannot start on RHEL 3
box
I am sure this has come up
Edward W. Ray wrote:
Never mind
Please share your solution.
dp
___
http://lurker.clamav.net/list/clamav-users.html
:[EMAIL PROTECTED] On Behalf Of Dennis Peterson
Sent: Saturday, August 12, 2006 9:52 PM
To: ClamAV users ML
Subject: Re: [Clamav-users] Clamav-milter for dummies, cannot start on RHEL3
box, got it
Edward W. Ray wrote:
Never mind
Please share your solution.
dp
Hello,
I run clamav-milter and clamd on SunOS 5.9 (x86) and I found that
sometimes clamav-milter stops. It stops with the following information in
syslog:
Jul 24 21:38:34 plex clamav-milter[10643]: [ID 801593 mail.error]
k6OIcWId003460: /var/tmp//clamav-2b417ba15e3a52d8/msg.oTAAYu: No viruses
Hi,
I have recently installed clamav-milter on CentOS with this guide:
---
# HOWTO install clamav-milter on CentOS BQ to work with sendmail.
# this assumes f-prot and MailScanner are installed also.
# check that MILTER support is build into sendmail:
sendmail -d0 /dev/null | grep MILTER
# If
Arthur Sherman wrote:
Hi,
I have recently installed clamav-milter on CentOS with this guide:
---
[whackage happened]
---
The I disabled AV on my laprtop and sent EICAR string to myself.
And I got it!
Neither maillog nor clamd.log notice anything.
Is something wrong with my setup? How
Hi,
It appears that sendmail did not restarted as it should.
After I stopped it, it was running.
So, I had to issue 'service sendmail stop' several times until 'service
sendmail status' confirmed it was stopped.
Thank you for your help!
Best,
--
Arthur Sherman
+972-52-4878851
CPTeam
Stephen,
I've been running the mail server for a few days now and am not
convinced its a memory leak anymore :) While the free memory does
still drop - it eventually stops at about 20mb free. If it was a
memory leak IMO the server would eventually run out of memory and die.
The server happily
On 4/24/06, Greg McCarthy [EMAIL PROTECTED] wrote:
Stephen,
I've been running the mail server for a few days now and am not
convinced its a memory leak anymore :) While the free memory does
still drop - it eventually stops at about 20mb free. If it was a
memory leak IMO the server would
Stephen,
Thanks for the explanation.I'm using Suse 10.0
Its a bit different coming from a windows background - you can view
all the processes and see where all the memory has gone. I thought I
had a problem when I added up the memory used from the processes and
it only came to a fraction of the
I've setup clamav 0.88.1 with clamav-milter running on Suse 10 (fully
patched using YOU) with sendmail (8.13.4)
I have a problem with memory dissapearing rather fast. The machine 1GB
of memory and within 24 hours after rebooting the machine I have about
100mb free (it starts off with about 800mb
On Wed, Apr 19, 2006 at 12:38:09PM +0200, Greg McCarthy said:
I've setup clamav 0.88.1 with clamav-milter running on Suse 10 (fully
patched using YOU) with sendmail (8.13.4)
I have a problem with memory dissapearing rather fast. The machine 1GB
of memory and within 24 hours after rebooting
Stephen,
Unfortunately that didnt seem to help. The memory is still dropping. :(
Can you run it for a while without --quarantine-dir and see if the leak
persists? I have had other reports that point to that option, but I
have not been able to find anything definitive.
Hello, I'm having problem with Clamav-milter. I have clamav-0.88.
[EMAIL PROTECTED]:~$ /usr/local/sbin/clamav-milter -loD
/var/run/clamav/clmilter.sock --max-children=2
i had trouble in the past with the o option and took it out (replaced with n)
Hello, I'm having problem with Clamav-milter. I have clamav-0.88.
[EMAIL PROTECTED]:~$ /usr/local/sbin/clamav-milter -loD
/var/run/clamav/clmilter.sock --max-children=2
Opening /var/log/milter
LibClamAV debug: loadDatabase: check
/usr/local/share/clamav/daily.cvd for updates
LibClamAV debug:
Hello,
we are observing the following behaviour with our clamd/clamav-milter setup:
there some messages that exceed the StreamMaxLength remaining in the
quarantine directory with filenames like msg.AuxBaE. Clamav-milter
keeps around 17 open filedescriptors for each such file. These file
I have clamav-milter running by itself, without --external clamd.
Avoiding the double socket communication which apparently would occur
when clamav-milter talks to --external clamd, seems good.
When using a single host for everything, is there any reason to prefer
--external clamd? I can't
Of Dennis Peterson
Sent: Friday, January 06, 2006 7:13 PM
To: ClamAV users ML
Subject: RE: [Clamav-users] clamav-milter sendmail: postmaster
notification
[EMAIL PROTECTED] said:
Why? As far as I understood -b option sends a message to the postmaster...
Did I miss anything?
Do you filter mail
Hi, all!
I'm struggling with virus notification on sendmail clamav-milter. I've
started clamav-milter like this:
clamav-milter -Dfb /var/run/clamav/clmilter.sock
So, according to manual the mail should be sent to sender, recipient and
postmaster. When any virus cames I see in clamd.log
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mykhaylo
Khodorev
Hi, all!
I'm struggling with virus notification on sendmail
clamav-milter. I've
started clamav-milter like this:
clamav-milter -Dfb /var/run/clamav/clmilter.sock
You are
[EMAIL PROTECTED] log]# cat maillog | grep k069MXPR007370
Jan 6 11:22:33 kernel sendmail[7370]: k069MXPR007370: from=root, size=352,
class=0, nrcpts=3, msgid=[EMAIL PROTECTED],
[EMAIL PROTECTED]
Jan 6 11:22:33 kernel sendmail[7370]: k069MXPR007370:
to=[EMAIL PROTECTED], delay=00:00:00,
-users] clamav-milter sendmail: postmaster
notification
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Mykhaylo
Khodorev
Hi, all!
I'm struggling with virus notification on sendmail
clamav-milter. I've
started clamav-milter like
[EMAIL PROTECTED] wrote:
Why? As far as I understood -b option sends a message to the postmaster...
Did I miss anything?
Thanks
Mykhaylo
You're right, but with -b option message is also sent to sender.
You should use -P (--postmaster-only) to send the notification only to
postmaster.
--
[EMAIL PROTECTED] said:
Why? As far as I understood -b option sends a message to the postmaster...
Did I miss anything?
Do you filter mail sent to Postmaster? If so how can the postmaster get it
if it doesn't pass the filter?
Regardless, anything you need to know about the message can be
Dennis Peterson said:
Regardless, anything you need to know about the message can
be found in the logs. I've never seen a need to keep a virus
around - even in the postmaster account or quarantine directory.
I have. It's very useful when a new virus variant arrives and is
detected by only
Randal, Phil said:
Dennis Peterson said:
Regardless, anything you need to know about the message can
be found in the logs. I've never seen a need to keep a virus
around - even in the postmaster account or quarantine directory.
I have. It's very useful when a new virus variant arrives and
Dennis Peterson said:
I guess I don't understand the need to submit a detected and
quarantined virus to anti-virus vendors.
It's called being socially responsible.
Just because ClamAV (or Bitdefender or McAfee or whatever) detected it
doesn't mean that everybody else does or have even seen
Dennis Peterson wrote:
Randal, Phil said:
[ ... ]
I have. It's very useful when a new virus variant arrives and is
detected by only one of our three virus scanners (or is blocked by
filetype alone). If it is quarantined I can pull out the quarantined
copy and submit it to
Chuck Swiger wrote:
I require my users to zip or tarball attachments before they send them.
Heh. I quarantine incoming zip attachments. :)
--
Matthew.van.Eerde (at) hbinc.com 805.964.4554 x902
Hispanic Business Inc./HireDiversity.com Software Engineer
On Jan 6, 2006, at 11:46 AM, Chuck Swiger wrote:
Dennis Peterson wrote:
Randal, Phil said:
[ ... ]
I have. It's very useful when a new virus variant arrives and is
detected by only one of our three virus scanners (or is blocked by
filetype alone). If it is quarantined I can pull out the
Chuck Swiger said:
Dennis Peterson wrote:
Randal, Phil said:
[ ... ]
I have. It's very useful when a new virus variant arrives and is
detected by only one of our three virus scanners (or is blocked by
filetype alone). If it is quarantined I can pull out the quarantined
copy and submit it to
Randal, Phil said:
Dennis Peterson said:
I guess I don't understand the need to submit a detected and
quarantined virus to anti-virus vendors.
It's called being socially responsible.
Just because ClamAV (or Bitdefender or McAfee or whatever) detected it
doesn't mean that everybody else
Dennis Peterson wrote:
Chuck Swiger said:
[ ... ]
More specificly, I've found viral messages in the quarantine which were
not recognized by ClamAV when the email went by, although a day or two later
they generally will be.
My virus volumes are so great (thousands daily) I'd have to hire
- Original Message -
From: Joe Polk [EMAIL PROTECTED]
To: ClamAV users ML clamav-users@lists.clamav.net
Sent: Friday, December 09, 2005 8:57 PM
Subject: Re: [Clamav-users] clamav-milter sendmail
snip
so where in the file do i put
INPUT_MAIL_FILTER(`clamav', `S=local:/var/run
Obantec Support said:
Hi
I have installed clamav clamav-milter using yum on FC3.
is it possible to have it use the clamav-milter on a per user or is it
serverwide only?
http://www.clamav.net/doc/0.87.1/html/node19.html seems serverwide.
some users have expressed the choice to have no
- Original Message -
From: Nigel Horne [EMAIL PROTECTED]
To: ClamAV users ML clamav-users@lists.clamav.net
Sent: Friday, December 09, 2005 2:17 PM
Subject: Re: [Clamav-users] clamav-milter sendmail
Obantec Support wrote:
Hi
I have installed clamav clamav-milter using yum on FC3
snip
so where in the file do i put
INPUT_MAIL_FILTER(`clamav', `S=local:/var/run/clamav/clmilter.sock, F=,
T=S:4m;R:4m')dnl
define(`confINPUT_MAIL_FILTERS', `clamav')
Mark
__
You can put it up in the section with the other INPUT statements. Be
sure convert your mc file.
JAV
.rp schrieb:
From: analyzer [EMAIL PROTECTED]
To: clamav-users@lists.clamav.net
Date sent: Sun, 04 Dec 2005 14:27:48 +0100
Send reply to: ClamAV users ML clamav-users@lists.clamav.net
Subject:[Clamav-users] ClamAV
From: Hafiz Abdurehman [EMAIL PROTECTED] December 01, 2005 7:17 AM
Dear friends
my requirement-- virus status to be shown on the header of mail messages.
so I need some help on getting clamav-milter to work on sendmail.. I have
done the following
step 1:- Installed clam rpms
401 - 500 of 1091 matches
Mail list logo