2009/3/20 Sebastian Hammerl list-openm...@omoco.de
Tony Berth schrieb:
2009/3/20 Sebastian Hammerl list-openm...@omoco.de
Tony Berth schrieb:
On Thu, Mar 19, 2009 at 8:31 PM, Sebastian Hammerl
list-openm...@omoco.de wrote:
try to start it from the commandline with parameter -d
I have SHR latest unstable and the latest cellhunter version.
In the very first beginning, when I switched to offline mode a log was
indeed created. After going online and run 'cellhunter_upload.sh' to upload
it to the cellhunter server, no log was re-generated? Why?
Thanks
Tony
that's what I thought too but cellhunter doen't create a new log when going
offline! That's exactly my problem. It did created once, and after
'cellhunter_upload.sh' deleted that file no new log is been generated any
more!
Thanks
Tony
On Thu, Mar 19, 2009 at 5:01 PM, Leonti Bielski prishe
On Fri, Mar 6, 2009 at 6:26 PM, Yoann ARNAUD yarn...@crans.org wrote:
Tony Berth a écrit :
which command did you use for that symbolic link?
ln -s ...
(man ln for arguments)
--
Yoann.
I did that but I get 'operation not permitted' as the Maps are located in my
SD card which is FAT32
On Thu, Mar 5, 2009 at 6:49 PM, Petr Vanek van...@penguin.cz wrote:
On Thu, 5 Mar 2009 17:58:11 +0100
Tony Berth tonybe...@googlemail.com (TB) wrote:
it seems that there is no log generated!
I'm using the latest package on the latest SHR unstable image!
Thanks
Tony
You have
On Fri, Mar 6, 2009 at 10:58 AM, Helge Hafting helge.haft...@hist.nowrote:
Tony Berth wrote:
On Thu, Mar 5, 2009 at 4:19 PM, Helge Hafting helge.haft...@hist.no
mailto:helge.haft...@hist.no wrote:
Tony Berth wrote:
after installing the latest SHR-unstable immage and tried
after installing the latest SHR-unstable immage and tried to edit the
tangoGPS config parameters, when saving the application crashes!
This wasn't the case with the previous image and the 0.9.3 tangoGPS version!
Any tip how to correct that?
Thanks
Tony
On Thu, Mar 5, 2009 at 4:19 PM, Helge Hafting helge.haft...@hist.no wrote:
Tony Berth wrote:
after installing the latest SHR-unstable immage and tried to edit the
tangoGPS config parameters, when saving the application crashes!
This wasn't the case with the previous image and the 0.9.3
did anyone tried FYP already?
Cheers
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Dear List,
after the latest SHR unstable update, tangoGPS was udated but the desktop
icon doesn't show any more! Is that only me?
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo
On Thu, Feb 19, 2009 at 1:21 PM, Klaus Kurzmann m...@mnet-online.de wrote:
* Tony Berth tonybe...@googlemail.com [090219 13:18]:
Dear List,
after the latest SHR unstable update, tangoGPS was udated but the desktop
icon doesn't show any more! Is that only me?
nop... you have to edit /usr
'!
Cheers
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On Thu, Feb 12, 2009 at 5:54 PM, GNUtoo gnu...@no-log.org wrote:
Dear List,
I don't know if there are any developments concerning the recording of
GSM
calls. The search in the archives didn't show anything I could use.
Thanks
Tony
understand the person you are calling.
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Dear List,
I don't know if there are any developments concerning the recording of GSM
calls. The search in the archives didn't show anything I could use.
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http
/navit/openmoko/svn/Packages
is already in the opkg conf file icluded!
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
On Wed, Feb 11, 2009 at 3:26 PM, Fernando Martins ferna...@cmartins.nlwrote:
Tony Berth wrote:
Dear List
when trying to install navit (= opkg install navit) I get following
error:
Collected errors:
* ERROR: Cannot satisfy the following dependencies for navit:
* gtk
Dear List,
there are cases where someone calls me, I try to pick-up the call but the
button 'answer' doesn't react! As a result the phone keeps ringing for ever!
Even if I re-start the xserver the phone keeps ringing! Any idea why that
happen?
Thanks
Tony
Dear List,
When the Alarm gets triggered appears a message only but no sound. Found
some 'answers' in the archives but none of them did work! Is something else
I'm missing?
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
On 2/10/09, rhn r...@o2.pl wrote:
Wiadomość Oryginalna
Od: Tony Berth tonybe...@googlemail.com
Dear List,
When the Alarm gets triggered appears a message only but no sound.
Found some 'answers' in the archives but none of them did
work! Is something else I'm missing?
Thanks
Tony
I
On Thu, Feb 5, 2009 at 5:47 AM, Nacho Seijo lists.na...@gmail.com wrote:
2009/2/3 Tony Berth tonybe...@googlemail.com
On Tue, Feb 3, 2009 at 5:41 PM, Valery Febvre vfeb...@easter-eggs.comwrote:
Tony Berth wrote:
did you try it on the current SHR unstable cause it doesn't start
did you try it on the current SHR unstable cause it doesn't start! It
crashes!
Thanks
Tony
On Tue, Feb 3, 2009 at 3:05 PM, Francesco de Virgilio
fradev...@gmail.comwrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Great app, thanks!! :D
Valery Febvre ha scritto:
Hi,
A new
On Tue, Feb 3, 2009 at 5:41 PM, Valery Febvre vfeb...@easter-eggs.comwrote:
Tony Berth wrote:
did you try it on the current SHR unstable cause it doesn't start! It
crashes!
Yes, I use SHR unstable.
For a first install, I think there is no problem.
If a previous release of Neon
Dear list,
I just did an upgrade on the latest SHR unstable image and now isn't
possible to connect via ssh to the FR any more. I get the 'No route to host'
error. Were some changes? I thing the usb0 interface gets a inet6 address
only?
Any advice?
Thanks
Tony
just installed the latest unstable and when booting, networking was fine but
after re-start I can't ssh to FR any more. IPv4 is not set any more!
Any ideas?
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http
,
this wasn't the case!
Thanks
Tony
On Fri, Jan 30, 2009 at 3:18 PM, Alexandre Girard alx.gir...@gmail.comwrote:
Same here, but a least I don't have more echo on the phone.
To set IPv4 from the openmoko terminal:
ifconfig usb0 192.168.0.202 netmask 255.255.255.0 broadcast
192.168.0.255
I can ssh
more feedback:
even if I set the IPv4 address directly via the terminal in the FR, I can
connect via ssh from my server but FR doesn't get connection to the Internet
any more! Please not that resolv.conf is holding the correct values.
Thanks
Tony
On Fri, Jan 30, 2009 at 3:48 PM, Tony Berth
, even this fix already used in
some phones and get positive result.
Regards,
- --
Neng-Yu Tu (Tony Tu)
Openmoko, Inc.
Support.
They've been really silent (ignoring us?) on this point each time it has
been asked.
-Message d'origine-
De : community-boun...@lists.openmoko.org
iEYEARECAAYFAklH0yQACgkQOjLpvpq7dMqgVwCdH0eel9le/VhaAksC6e+voBx+
lL8AoILkpurOZbcb9ImRUDKXJC1g0vwR
=gxsD
-END PGP SIGNATURE-
happened to myself once as well by using the latest testing repos!
Tony
___
Openmoko community mailing list
community
and the Dutch Post! Once (in Germany!) it took them 3
weeks to find the package (not an Openmoko one!). Finally I got it but ...
what a trouble!
Cheers Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo
I used 'screen -DR' and went fine
Thanks
On Fri, Dec 12, 2008 at 1:49 AM, roguem...@roguewrt.org wrote:
Hi Tony,
Tony Berth wrote:
Dear Group,
if I 'opkg upgrade' once, shouldn't do the same when I reboot and try to
upgarde one more time? Why does opkg keep 'upgrading'?
Probably
Dear Group,
tried to install debian, followed http://wiki.debian.org/DebianOnFreeRunner,
but when booted from the SD card I get an error cause it can't find
uImage.bin! Any hint what could have been wrong?
Thanks
Tony
___
Openmoko community mailing
...@puzzle.ch wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hey tony,
your first partition on the sd-card should be fat-formated. there must
be a file called uImage.bin .
if it's isn't the, the bootloader couldn't load the kernel! take the
kernel for debian (don't know out of the head
the error I get is:
unable to read from uImage.bin
Wrong Image Format
Thanks
On Fri, Dec 12, 2008 at 2:29 PM, Tony Berth tonybe...@googlemail.comwrote:
indeed in the first partition is a uImage.bin file, but doesn't boot! It
claims that can't find that uImage.bin! When I do fdsk on the card
On Fri, Dec 12, 2008 at 2:55 PM, arne anka openm...@ginguppin.de wrote:
Not if you update your NAND uboot to a recent (i.e sometime in the last
four
months or so) version. Then ext2 is fine. I've had mine running this way.
More recent uboot's also have some better charging code and
On Fri, Dec 12, 2008 at 3:07 PM, arne anka openm...@ginguppin.de wrote:
I have the latest gta02v5_and_up-u-boot.bin installed!
So you say that I should use the SD_PART1_FS=vfat ./install.sh all
option?
no. what i am saying is, check in the wiki page you used the section
Adjusting your
unfortunatelly not! The only '.log' which exists in the whole system is:
/var/volatile/tmp/x.log
Thanks
Tony
On Wed, Dec 10, 2008 at 5:28 PM, Thomas Bumbl [EMAIL PROTECTED] wrote:
I think it should be /home/root/*.log
2008/12/10 Tony Berth [EMAIL PROTECTED]
probably a stupid question
Dear Group,
I have Om2008.9-gta02-20081117.rootfs.jffs2 installed updated from the test
repos and was trying to get a qwerty keyboard running. I did follow '
http://www.unixarea.de/openmoko.txt' paragraph 1 but can't see the keyboard
yet!
Any help?
Thanks
Dear Group,
how is it possible to completely remove the Sudoku application which comes
by default with the distro? I don't want just to 'hide' the icon from the
GUI!
Thanks
___
Openmoko community mailing list
community@lists.openmoko.org
Dear Group,
if I 'opkg upgrade' once, shouldn't do the same when I reboot and try to
upgarde one more time? Why does opkg keep 'upgrading'?
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman
for helping me with bitbake.
And special thanks
[1] http://omoney.googlecode.com/files/omoney_milestone1-1-r0_armv4t.ipk
[2] http://code.google.com/p/omoney/
Hi I did install it , rebboted FR but when I tried to run I got an
'Application Error' dialog!
Thanks
Tony
too though
@Tony Berth:
please post the log and which rootfs you use
everything works fine here
@all: omoney should be available over the shr repo
so just opkg install omoney when you are on shr
2008/12/10, Tony Berth [EMAIL PROTECTED]:
On Sun, Dec 7, 2008 at 7:30 PM, Thomas Bumbl [EMAIL
On Fri, Dec 5, 2008 at 3:25 PM, Tony Berth [EMAIL PROTECTED] wrote:
On Fri, Dec 5, 2008 at 2:45 PM, Andy Green [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| When in BootLoader, shows that there is a card of 3MB
sector size 65535
[ 34.84] VFS: Can't find a valid FAT filesystem on dev mmcblk0.
I know that other people had similar or exactly the same problem but
couldn't figure out if they found a solution to that.
Any help is much appreciated.
Thanks
Tony
On Thu, Dec 4, 2008 at 7:13 AM, John Lee [EMAIL PROTECTED] wrote:
On Tue, Dec 02, 2008 at 06:34:09PM +0100, Tony Berth wrote:
Dear list,
I just installed the latest 2008.9 kernel and jffs2 and when I connect to
a
debian 4 box it doesn't get listed as a USB device. As a result, I can't
On Fri, Dec 5, 2008 at 2:45 PM, Andy Green [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Somebody in the thread at some point said:
| When in BootLoader, shows that there is a card of 3MB and when I
| boot with the latest 2008.9 jffs I get following dmesg
On Wed, Dec 3, 2008 at 11:43 AM, Vasco Névoa [EMAIL PROTECTED] wrote:
I've followed the community update tip and upgraded from OM2008.8
stable to testing. After a little havoc caused by the previously
installed gsm0710muxd, I finally got it to work on the GTA02v5.
I've only had it for a day
On 12/3/08, Marco Trevisan (Treviño) [EMAIL PROTECTED] wrote:
Franky Van Liedekerke wrote:
Ok, so I'm feeling totally moronic now ... I'm pretty sure I entered my
microSD card some 3 months ago, but I can't seem to figure out how to
remove it again ... some howto for a gta02? I can't seem to
Dear list,
I just installed the latest 2008.9 kernel and jffs2 and when I connect to a
debian 4 box it doesn't get listed as a USB device. As a result, I can't
establish USB networking. Am I doing something wrong here?
Thanks
Tony
___
Openmoko
On Tue, Dec 2, 2008 at 7:24 PM, Brock [EMAIL PROTECTED] wrote:
You must add g_ether to /etc/modules to get the module to load on
boot.
On 2008.12.02.18.34, Tony Berth wrote:
| Dear list,
|
| I just installed the latest 2008.9 kernel and jffs2 and when I connect to
a
| debian 4 box
, as wolfgang said, we
hope could resolve this NDA issue in someway that could help people
develop 3D development on FR.
- --
Neng-Yu Tu (Tony Tu)
Openmoko, Inc.
Support.
-BEGIN PGP SIGNATURE-
Version: GnuPG v1.4.9 (MingW32)
Comment: Using GnuPG with Mozilla - http://enigmail.mozdev.org
On Wed, Nov 12, 2008 at 8:00 PM, Robin Paulson [EMAIL PROTECTED]wrote:
2008/11/13 Yorick Moko [EMAIL PROTECTED]:
On Wed, Nov 12, 2008 at 4:32 PM, Tony Berth [EMAIL PROTECTED]
wrote:
is it possible to use any current microSD card (4 or 8 GB!) and
microSDHCs
as well? Are any hardware
://www.nlpagan.net
Running on Mandriva Linux 2008 and Ubuntu 8.10
I tried the stikytape mod by using just some paper and it does work fine!
Thanks for your help
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http
On Thu, Nov 13, 2008 at 4:50 PM, Petr Vanek [EMAIL PROTECTED] wrote:
On Thu, 13 Nov 2008 09:03:53 +
They can reflect the same underlying issue, GPIO control of Glamo pins
that talk to the ASIC in the LCM is broken somehow / sometimes.
| That level shifter is definitely evil, if you pop
to that recent license issue?
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi,
is it possible to use any current microSD card (4 or 8 GB!) and microSDHCs
as well? Are any hardware limitations?
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi,
I was trying to power-on my FR but having the battery removed and didn't
succeed! Goes up to a point and then stops! Is a reason for that?
Thanks
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org
Sorry you are right! I forgot to mention that it was plugged in the USB
port!
On Tue, Nov 11, 2008 at 10:43 AM, Flyin_bbb8 [EMAIL PROTECTED] wrote:
On Tue, Nov 11, 2008 at 12:35 PM, Tony Berth [EMAIL PROTECTED]wrote:
Hi,
I was trying to power-on my FR but having the battery removed
On Tue, Nov 11, 2008 at 11:03 AM, Christian Adams [EMAIL PROTECTED] wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Am 11.11.2008 um 10:35 schrieb Tony Berth:
Hi,
I was trying to power-on my FR but having the battery removed and
didn't succeed! Goes up to a point and then stops
Hi Greg,
I have a brand new device (2 weeks old!) and sinve I installed 2008.9
i do face WSOD. Never dropped the device! This issue is a show stopper
as it prevents to use it as a phone.
to the developers: PLEASE give the highest priority to that.
Thanks
Tony
On 11/9/08, Greg [EMAIL PROTECTED
to use?
In some e-mails in that list, I saw people were referring to the 'testing'
one and would like to verify before doing so.
Thanks for your help
Cheers
Tony
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org
Indeed that was the problem. 'allow-hotplug' instead of 'auto' is the
solution! PLEASE correct the WIKI asap!
Thanks for your prompt support
Cheers
Tony
On Wed, Nov 5, 2008 at 10:13 PM, joezeewails [EMAIL PROTECTED] wrote:
Stefan Monnier wrote:
That's probably not right. You probably
done!
Thanks
On Thu, Nov 6, 2008 at 11:01 AM, Max Giesbert [EMAIL PROTECTED] wrote:
@Tone Berth: The wiki is a community thing. You should update it yourself.
Tony Berth schrieb:
Indeed that was the problem. 'allow-hotplug' instead of 'auto' is the
solution! PLEASE correct the WIKI asap
the wiki posted solution was tested by myself on a the currebt debian and
did work! Are you using the same environment?
Cheers
Tony
On Thu, Nov 6, 2008 at 10:46 AM, Denis Johnson [EMAIL PROTECTED]wrote:
I have had this setting for months it does not work for me.
Whenever I want to connect
TX packets:0 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:0 (0.0 b)
---
and ping to 192.168.0.202 returns nothing!
Your help is much appreciated!
Thanks
Tony
, 8MB for vfat, rest is using ext3.
Tony Tu
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
ID 0403 6010. They see if the
UART and openocd could work.
Regards,
- --
Neng-Yu Tu (Tony Tu)
Openmoko, Inc.
Support.
Some questions could be answered by reference following link:
Wiki - http://wiki.openmoko.org
Download - http://downloads.openmoko.org
Freerunner Introduction -
http
setting is not correct in the
config file(load the wrong config file)
Hope this helps.
=
- --
Neng-Yu Tu (Tony Tu)
Openmoko, Inc.
Support.
Some questions could be answered by reference following link:
Wiki - http://wiki.openmoko.org
Download - http://downloads.openmoko.org
Freerunner
because I can see the debug board from my laptop when i
do 'lsusb'. Any ideas? Thanks!
Lynn
Does your openocd using correct setting file? v3 board could connect to
neo1973, because it basically compatible old boards.
--
Tony Tu (Neng-Yu Tu)
Openmoko, Inc.
Support
is not working well with openocd.you could try but the lib
binary in the same folder (How I use it in Fedora 5 before) if you did
not install ftdi correctly. Maybe other people could give better suggestion.
Tony Tu (Neng-Yu Tu)
Openmoko, Inc.
Support
.
Regards,
Tony Tu (Neng-Yu Tu)
Openmoko, Inc.
Support.
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
. (As a Java programmer with 10 years'
experience, I've finally given up trying.)
If you ask for return, we still take this request and review it. Please
mail me your contact information, order number, and issue description.
Tony Tu (Neng-Yu Tu)
Openmoko, Inc.
Support
? I don't mind swapping out
parts if they're available at reasonable prices.
We might have spare part or re-work package, but still under discussion.
What spare part you need?
Tony Tu (Neng-Yu Tu)
Openmoko, Inc.
Support.
___
Openmoko community
anyone flames me, I just want them to consider that they chose to
subscribe to this list and chose to read this message...
*tony does a humble bow*
cheers!!
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org
ykstortnilats [EMAIL PROTECTED] writes:
Lin Mac wrote:
I have signed at http://wiki.openmoko.org/wiki/GroupSales, but there are 4
only...
I've signed up there too.
5 left...
I'll try to contact Openmoko on Monday.
hmmm...I tried calling them by phone but that did not work
, but their phone system is broken or something.
It says I should dial 9 for operator, but then it just hangs up. :(
I figured when they have time they will read this mailing list and hopefully, if
possible, act upon our comments.
Cheers,
Tony
Hi,
I live in Taipei.
I was wondering if there was a simple and easy way to buy a freerunner here in
taipei.
There is no distributor so its not very simple.
Can I just sort of drive up to the head office and go to a service counter or
something like that?
btw, my mail address is [EMAIL PROTECTED]
, and we are
working on it. Our sales discussing with our distributor about proper
services model, but do not have consensus yet, I will keep update it.
Thanks,
Tony Tu
Openmoko, Inc.
Support
___
Openmoko community mailing list
community
-July/003837.html
Tony Tu
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
change the preset, you must change the value on every call
yes, freerunner image's alsa configuration files located at
usr/share/openmoko/scenarios/
Tony Tu
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org
Let me add a bit more here...Tony Tu will be moderating this support
list and helping to organizing a knowledge base out of everyone's
questions / support issues. He will explain more shortly...
Please try your best to keep this list on topic. It's for support for
existing device owners
.
Regards,
Tony Tu
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
code information.
Thanks,
Tony Tu
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi flexed-
Could you scp this ipk into GTA02, and try install from GTA02?
Tony Tu
flexd ??:
Im actually having some trouble installing that, it says:
/
[EMAIL PROTECTED]:/usr/bin# opkg install
http://people.openmoko.org/tony_tu/GTA02/util/gps/openmoko-agpsui_0.1+svnr7-r0_armv4t.ipk
in NOR flash), and
using boot from SD card function into full system, then re-flashing NAND.
NOR also have 2 MB space, you might could port any thing into 2 MB space
and try another flashing way (bt/wi-fi/etc), if you got debug board. But
we never tried.
Tony Tu
in openmoko-devel list. And jserv also done some
chinese input/ui mod before, but I am not sure about detail items done.
Tony Tu
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
question in openmoko-devel list. And jserv also
done some chinese input/ui mod before, but I am not sure about detail
items done.
Tony Tu
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
Hi Arne:
you mean, one can flash the om from an sd card, too?
or after booting up from sd card as described above one still needs to
connect to a computer?
Yes, direct flash from SD card without USB.
Tony Tu (Neng-Yu Tu)
___
Openmoko community
technique/service.
3. Which of these services are available in a common gsm network in
Germany/Europe/worldwide? Can these services be used by GTA02?
The limit from software side of view should same as google map mobile
version.
Regards,
Tony Tu ( Neng-Yu Tu
and fits our production software/process. So this
components was approved. But due to quantiles limit, the same time PVT1
and PVT2 pre_MP units don't _All_ apply these changes.
As I known, all the PVT and pre-MP units will ship back Taipei for RD
usage and sample, won't ship to customers.
Tony
way.
Tony Tu
___
Openmoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
for people who really interested in
embedded power management system.
Thanks for NXP free their document ;)
Dear Tony
We have carefully reconsidered how to best serve the OpenMoko community
in supporting our PCF50633 product, and our decision has been to allow
you
, but by the comments, we're so cheap!)
Regards
Tony
___
OpenMoko community mailing list
community@lists.openmoko.org
http://lists.openmoko.org/mailman/listinfo/community
' battery.
There are more steps to go through internally, related to certification,
some sort of calibration. Tony, do you know more details?
The cell's capacity will increase slightly to 1250 mAh (before was 1200
mAh).
The battery cell is 1250mAh for GTA02 coulomb battery cell, and the
coulomb
Yes, I think we can confirm that every GTA02 will ship with this new
'smart' battery.
There are more steps to go through internally, related to certification,
some sort of calibration. Tony, do you know more details?
The cell's capacity will increase slightly to 1250 mAh (before was 1200
mAh
will give us more freedom over our means of communication, and not with
an eye for monetary recompense.
We are traveling a road built by those who came before. It's not quite
right to start asking for toll.
- Tony
. that addictive Photo game where you have to spot the 5 differences in
x seconds
7. KMines or something like MS's Minesweeper
8. Tron? :)
I am planning a Nethack port. It should be quite easy.
- Tony
___
OpenMoko
101 - 197 of 197 matches
Mail list logo