Stus-List Re: C 29 mk2 battery supports

Yes please! On Sat, Nov 18, 2023 at 3:02 PM Thomas Perison via CnC-List < cnc-list@cnc-list.com> wrote: > I don’t have dimensions - but can send you pics of rebuilding mine a few > years ago. Upgraded it to 3 total. > > Tom Perison > Therapy > 29-2 > Buffalo > > Sent from my iPhone > > > On Nov

Stus-List Re: Water in the oil

You can save the old one and have it pressure tested to confirm diagnosis, if good you can have it boiled out for next time. Any radiator shop should do. Get Outlook for Android From: Doug Mountjoy via CnC-List Sent: Saturday, November

Stus-List Re: C 29 mk2 battery supports

I don’t have dimensions - but can send you pics of rebuilding mine a few years ago. Upgraded it to 3 total. Tom Perison Therapy 29-2 Buffalo Sent from my iPhone > On Nov 18, 2023, at 11:47 AM, John Heaton via CnC-List > wrote: > > Hi folks - does anyone have the dimensions or a photo of

Stus-List Re: Engine hoses

Remember to check the fuel fill hose. I was working in a locker, one time, and brushed against the fuel fill hose. I discovered cracks in it, and after close examination I realized it needed to be replaced. Alan Bergen 35 Mk III Thirsty Rose City YC Portland, OR On Sat, Nov 18, 2023 at 10:31 

Stus-List Engine hoses

Just a reminder to all to check the hoses on your engine. Just completed an 11 day cruise on Touche'. Once in the home slip, I smelled coolant. Investigation revealed a pinhole leak in the hose that runs from the exhaust manifold to the heat exchanger on the back of my Universal 25XPB. On

Stus-List Water in the oil

Here is an update on my water\oil issue. As the oil cooler is raw water cooled, and the oil lines are attached via banjo fittings. Testing was next to impossible here. I opted to replace the cooler. I'm not 100% sure it was the cooler, and not severe condensation, but I feel good about the repair.

Stus-List C 29 mk2 battery supports

Hi folks - does anyone have the dimensions or a photo of the plywood battery supports on a 29 mk2? It looks like mine has rotted away and I can’t tell its original sizing. Thanks Double on the Rocks CAN 335 Toronto Please show your appreciation for this list and the Photo Album site and help

Stus-List Re: Recommendations to rebuild hydraulic cylinders for backstay

Thanks for that information—amazing what expertise is available via the listers—big shoutout to Stu!! My thought is that the shop could source all the o-rings/seals needed but they might not want to bother with the detective work involved and this time would drive up the repair cost. A ‘kit’

Stus-List Re: Recommendations to rebuild hydraulic cylinders for backstay

Charlie; You are essentially correct in assuming that an hydraulics shop can source the needed parts even though Navtec or other back stay adjuster maker no longer supply a kit. After nearly 40 years experience in the construction machinery and forklift industry, I can confidently say that