On Fri, Jan 08, 2010 at 08:23:00PM +0200, Timo Jyrinki wrote:
Hi,
Just FYI to the community list, as slowness has been one of the
biggest problems with Neo. Quite nice speedups are coming:
This is the single most incredible speedup so far! Big thanks to anyone
involved!
I'm running
On Wed, Jan 06, 2010 at 02:00:22PM +0100, Radek Polak wrote:
Ole Kliemann wrote:
with /etc/fb.modes as follows
mode 240x320
geometry 240 320 240 320 16
timings 10 8 88 2 2 8 2
endmode
Hi, i am using this setup together with:
echo qvga
On Sat, Jan 02, 2010 at 11:38:28PM +, Ole Kliemann wrote:
I figured it out this far:
The problem is independent of X. If you stop the Xserver and do
# echo qvga-normal /sys/bus/spi/devices/spi2.0/state
# fbset 240x320
with /etc/fb.modes as follows
mode 240x320
I figured it out this far:
The problem is independent of X. If you stop the Xserver and do
# echo qvga-normal /sys/bus/spi/devices/spi2.0/state
# fbset 240x320
with /etc/fb.modes as follows
mode 240x320
geometry 240 320 240 320 16
Trying to switch resolution to 240x320 on shr-unstable or shr-testing I
get the following problem.
/etc/fb.modes is:
mode 240x320
geometry 240 420 240 320 16
timings 10 8 88 2 2 8 2
accel false
endmode
With X running I do:
# xrandr -s 240x320
# fbset 240x320
Now two things can
On Wed, Oct 28, 2009 at 08:45:08PM +0300, Paul Fertser wrote:
Marcel tan...@googlemail.com writes:
- graphics in general are far too light, most colors become whiteish
- colored stripes horizontally over the whole display, but are invisible
on screenshots (naturally) - the same as above,
On Wed, Nov 04, 2009 at 03:41:47PM +0100, Sebastian Krzyszkowiak wrote:
On 11/4/09, Ole Kliemann ole-om-community-2...@mail.plastictree.net wrote:
On Wed, Oct 28, 2009 at 08:45:08PM +0300, Paul Fertser wrote:
Marcel tan...@googlemail.com writes:
- graphics in general are far too light
If I change /etc/enlightenment/default_profile to use the illume theme
instead of ASU, enlightenment segfaults only seconds after displaying
the pin dialog.
But I don't know if this way changing profiles is even supposed to work.
Ole
pgpGm2xjYlkWr.pgp
Description: PGP signature
On Fri, Dec 19, 2008 at 10:28:23PM +0800, John Lee wrote:
try disable qtopia under /etc/X11/Xsession.d first, restart X,
finish the config, move qtopia back...
Thanks all. This way it works.
Ole
pgpda5Ck6wBcw.pgp
Description: PGP signature
___
Hi everyone!
I have not been reading the lists lately, so I don't know if this is an
old one.
I have been suffering badly from WSOD. This means, often when I resumed
from suspend the screen showed all white while other things still
worked. Sometimes it recovered after some minutes and screen
Hi to everyone.
I already posted my point in an earlier discussion but didn't get much
of a reaction. The original post was this[1]. I will shortly reproduce
my main point here:
Me as well as several others - as I read here on the lists - have bought
our FR when it was released somehow expecting
On Sun, Oct 26, 2008 at 10:19:22AM +, Rui Miguel Silva Seabra wrote:
Right now a lot of positive action is needed. If OpenMoko dies the
hardware problems will NEVER be fixed, and the Free Software phone fails
totally (Google Android is fake Free Software if you don't have phones
into which
On Sun, Oct 26, 2008 at 11:44:35AM +0100, Matthias Apitz wrote:
Hello,
I'm a bit tired of all those (useless) threads like this. I DO USE the FR
with Om2008.9 for everyday use, I do not even own any other cellphone.
We should improve what we have and stop useless discussions, as well
about
On Sun, Oct 26, 2008 at 12:12:42PM +0100, Paul wrote:
On http://wiki.openmoko.org/wiki/Neo_FreeRunner everyone can read:
The FreeRunner can be purchased from the Online Store
http://www.openmoko.com as of July 3, 2008. The software available on
the phone makes it suitable for power users
On Sun, Oct 26, 2008 at 02:12:18PM +0100, Yorick Moko wrote:
On Sun, Oct 26, 2008 at 1:58 PM, Iain B. Findleton
[EMAIL PROTECTED] wrote:
Sorry to disagree. There was lots of info about how the FR was not ready
for prime time available when I bought mine. I think it is pretty clear
Don't
On Sun, Oct 26, 2008 at 02:22:08PM +, Stroller wrote:
So whining that it is not ready for the regular user is kind of
sad. ...
A new purchaser might not know to read the wiki. Such a notice should
also be on the Openmoko.com site, too, particularly pages around the
online store.
Hi Vasco,
On Sat, Oct 04, 2008 at 04:42:02PM +0100, [EMAIL PROTECTED] wrote:
To all, but especially OM.
I felt a little cheated when I saw the FR I had bought was not ready
to be used as a daily phone. This had in fact been the publicity by OM
at the time - GTA01 was for tinkerers, and
On Fri, Sep 05, 2008 at 08:15:34PM +0200, Marco Trevisan (Treviño) wrote:
Ole Kliemann wrote:
Has anybody ever tried to change the qtopia appearance? It's a bit out
of tune now.
I've tried it. But changing the Orange.conf color scheme doesn't seem to
affect its appearance. I must study
On Tue, Sep 02, 2008 at 07:49:25AM +0100, Stroller wrote:
An application should be able to wake up the phone from suspend (or
rather add an entry to the `at` queue saying wake me at this time) and
it should be able to fire up a GPRS connection. How long will it take to
check for new mail?
On Sun, Aug 31, 2008 at 03:27:41PM +0200, Torfinn Ingolfsen wrote:
Hello,
On Sun, Aug 31, 2008 at 3:16 PM, Michael Zanetti
[EMAIL PROTECTED] wrote:
If you are just working over ssh I have a small workaround for you. Most of
Ah - very useful - thank you. :-)
the time, before the Neo
On Mon, Sep 01, 2008 at 03:27:27PM +0100, Stroller wrote:
On 31 Aug 2008, at 12:46, Ole Kliemann wrote:
Are you by any chance associated with a VoIP company and afraid of
people making no-connect/no-cost calls all the time? ;-)
No, not at all.
But I figured that since you're going
On Mon, Sep 01, 2008 at 03:27:27PM +0100, Stroller wrote:
On 31 Aug 2008, at 12:46, Ole Kliemann wrote:
On Sun, Aug 31, 2008 at 06:37:05AM +0100, Stroller wrote:
As the son of Lancastrian blood, I can sympathise with
parsimoniousness, but right now Ole's suggestion appears penny
On Sun, Aug 31, 2008 at 06:37:05AM +0100, Stroller wrote:
As the son of Lancastrian blood, I can sympathise with
parsimoniousness, but right now Ole's suggestion appears penny-
pinching to me, rather than practical prudent economising.
Are you by any chance associated with a VoIP company
With my prepaid I have to pay traffic for every 10kb at 24ct/mb.
On Sun, Aug 31, 2008 at 06:44:31AM +0100, Stroller wrote:
I meant to ask in my previous email:
Anyone know what is the overhead of IMAP-idle?
Probably very low as long as the connection is stable. Every reconnect
due to
On Sun, Aug 31, 2008 at 12:30:23PM +, Ole Kliemann wrote:
With my prepaid I have to pay traffic for every 10kb at 24ct/mb.
On Sun, Aug 31, 2008 at 06:44:31AM +0100, Stroller wrote:
I meant to ask in my previous email:
Anyone know what is the overhead of IMAP-idle?
Probably very low
On Fri, Aug 29, 2008 at 10:21:13AM +0200, Florian Hackenberger wrote:
On Thursday 28 August 2008, Marco Trevisan (Treviño) wrote:
Is there a way to use this in om2008.8?
If you have a look at the qtopia documentation at [1], you'll notice
that their design is quite similar to FSO. They
On Sat, Aug 30, 2008 at 02:04:37PM +0930, Rod Whitby wrote:
Stroller wrote:
I thought the standard now was unlimited data plans.
...
You have my sympathies if you're not on an unlimited data plan, Ole,
but I would see unlimited data use as the long-term expectation of
OpenMoko
On Thu, Aug 28, 2008 at 01:10:25AM +0200, Michael 'Mickey' Lauer wrote:
If it doesn't need to be 2008.8, then you might want to give the frameworkd a
try, which has been written for exactly these things. There, it would be as
simple as (python example, but works with all kinds of languages of
On Wed, Aug 27, 2008 at 04:20:38PM -0700, Michael Shiloh wrote:
Ole Kliemann wrote:
Hi everyone!
I'd like to have a file where I put in
phonenumber /path/to/shellscript
Everytime an incoming call matches one of the numbers in this file,
the device just hangs up
On Thu, Aug 28, 2008 at 04:17:56PM +0200, Linus Gasser wrote:
Ole Kliemann a écrit :
What I was planning to do:
I have VoIP for telephony at home and asterisk running on my server. A
script on the server checks my email. If it finds new mail it calls the
FR. The FR does not accept
On Thu, Aug 28, 2008 at 03:29:32PM +0100, Joseph Reeves wrote:
2008/8/28 Ole Kliemann [EMAIL PROTECTED]:
I have VoIP for telephony at home and asterisk running on my server. A
script on the server checks my email. If it finds new mail it calls the
FR. The FR does not accept the connection
Hi everyone!
I'd like to have a file where I put in
phonenumber /path/to/shellscript
Everytime an incoming call matches one of the numbers in this file,
the device just hangs up and executes the corresponding script.
Does anyone have an idea how to do this? I guess it will require
On Wed, Aug 20, 2008 at 03:23:34PM +0200, Kevin Zuber wrote:
Hi,
I've just noticed on a new testing repository on
downloads.openmoko.org [1]. Are that the official update feeds for ASU
or another distribution? Is the merge of the two branches finished?
Should I use this repo instead of the
On Tue, Aug 12, 2008 at 07:43:11PM +0200, Rorschach wrote:
I installed:
http://buildhost.openmoko.org/daily/freerunner/200808/20080812/uImage-2.6.24+git33+88bf43840b9df0eb0a077a1394eb564be80a412e-r2-om-gta02.bin
First good news: * the battery-indicator is now fully working, showing if
On Sat, Aug 09, 2008 at 08:08:13PM +1000, Carsten Haitzler wrote:
please check the mail list archives about terminal and asu, and check the
keyboard in FSO. the keyboard in ASU is the qtopia keyboard. for better or
worse. illume has it's own internal keyboard that does give you all these
On Sun, Aug 03, 2008 at 01:01:19PM -0700, Jim Morris wrote:
Did you have to set any special Environment variables or paths to get this to
work?
I have installed the toolchain on a Ubuntu Linux system, and it gets quite a
long way through, but
end up getting this error eventually...
On Fri, Aug 01, 2008 at 10:23:30AM +0200, Jan Keymeulen wrote:
Hi,
I'm unable to get a GPS fix on my Freerunner, S/N 8A8602882. I'm using
a Linux om-gta02 2.6.24 #1 PREEMPT Wed Jul 30 11:56:48 CEST 2008
kernel with the stock 2007.2 that came with the Freerunner.
After trying agpsui as
On Fri, Aug 01, 2008 at 03:32:52PM -0400, Yaroslav Halchenko wrote:
Is there an easy way to upgrade qtopia installation without reflashing
whole rootfs? since /opt/Qtopia is not a part of any package according
to opkg search, thus is not 'opkg upgrade'able. 1 possibility I see is
to keep
On Fri, Aug 01, 2008 at 03:29:14PM -0400, Yaroslav Halchenko wrote:
Although the rest seems to be working quite fine, and even battery life
is tolerable, with pure qtopia I am experiencing 1 unpleasant effect
(which while writing this email unrolled a bit ;-)
I am running:
[EMAIL
On Fri, Aug 01, 2008 at 04:52:04PM -0400, Yaroslav Halchenko wrote:
indeed I could just extract opt/Qtopia from a fresh .jffs image whenever
new one becomes available, BUT that would not give me easy way to
upgrade the rest of the packages (non-qpe) to the same state as in that
image... I am
On Fri, Aug 01, 2008 at 05:11:31PM -0400, Yaroslav Halchenko wrote:
On Fri, 01 Aug 2008, Ole Kliemann wrote:
Create a build dir and run configure -device ficgta01 then build it.
just want to confirm -- for freerunner should it remain ficgta01 (I
don't see any other suitable under devices
On Wed, Jul 30, 2008 at 04:42:52PM -0400, Matthew Lane wrote:
When suspending, GSM calls DO wake the phone up, but SMS does not?
Also, when I resume from a suspend, I cannot send/receive SMS? Qtopia
also seems to have this problem..once I suspend I cannot receive SMS,
and I'm not even
On Wed, Jul 30, 2008 at 06:38:15AM +1000, lpotter wrote:
The patch I backported to 4.3 in Qtopia is this:
// try opening Unix98 pseudo tty
if ((masterFd = ::open(/dev/ptmx, O_RDWR | O_NONBLOCK, 0)) = 0) {
if (grantpt(masterFd) == 0) {
if (unlockpt(masterFd) ==
On Tue, Jul 29, 2008 at 12:39:32PM +1000, Lorn Potter wrote:
Qtopia runs the /opt/Qtopia/bin/ppp-network script.
Ok, now I know where to look.
I have fixed a few things I could see, but
haven't yet tested:
//depot/qtopia/main/devices/ficgta01/src/devtools/scripts/ppp-network#2
On Tue, Jul 29, 2008 at 12:24:50PM +1000, Lorn Potter wrote:
Ole Kliemann wrote:
On Sun, Jul 27, 2008 at 12:13:05PM +, Ole Kliemann wrote:
I'm trying to send an MMS with Qtopia. I set up GPRS and WAP through the
GUI, but it did not work; the network interface failed to start when
On Tue, Jul 29, 2008 at 12:39:32PM +1000, Lorn Potter wrote:
Ole Kliemann wrote:
On Mon, Jul 28, 2008 at 07:57:01PM +, Ole Kliemann wrote:
On Mon, Jul 28, 2008 at 06:32:18PM +, Ole Kliemann wrote:
Jul 28 16:29:29 om-gta02 user.notice Qtopia: Network : starting pppd
(non-demand
On Sun, Jul 27, 2008 at 12:13:05PM +, Ole Kliemann wrote:
I'm trying to send an MMS with Qtopia. I set up GPRS and WAP through the
GUI, but it did not work; the network interface failed to start when
sending. A look into the log shows this:
Jul 27 09:57:37 om-gta02 user.notice Qtopia
On Mon, Jul 28, 2008 at 06:32:18PM +, Ole Kliemann wrote:
Jul 28 16:29:29 om-gta02 user.notice Qtopia: Network : starting pppd
(non-demand) : /usr/sbin/pppd nodetach debug call dialup1217032395 password
simyo logfile /tmp/qtopia-0/qpe-pppd-log-dialup1217032395 connect
/opt/Qtopia/bin
On Mon, Jul 28, 2008 at 07:57:01PM +, Ole Kliemann wrote:
On Mon, Jul 28, 2008 at 06:32:18PM +, Ole Kliemann wrote:
Jul 28 16:29:29 om-gta02 user.notice Qtopia: Network : starting pppd
(non-demand) : /usr/sbin/pppd nodetach debug call dialup1217032395
password simyo logfile /tmp
I'm trying to send an MMS with Qtopia. I set up GPRS and WAP through the
GUI, but it did not work; the network interface failed to start when
sending. A look into the log shows this:
Jul 27 09:57:37 om-gta02 user.notice Qtopia: Network : Creating network
session for qtmail on
On Sat, Jul 26, 2008 at 04:54:16PM +0200, arne anka wrote:
yesterday in installed qtopia to an sd card to check it out, tried the
phone (worked) and went to bed.
the 2007.2 uses to resume frequently w/o any apparent reason -- as far as
i can tell the qtopia does not.
yet, it responses to
On Thu, Jul 24, 2008 at 02:40:49PM +, Ole Kliemann wrote:
So good would be if either the system would recognize `ss' as correct
wherever a sharp S is in a word (same for ue, ...).
It can be done this way:
I took the qtopia sources and compile them. A tool named `qdawggen' will
be build
The predictive keyboard using the german dictionary does not accept
`ss' for sharp S
`ue' for u-umlaut
`ae' for a-umlaut
`oe' for o-umlaut
When writing the german word `weiß' with a sharp S at the end,
`weiss' will not be accepted. You will get `weise', etc... because
`weiss' is actually no
On Thu, Jul 24, 2008 at 03:49:14PM +0200, arne anka wrote:
`weiss' is actually no german word at all.
how's that?
it's both a verb (from wissen) and and adjective/adverb (color)! and it's
correctly spelled (as far as correctly is a category because only
officials are compeled to use
On Wed, Jul 23, 2008 at 12:12:18PM +0200, Torfinn Ingolfsen wrote:
More info.
On Wed, Jul 23, 2008 at 12:04 PM, Torfinn Ingolfsen [EMAIL PROTECTED] wrote:
Anyway, today I did a 'opkg update' followed by a 'opkg upgrade'. The
upgrade went fine, and I rebooted my FR.
I repeated 'opkg
On Mon, Jul 21, 2008 at 07:46:42PM +0200, Holger Freyther wrote:
On Friday 18 July 2008 20:32:50 Ole Kliemann wrote:
Not sure whether I missed something. I am looking for a way to import
VCF into qtopia. I could only find the discussion on this list, which, as
far as I understand, covers
On Mon, Jul 21, 2008 at 05:34:47AM +, thewtex wrote:
Has anyone got the headset that comes with the Freerunner group purchase
working
with the qtopia.net images? There seems to be a small amount of sound coming
out somewhere. And speakerphone goes wacky. Maybe alsamixer settings?
I am
On Mon, Jul 21, 2008 at 12:31:44PM -0400, Dylan Reilly wrote:
On Fri, Jul 18, 2008 at 02:50:18PM +0100, Al Johnson wrote:
I noticed the high-pass, but came to acceptable results using
alsamixer's bass-boost options. My main concern is with the
distortion in the mids to highs. As far as I
On Sun, Jul 20, 2008 at 04:53:53AM -0600, michael irons wrote:
I tried flashing my freerunner with the image
openmoko-qtopia-x11-image-om-gta02.jffs2 from 07-20-2008 and After
booting it got to what looks like a desktop (with nothing on it)
except for the test or Loading Module. I assume the
On Sat, Jul 19, 2008 at 11:35:23AM +0200, julien cubizolles wrote:
Le vendredi 18 juillet 2008 à 13:39 +0100, Al Johnson a écrit :
It's getting woken by a message from the GSM. Mine does it on
reregistration
at variable intervals, maybe 3 times an hour. If it happens much more often
On Fri, Jul 18, 2008 at 02:50:18PM +0100, Al Johnson wrote:
On Friday 18 July 2008, Ole Kliemann wrote:
On Fri, Jul 18, 2008 at 02:17:05PM +0300, Timo Jyrinki wrote:
I had heard
about some resistor in wrong place resulting in high-pass filter and
basically making music listening
On Fri, Jul 18, 2008 at 02:17:05PM +0300, Timo Jyrinki wrote:
I had heard
about some resistor in wrong place resulting in high-pass filter and
basically making music listening unbearable.
Do you still remember where you read it?
I have some problems with the output of the headphone jack
Not sure whether I missed something. I am looking for a way to import
VCF into qtopia. I could only find the discussion on this list, which, as
far as I understand, covers importing VCF to the GTK addressbook only.
There is also a howto on importing Blackberry contacts to qtopia. It
could be
On Fri, Jul 18, 2008 at 06:32:50PM +, Ole Kliemann wrote:
Not sure whether I missed something. I am looking for a way to import
VCF into qtopia.
I should clarify this. I mean the qtopia-based ASU.
pgpe7B4ygRCrR.pgp
Description: PGP signature
I am using the daily ASU image from 20080715 having updated with opkg
today. As I understand, exposure is the app to change settings like
profiles, etc...
But exposure does not start. It shows in the status line `Starting
Exposure' but nothing happens. Isn't it implementated yet?
On Tue, Jul 15, 2008 at 12:42:07PM +0200, thomasg wrote:
Hi ppl,
I write this to community, not to devel or owners because everyone should
know:
*sbeh*, one of the people in #neo1973-germany IRC-channel found the reason
for the GPS problems.
The problem only occurs if a SD card is set in.
On Tue, Jul 15, 2008 at 01:52:36PM +0200, Marcus Bauer wrote:
who needs SD cards anyway ;-p
I need it for one single reason... to store map data for gps... o_0
pgpP87gy2VgHR.pgp
Description: PGP signature
___
Openmoko community mailing list
On Sun, Jul 13, 2008 at 03:48:14AM -0700, Russell Sears wrote:
Yes, there is still hope.
The current software drivers do not save any state between GPS locks, so
the GPS device is needlessly re-downloading information from the
satellites each time it turns on. Downloading the data seems
On Sat, Jul 12, 2008 at 11:42:26AM +0200, simarillion wrote:
Hello,
can somebody tell me if I will lose my warranty when I open my Freerunner. I
don't know if I am allowed to remove the seal which is on one of the two torx
screws. I don't want to solder just check the connection plug of
On Sat, Jul 12, 2008 at 08:11:45PM +0800, William Kenworthy wrote:
Does it make any difference to leave the gps running 15 minutes plus
(probably a few multiples of 15 minutes is best) then power off for a
few minutes and then back on?
My freerunner isnt here yet, but my experience on a
On Fri, Jul 11, 2008 at 01:36:11PM +0200, Alexander Paersch wrote:
Hi,
I have the same problem that my Freerunner can't acquire a fix without
a external GPS antenna.
Just today I stumbled upon a page on the openmoko wiki:
http://wiki.openmoko.org/wiki/FreeRunner_GPS_antenna_repair_SOP
I read, it is intended for end-users
but not yet quite end-user-capable. I wasn't sure whether this is a
question of software only, or one of hardware too.
Software only.
Freerunner is supposed to be the final design.
That's exactly what I wanted to hear. :)
pgpYR0VLswxvI.pgp
On Mon, Jul 07, 2008 at 10:44:16PM +0200, Jay Vaughan wrote:
Or will there be another hardware iteration then, eventually making it
necessary to change the hardware?
.. the interest in the older platforms and the newer platforms is only
going to pale as newer platforms are introduced,
Hi everyone!
I'd first like to say how excited I am about the Freerunner. I am an
enthusiastic linux user who likes to customize every aspect to create a
workflow that just fits. So a customizable phone is what I have been
looking for. A big thanks to all involved in the project, you are doing
74 matches
Mail list logo