On Tue, May 26, 2009 at 04:32:55PM -0600, Angus Ainslie wrote:
On May 26, 2009 03:09:20 pm Marcel wrote:
Hello,
I have installed intone 0.51 from
http://www.opkg.org/packages/intone_0.51_arm.ipk (where the dependency
libelementary0 is still there). Once I launch it, the binary is
On Thu, Jun 04, 2009 at 08:55:58AM +0200, Laszlo KREKACS wrote:
Hi!
I use the distribution on NAND as an SD card reader. I load the OS,
connect to my laptop,
and I write the new distro to the uSD card. It is impossible to do it
on the same
SD card, from where the OS is running. You cant
On Sun, Jun 28, 2009 at 8:55 AM, jeremy jozwikjerjoz.for...@gmail.com
wrote:
with the freerunner connected to machine:
[r...@localhost sbin]# ./ifconfig
eth0 Link encap:Ethernet blah blah blah
lo Link encap:Local Loopback
blah blah blah
You should
On Wed, Jul 08, 2009 at 09:00:52PM -0700, jeremy jozwik wrote:
shr-unstable 20090624:
@om-gta02 ~ $ intone
Segmentation fault
thats it.
Try to remove ~/.intone. It segfaulted for me too, but removing of
~/.intone helped.
___
Openmoko community
On Thu, Jul 09, 2009 at 11:03:39PM +1200, Robin Paulson wrote:
2009/7/9 Marcel tan...@googlemail.com:
Damn, you're right. And if it worked, it'd have borked my intone already,
that requires libid3 which in turn requires libstdc++ and libgcc1 =
4.3.3, om2k9 only contains 4.1.2 :/
You
On Mon, Jul 20, 2009 at 01:47:19AM +0200, Sebastian Krzyszkowiak wrote:
On 7/20/09, Richy klemms...@gmail.com wrote:
Why isn't a tremor-version included in SHR?
I noticed the lags, installed tremor and it is SO much better now^^
Please add tremor-mplayer to the repository
Please send
Hi,
sorry for delay, my previous post of this patch was stopped by too
large attachement rule, sorry for this still quite big gziped one.
In attachement is patch for OE repo (for shr-import branch few weeks old),
which will add support for -vo glamo in mplayer_svn.git.
I rebased glamo patch
On Mon, Jul 20, 2009 at 05:08:03PM +0200, PaulTT wrote:
when did you -or andrzej- posted the patch above to mplayer
development mailing list?
i couldn't found it in there
(the only thread nameing glamo was of oct 2008, and not really a patchset)
please do.
I couldn't found it there too,
On Mon, Jul 20, 2009 at 06:18:24PM +0100, Thomas White wrote:
I'm fascinated that you managed to get a picture (of anything) on the screen
using the exa-via-dri branch at the moment :).. It contains only a small
amount of code leading up to the point when I realised the serious problem
with
On Thu, Aug 13, 2009 at 09:39:20AM +0200, Michael Pilgermann wrote:
Hi Edder,
thx for your feedback regarding new features for PISI. I think, they are all
really interesing suggestions ... please see my comments below.
Hi Michael,
thx for working on PISI.
I would like to finish OE bbfiles
On Thu, Aug 13, 2009 at 11:49 AM, Martin Jansa martin.ja...@gmail.comwrote:
I have no experience with python, but I can try to prepare setup.py for
setuptools next week, if you have no time or interest in it and then
send you patch.
I had some spare time.. so before going for vacation, here
have always just copied the files into my ipkgs)
Michael
Martin Jansa wrote:
On Thu, Aug 13, 2009 at 11:49 AM, Martin Jansa martin.ja...@gmail.com
mailto:martin.ja...@gmail.com wrote:
I have no experience with python, but I can try to prepare setup.py
for
setuptools next
On Tue, Aug 18, 2009 at 08:17:49AM -0700, jeremy jozwik wrote:
morning all. i was just sitting here on my debian laptop, poking
around with tango gps. now my laptop does not have any sort of gps so
i get the no gps found deal at the bottom. that got me thinking, has
anyone setup there
On Mon, Aug 17, 2009 at 02:08:53PM +0200, Michael Pilgermann wrote:
(cross post from SHR list)
Dear all,
For an Openmoko PIM Synchronization tool (called PISI) I developed a
module to integrate with SyncML-servers this weekend. It is all running
fine on my Linux box (desktop) already.
On Wed, Aug 19, 2009 at 01:01:53PM +0100, Thomas White wrote:
On Tue, 18 Aug 2009 11:38:12 +1000
Chris Samuel ch...@csamuel.org wrote:
I haven't seen anyone else post about this yet, but this looks really neat!
(Found via Planet Ubuntu)
On Wed, Aug 19, 2009 at 08:27:30PM +0300, Timo Jyrinki wrote:
2009/8/19 Martin Jansa martin.ja...@gmail.com:
I'm using this driver for some time and it behaves realy good. I didn't even
noticed any garbled text or artifacts, which is great for this state of
development :).
You
On Fri, Aug 21, 2009 at 12:13:04PM +0300, Risto H. Kurppa wrote:
- Still I think there's a need for a platform to promote ~working
apps in an appealing way.
Yes that's true and I think that opkg.org is doing just that.
Only few small parts are missing.
1) Use it rather as nice showroom, not
On Fri, Aug 21, 2009 at 11:59:30AM +0200, Sebastian Krzyszkowiak wrote:
On 8/21/09, Martin Jansa martin.ja...@gmail.com wrote:
On Fri, Aug 21, 2009 at 12:13:04PM +0300, Risto H. Kurppa wrote:
- Still I think there's a need for a platform to promote ~working
apps in an appealing way.
Yes
On Wed, Aug 26, 2009 at 09:08:49AM +0200, Adolph J. Vogel wrote:
However its not clear to me how I would get an *.pkg from bitbake. Just
running bitbake with the .bb file does not seem to work.
Any clarification on this issue would greatly be appreciated.
Did you try:
1) bitbake
On Sun, Aug 30, 2009 at 04:45:56AM -0500, ANT wrote:
Leonti wrote:
BTW, can you make bitbake file for it so it can be included in SHR
repositories?
Here is an _untested_ bb recipe for appraw. Somebody, test it please and
post here if it works or not.
Thanks!
works for me.. attached
On Tue, Sep 01, 2009 at 09:57:06PM +1200, Robin Paulson wrote:
i installed the nEo theme a few days back and love it - so much
faster, more consistent, it's great
i'd like to use the nEo boot screen also, in place of the 'don't
panic' splash, but illume segfaults whenever i try to open the
On Thu, Sep 03, 2009 at 11:14:26AM +0200, Sebastian Spaeth wrote:
Angus Ainslie wrote:
Fine with me, but what is gpsd for? are you planning for an fso-less
environment and no fso-gpsd in the SHR feed?
If you are interested in the clients only, why not make an gps-clients
package...
spaetz
On Tue, Sep 1, 2009 at 12:26 PM, Sebastian Krzyszkowiak seba.d...@gmail.com
wrote:
Both should be obsoleted. libframeworkd-phonegui-efl is dead, and we
don't plan to use etk at all in new stack.
Strange I tried to remove libframeworkd-phonegui-efl-theme-*
and whole directory
On Fri, Sep 04, 2009 at 07:13:07AM -0500, Mario Huelsegge wrote:
c_c wrote:
After trying both the mplayer-glamo and the mplayer-low versions I can
say that neither really seems to solve the issue.
Probably more tuning of mplayer is required - or perhaps there is
another problem
in mplayer svn (carefull my up is only 2mb/s).
http://jama.homelinux.org/org.openembedded.dev.gta/ipk/armv4t/
Martin Jansa wrote:
I should try intone-video or some other gui instead of using mplayer
from terminal :)
Intone-video has some issues - since the standard mplayer is slow
On Fri, Sep 04, 2009 at 11:36:43PM -0500, c_c wrote:
http://jama.mk.cvut.cz/mplayer_0.0+1.0rc2+svnr29644-r12_armv4t.ipk
Thanks. Will try it and post back.
Maybe try rather -r13 or/and -r14 (links in attachement), I've included
config files for setting default -ac to tremor,mad and -vo to
On Fri, Sep 04, 2009 at 11:36:43PM -0500, c_c wrote:
http://jama.mk.cvut.cz/mplayer_0.0+1.0rc2+svnr29644-r12_armv4t.ipk
Or when desktop at home is running then there will updated build every
day, if there is a change in mplayer svn (carefull my up is only 2mb/s).
Jansa martin.ja...@gmail.com
Hi Martin,
2009/9/8 Martin Jansa martin.ja...@gmail.com:
I've updated them for latest mplayer code and used them in OE repo.
http://lists.openmoko.org/pipermail/community/2009-July/051593.html
Many thanks, I've merged your changes into master of that fork repo.
Let me
On Tue, Sep 8, 2009 at 1:06 AM, Bernd Prünster bernd.pruens...@gmail.comwrote:
didnt really read the ml for about 1 month now, but there are somi
issues with teh neo theme (read somethign about it in th launcher
thread also in the germa freeyourphone forum.
i am currently moving to another
On Mon, Sep 14, 2009 at 10:44:21AM +0200, Michael Pilgermann wrote:
So my question: has anybody got any experiences with
- attaching a Freerunner to a bike (maybe even incl. sun protection)
Haven't seen wit sun protection, but this looks good
http://wiki.openmoko.org/wiki/Biking#Bike_Mounts
On Mon, Sep 14, 2009 at 01:41:54PM +0200, Bernd Prünster wrote:
2009/9/13 Martin Jansa martin.ja...@gmail.com:
just edje_decc the edj files of which the theme consists and you have
the sources.
br
I don't need .edc, just all files in other format then ipkg itself?
I can extract them
On Mon, Sep 14, 2009 at 06:41:36PM +0200, Bernd Prünster wrote:
Martin, u talk with mrmoku so you get git access since you already
patched the theme.
Sofar I just patched new bbfiles for it, but I'll have git access for
initial import of your theme to shr-theme.git and then you should get
one
On Wed, Sep 16, 2009 at 05:19:51PM +0200, Bernd Prünster wrote:
2) As you said before I tried to decompile all edj files before pushing
it to shr-theme.git repository, but .edc file decompiled from
elementary-theme-neo_0.2_armv4t.ipk is invalid (ends in the middle of
curled braces) and
On Sat, Sep 26, 2009 at 11:12 AM, Nikita V. Youshchenko yo...@debian.orgwrote:
What
you _can_ do is construct a mini Linux environment that provides a boot
menu / usb-dfu, and is booted by Qi in the normal way. This would place
those tools in regular Linux userspace, i.e. much more
On Sat, Sep 26, 2009 at 11:06 AM, arne anka openm...@ginguppin.de wrote:
so, to make it short:
- the missing holder is missing by design
- the availability of the design files should enable everbody, who knows
how to, to create its own design and, susbsequently, casing
- maybe a
to continue his work on this..
Someone expirienced with glamo code should take a look on my changes and
it would be great to use DRM code from Thomas White to access glamo from
mplayer too.
Balrog'2 reply:
Hi Martin,
2009/9/8 Martin Jansa martin.ja...@gmail.com:
I've updated them for latest
On Mon, Nov 09, 2009 at 09:29:38PM +0100, Richy wrote:
afaik 2.6.31 will be used in next shr-unstable. Available some time
soon, hopefully
No there is still 2.6.29 from andy-tracking now..
But 2.6.31 is in OE repo now and it works really good.
On Mon, Nov 9, 2009 at 19:05, arne anka
On Wed, Nov 11, 2009 at 08:37:32PM +0100, A.A. wrote:
Hello,
can I install kernel 2.6.3x on openmoko freerunner gta02?
Where can I download it?
shr build is here
http://build.shr-project.org/tests/mrmoku/2.6.31/images/om-gta02/
but its not officially released and userland fully ported to
On Thu, Nov 19, 2009 at 10:30:22PM +0100, Bernd Prünster wrote:
Thomas Zimmermann wrote:
* The neo theme is also nice and fast. It is not installed by
default, but it is in the feeds. You can easily install in with opkg
install shr-theme-neo.
I am quite sure that the nEo theme will
On Sat, Nov 21, 2009 at 07:50:07PM +0100, Christ van Willegen wrote:
Hi,
I started Navit (form the command line) and it complained about a
missing libgps (version 17). Since I regularly link .16.so to .17.so,
I went looking for that library, but it isn't there!
Is there a package I should
On Sun, Nov 22, 2009 at 12:05:08AM +0100, Christ van Willegen wrote:
Hi,
On Sat, Nov 21, 2009 at 8:15 PM, Martin Jansa martin.ja...@gmail.com wrote:
On Sat, Nov 21, 2009 at 07:50:07PM +0100, Christ van Willegen wrote:
I started Navit (form the command line) and it complained about
On Mon, Nov 23, 2009 at 10:12:21PM +0100, Carsten Gerlach wrote:
Hello at all,
What does this message mean?
Multiple packages providing same name marked HOLD or PREFER. Using latest.
What can I do to fix this issue?
In the current case I tryed an update from navit, it cames from
On Tue, Nov 24, 2009 at 01:07:40AM +0300, Gennady Kupava wrote:
Of course, device is unusable without Thomas kernel patch. With that
patch it's really fast like a... like a usual device, except some things
like tangogps with large map, and main screen. I didn't notice if
someone post prebuild
On Wed, Nov 25, 2009 at 11:44:13PM +0100, Fox Mulder wrote:
Tanogps uses gpsd, so this could not be the problem.
But now i tried by accident (opkg update downgraded navit r2797 to shr-u
version r2735) the navit version in the shr repository (r2735) and this
version works and connects to the
On Thu, Nov 26, 2009 at 03:06:35PM +, Arigead wrote:
Hello all,
I'm working on a project and I think it'd be cool as to show off the
project's work on a phone. The OpenMoko phone ;-)
Unfortunately the project is implemented in Java, which I'm no fan of on
anything but a web server
On Sun, Nov 29, 2009 at 01:43:59AM +0100, Jens Seidel wrote:
Hi,
Hi,
How to add a destination? I select as Country Germany, and my City followed
by Street and Number. And now? Any click on Map, Bookmark and Destination
does nothing. I assume I have to be online for this step, this is
On Sun, Nov 29, 2009 at 02:14:35PM +0100, Marc Bantle wrote:
Hi Jens,
Jens Seidel schrieb:
Hi,
I always wondered how people use navit. I started it already a few times but
find it (in contrast to tangogps) completely unusable.
Once I start it I just get an empty background.
On Sun, Dec 06, 2009 at 08:17:13PM +0100, Christ van Willegen wrote:
Hi,
Navit on latest SHR-U keeps crashing when I touch the screen. No error
messages are given to the bash prompt. Only 'gdb: not found'.
Does anyone experience the same?
Christ van Willegen
Use navit.xml config from
On Tue, Dec 08, 2009 at 12:46:02AM -0800, c_c wrote:
Hi,
Have posted updated e-tasks in a new thread.
http://n2.nabble.com/e-tasks-r14-for-shr-u-tp4131221ef1958.html
Hi,
is this different from svnrev 14 in svn? If yours package works
better than the one in shr-feeds then we should
On Thu, Dec 17, 2009 at 08:56:20PM -0800, c_c wrote:
Hi,
Here's the latest release of shr-launcher.
http://n2.nabble.com/file/n4185053/shr-launcher_local-r0.4_armv4t.ipk
shr-launcher_local-r0.4_armv4t.ipk
shr-launcher was also updated in shr feeds to latest version, its still
building
On Sat, Dec 26, 2009 at 09:25:57PM +0100, Christoph Mair wrote:
Hello,
I tried to use SHR the ubi images on my freerunner, but they did not work.
Does someone know the parameters which are passed to mkfs.ubifs? I think that
the ubi fileystem is created for NAND flashes with subpage
On Mon, Jan 04, 2010 at 02:37:14PM +0100, Christoph Mair wrote:
Quote from http://www.linux-mtd.infradead.org/doc/ubi.html#L_subpage:
Indeed, let's consider a NAND flash with 128KiB eraseblocks and 2048-byte
pages. If it does not have sub-pages, UBI puts the the VID header at physical
On Mon, Jan 04, 2010 at 02:37:14PM +0100, Christoph Mair wrote:
Ah great!, thanks
Remember that ubi0:rootfs specifies the volume name. The current ubinize.cfg
sets this name to om-gta02-rootfs, so change this to ubi0:om-gta02-rootfs
I've removed some UBI debug after max_posedon request and
On Thu, Jan 07, 2010 at 08:46:51AM -0300, Werner Almesberger wrote:
Michael Pilgermann wrote:
the OpenMokoProjects page is back online - thanks to whoever did this.
That would be Joachim. I'll add my thanks too !
Unfortunately, there still appear to be problems with accessing
certain
On Fri, Jan 08, 2010 at 11:01:23AM +0200, Tony Berth wrote:
any chance to draw some attention on the following?
Thanks
Tony
can you try with newer qi?
http://build.shr-project.org/shr-unstable/images/om-gta02/qi-s3c2442-1.0.2-r0+gitr0+c38b062a609f1442e6a9e13005cfbdfd59a5ac0d.udfu
Cheers,
On Wed, Jan 6, 2010 at 2:21 AM, Martin Jansa martin.ja...@gmail.com wrote:
3) update Qi with dfu-util
qi built here
http://build.shr-project.org/shr-unstable/images/om-gta02/
is still using jffs2 in kernel params
but you can you binary from here
http://jama.homelinux.org
On Fri, Jan 08, 2010 at 08:25:29PM +0200, Tony Berth wrote:
On Fri, Jan 8, 2010 at 11:07 AM, Martin Jansa martin.ja...@gmail.comwrote:
can you try with newer qi?
http://build.shr-project.org/shr-unstable/images/om-gta02/qi-s3c2442-1.0.2-r0+gitr0+c38b062a609f1442e6a9e13005cfbdfd59a5ac0d.udfu
On Tue, Jan 12, 2010 at 09:43:55AM +0100, Thomas Franck wrote:
new SHR-U updates, which is causing a bit of a problem now.. (keeps
telling me about md5 mismatch and refuses to install two vital fso
components)
still md5 mismatch? should be fixed about 1,5 hour ago
--
uin:136542059
On Fri, Jan 15, 2010 at 02:04:56PM +0100, Davide Scaini wrote:
On Fri, Jan 15, 2010 at 12:39 PM, daniele_athome
daniele.ath...@gmail.comwrote:
I've just upgraded SHR-unstable recipes from git, efl revision is still
44960.
--
daniele_athome
On Mon, Jan 18, 2010 at 04:08:51AM -0800, Mike Crash wrote:
I have upgraded my Debian system on GTA02 and found, that the new udev is not
compatible with current kernel in Debian. So I have compiled andy kernel and
also upgraded the X.org server with new version. All works fine, but I have
On Thu, Jan 21, 2010 at 10:17:51AM +0100, Thomas Zimmermann wrote:
Am Donnerstag 21 Januar 2010 10:06:50 schrieb Vaudano Luca:
No, I didn't.
Now it's only DEPENDS = elementary.
Thanks
Then you should do it. You need the libary in your bitbake tree and not on
your buildhost system.
On Thu, Jan 21, 2010 at 10:35:07AM +0100, Vaudano Luca wrote:
My application doesn't depend directly on blkid.
I don't get how you solve your problem in your buildhost.
Please check if that's the case (check/send that error - linker command).
Regards,
--
uin:136542059
On Wed, Jan 27, 2010 at 03:10:27PM +0100, Patryk Benderz wrote:
[cut]
6
Before this menu disappears, write in the desktop shell
dfu-util -d 0x1d50:0x5119 -a kernel -R -D uImage-om-gta02-latest.bin
IMHO it is enough to run:
# dfu-util -a kernel -R -D uImage-om-gta02-latest.bin
P.S.
On Thu, Jan 28, 2010 at 04:25:37PM +0100, KaZeR wrote:
Le 28/01/2010 15:47, n...@el-hennig.de a écrit :
There is a bug open at navit's bugtracker about that :
http://trac.navit-project.org/ticket/524
This is a regression since rev 2844. I'm personally using a rev26?? on
my FR, with
On Thu, Jan 28, 2010 at 04:33:21PM +0100, n...@el-hennig.de wrote:
Then this is probably another issue for you, because the regression in
MG (reiseplanner) was caused by the use of new tags in OSM which
weren't added to MG.
Does your OSM map version match navit's revision? If you use an
On Thu, Jan 28, 2010 at 07:12:39PM +0100, Lars Hennig wrote:
Am Donnerstag 28 Januar 2010 schrieb n...@el-hennig.de:
The search works with MP maps. I could not test OSM, since I will update
the map at home later this evening. The search with my current OSM map does
at least not crash the
On Fri, Jan 29, 2010 at 10:15:55AM +0800, William Kenworthy wrote:
shr-testing is probably the most usable out-of-the-box at the moment.
Only a few annoyances rather than show stoppers.
IMHO best way is to install both shrs on different partitions and switch
to 2nd if something goes wrong.
On Fri, Jan 29, 2010 at 03:11:49PM +0800, William Kenworthy wrote:
Interesting - cant say Ive noticed anything bad - quite the reverse.
I'm not using shr-t or any .29-rc3 kernel, so I cannot comment. But on
shr ML and trac there was few reports about not getting GPS lock or GSM
channel (even
On Fri, Jan 29, 2010 at 07:55:00AM +0100, Xavier Cremaschi wrote:
Martin Jansa a écrit :
Upgrading navit on root from 1:0.1.0+svnr2902-r5.4.4 to
1:0.1.0+svnr2934-r5.4.4...
Downloading
http://jama.homelinux.org/org.openembedded.shr/armv4t/navit_0.1.0+svnr2934-r5.4.4_armv4t.ipk
On Tue, Feb 16, 2010 at 02:01:53PM +0100, Thomas HOCEDEZ wrote:
Hi mokists, here's a challenge of the day contest :
I just reflashed SHRu (feb 15). And I was surprised to see a
touch-calibration utility at really startup ! Nice idea. But only
problem : I touch my screen anywhere by
On Tue, Feb 16, 2010 at 02:13:33PM +0100, Valery Febvre wrote:
Valery Febvre wrote:
Thomas HOCEDEZ wrote:
Hi mokists, here's a challenge of the day contest :
I just reflashed SHRu (feb 15). And I was surprised to see a
touch-calibration utility at really startup ! Nice idea. But only
On Thu, Feb 18, 2010 at 09:16:36PM +1100, Michael Smith wrote:
On Thu, 18 Feb 2010 11:01:39 +0100
Olivier Migeot larry...@gmail.com wrote:
Just an idea, about DeskCat : since adding more categories - in order
to remove desktop clutter - will _actually_ add new desktop clutter in
the mean
On Thu, Feb 25, 2010 at 06:50:42PM -0800, jeremy jozwik wrote:
so i reflashed to 20100212 a while ago. but i was overseas and did not
have a working sim card. back home i go and try to makes some phone
calls only to discovery everyone is complaining about my call quality.
i, not wanting to
On Fri, Feb 26, 2010 at 01:00:15PM -0800, jeremy jozwik wrote:
On Thu, Feb 25, 2010 at 10:26 PM, Martin Jansa martin.ja...@gmail.com wrote:
mterm2
thanks, that should be added to the wiki if it replaces mickeyterm.
Then add it..
mickeydbus - mdbus, mickeyterm removed from shr-lite
mdbus2
On Mon, Mar 01, 2010 at 01:09:24PM +0100, Radek Polak wrote:
Otherwise the new kernel runs really nice. Bluetooth and accelerometers
should
be quite easy to fix. I dont know about the touchscreen in X. Any other
distro
that uses 2.6.32 kernel has X server all right?
With 2.6.32 built
On Mon, Mar 01, 2010 at 03:58:26PM +0100, Radek Polak wrote:
On Monday 01 March 2010 13:31:26 Martin Jansa wrote:
On Mon, Mar 01, 2010 at 01:09:24PM +0100, Radek Polak wrote:
Otherwise the new kernel runs really nice. Bluetooth and accelerometers
should be quite easy to fix. I dont know
On Thu, Feb 11, 2010 at 10:47:55AM -0800, Mike Crash wrote:
After preview about month ago here is finally first public version of MC
Navi. Keep in mind it is still in hard development and this day I found some
bugs, which are not yet fixed in this release (I didn't want to stop the
release,
On Wed, Mar 03, 2010 at 04:32:51PM +, Neil Jerram wrote:
On 3 March 2010 16:08, Martin Jansa martin.ja...@gmail.com wrote:
Or some already existing patch for compatibility with gpsd-2.90?
That's an interesting question. Are you considering gpsd for SHR,
instead of ogpsd + fso-gpsd
On Sun, Mar 07, 2010 at 01:28:02PM +0100, Petr Vanek wrote:
We started working on it on last September, with the support of the
Italian Telefoninux.org community, and after 6 months (thursday was
our half-birthday :P) we want to share the effort of the 6 core
members of the team with you.
On Thu, Mar 18, 2010 at 05:14:08PM +0100, Sander van Grieken wrote:
On Thursday 18 March 2010 15:34:42 n...@el-hennig.de wrote:
But today I've tried an 'opkg update' and now I see :
$opkg list-upgradable | wc -l
682
Will such a big upgrade be ok or do I have to wait until Sunday
On Sun, Mar 28, 2010 at 11:36:55PM -0800, c_c wrote:
Hi,
No Problem. Just thought of asking anyhow.
Thanks
Hi,
where is source of this updated version?
There is no new commit on
http://code.google.com/p/shr-launcher/source/list
:/
Thanks
--
uin:136542059
On Wed, Mar 31, 2010 at 01:59:52AM +0200, pike wrote:
On April 1st, 2009, Werner Almesberger wrote
April 1 is not over yet ;-) [1]
Following up on that discussion, I decided to
write a bunch of shell scripts to read/write sms,
calls, manage your address book etc. At first,
they were
On Wed, Mar 31, 2010 at 02:35:25PM +0200, pike wrote:
Hi
http://wiki.openmoko.org/wiki/User:Pike/Thone
Haven't tried yet, but from description it looks usefull (I'm using my
neo mostly only remotely over ssh connection :)). So I'm already
preparing bb recipe for that to put it in shr-u
On Thu, Apr 01, 2010 at 12:29:47AM +0200, pike wrote:
Hi
http://wiki.openmoko.org/wiki/User:Pike/Thone
I have .ipk now
http://jama.homelinux.org/org.openembedded.shr/all/thone_0.5-r0.4_all.ipk
Cool! Thanks!
Now, as was to be expected, I fixed some bugs
and upped a new version,
On Thu, Apr 01, 2010 at 10:40:26AM +0200, pike wrote:
Hi
http://wiki.openmoko.org/wiki/User:Pike/Thone
I'm not going to host that .ipk.. but add recipe to shr and it will be
in SHR feeds as any other app :).
Bear with me :-) The bitbake recipe refers to the ipk ?
bitbake recipe is
On Thu, Apr 01, 2010 at 12:31:12AM -0800, Mike Crash wrote:
Hello, I'm going to release new version of MC Navi and I want to make maps
available for direct download. So I want to ask, what country do you need?
Hi, is new version compatible with gpsd-2.90?
mcnavi is failing to build in shr
On Thu, Apr 01, 2010 at 11:58:45PM +0200, pike wrote:
Hi
Bear with me :-) The bitbake recipe refers to the ipk ?
bitbake recipe is build description which instructs bitbake how to
create correct .ipk or .dep or .rpm or whatever from source archive.
In thone case it's repackaging
On Thu, Apr 01, 2010 at 02:58:59AM -0800, Mike Crash wrote:
Yes, it is compatible with 2.90, just uncomment in mgps.h
#define GPSD_API_19 1
I will attempt to autodetect gpsd version, but it seems the version
number in gps.h is the same as in previous version, so currently I don't
know
Done in SHR-U feeds.
Regards,
On Sun, Apr 11, 2010 at 9:40 AM, c_c cchan...@yahoo.com wrote:
Hi,
I've managed to fix the problem - which turned out to be poor programming
from my side. Have committed the fixes to the svn. Hopefully, an updated
build should be out soon.
--
View this
On Wed, Apr 14, 2010 at 11:33:57PM +0100, Neil Jerram wrote:
able to try SHR for very long. (In Debian, I can just switch back to
fbdev.)
Have you tried to switch to fbdev in SHR? It's as easy as in debian.
opkg install xf86-video-fbdev and update xorg.conf
Regards,
--
uin:136542059
On Thu, Apr 15, 2010 at 12:27:36AM +0100, Neil Jerram wrote:
r...@om-gta02 ~ $ opkg install xf86-video-fbdev
Collected errors:
* Cannot find package xf86-video-fbdev.
Is that SHR just too old, would you say?
Hi,
I'm sorry, I was sure only for SHR-U not SHR-T..
I've built it in SHR-T
On Thu, Apr 22, 2010 at 07:59:27AM +0200, Dr. H. Nikolaus Schaller wrote:
I tried to fetch the latest kernel sources from
http://git.openmoko.org/?p=kernel.git;a=summary
for learning something, but it appears that the server has some
failure:
iMac:tmp hns$ git clone
On Wed, May 05, 2010 at 12:57:41PM +0200, n...@el-hennig.de wrote:
For me it does not automatically, but as workaraound you can start
shr_elm_softkey from the terminal and then it works fine.
I found an even better way to workaraounf this problem automatically:
I created a wrapper
On Tue, May 18, 2010 at 12:24:27AM +0200, mobi phil wrote:
maybe then merging gdrm stuff from gdrm branch from git.openmoko.org
and rest from gdrm-for-merging?
or what would be the best to merge to have both stable 2.6.32 and
drm/kms?
It's nothing to do with merging, I just made a
On Mon, May 17, 2010 at 07:28:11AM -0700, sferic wrote:
Hello to all,
I try straight to start python idle. I get the following messages:
r...@om-gta02 ~ $ idle
Traceback (most recent call last):
File /usr/bin/idle, line 3, in module
from idlelib.PyShell import main
File
On Tue, May 18, 2010 at 03:52:40AM -0700, sferic wrote:
Thanks for the reply.
But what does this mean? (Apology for the stupid question. I am new in this
business...)
Do I have to wait for a recompiled version of python-tkinter (which I have
to reinstall with the option
On Tue, May 18, 2010 at 07:42:38AM -0700, sferic wrote:
Did I notice that I have installed SHR Testing? I believe, only indirectly by
the indication of the path of gcc-pre-4.4.3.
Ah sorry I didn't notice, there was similar temporary dir in
shr-unstable dir (already removed it).
So far I
later and report my experiences).
Would it be a good idea to remove those sections permanently, so that remain
idle even after an update of tk?
Sorry I cannot comment on tk issues and I don't even know
python-idle/python-tkinter.
Anyway - Many thanks to Martin Jansa
Well now it's fixed only
On Wed, May 19, 2010 at 01:52:08AM -0700, sferic wrote:
OK, a break for the night is a good idea, if one can think of nothing more:
Today I removed the MouseWheel-Sections from /usr/lib/tk8.4/listbox.tcl and
/usr/lib/tk8.4/text.tcl. After this idle starts and seems to be usable (I
will try
On Mon, May 31, 2010 at 08:22:59AM +0200, Christ van Willegen wrote:
I keep on getting 'TICKET_CREATE privileges are required to perform
this operation' when creating tickets.
Do I need anything more than a login?
Did you confirm your e-mail?
Regards,
--
uin:136542059
1 - 100 of 155 matches
Mail list logo
