1 : 20.34
> C&C 27 Mk.V - Sail Area/Disp.1: 20.37
>
> So we're not very far behind you. Keep looking over your shoulder...
>
> Ken Heaton & Anne Tobin
> S/V Salazar - Can 54955
> C&C 37/40 XL - Hull # 67
> Cape Breton Island, Nova Scotia
>
> http:/
Was just looking at sail area to displacement ratio for C&C's on
sailboatdata.com and was surprised to see that my little 27 mark v and the
34/37R have the highest SA/D of any C&C's built by the original company other
than the SR models. Jerry J&J C&C 27 MKV.
Sent from my iPhone_
Funny - prop walk seems to be as little understood as sail drive. I have read
three different explanations - 1) the pressure on the water on the lower blade
is higher (the deeper you go the higher the water pressure); 2) the angle of
the prop shaft and 3) the upward and downward flow of the th
https://www.youtube.com/attribution_link?a=cyVRx6c_TnE&u=/watch?v%3DPoGMAEjiHmU%26feature%3Dem-subs_digest-vrecs&g=GeuiBLhXxAu6-WjfVBK83IUavUYfcFAriejNUGCfbfwhxGTXzzXRAwV9Jper8qVLBkuLlZTpxiWT0bXXqiJLITkQpVuorZ9LYkTFfJQo07l2EUcLlhiYL7Ix-CGxxsMtwb2aS78wrf4cCFwsORsanqC0g3KRx9rIGLYlAY9xEE2Dc1Q%3D
Sent
If it's rf noise generated by the alternator it may be coming in through your
GPS antenna as well as data or power lines. If it is rf noise you should be
able to hear it with a small AM radio held nearby (tune to around 1400 KHz).
I still think your voltage regulator is suspect. When the batt
This was posted in 2013. Jerry
StStus-List Owners Manual C&C 35 MKI
Stu stu at cncphotoalbum.com
Tue Dec 17 21:25:35 EST 2013
Earlier this year, a member on the list sent me the Owners Manual for the C&C
35 MKI and somehow or another I lost it. If someone has the manual please
contact me off t
Sorry. Jerry
Sent from my iPhone
> On Sep 30, 2016, at 11:03 PM, Russ & Melody via CnC-List
> wrote:
>
>
> Really. Jerome, did you check the link sent from your iPhone?
>
> There is no 35 mk-1 owners manual there. We're talking old school.
>
> In the ol' days a sailor didn't need no friggi
Mineral oil. Jerry
Sent from my iPhone
> On Sep 30, 2016, at 9:21 PM, Marek Dziedzic via CnC-List
> wrote:
>
> The best, by far, is Peggy Hall’s book “Get Rid of Boat Odors“. You can get
> it off Amazon or, better yet, from SBO (sailboatowners.com)
> (http://shop.sailboatowners.com/prod.ph
http://www.cncphotoalbum.com/chandlery_2/store.php?crn=227&rn=434&action=show_detail
C&C 35-1 Owners manual.
Sent from my iPhone
> On Sep 30, 2016, at 8:04 PM, Dennis C. via CnC-List
> wrote:
>
> Congrats!
>
> Go here:
> http://www.cncphotoalbum.com/other/Redwing%2035%20Equipment%20List.pd
for
excessively high voltage, consider 2.5 volts or more above the no-run voltage
described earlier excessive. This indicates that you need a new voltage
regulator.
-Original Message-
From: Jerome Tauber via CnC-List
To: cnc-list
Cc: Jerome Tauber
Sent: Fri, Sep 30, 2016 8:44
Sounds like the voltage regulator is defective. A VOLTAGE REGULATOR regulates
the charging voltage that the alternator produces, keeping it between 13.5 and
14.5 volts to protect the electrical. Your alternator voltage is too high
overcharging battery. When you turn off engine it is taking a f
We use open CPN for USPS course training on computers. We have a serial via
USB GPS puck attached and an AIS inexpensive receiver and antenna also via USB
port. Both work very well. I've used Plan 2 Nav (Jeppeson C Charts on my
Iphone) and have used Maptech software and I Nav as well. Most
Note also that Open CPN software is only available for Android tablets at this
time, not IPad. Jerry J&J
Sent from my iPhone
> On Sep 21, 2016, at 5:31 PM, Patrick Davin via CnC-List
> wrote:
>
> Oops - I didn't mean to turn this into an Apple vs Android debate! : ) But I
> can't resist res
(g) A vessel of less than 20 meters in length, when at anchor in a special
anchorage area designated by the Secretary, shall not be required to exhibit
the anchor lights and shapes required by this Rule. [Inld]
Sent from my iPhone
> On Sep 12, 2016, at 5:09 PM, David via CnC-List wrote:
>
> R
The forward 225 degree light halfway up the mast is a steaming or masthead
light. The 360 degree on top of the mast is an anchor light. The steaming
light should be shown while under power at night and the anchor light while at
anchor (not under way) but not required at a legal anchorage. Jer
I replaced my elbow with a a stainless steel unit available on eBay for under
$200. Comes with gasket. There are many available. See below for example.
Jerry J&J
Will you have a ham radio on board? Jerry
Sent from my iPhone
> On Sep 1, 2016, at 7:28 PM, Adam Trackracer via CnC-List
> wrote:
>
> Thought you guys might like this, me and my girl are sailin to the South
> Pacific and beyond on our 1973 C&C39, took me a while to find a 39 (favorite
> c&
Robert. I am interested in your boat. I plan on being at rendezvous and could
see it then. Jerry. J&J. 27-5.
Sent from my iPhone
> On Aug 31, 2016, at 9:50 PM, Robert Gallagher via CnC-List
> wrote:
>
> I'm moving on up. For sale:
>
> 1988 30 MKII
> Newer interior visions
> Bottom si
I have transited the East River many times. Do not look at low water at the
Battery. Look at current at Hell Gate. That is the most problematic area
with the most rapid currents and you want to make sure you pass through with
the current (on a flood). Hell Gate currents are listed in NOAA'
I sanded and refinished the companionway steps with semigloss marine poly. A
week later a friend slipped down the stairs and broke his foot. You can write
your own moral of the story. Jerry. J&J. C&C 27-5.
Sent from my iPhone
> On Aug 29, 2016, at 6:02 PM, Andrew Burton via CnC-List
> wr
Has anyone replaced the old square plastic C&C cabin dome lights with LED?
Any suggestions for easy replacement (Entire unit not bulb)? Thanks. Jerry.
C&C 27 mkv. J&J.
Sent from my iPhone
___
This list is supported by the generous donations of o
27-V 4'10" draft but is one of the best sailing boats C&C made. I have one
that may be for sale at end of season. Very nice condition with Yanmar 1G
diesel. Jerry J&J
-Original Message-
From: Chuck Gilchrest via CnC-List
To: cnc-list
Cc: Chuck Gilchrest
Sent: Mon, Aug 8,
>From what I can see on the internet Challenge Sailcloth is manufactured in
>Thailand. Not sure if any sailcloth is still made in U.S. Jerry J&J
-Original Message-
From: Frederick G Street via CnC-List
To: cnc-list
Cc: Frederick G Street
Sent: Sun, Aug 7, 2016 8:09 pm
Subject
This supplier has all those plastic parts. Check catalog.
http://us.essentracomponents.com/en-US/caps-plugs?src=em&utm_source=iContact&utm_medium=email&utm_campaign=1406_rebranding1_us&utm_content=1406_rebranding_us
Sent from my iPhone
> On Jul 31, 2016, at 8:49 PM, Richard Walter via CnC-List
A C&C 115 won 2nd in spinnaker class in the 2016 Around Long Island race. 190
nm.
PHRF - Spinnaker Division 7 - Warning Signal 1530
1 USA 52361 Frequent Flyer Beneteau First 36.7 Alistair Duke
84.030/Jul/16 - 08:38:151:17:03:15 1:12:37:15 1
http://us.essentracomponents.com/en-US/caps-plugs?src=em&utm_source=iContact&utm_medium=email&utm_campaign=1406_rebranding1_us&utm_content=1406_rebranding_us
Sent from my iPhone
> On Jul 29, 2016, at 9:56 PM, Lorne Serpa via CnC-List
> wrote:
>
> I need to replace a few caps that cover the bol
> My C&C 29-2 came with a Schaefer 1 inch traveller car that is no longer
> made. I found an inexpensive way of converting this car to a twin block car
> and it worked quite well. My 27-5 came with the same traveller car so I just
> did the same simple conversion and thought I share it with
My C&C 29-2 came with a Schaefer 1 inch traveller car that is no longer made.
I found an inexpensive way of converting this car to a twin block car and it
worked quite well. My 27-5 came with the same traveller car so I just did the
same simple conversion and thought I share it with list. The
Is it a fin or wing keel? Jerry. J&J 27 mkv.
Sent from my iPhone
> On Jul 7, 2016, at 4:49 PM, Pat MacDonald via CnC-List
> wrote:
>
> I bought a 1995 30MK II XL (1 of only 3 XL's made by C&C) last year in
> Ontario and brought it out to Alberta.
> Yes we do have a big lake to sail her
That truly is roach spray. We have lots of it in NY City. Jerry. J&J c&C
27v.
Sent from my iPhone
> On Jul 5, 2016, at 12:10 AM, Jim Watts via CnC-List
> wrote:
>
> Spray the roachy bit of the main with McLube, helps it slide through much
> easier.
>
> Jim Watts
> Paradigm Shift
> C&C
I replaced the windows on my 29-2. Had the tinted acrylic laser cut and
beveled. Much discussion of glue but the trick I used was running a jib sheet
from the port to starboard through the cars and onto each winch pressing a 2x4
across the windows and tightening with winch. Jerry
Sent from
Just replaced mine with stainless elbow. $120 on EBay. Jerry
Sent from my iPhone
> On Jun 13, 2016, at 10:49 AM, Jean-Francois J Rivard via CnC-List
> wrote:
>
> Hi Dennis,
>
> If the overheating comes back you might want to look at the exhaust mixing
> elbow. Mine seemed OK until it clo
I have a leak which appears to be coming from below the stuffing box from the
shaft tube itself. Has anyone ever experienced this. Can the tube be repaired
or does it have to be replaced. It appears that someone mounted a zinc on the
tube and the tube wore through there. The engine is a
Thanks but I opted to have the old one straightened. It looks terrible and I
should have gotten the new one. Jerry.
Sent from my iPhone
> On May 26, 2016, at 10:56 PM, Paul Hood via CnC-List
> wrote:
>
> Jerome,
>
> Stainless Outfitters is about 2 minutes from where I live. John is a go
Looked into one for my 27-5. Think rail is about the same. Here is the
correspondence. Jerry
Hi Jerome: Price of the rail is about the same. Shipping would be probably
around $150 + $25 brokerage. That is in cdn dollars.
Regards,John
- Original Message -
From: Jerome Tauber
To: Stain
Any suggestions for removing Polyglow other than their own product? Will
Ammonia work? Thanks. Jerry. J&J. 27mkV.
___
This list is supported by the generous donations of our members. If you like
what we do, please help us pay for our costs by d
I believe Dennis Conner won it
>>> back in Perth, Aus, in 1987.
>>>
>>> So, correct, it did not return to New York City but I am confident the
>>> Americans won it back with an even different keel..I have a book
>>> somewhere on the keel he use
(Sorry - first posted this as reply to wrong posting). Keel lift is a
horizontal, not vertical force. Keels are hydrodynamic foils - when they are
moved through water they cause both lift and drag forces to develop. Lift is
the positive lateralforce that allows a boat to move to windward -
Keel lift is a horizontal, not vertical force. Keels are hydrodynamic foils
- when they are moved through water they cause both lift and drag forces to
develop. Lift is the positive lateralforce that allows a boat to move to
windward - drag is the negative, resisting force. A good sailboat
Delrin®, an industry-trusted name for acetal homopolymer. Delrin® is a tough,
machinable thermoplastic with a high modulus of elasticity, high strength, good
rigidity, dimensional stability, and resistances to moisture, chemicals and
solvents. It has desirable toughness properties, performing
http://us.essentracomponents.com/en-US/caps-plugs/push-fit-plugs/panel-plugs/solid-locking-plugs/solid-locking-plugs-
This company and catalog has every size and shape and color plastic caps.
Jerry J&J
http://us.essentracomponents.com/shop
Caps & Plugs Application Guide
Our complete offering of caps & plugs organized by thread or hole size
Download PDF
124070-91290 - Yanmar Ignition Switch Key, 2 Pack
$14.75 each
Sent from my iPhone
> On Mar 24, 2016, at 5:08 PM, "Richard N. Bush via CnC-List"
> wrote:
>
> I find myself in need of a replacement key for my engine...a Yanmar, I know
> (or at least I think) they are interchangeab
Good find. You can use it with Open CPN which is free navigation software.
Jerry J&J
-Original Message-
From: Joel Aronson via CnC-List
To: cnc-list
Cc: Joel Aronson
Sent: Thu, Feb 25, 2016 3:38 pm
Subject: Stus-List AIS receiver
Just bought one of these to connect to a l
The bowlines should be tied in opposite directions so the flat side is facing
in against the shroud and doesn't get hung. In other words the port side
bowline should have the flat side facing the starboard side and vice versa.
This reduces the chance of hanging up on a shroud. Jerry.
C&C 2
I visited the Tartan C&C Fairport Marine Plant in Fairport, Ohio two years ago.
It was not much more impressive. Jerry C&C27-V J&J
-Original Message-
From: Rino Granito via CnC-List
To: cnc-list
Cc: Rino Granito
Sent: Mon, Feb 1, 2016 3:37 pm
Subject: Re: Stus-List Old C&C f
I was able to modify the new Schaefer end stops to fit the old track with a
little carving. Might work for Kenyon. Rig Right sells the new stop. Very
close. Jerry
Sent from my iPhone
> On Jan 3, 2016, at 10:39 AM, John and Maryann Read via CnC-List
> wrote:
>
> Our baby stay is attached
No. Unless you're interested in electronics or engines. Even the sail
manufacturers don't attend any longer. I sit every year at the USPS booth and
each year there is less for sailors. That said, a trip to NYC is always
worthwhile. You can check out the new subway station at 34th Street and
Ed. I will be sitting at the USPS booth during part of the show. May be there
Sunday. Stop by the booth. Jerry. J&J.
Sent from my iPhone
> On Dec 30, 2015, at 10:45 AM, Edd Schillay via CnC-List
> wrote:
>
> Listers,
>
> Anyone planning to go to the NY Boat Show on January 9 or 10? P
I had the same setup on my 24. Scuppers led straight down to a through hull
with a sea cock. However, if there is a leak above the water line it will only
occur only when boat is in motion and transom is submerged or healed. Try
closing the through hull sea cock on one side at a time and see
I sailed on one at Newport at the C&C Rendezvous last year and passed on on
the water (going in the opposite direction) on Gardeners Bay this summer. The
boat is a blast downwind. We were doing 11-12 knots in 9-10 knots of wind.
Upwind it is designed to sail on its chines so you better hav
I'm going to order a new mainsail for my 27-5. Is tri-radial cloth worth the
extra $500 over crosscut? Jerry
-Original Message-
From: Tim Goodyear via CnC-List
To: cnc-list
Cc: Tim Goodyear
Sent: Wed, Nov 4, 2015 9:25 am
Subject: Re: Stus-List Dimension Polyant Hydranet Radial
n GPS, put your music on the IPad and buy
a Galaxy tablet with cellular capability.
Rick Brass
Washington, NC
From: CnC-List [mailto:cnc-list-boun...@cnc-list.com] On Behalf Of Jerome
Tauber via CnC-List
Sent: Friday, October 02, 2015 11:27 AM
To: cnc-list@cnc-list.com
Cc: Jerome Tauber
Su
t disagree with that statement. My sony tablet with built in GPS works
> perfectly below decks, it is what I use for anchor watch.
> Graham Collins
> Secret Plans
> C&C 35-III #11
>> On 2015-10-02 12:42 PM, Jerome Tauber via CnC-List wrote:
>> Joe - that is a common m
Joe - that is a common misunderstanding. While the Iphone does not need cell
service for positioning it actually does use cell tower triangulation for
position and is not very accurate or fast without it. Moreover, if you are
below deck you will not get an adequate GPS signal. This is from t
2015 at 10:08 AM, Jerome Tauber via CnC-List
wrote:
I have been looking into this and there is an excellent solution. You can
plug your onboard GPS into a wifi transmitter and receive the signal anywhere
on your boat on your Ipad. This is compatible with INavx and other software.
You can
I have been looking into this and there is an excellent solution. You can
plug your onboard GPS into a wifi transmitter and receive the signal anywhere
on your boat on your Ipad. This is compatible with INavx and other software.
You can also transmit AIS if you have an AIS receiver and re
I was circumnavigating Shelter Island (NY Ling Island) in Gardiners Bay on my
27-V when I passed (going opposite direction) a C&C 30 One design. White hull
black North 1DL jib only flying. He was going upwind in about 15 knots and
moving very nicely. We were near the lighthouse out of Greenpo
West Marine. Jerry. J&J.
Sent from my iPhone
> On Sep 22, 2015, at 10:21 AM, Mitchell's via CnC-List
> wrote:
>
> The paint in my recessed stripes and stars is fading and peeling. Anyone have
> success with tape? How long tape will it last in the sun? Where did you get
> the tape?
> Len
"Lions Den". Jerry
Sent from my iPhone
> On Sep 17, 2015, at 9:20 AM, Andrew Burton via CnC-List
> wrote:
>
> I let my father do the work and just carried on his boat names; Raven for my
> Shields, and Peregrine after his C&C 27.
>
> Andy
> C&C 40
> Peregrine
>
> Andrew Burton
> 61 W Narr
Try Island Nautical Canvas
http://www.islandnauticalcanvas.com
Jerry C&C 27- V. J&J
Sent from my iPhone
> On Sep 16, 2015, at 6:17 PM, Al Serrato via CnC-List
> wrote:
>
> I have a 1981 C & C '34 with original cushions. I recently got an estimate
> from a local marine canvas shop for replac
I like Garmin. A friend has this unit on his Sweden. Weatherproof and
attractive design. Most important is that you can mount it where you can get a
clear signal view. Also high refresh rate. My chart plotter is all over the
place. I have to average speed readings. You can feed it into
I would go wireless. This is from Comar Systems web site. An NMEA WIFI unit
provides a low cost method of setting up a wireless network on board and to use
available Apps on your iPhone, iPad or PC to display all your electronic data
including position, AIS data, depth, wind, compass etc.
Wi
http://pages.ebay.com/link/?nav=item.view&alt=web&id=111757337397&globalID=EBAY-US
Same size and price Harken. Jerry
Sent from my iPhone
> On Sep 5, 2015, at 8:38 PM, james taylor via CnC-List
> wrote:
>
> Sorry Harry
> Bought them last night. To good a deal to pass up
> James
> Delaney
>
Saturday September 12th is the C&C NE rendezvous. Are there any Ham listers
from the Eastern US or Canada who would be available around 5pm EDT for a demo
QSO on 40 meters, say 7.188 MHz. Jerry. J&J.
Sent from my iPhone
> On Sep 2, 2015, at 9:47 PM, Jake Brodersen via CnC-List
> wrote:
8 knots in a C&C 26 with no current on a reach with white sails in 12 knots of
wind? Sounds more like a 30 one design. Jerry. C&C 27 V J&J.
Sent from my iPhone
> On Aug 25, 2015, at 12:15 AM, David Donnelly via CnC-List
> wrote:
>
> I will preface this by saying I consider myself a begi
Strobes are illegal technically even in emergencies. See the COLREGS (Rules 20,
21, & 36 - Rule 36 Signals to Attract Attention If necessary to attract the
attention of another vessel, any vessel may make light or sound signals that
cannot be mistaken for any signal authorized elsewhere in thes
If I was to put an anchor roller on now I would have it double as a sprit for
an asymmetric spinnaker. Long and sturdy with the roller doubling as a tack
block. Jerry. J&JC&C 27 V
Sent from my iPhone
> On Aug 17, 2015, at 7:48 PM, Barbara Hickson Fellers via CnC-List
> wrote:
>
>
>
Schematic for the new engine. Jerry J&J C&C 27V
___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com
Funny - Joe Posted the following on Sailnet -
"I do know of a sailboat that was A4 powered that burned and sank a couple of
years ago. It was a sistership to my own and I suspect they had the issue I
had. A 90 degree rubber elbow C&C used was not fuel rated, but tolerated
gasoline. Ethanol, not
A friend of mine had a similar issue. He changed all the filters and cleaned
the fuel. He checked out the fuel pumps. Turned out was none of the above,
just a loose fuel line that was letting air in. So check all you connections
on the fuel line from take to engine. Jerry J&J 27V J&J
Has anyone installed a Nicro solar vent through the cabin roof over the head?
Is the cabin roof cored? About how thick? I have an 1986 27-V. Jerry.
Sent from my iPhone
> On Jul 14, 2015, at 3:04 PM, Jim Watts via CnC-List
> wrote:
>
> I assume you took off the solar cell? That's how I a
The sound of the sea is enough for me. Jerry. J&J. C&C 27 V
Sent from my iPhone
> On Jul 13, 2015, at 3:17 PM, Knowles Rich via CnC-List
> wrote:
>
> Very tasteful…. Geesh!
>
> Rich Knowles
> Nanaimo, BC
> INDIGO LF38
> Boatless!
>
>
>
>
>
> On Jul 13, 2015, at 11:23, Edd Schillay via C
Should be capable of warp 8 with the new engine. Jerry. C&C27V J&J
Sent from my iPhone
> On Jul 10, 2015, at 2:14 PM, "Richard N. Bush via CnC-List"
> wrote:
>
> Per Edd's messageYy
>
>
> Richard
> 1985 C&C 37 CB; Ohio River,, Mile 596...still waitin' out high water
>
MFJ now makes th
Sent from my iPhone
> On Jul 8, 2015, at 6:49 PM, Bill Bina via CnC-List
> wrote:
>
> google: ham stick antennas
>
> There are lots of similar ones and even youtube videos showing how to make
> one yourself.
>
> Bill Bina
>
>> On 7/8/2015 6:43 PM, Andrew Frame via CnC-List
MFJ now makes them. Another good choice is Hu
Sent from my iPhone
> On Jul 8, 2015, at 6:49 PM, Bill Bina via CnC-List
> wrote:
>
> google: ham stick antennas
>
> There are lots of similar ones and even youtube videos showing how to make
> one yourself.
>
> Bill Bina
>
>> On 7/8/2015 6:43
I have an Icom 706 on my boat with rail mounted ham sticks. Rail is grounded
to keel as a counter poise. Jerry. WA2YMR. C&C 27V.
Sent from my iPhone
> On Jul 8, 2015, at 9:08 AM, "phorvati . via CnC-List"
> wrote:
>
> I have an m710 which I used on ham frequencies to hook up to winlink
I'm going to join her in a parade up the Hudson July 4th on my friends Sweden
38. Jerry. J&J 27-5. B
Sent from my iPhone
> On Jul 3, 2015, at 4:09 PM, Rick Taillieu via CnC-List
> wrote:
>
> She is going to be in Lunenburg, NS on July 18th. I plan on going down to
> see her.
> Many pic
That's a great video. Last piece of unwanted advice. Go electric repower.
Lighter, quieter, greener. No Holes for water intake and exhaust. No fuel
tank and odors. No transmission, oil, injectors, pumps, exhaust fumes or
filters. Regenerate your own power.
Jerry
Sent from my iPhone
I used teak oil and it grew mold and black spots over the winter. Bleached it
out as best as I could. That's why I have to refinish the interior wood.
I'll try miniwax stain spar varnish.
Sent from my iPhone
> On Jun 24, 2015, at 1:09 PM, Joel Aronson via CnC-List
> wrote:
>
> I bought
Does anyone know what C &C used to finish the interior teak in the 80's. Jerry
C&C 27mk V. J &J.
Sent from my iPhone___
Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of
page at:
h
CNG rises, propane sinks making propane much more hazardous if boat is properly
ventilated. See masquerade (movie with Rob Lowe).Jerry
Sent from my iPhone
> On Jun 16, 2015, at 8:09 AM, "Hoyt, Mike via CnC-List"
> wrote:
>
> CNG is safer than propane but burns cooler
>
> From: CnC-L
rship Enterprise
> C&C 37+ | Sail No: NCC-1701-B
> City Island, NY
> Starship Enterprise's Captain's Log
>
>
>
>
>
>
>
>
>
>
>
>
>
>
> On Jun 11, 2015, at 9:38 AM, Jerome Tauber via CnC-List
>
Atlantic Highlands when you can be in manhattan?Why bother coming to NYC.
See the new Freedom Tower and 9/11 Memorial at least. Jerry
Sent from my iPhone
> On Jun 11, 2015, at 9:29 AM, Jerome Tauber via CnC-List
> wrote:
>
> A bit further north in Weehawken is Lincoln Mari
A bit further north in Weehawken is Lincoln Marina. On the NY side is Chelsea
piers. Very expensive but right in the heart of Chelsea Neat a Packing
District and Soho. Can visit the new Whitney Museum and great restaurants. The
Sent from my iPhone
> On Jun 11, 2015, at 9:16 AM, Edd Schilla
I live in Manhattan. Liberty Landing is a good choice. A bit fu
Sent from my iPhone
> On Jun 11, 2015, at 9:16 AM, Edd Schillay via CnC-List
> wrote:
>
> Joel,
>
> Liberty Landing is a nice stop. Good docks. Amenities. The park is nice and
> there’s a great science museum nearby.
>
> Thro
I would try nylon bushings before replacing. Had them on my Rhodes 19. Jerry.
27mkv. J&J
Sent from my iPhone
> On May 29, 2015, at 6:18 PM, Brent Driedger via CnC-List
> wrote:
>
> Good day.
> I'm noticing year after year there is more and more play in my transom hung
> rudder. The 27
Exhaust elbow. Check for clogging. Yanmar recommends replacement every 7 or
do years. If clogged engine will overheat at high rpm. Jerry J&J.
Sent from my iPhone
> On May 4, 2015, at 9:19 PM, Tom Buscaglia via CnC-List
> wrote:
>
> We did a run last weekend to a local harbor for the
Take the Salmon out of it. Jerry
Sent from my iPhone
> On Apr 13, 2015, at 5:44 PM, Fred Hazzard via CnC-List
> wrote:
>
> Through an unfortunate accident my 4 hp 2 cycle Suzuki went to the bottom of
> the Columbia (fresh water) on Saturday. A diver is going to retrieve it
> tomorrow.
>
>
Thought a lister might be interested. Email Andre below. Jerry
-Original Message-
From: André Gillardin
To: jrtauber
Sent: Wed, Mar 18, 2015 6:09 pm
Subject: Foul gear jackets
Hello Jerry,
I have two jackets that I would like to sell ( I will put them on Craig's List
this
I like the new red ones. Is the new C&C selling them? Jerry
Sent from miPhone
> On Mar 18, 2015, at 3:52 PM, "Dennis C. via CnC-List"
> wrote:
>
> I suspect one of the issues here is pricing.
>
> Gladys probably wasn't making $60/hour. :) A commercial vendor may cut our
> margin.
>
>
Old or new style? The new company's hats are red with the new logo. A few
years back I visited the C&C plant in Fairport Ohio under Tartan. They gave
me the old style hat which I still have. They may have some still. Jerry.
C&C. 27V. J&J.
Sent from my iPhone
> On Mar 18, 2015, at 7:
He lived long and prospered. Yisgadol vyiskadash. J&J.
Sent from my
> On Feb 27, 2015, at 1:06 PM, Edd Schillay via CnC-List
> wrote:
>
>
>
>
>
>
> Edd M. Schillay
> Starship Enterprise
> C&C 37+ | Sail No: NCC-1701-B
> City Island, NY
> Starship Enterp
I had a C&C 24 and added genoa tracks inboard. I put and aluminum bar
underneath and epoxied all holes. Worked well. If I were to do it now I would
use setup on my 27V and put short tracks on the coaming. You can also add a
traveler across the seats.
Jerry C&C 27mkV J&J.
_
Andy. If you need crew I am in Montauk just a short distance from Block.
Jerry C&C. 27V J&J
Sent from my iPhone
> On Jan 25, 2015, at 10:44 AM, Andrew Burton via CnC-List
> wrote:
>
> As I sit here in my living room, bracing for the first "Storm of the Century"
> this year, what could be m
Hanks, Douglas Jr.
Muskrat: A Surprise Bid for the America's Cup, 1987 (A local favorite
around the Chesapeake Bay. A group of "good ole boys" (spelled drunks)
from the Eastern Shore of Maryland mount an America's Cup campaign in
1987 and take it to Australia. MUSKRAT is
OK now but no donate message. Jerome Tauber
-Original Message-
From: Jerome Tauber via CnC-List
To: bstratton ; cnc-list
Sent: Fri, Jan 23, 2015 11:02 am
Subject: Re: Stus-List message delivery problems
I have the same issue - Windows 7, browser is Firefox - server is AOL
I have the same issue - Windows 7, browser is Firefox - server is AOL. Jerome
Tauber
-Original Message-
From: Burt Stratton via CnC-List
To: 'Burt Stratton' ; cnc-list
Sent: Fri, Jan 23, 2015 10:51 am
Subject: Re: Stus-List message delivery problems
The email I just sent wa
I have the same issue. Jerome Tauber
-Original Message-
From: Burt Stratton via CnC-List
To: 'Burt Stratton' ; cnc-list
Sent: Fri, Jan 23, 2015 10:51 am
Subject: Re: Stus-List message delivery problems
The email I just sent was clean.
From: CnC-List [mailto:cnc-list-boun..
This list is provided by the C&C Photo Album and is free to subscribed members.
Please help us keep it free by donating today at:
http://www.cncphotoalbum.com/chandlery_2/store.php?crn=226&rn=428&action=show_detail
___
Well the C&C 30 One Design has no
101 - 200 of 246 matches
Mail list logo
