btw: the last days I have moved around a lot with my FR between home,
office and a hospital, ... but without any reboot:
[EMAIL PROTECTED]:~# uptime
09:31:05 up 2 days, 27 min, 1 user, load average: 0.12, 0.25, 0.29
and when I came today morning in my office, the FR Wifi came up just
fine;
El día Friday, October 03, 2008 a las 12:44:10PM -0700, Michael Shiloh escribió:
> Charles Pax wrote:
> >
> >
> > On 10/3/08, *Matthias Apitz* <[EMAIL PROTECTED]
> > <mailto:[EMAIL PROTECTED]>> wrote:
> >
> > I own the FR gadget n
El día Friday, October 03, 2008 a las 01:34:10PM -0400, Charles Pax escribió:
> On 10/3/08, Matthias Apitz <[EMAIL PROTECTED]> wrote:
> >
> > I own the FR gadget now for 2-3 weeks, I think, and I'm so happy with it
> > and I use it in daily work as I did
m, one from
Nokia or Ericson, with a camara to take pictures in the subway, well
just go for it and buy it; if not stop screaming and make use of what
you have and see what we could do;
just my honest thoughts about;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gr
Hello,
Is it somehow possible to feed the PIN from a file in rootfs into the
PIN dialog of 'qpe'? Thx
I know it's not very secure, but normal people will not know how to read
files in a FR :-)
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder
Hello,
How can I use cetain services the GSM offers, like
- hiding caller ID ever/never/next-call
- re-direct incoming calls to mobile voicebox on busy/no-answer/any
Sorry, if this is a FAQ, but I don't see it on the Wiki;
thx
matthias
--
Matthias Apitz
Manager Technical Su
=0/3
Retry:on
Encryption key:X Security mode:open
Power Management:off
Link Quality:207/94 Signal level:-144 dBm Noise level:-96 dBm
Rx invalid nwid:0 Rx invalid crypt:1487 Rx invalid frag:0
Tx excessive retries:55 Inv
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://www.oclc.org/ http://www.UnixArea.de/
b http://gurucubano.blogspot.com/
A compu
Quality=16/94 Signal level=-79 dBm Noise level=-95 dBm
Encryption key:on
Extra:bcn_int=100
Extra:wpa_ie=...
i.e. Wifi for me it works fine now;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 820
El día Thursday, October 02, 2008 a las 06:45:59PM +1000, Alex Osborne escribió:
>
> On 01/10/2008, at 2:07 AM, Matthias Apitz wrote:
>
> >
> >Any hint about the name of a larger font that could be used with
> >'xterm -fn ...'? I'm as well missi
El día Wednesday, October 01, 2008 a las 09:55:31AM -0400, Joel Newkirk
escribió:
> On Wed, 1 Oct 2008 15:32:23 +0200, Matthias Apitz <[EMAIL PROTECTED]> wrote:
> > El día Wednesday, October 01, 2008 a las 01:37:52PM +0200, Matthias
> Apitz
> > escribió:
> >
&g
El día Wednesday, October 01, 2008 a las 01:37:52PM +0200, Matthias Apitz
escribió:
>
> Hello,
>
> The Wiki page http://wiki.openmoko.org/wiki/GPRS describes how to make
> GPRS working by hand in Om2007.2 and most of the stuff for chat-scripts
> and PPP options seems to be
places; ok, what is todo with 'qpe'?
thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://www.oclc.org/ http://w
El día Tuesday, September 30, 2008 a las 08:52:14PM +0800, William Kenworthy
escribió:
> On Tue, 2008-09-30 at 14:37 +0200, Matthias Apitz wrote:
> > El día Tuesday, September 30, 2008 a las 08:11:48PM +1000, Alex Osborne
> > escribió:
> >
> > > Matthias Apit
El día Wednesday, October 01, 2008 a las 08:30:00AM +0100, Arigead escribió:
> Matthias Apitz wrote:
> > El día Tuesday, September 30, 2008 a las 02:38:51PM +0100, Arigead escribió:
> >
> >
> >> Hello all,
> >> Want to play with the wifi icon on t
when talking to the GSM modem.
Thanks for the hint. Yes, I'm aware of the Wiki about GPRS and reading
all this I was thinkig: well at certain point we need a terminal to the
'modem' of the SIM card to talk AT commands directly to see what the SIM
or network is responding. Thx again
is in the FR?
Thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://www.oclc.org/ http://www.UnixArea
Hello,
Any hint about the name of a larger font that could be used with
'xterm -fn ...'? I'm as well missing 'xlsfonts' in FR :-(
Thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-6
txpower auto channel 1 ; killall
wpa_supplicant ; killall udhcp ; ifup eth0 ; sleep 20"
Icon=wifi
Terminal=false
Type=Application
Categories=Application;Utilities;
SingleInstance=true
StartupNotify=true
the icon will appear and of course you have an action Exec=...
matthias
--
Matt
El día Tuesday, September 30, 2008 a las 08:11:48PM +1000, Alex Osborne
escribió:
> Matthias Apitz wrote:
> > I'm trying to bring up the eth0 with
> >
> ># ifup eth0
> >
> >this works very unreliable; in (let's say) 8 of 10 cases it can't
> >
El día Tuesday, September 30, 2008 a las 11:28:18AM +0200, Xavier Bestel
escribió:
> On Tue, 2008-09-30 at 11:06 +0200, Matthias Apitz wrote:
> > Hello,
> >
> > I'm using the Wifi-method described in
> >
> > http://wiki.openmoko.org/wiki/Neo_FreeRunn
o; strange, isn't
it? there must be something broken in kernel land, I think;
or should I file a bug track report?
Thx for a helping hand
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89
/bin/lint-wifi.py", line 9, in
import gtk, os
File "/usr/lib/python2.5/site-packages/gtk-2.0/gtk/__init__.py", line 82, in
init()
NameError: name 'init' is not defined
Any idea what I have done wrong? Thx
matthias
--
Matthias Apitz
Manager Technical Supp
; that's all.
Ofc I can measure the two AA cells by my own, but not the rest (the
space for the platine of the converter and the USB connector); that's why
I was asking for the size of the original box because in this it fits;
thx for your feedback anyway
(and don't top post :-))
El día Monday, September 22, 2008 a las 11:17:58PM +0200, Matthias Apitz
escribió:
>
> Hello Stacy,
>
> I've stumbled over your page http://www.millions.ca/~stacy/mintyboost/
> and as an owner of the FreeRunner I will build this nice box; thanks for
> your pioneer work
saver after 30
secs);
is there a way to control these 'settings' values from the shell in the
FR?
thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
El día Sunday, September 28, 2008 a las 07:24:26PM +0200, "Marco Trevisan
(Treviño)" escribió:
> Matthias Apitz wrote:
> > Just for sharing a nice idea:
> >
> > I've installed with
> >
> > # opkg install x11vnc
> >
> > a VNC s
o.jpg
http://www.unixarea.de/dialer.jpg
HIH
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://www.oclc.org/ http://www.Uni
is not associating
at all; the entry in /etc/wpa_supplicant/wpa_supplicant.conf reads:
network={
ssid="santaclara"
key_mgmt=WPA-PSK
psk="XXX"
}
again, it is the same as I use in my laptop; and I have no idea why it
El día Thursday, September 25, 2008 a las 03:50:21PM +0100, Al Johnson escribió:
> On Thursday 25 September 2008, Matthias Apitz wrote:
> > El día Thursday, September 25, 2008 a las 03:16:43PM +0100, Arigead
> escribió:
> > > Hello all,
> > > I'm looking fo
27;ve not done too much investigating into Wifi as I
> believe that it has its issues on the FR.
...
Isn't wpa_supplicant doing exactly this (it does for me on my normal
laptop) having /etc/wpa_supplicant.conf as the database for all your
known Wifi networks?
matthias
--
Ma
abandoned lease 192.168.0.202.
because the DHCP server sees that the IP 192.168.0.202 can be ping'ed
through the interface cdce0;
How this should work correctly for the usb0 interface in the FreeRunner?
Thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Grue
e need, and it was much simpler to implement
this once here
.
This package contains unstripped shared libraries. It is provided primarily
to provide a backtrace with names in a debugger, this makes it somewhat easier
to interpret core dumps. The libraries are installed in /usr/lib/debug and
are autom
I need by SSH'ing to the Gadget;
what should be there per default?
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]>
the system or to old for
compiling 'illume'; has anymody setup an 'illume' environment in FreeBSD
successfull? If not I have to setup a VM for Ubuntu :-(
thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germ
eaning and effects *could* be;
Obrigado
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://www.oclc.org/ http://www.UnixArea
ure values, but
when the call gets established the values are pulled down to some
defaults; where could I change this?
thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-1
orrect PIN, but
without knowing in detail how to do this :-(
Thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://ww
in this script '/sys/devices/platform/' don't
match my current kernel, for example it reads:
SYS_FORCE =
"/sys/devices/platform/s3c2440-i2c/i2c-adapter/i2c-0/0-0073/force_usb_limit_dangerous"
but this file does not exist :-(
matthias
--
Matthias Apitz
Man
El día Tuesday, September 23, 2008 a las 11:12:05AM +1000, Sarton O'Brien
escribió:
> On Monday 22 September 2008 17:14:45 Matthias Apitz wrote:
> > [EMAIL PROTECTED]:~> uname -a
> > Linux albatros 2.6.5-7.97-smp #1 SMP Fri Jul 2 14:21:59 UTC 2004 i686 i686
> > i3
nough
power for one next reboot to re-charge via USB; what would be such a
value? 10% or even less? that the beast comes up again to be charged
again with the power supply?
thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
[EMAIL PROTECTED]:~> uname -a
Linux albatros 2.6.5-7.97-smp #1 SMP Fri Jul 2 14:21:59 UTC 2004 i686 i686 i386
GNU/Linux
[EMAIL PROTECTED]:~> ./dfu-util -V
FATAL: kernel too old
Segmentation fault
i.e. what is the minimum required kernel version for df-util?
thx
matthias
--
Ma
Hello,
Concerning the download of new images from
http://downloads.openmoko.org/releases/Om2008.8-update/
(for example): are there any MD5 sums to ensure the correctnes of the
files and the download?
thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg
some seconds later it turns to full green again;
is this somewhat a known bug?
Thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PRO
out/faq/ans5/
how is this electrically organised in the GTA02 that I could just use a gender
changer to switch between host-to-host mode or host-to-device mode?
thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89
. If necessary, I might also send the
> debugging output (however, as it's rather longish I skip it for the moment).
if you send me your debugging output off-list, I will have a look;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Ober
301 - 346 of 346 matches
Mail list logo