A fine looking example with some nice upgrades. I noticed the new SS mast
step, which appears to have a keel stud/nut aft of the mast. Mine is under
the mast (or so I'm told...), so does this mean that a new stud was tapped
into the keel at this point? Certainly easier to check torque in that
Hi can you please removed me from the emailing list?
Thank you,
MAZEN AZIZ
https://mazenaziz.wixsite.com/mazenaziz
“To most people, the sky is the limit. To those who love aviation, the sky is
home. “Jerry Crawford
"I don't think that architecture is only about shelter, is only about a very
This is a terrific documentation of your project Mike. I hope I never have
to use it! I hate being in that hole and I would have to cut out one of my
Propane lockers to do it. Kids are now old enough to know they don't have
to go down there just because I tell them to anymore
Wade
Oh Boy C 33
Wow. I am glad I asked.
Thanks
Fred
Sent from my iPhone
> On Apr 1, 2021, at 12:26 PM, dwight veinot via CnC-List
> wrote:
>
>
> Cleaning. Flushing your heat exchanger? Mayber
>
>> On Thu, Apr 1, 2021 at 12:01 PM Fred Hazzard via CnC-List
>> wrote:
>> As senior citizen I suffer from
Cleaning. Flushing your heat exchanger? Mayber
On Thu, Apr 1, 2021 at 12:01 PM Fred Hazzard via CnC-List <
cnc-list@cnc-list.com> wrote:
> As senior citizen I suffer from the dreaded malady
> CRS.
> Yesterday while visiting Fury I found a gallon of white vinegar.
> Hopefully, one of you can
Andrew,
Nice work. Your before is exactly what my 36 looks like. This is on my wish
list. Did you stay with the existing panel and fuses? Or converted to a
panel with breakers? Thanks.
John McCrea
Talisman
1979 36
Mystic, CT
From: Adam Hayden via CnC-List
Sent: Wednesday, March
All,
If anyone is in the market, a friend of mine is listing his 1974 35 mk II,
well kept version that has been to Bermuda many times.
https://www.yachtworld.com/boats/1974/c-c-35-mk-ii-3821830/
John McCrea
Talisman
Mystic, CT 06355
Thanks to all of the subscribers that contributed
>From the ad;
40' Sailboat Airex Spinnaker by UK. Condition is "Used". Used once or twice.
2003 or 2004 sail. Bainbridge Airex 700 laminate. 51' luff, 26'8'
mid-girth, 26' 8" foot. One small 3" x 3" patch (pictured) and a 1" tear and
pinhole (pictured, not patched)
From: Bob Mann via
Make sure the hot tub temp gets to 104 degrees.
(good luck!)
From: Della Barba, Joe via CnC-List
Sent: Thursday, April 1, 2021 2:20 PM
To: Stus-List
Cc: Della Barba, Joe
Subject: Stus-List C 40 Inspection Checklist
I am going to Maine on 4/14 to look at Elusive. Does anyone have a list of
I would think so. My new A3 for my 35 mk I has a luff of 45
Bob
> On 04/01/2021 10:27 AM John Conklin via CnC-List
> wrote:
>
>
> David,
> I assume this may work on My C 37 ?
> Thanks
> John Conklin
>
>
> > > On Apr 1, 2021, at 10:11 AM,
Vinegar treatment is an annual thing for my RWC engine and the head.
Joe
Coquina
Thanks to all of the subscribers that contributed to the list to help with the
costs involved. If you want to show your support to the list - use PayPal to
send contribution -- https://www.paypal.me/stumurray
I am going to Maine on 4/14 to look at Elusive. Does anyone have a list of
things specific to that boat I should be looking for?
(Example, on the 35s the metal gas tank does a good job of condensing water to
rot the piece of wood it sits on)
Joe Della Barba
Coquina
Thanks to all of the
Cleans up the Thru Hulls?
On Apr 1, 2021, at 12:27 PM, Paul Wyand via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:
I no lie used to work for a company called CRS, (Cash Register Systems) worst
company acronym! But vinegar has lots of uses on a boat. It can clean up mild
mold, as well as
It was more about switching to the Harken windward sheeting car. The
control lines to position the Lewmar car were in awkward location and often
got accidentally tripped - especially in a breeze- the new car will make
it easier on my main trimmer Nothing wrong with the Lewmar system other
than
I no lie used to work for a company called CRS, (Cash Register Systems)
worst company acronym! But vinegar has lots of uses on a boat. It can clean
up mild mold, as well as general cleaning. It is also helpful in getting
rid of mineral build up in head hoses and marine cooling systems. Put it in
In Canada, we sprinkle it on French fries or make pickles with it.
Also can be used to keep your head running smoothly and with less smell,
especially in saltwater.
Steve Thomas
C MKIII
C MKI
-- Original Message --
From: cnc-list@cnc-list.com
To: cnc-list@cnc-list.com
Cc:
On any professionally run boat you’ll find vinegar and water 50/50 mix is used
for wiping down any interior varnished surfaces. It is the best for getting rid
of fingerprints, etc. and doesn’t wreck the finish as cleaners like 409 will.
Andy
Andrew Burton
26 Beacon Hill
Newport, RI
USA 02840
White vinegar is a solvent for uncured epoxy.
Alan Bergen
35 Mk III Thirsty
Rose City YC
Portland, OR
On Thu, Apr 1, 2021 at 8:01 AM Fred Hazzard via CnC-List <
cnc-list@cnc-list.com> wrote:
> As senior citizen I suffer from the dreaded malady
> CRS.
> Yesterday while visiting Fury I found a
from C Sailboat Owners Group discussion- Mine is also off right now, a
gross and fine tune Harkin sheeting system, but interestingly have still
have the original Mk2 set up with movable pin stops and no traveler
block and tackle. Use the secondary cockpit winch with a single line to
the
Nice work
C used to use wire not intended for boats that turns into black powder
eventually ☹
Joe Della Barba
From: Adam Hayden via CnC-List
Sent: Wednesday, March 31, 2021 10:13 PM
To: Stus-List
Cc: Adam Hayden
Subject: [EXTERNAL] Stus-List Re: Panel rewire
Thanks it was a bit of a
Flush and let sit. Cleans out head line from uric acid build up
-Original Message-
From: Fred Hazzard via CnC-List
Sent: Thursday, April 1, 2021 11:01 AM
To: Stus-List
Cc: Fred Hazzard
Subject: Stus-List White vinegar
As senior citizen I suffer from the dreaded malady CRS.
2006 but used only 2 or 3 seasons and carb rebuilt last year. Runs great.
David F. Risch
Managing Director
Great Benefits USA
401-419-4650 - Direct Line
[https://docs.google.com/uc?export=download=1iPWGeVIdWdypHSMZPtJX0mxirxyZ4ZBN=0B9uSW32EcB8tZGxlWW1OMlJ6MXU0bmVaaFByQmlSVDMrOWNVPQ]
spray it on your canvas and it keeps away the green. plus it makes your
boat smell like a salad.
On Thu, Apr 1, 2021 at 8:01 AM Fred Hazzard via CnC-List <
cnc-list@cnc-list.com> wrote:
> As senior citizen I suffer from the dreaded malady
> CRS.
> Yesterday while visiting Fury I found a gallon
Head to the CnC website and compare specs. I am a standard rig 40-2.
From: John Conklin via CnC-List
Sent: Thursday, April 1, 2021 10:27 AM
To: Stus-List
Cc: John Conklin
Subject: Stus-List Re: C 40 Spinnaker
David,
I assume this may work on My C 37 ?
Thanks
John Conklin
On Apr 1, 2021, at
As senior citizen I suffer from the dreaded malady
CRS.
Yesterday while visiting Fury I found a gallon of white vinegar.
Hopefully, one of you can remind me what is for.
Thanks
Fred Hazzard
SV Fury
C 44
Portland, Or
Sent from my iPhone
Thanks to all of the subscribers that contributed to
David,
I assume this may work on My C 37 ?
Thanks
John Conklin
On Apr 1, 2021, at 10:11 AM, David Risch via CnC-List
mailto:cnc-list@cnc-list.com>> wrote:
I am selling a used once or twice airrex 700 Spinnaker for a 40-foot sailboat
it's on eBay if anybody's interested special pricing for
I am selling a used once or twice airrex 700 Spinnaker for a 40-foot sailboat
it's on eBay if anybody's interested special pricing for friends
Sent from my Android. Please forgive typos. Thank you.
Thanks to all of the subscribers that contributed to the list to help with the
costs involved.
27 matches
Mail list logo
